summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-24arm64: dts: qcom: Fix IPQ8074 PCIe PHY nodesShawn Guo1-10/+36
IPQ8074 PCIe PHY nodes are broken in the many ways: - '#address-cells', '#size-cells' and 'ranges' are missing. - Child phy/lane node is missing, and the child properties like '#phy-cells' and 'clocks' are mistakenly put into parent node. - The clocks properties for parent node are missing. Fix them to get the nodes comply with the bindings schema. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-9-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8998-clamshell: Add missing vdda suppliesShawn Guo1-0/+2
'vdda-phy-supply' and 'vdda-pll-supply' are required properties. Add them to fix the dtbs_check warnings below. phy@1da7000: 'vdda-phy-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml phy@1da7000: 'vdda-pll-supply' is a required property arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-8-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop reg-names from QMP PHY nodesShawn Guo3-3/+0
The 'reg-names' is not a supported/used property. Drop it from QMP PHY nodes to fix dtbs_check warnings like below. phy-wrapper@88e9000: 'reg-names' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' arch/arm64/boot/dts/qcom/sm8350-hdk.dt.yaml arch/arm64/boot/dts/qcom/sm8350-mtp.dt.yaml Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-7-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Drop max-microamp and vddp-ref-clk properties from QMP PHYShawn Guo12-29/+0
The following properties are not supported and causing dtbs_check warnings. - vdda-phy-max-microamp - vdda-pll-max-microamp - vddp-ref-clk-max-microamp - vddp-ref-clk-always-on Drop them from QMP PHY nodes. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-6-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: Correct QMP PHY child node nameShawn Guo8-25/+25
Many child nodes of QMP PHY are named without following bindings schema and causing dtbs_check warnings like below. phy@1c06000: 'lane@1c06800' does not match any of the regexes: '^phy@[0-9a-f]+$' arch/arm64/boot/dts/qcom/msm8998-asus-novago-tp370ql.dt.yaml arch/arm64/boot/dts/qcom/msm8998-hp-envy-x2.dt.yaml arch/arm64/boot/dts/qcom/msm8998-lenovo-miix-630.dt.yaml arch/arm64/boot/dts/qcom/msm8998-mtp.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dt.yaml arch/arm64/boot/dts/qcom/msm8998-oneplus-dumpling.dt.yaml Correct them to fix the warnings. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-5-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: msm8996: Move '#clock-cells' to QMP PHY child nodeShawn Guo4-8/+5
'#clock-cells' is a required property of QMP PHY child node, not itself. Move it to fix the dtbs_check warnings. There are only '#clock-cells' removal from SM8350 QMP PHY nodes, because child nodes already have the property. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-4-shawn.guo@linaro.org
2021-10-24arm64: dts: qcom: sc7280: Add 200MHz in qspi_opp_tableRajesh Patil1-0/+5
Add 200MHz OPP in qspi_opp_table Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632892123-11006-1-git-send-email-rajpat@codeaurora.org
2021-10-24arm64: dts: qcom: pmk8350: Make RTC disabled by default; enable on sc7280-idpDouglas Anderson3-0/+9
The RTC on the pmk8350 is not useful on all boards. Some boards may not provide backup power to the PMIC but might have another RTC on the board that does have backup power. In this case it's better to not use the RTC on the PMIC. At the moment, the only boards that includes this PMIC are sc7280-idp and sc7280-idp2. On sc7280-idp I'm not aware of any other RTCs, but sc7280-idp2 has a Chrome OS EC on it and this is intended to provide the RTC for the AP. Let's do what we normally do for hardware that's not used by all boards and set it to a default status of "disabled" and then enable it on the boards that need it. NOTE: for sc7280-idp it's _possible_ we might also want to add `allow-set-time;`. That could be the subject of a future patch if it is indeed true. Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Satya Priya <skakit@codeaurora.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> [bjorn: Enable the RTC on the MTP as well] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929153553.1.Ib44c2ac967833d7a3f51452d44d15b7b8d23c1f0@changeid
