summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-05ARM: dts: am335x-evmsk: enable dual_emac modeYegor Yefremov1-0/+3
EVM board provides two Ethernet ports, this patch sets them into dual_emac mode to provide two independent network interfaces. Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: DRA7: Add device nodes for ABBNishanth Menon1-0/+132
Add ABB device nodes for DRA7 family of devices. Data is based on DRA7 Technical Reference Manual revision I (Sept 2013) Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: OMAP4: Add device nodes for ABBAndrii.Tseglytskyi3-0/+89
Add ABB device nodes for OMAP443x family of devices. abb_iva is populated, but disabled as it is not used on current OMAP443x family, but the node is used on OMAP446x family. Data is based on OMAP443x Technical Reference Manual revision AN (April 2013). ABB device nodes for OMAP4460 device Data is based on OMAP4460 Technical Reference Manual revision Z (April 2013) [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: OMAP36xx: Add device node for ABBAndrii.Tseglytskyi1-0/+20
Add ABB device node for OMAP36xx family of devices. Data is based on OMAP36XX Technical Reference Manual revision AB (Dec 2012). [nm@ti.com: co-developer] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am43x-epos-evm: add SD card hotplug supportBalaji T K2-0/+10
Add card detect gpio for SD card slot and include dt gpio header. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am335x-evm: add SD card hotplug supportBalaji T K1-0/+9
Add card detect gpio for SD card slot Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: am437x gp-evm: add sd card dt nodesBalaji T K1-0/+27
enable sd card slot on am437x-gp-evm Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: omap5: added dt properties to adapt to the new phy framworkKishon Vijay Abraham I1-1/+4
Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt and Documentation/devicetree/bindings/phy/ti-phy.txt. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-05ARM: dts: remove bcm11351-brt.dtsMatt Porter2-56/+1
The BCM11351 BRT board will never see the light of day. Remove the BRT dts since it is not maintainable. Reviewed-by: Alex Elder <elder@linaro.org> Reviewed-by: Christian Daudt <bcm@fixthebug.org> Reviewed-by: Markus Mayer <markus.mayer@linaro.org> Signed-off-by: Matt Porter <mporter@linaro.org>
2014-03-04ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSKImre Kaloz2-0/+50
Enable the WiLink6 connected to mmc2. Signed-off-by: Imre Kaloz <kaloz@openwrt.org Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Update echi-omap DT binding example usageRoger Quadros2-2/+2
Remove non-compatible id from examples. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Get rid of incompatible ids for hci-omap USB host nodesRoger Quadros3-6/+6
The OMAP EHCI and OHCI controllers are not compatible with drivers other than "ti,ehci-omap" and "ti,ohci-omap3" respectively, so get rid of the incompatible ids. CC: Alan Stern <stern@rowland.harvard.edu> CC: Nishant Menon <nm@ti.com> CC: Kevin Hilman <khilman@linaro.org> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: OMAP2+: Remove legacy_init_ehci_clk()Roger Quadros3-28/+4
The necessary clock phandle for the EHCI clock is now provided via device tree so we no longer need this legacy method. Update the omap4-panda and omap5-uevm board DTS to provide the necessary EHCI PHY clock information. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: dts: Add support for OMAP4 Gumstix DuoVero/ParlorFlorian Vaussard4-0/+402
Gumstix DuoVero is an OMAP4430-based Computer On Module. Parlor is one of the available expansion board. Tested features: - GPMC ethernet - HSUSB2 and OTG - Audio out - WiFi and Bluetooth (w2cbw0015 SDIO module) - LED and button Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-03-04ARM: sun4i: dt: Add support for the INet-97F_Rev_02 boardDavid Lanzendörfer2-0/+70
This patch adds basic support for the INet-97F_Rev_02 board found in various low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02) Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME boardHans de Goede2-0/+112
This add support for the A10-OLinuXino-LIME: https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dtsZalan Blenessy1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to cubieboard2 dtsRoman Byshko1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to cubietruck dtsHans de Goede1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-microHans de Goede1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-microHans de Goede1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to A13-OlinuxinoRoman Byshko1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to pcduino.dtsHans de Goede1-0/+31
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to mini-xplus dtsHans de Goede1-0/+31
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to hackberry dtsHans de Goede1-0/+40
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Based on fex file settings, the fex file also contains a mysterious line: usb_hub_vcc_en_gpio = port:PB09<1><0><default><0> Which also clashes with usbc0, which has: usb_drv_vbus_gpio = port:PB09<1><0><default><0> So if usb does not work properly we need someone with a hackberry to look closer into this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to cubieboard dtsRoman Byshko1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to Mele A1000 dtsRoman Byshko1-0/+31
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host bindingsRoman Byshko1-0/+52
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host bindingsRoman Byshko2-0/+64
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host bindingsRoman Byshko1-0/+52
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add ahci / sata supportHans de Goede4-0/+47
This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add ahci / sata supportOliver Schinagl3-0/+22
This patch adds sunxi sata support to A10 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sunxi: dt: Add sunxi-common-regulators include fileHans de Goede1-0/+75
Most sunxi boards with a sata connector also have a gpio controlled connector for sata target power and almost all sunxi boards have a gpio controlled vbus for usb1 and usb2. This commit adds an include file for the regulators representing these supplies, avoiding the need to copy and paste the regulator code to allmost all sunxi board dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: mvebu: move DT Dove to MVEBUSebastian Hesselbarth6-26/+22
With all the DT support preparation done, we are able to move Dove to MVEBU easily. Legacy non-DT mach-dove is left untouched to rot for a while before removal. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: dove: add system controller nodeSebastian Hesselbarth1-0/+5
This adds a DT node for the system-controller found on Marvell Dove SoCs. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: kirkwood: Add dts file describing HP T5325 thin clientAndrew Lunn2-0/+209
Describe the T5325 using device tree properties, where possible. The first version of this file was produced by Thomas Petazzoni. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: kirkwood: Add i2c alias so setting bus numberAndrew Lunn1-1/+2
When using platform_driver instantiation, the i2c bus was given bus number 0. The kirkwood-t5325 audio driver has this bus number hard coded for the address of the codec. However by default device tree i2c busses are dynamically allocated a bus number, starting from 1. Thus the kirkwood-t5325 cannot find its audio codec. By adding an alias in the DT file we can control the bus number and set it to 0. The codec can then be found. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: kirkwood: Add audio node to kirkwood.dtsiAndrew Lunn1-0/+9
The binding has existed for a while, so add the missing node so it can be used by devices. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: mvebu: select dtbs from MACH_ARMADA_*Jason Cooper1-4/+8
With kirkwood migrating into mach-mvebu, mvebu_v5_defconfig needs to select ARCH_MVEBU. Unfortunately, this means that when building a v5 kernel, we unnecessarily build dtbs for the armada v7 boards. To fix this, we instead select based on MACH_ARMADA_* on a per SoC basis. Reported-by: Kevin Hilman <khilman@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04Merge branch 'mvebu/dt-3xx' into mvebu/dtJason Cooper7-0/+1314
2014-03-04ARM: dove: add global-config register nodeSebastian Hesselbarth1-0/+6
We share global config registers by syscon node, add it to dove.dtsi. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: dove: add additional pinctrl registersSebastian Hesselbarth1-1/+3
Dove pinctrl uses additional registers to control MPPs. This patch first increases existing pinctrl reg property by one register, and then adds two new ranges for MPP4 and PMU MPP registers. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: mvebu: Instantiate system controller in kirkwood.dtsiAndrew Lunn1-0/+5
Make use of the mvebu system controller, by placing a node into the dtsi file. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04ARM: kirkwood: Instantiate L2 cache from DT.Andrew Lunn1-0/+5
Now that the Feroceon L2 cache has a DT binding, make use of it. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-03-04mfd: dbx500/abx500: root out hardcoded IRQ assignmentsLinus Walleij9-263/+36
The DBx500 and ABx500 should be getting their IRQs from the device tree and nowhere else. Get rid of all the static assignments everywhere, delete it from the driver, platform data and the board files in one swift strike. Lots of cross-dependencies in the MFD drivers for PRCMU and AB8500 makes it necessary to strike everywhere at once to eradicate IRQs passed as resources and platform data to the left and right around the platform. Cc: Mark Brown <broonie@kernel.org> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-04ARM: ux500: drop a chunk of GPIO definitionsLinus Walleij1-69/+0
The Ux500 GPIOs are now assigned dynamically from the device tree. Drop this table of static assignments. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-03Merge tag 'for_3.15/dts_signed' of ↵Tony Lindgren746-4072/+9822
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.15/dt Add craneboard devices Add more N900 devices Add am43x-epos-evm and am437x-gp-evm devices Add OMAP4 DMM devices Conflicts: arch/arm/boot/dts/am43x-epos-evm.dts arch/arm/boot/dts/dra7.dtsi
2014-03-03ARM: dts: omap4+: Add DMM bindingsArchit Taneja4-0/+43
Add Dynamic Memory Manager (DMM) bindings for OMAP4 and OMAP5 and DRA7x devices. DMM only requires address and irq information. Add documentation for the DMM bindings. Originally worked on by Andy Gross <andygro@gmail.com> Cc: Andy Gross <andygro@gmail.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-03ARM: dts: am43x-gp-evm: Add matrix gpio keys.Sourav Poddar1-0/+21
Add gpio keys node for am43x gp evm. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
2014-03-02ARM: dts: am43xx: add support for parallel NAND flashPekon Gupta2-0/+131
This patch: - enables GPMC h/w and ELM h/w engine for AM43xx devices (am4372.dtsi) - adds pinmux and DT node for Micron 4K-paged x8 NAND device (MT29F4G08AB) present on following boards: am43x-epos-evm: On this board, NAND Flash control lines are muxed with QSPI, Thus only one of the two can be used at a time. Selection is controlled by: (a) dynamically driving following GPIO pin from software GPMC_A0(GPIO) == 0 NAND is selected (default) GPMC_A0(GPIO) == 1 eMMC is selected Signed-off-by: Pekon Gupta <pekon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 20:59:50 +0300