2021-10-24arm64: dts: qcom: ipq8074: Add QUP5 I2C nodeChukun Pan1-0/+15
Add node to support the QUP5 I2C controller inside of IPQ8074. It is exactly the same as QUP2 controllers. Some routers like ZTE MF269 use this bus. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211001145421.18302-1-amadeus@jmu.edu.cn
2021-10-24arm64: dts: qcom: qrb5165-rb5: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Robotics Board RB5. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-2-amit.pundir@linaro.org
2021-10-24arm64: dts: qcom: sdm845-db845c: Add msm-id and board-idAmit Pundir1-0/+2
Add qcom,msm-id and qcom,board-id for Dragonboard 845c. This will help us boot the device with newer Android boot image header versions, which package dtb separately instead of the default Image.gz-dtb (appended dtb) format. Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210930185742.117928-1-amit.pundir@linaro.org
2021-10-24arm64: dts: qcom: sdm845: Move gpio.h inclusion to SoC DTSIKonrad Dybcio7-6/+1
Almost any board that boots and has a way to interact with it (say for the rare cases of just-pstore or let's-rely-on-bootloader-setup) needs to set some GPIOs, so it makes no sense to include gpio.h separately each time. Hence move it to SoC DTSI. Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-6-konrad.dybcio@somainline.org
2021-10-24arm64: dts: qcom: sdm845: Add size/address-cells to dsi[01]Konrad Dybcio4-9/+6
Add the aforementioned properties in the SoC DTSI so that everybody doesn't have to copy that into their device DTs, effectively reducing code duplication. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-5-konrad.dybcio@somainline.org
2021-10-24arm64: dts: qcom: sdm845: Don't disable MDP explicitlyKonrad Dybcio7-26/+0
DPU/MDSS is borderline useless without MDP, so disabling both of them makes little sense. With this change, enabling mdss will be enough. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-4-konrad.dybcio@somainline.org
2021-10-24arm64: dts: qcom: sdm845: Disable Adreno, modem and Venus by defaultKonrad Dybcio7-0/+69
Components that rely on proprietary (not to mention signed!) firmware should not be enabled by default, as lack of the aforementioned firmware could cause various issues, from random errors to straight-up failing to boot. Re-enable these remote processors on boards that didn't previously explicitly disable them. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Tested-By: Steev Klimaszewski <steev@kali.org> [bjorn: Added missing changes to db845c and lenovo-yoga-c630 to the patch] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-3-konrad.dybcio@somainline.org
2021-10-24arm64: dts: qcom: sdm845: Add XO clock to SDHCIKonrad Dybcio1-2/+3
Add the missing XO clock to the SDHCI controller. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211002001358.45920-2-konrad.dybcio@somainline.org
2021-10-24ARM: dts: qcom: msm8916-samsung-serranove: Include dts from arm64Stephan Gerhold2-0/+4
After adding all necessary support for MSM8916 SMP/cpuidle without PSCI on ARM32, build the Samsung Galaxy S4 Mini VE device tree from the arm64 tree together with the ARM32 include to allow booting this device on ARM32. The approach to include device tree files from other architectures is inspired from e.g. the Raspberry Pi (bcm2711-rpi-4-b.dts) where this is used to build the device tree for both ARM32 and ARM64. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-15-stephan@gerhold.net
2021-10-24ARM: dts: qcom: msm8916: Add include for SMP without PSCI on ARM32Stephan Gerhold1-0/+62
Add a special device tree include for MSM8916 on ARM32 that sets up SMP and cpuidle without PSCI. This is meant for devices with signed firmware that does not support PSCI and only allows booting ARM32 kernels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-14-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916: Add CPU ACC and SAW/SPMStephan Gerhold1-0/+56
Add the device tree nodes necessary for SMP bring-up and cpuidle without PSCI on ARM32. The hardware is typically controlled by the PSCI implementation in the TrustZone firmware and is therefore marked as status = "reserved" by default (from the device tree specification): "Indicates that the device is operational, but should not be used. Typically this is used for devices that are controlled by another software component, such as platform firmware." Since this is part of the MSM8916 SoC it should be added to msm8916.dtsi but in practice these nodes should only get enabled via an extra include on ARM32. This is necessary for some devices with signed firmware which is missing both ARM64 and PSCI support and can therefore only boot ARM32 kernels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-13-stephan@gerhold.net
2021-10-24ARM: qcom: Add ARCH_MSM8916 for MSM8916 on ARM32Stephan Gerhold1-0/+10
Add a CONFIG_ARCH_MSM8916 option to enable building MSM8916 support on ARM32. Note that since ARM64 is the main supported architecture for MSM8916 this is only intended for testing and for devices where signed firmware does not allow booting ARM64 kernels. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004204955.21077-7-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-samsung-serranove: Add NFCStephan Gerhold1-0/+50
The LTE version of the S4 Mini VE has a NXP PN547, which is supported by the nxp-nci-i2c driver in mainline. It seems to detect NFC tags using "nfctool" just fine, although more testing is difficult given there seem to be very few useful applications making use of the Linux NFC subsystem. :( Note that for some reason Samsung decided to connect the I2C pins to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging with i2c-gpio. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-7-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-samsung-serranove: Add rt5033 batteryStephan Gerhold1-0/+23
Like the Samsung Galaxy A3/A5, the S4 Mini VE uses a Richtek RT5033 PMIC as battery fuel gauge, charger, flash LED and for some regulators. For now, only add the fuel gauge/battery device to the device tree, so we can check the remaining battery percentage. The other RT5033 drivers need some more work first before they can be used properly. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-6-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-samsung-serranove: Add IMUStephan Gerhold1-0/+23
Add the STMicroelectronics LSM6DS3 IMU that is used in the S4 Mini VE to the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-5-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-samsung-serranove: Add touch keyStephan Gerhold1-0/+87
Add the CORERIVER TC360 touch key together with the two necessary fixed regulators for it. Note that for some reason Samsung decided to connect this to GPIOs where no hardware I2C bus is available, so we need to fall back to software bit-banging using i2c-gpio. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-4-stephan@gerhold.net
2021-10-24arm64: dts: qcom: msm8916-samsung-serranove: Add touch screenStephan Gerhold1-0/+50
Like msm8916-samsung-a3u-eur, the S4 Mini VE uses a Zinitix BT541 touch screen. Add it together with the necessary fixed-regulator to the device tree. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-3-stephan@gerhold.net
2021-10-24arm64: dts: qcom: Add device tree for Samsung Galaxy S4 Mini Value EditionStephan Gerhold2-0/+302
The Samsung Galaxy S4 Mini Value Edition is an updated version of the original S4 Mini based on MSM8916. It is similar to the other Samsung devices based on MSM8916 with only a few minor differences. The device tree contains initial support for the S4 Mini Value Edition with: - UART - eMMC/SD card (needs quirk for some reason) - Buttons - Vibrator - WiFi/Bluetooth (WCNSS) - USB Unfortunately, the S4 Mini VE was released with outdated 32-bit only firmware and never received any update from Samsung. Since the 32-bit TrustZone firmware is signed there seems to be no way currently to actually boot this device tree on arm64 Linux at the moment. :( However, it is possible to use this device tree by compiling an ARM32 kernel instead. The device tree can be easily built on ARM32 with an #include and it works really well there. To avoid confusion for others it is still better to add this device tree on arm64. Otherwise it's easy to forget to update this one when making some changes that affect all MSM8916 devices. Maybe someone finds a way to boot ARM64 Linux on this device at some point. In this case I expect that this device tree can be simply used as-is. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211004201921.18526-2-stephan@gerhold.net
2021-10-24arm64: dts: qcom: sm7225: Add device tree for Fairphone 4Luca Weiss2-0/+321
Add device tree for the Fairphone 4 smartphone which is based on Snapdragon 750G (sm7225) which is basically sm6350. Currently supported are UART, physical buttons (power & volume), screen (based on simple-framebuffer set up by the bootloader), regulators and USB. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-12-luca@z3ntu.xyz
2021-10-24arm64: dts: qcom: Add SM7225 device treeLuca Weiss1-0/+16
The Snapdragon 750G (sm7225) is software-wise very similar to Snapdragon 690 (sm6350) with minor differences in clock speeds and as added here, it uses the Kryo 570 instead of Kryo 560. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-11-luca@z3ntu.xyz
2021-10-24dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 boardLuca Weiss1-0/+6
Add binding documentation for Fairphone 4 smartphone which is based on Snapdragon 750G (sm7225). Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-10-luca@z3ntu.xyz
2021-10-24dt-bindings: arm: cpus: Add Kryo 570 CPUsLuca Weiss1-0/+1
Document Kryo 570 CPUs found in Qualcomm Snapdragon 750G (SM7225). Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-9-luca@z3ntu.xyz
2021-10-24arm64: dts: qcom: sm6350: add debug uartLuca Weiss1-0/+31
Add the necessary nodes for the debug uart on SM6350. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-8-luca@z3ntu.xyz
2021-10-24arm64: dts: qcom: Add PM6350 PMICLuca Weiss1-0/+54
PM6350 is used in SM6350 and provides similar functionality to other Qualcomm PMICs. Add the pon node with power & volume key and the gpios. Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211007212444.328034-7-luca@z3ntu.xyz
2021-10-24arm64: dts: qcom: sa8155p-adp: Enable remoteproc capabilitiesBhupesh Sharma1-0/+10
Enable two of the remoteprocs found on SA8155p platform - 'audio and compute'. Also specify firmware path for them. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928140929.2549459-3-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: sm8150: Add fastrpc nodesBhupesh Sharma1-0/+119
Add fastrpc nodes for sDSP, cDSP, and aDSP. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928140929.2549459-2-bhupesh.sharma@linaro.org
2021-10-24arm64: dts: qcom: sm8350: Add fastrpc nodesOla Jeppsson1-0/+118
Add fastrpc nodes for sDSP, cDSP, and aDSP. Signed-off-by: Ola Jeppsson <ola@snap.com> Acked-by: Heinrich Fink <hfink@snap.com> Acked-by: Olivier Schonken <oschonken@snapchat.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211018085017.1549494-1-ola@snap.com
2021-10-21arm64: dts: qcom: sdm845-oneplus: enable second wifi channelCaleb Connolly1-0/+7
Like the c630, the OnePlus 6 is also capable of using both antenna channels for 2.4 and 5ghz wifi, however unlike the c630 only the first channel is used for bluetooth. Signed-off-by: Caleb Connolly <caleb@connolly.tech> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020163557.291803-1-caleb@connolly.tech
2021-10-18arm64: dts: qcom: pm8994: add interrupt controller propertiesDmitry Baryshkov1-8/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-26-dmitry.baryshkov@linaro.org
2021-10-18arm64: dts: qcom: pm8916: add interrupt controller propertiesDmitry Baryshkov1-4/+2
Now that the pmic-mpp is a proper hierarchical IRQ chip, add interrupt controller properties ('interrupt-controller' and '#interrupt-cells'). The interrupts property is no longer needed so remove it. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-25-dmitry.baryshkov@linaro.org
2021-10-18arm64: dts: qcom: apq8016-sbc: fix mpps state namesDmitry Baryshkov1-2/+2
The majority of device tree nodes for mpps use xxxx-state as pinctrl nodes. Change names of mpps pinctrl nodes for the apq8016-sbc board to follow that pattern. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-13-dmitry.baryshkov@linaro.org
2021-10-18arm64: dts: qcom: pm8994: fix mpps device tree nodeDmitry Baryshkov1-1/+2
Add missing "qcom,spmi-mpp" to the compatible list as required by the node description. Also add gpio-ranges property to mpps device tree node, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-12-dmitry.baryshkov@linaro.org
2021-10-18arm64: dts: qcom: pm8916: fix mpps device tree nodeDmitry Baryshkov1-1/+2
Add missing "qcom,spmi-mpp" to the compatible list as required by the node description. Also add gpio-ranges property to mpps device tree node, adding the mapping between pinctrl and GPIO pins. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008012524.481877-11-dmitry.baryshkov@linaro.org
2021-10-17arm64: dts: qcom: Enable RPM Sleep statsMaulik Shah5-0/+25
Add device node for Sleep stats driver which provides various low power mode stats on msm8996, msm8998, qcs404, sdm630 and sm6125. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634107104-22197-6-git-send-email-mkshah@codeaurora.org
2021-10-17arm64: dts: qcom: Enable RPMh Sleep statsMaulik Shah5-5/+30
Add device node for Sleep stats driver which provides various low power mode stats on sc7180, sc7280, sm8150, sm8250 and sm8350. Also update the reg size of aoss_qmp device to 0x400. Cc: devicetree@vger.kernel.org Signed-off-by: Maulik Shah <mkshah@codeaurora.org> Tested-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1634107104-22197-5-git-send-email-mkshah@codeaurora.org
2021-10-17arm64: dts: sc7180: Support Parade ps8640 edp bridgePhilip Chen1-0/+109
Add a dts fragment file to support the sc7180 boards with the second source edp bridge, Parade ps8640. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008113839.v3.2.I187502fa747bc01a1c624ccf20d985fdffe9c320@changeid
2021-10-17arm64: dts: sc7180: Factor out ti-sn65dsi86 supportPhilip Chen7-86/+95
Factor out ti-sn65dsi86 edp bridge as a separate dts fragment. This helps us introduce the second source edp bridge later. Signed-off-by: Philip Chen <philipchen@chromium.org> Reviewed-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211008113839.v3.1.Ibada67e75d2982157e64164f1d11715d46cdc42c@changeid
2021-10-17arm64: dts: qcom: add 'chassis-type' propertyArnaud Ferraris49-0/+51
A new 'chassis-type' root node property has recently been approved for the device-tree specification, in order to provide a simple way for userspace to detect the device form factor and adjust their behavior accordingly. This patch fills in this property for end-user devices (such as laptops, smartphones and tablets) based on Qualcomm ARM64 processors. Signed-off-by: Arnaud Ferraris <arnaud.ferraris@collabora.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> # msm8916 Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211016102025.23346-4-arnaud.ferraris@collabora.com
2021-10-15arm64: dts: qcom: sm8250: remove mmcx regulatorDmitry Baryshkov1-9/+4
Switch dispcc and videocc into using MMCX domain directly. Drop the now unused mmcx regulator. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829154757.784699-7-dmitry.baryshkov@linaro.org
2021-10-15arm64: dts: qcom: sc7180: Add qspi compatibleRajesh Patil1-1/+1
Add "qcom,sc7180-qspi" compatible in qspi node Signed-off-by: Rajesh Patil <rajpat@codeaurora.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1632997450-32293-3-git-send-email-rajpat@codeaurora.org
2021-10-15arm64: dts: qcom: sdm845: Drop standalone smem nodeBjorn Andersson1-7/+3
Now that the SMEM binding and driver allows the SMEM node to be described in the reserved-memory region directly, move the compatible and hwlock properties to the reserved-memory node and drop the standadlone node. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Link: https://lore.kernel.org/r/20210930182111.57353-5-bjorn.andersson@linaro.org
2021-10-15arm64: dts: qcom: msm8916: Drop underscore in node nameStephan Gerhold1-1/+1
Using underscores in device tree nodes is not very common. Additionally, the _region suffix in "smem_region@..." is not really useful since it's obvious that it describes a reserved memory region. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210921152120.6710-2-stephan@gerhold.net
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 07:21:32 +0300