summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-26Merge tag 'qcom-dts-for-5.16-2' of ↵Arnd Bergmann25-132/+94
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt Qualcomm DTS more changes for v5.16 The multi-purpose-pin (MPP) driver is finally migrated to use hierarchical IRQ domains, so this bring the associated changes. The remainder of the changes are correcting binding issues, primarily found through DT validation. * tag 'qcom-dts-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (26 commits) ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node ARM: dts: qcom: fix thermal zones naming ARM: dts: qcom: fix flash node naming for RB3011 ARM: dts: qcom: correct mmc node naming ARM: dts: qcom: fix memory and mdio nodes naming for RB3011 dt-bindings: arm: qcom: Fix Nexus 4 vendor prefix ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dts dt-bindings: arm: qcom-ipq4019: add missing device compatible ARM: dts: qcom: apq8026-lg-lenok: rename board vendor dt-bindings: arm: qcom: rename vendor of apq8026-lenok ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY node ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548 ARM: dts: qcom-pma8084: add interrupt controller properties ARM: dts: qcom-pm8941: add interrupt controller properties ARM: dts: qcom-pm8841: add interrupt controller properties ARM: dts: qcom-msm8660: add interrupt controller properties ARM: dts: qcom-mdm9615: add interrupt controller properties ARM: dts: qcom-apq8064: add interrupt controller properties ARM: dts: qcom-apq8060-dragonboard: fix mpps state names ARM: dts: qcom-mdm9615: add gpio-ranges to mpps node, fix its name ... Link: https://lore.kernel.org/r/20211026135855.1205262-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-dt64-5.16-2' of ↵Arnd Bergmann3-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM64 changes for v5.16, part two 1. Add chassis-type property. 2. Add ChipID node to ExynosAutov9 DTSI. * tag 'samsung-dt64-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: arm64: dts: exynos: add chipid node for exynosautov9 SoC arm64: dts: exynos: add 'chassis-type' property Link: https://lore.kernel.org/r/20211026094709.75692-4-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'samsung-dt-5.16-2' of ↵Arnd Bergmann16-0/+16
git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.16, part two Add chassis-type property. * tag 'samsung-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: s5pv210: add 'chassis-type' property ARM: dts: exynos: add 'chassis-type' property Link: https://lore.kernel.org/r/20211026094709.75692-3-krzysztof.kozlowski@canonical.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26Merge tag 'at91-dt-5.16-2' of ↵Arnd Bergmann2-0/+39
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt AT91 DT #2 for 5.16: - Add DT nodes for TCB and RTC blocks on SAMA7G5 - Add TCB0 for clocksource and clockevent functionality fallback only in case PIT64B will fail to probe and as a testbed for this feature on the Evaluation Kit. * tag 'at91-dt-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ce ARM: dts: at91: sama7g5: add tcb nodes ARM: dts: at91: sama7g5: add rtc node Link: https://lore.kernel.org/r/20211025163428.26285-1-nicolas.ferre@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update ICST clock nodes 'reg' and node namesRob Herring7-31/+68
Add a 'reg' entry for ICST clock nodes on the Arm Ltd platforms. The 'reg' entry is the VCO register address. With this, the node name can be updated to use a generic node name, 'clock-controller', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232239.211822-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26ARM: dts: arm: Update register-bit-led nodes 'reg' and node namesRob Herring9-57/+144
Add a 'reg' entry for register-bit-led nodes on the Arm Ltd platforms. The 'reg' entry is the LED control register address. With this, the node name can be updated to use a generic node name, 'led', and a unit-address. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211024232003.211484-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-26arm64: dts: exynos: add chipid node for exynosautov9 SoCChanho Park1-0/+5
It can be compatible with exynos850's chipid. The SoC has eight chipid registers that can be used for OTP. Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20211021012017.158919-3-chanho61.park@samsung.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-10-25ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor nodeDavid Heidelberg1-1/+1
I added the missing dash inside the thermal-sensor-cells. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020203723.233578-1-david@ixit.cz
2021-10-24ARM: dts: qcom: fix thermal zones namingDavid Heidelberg4-26/+26
Rename thermal zones according to dt-schema. Fix warnings like: arch/arm/boot/dts/qcom-apq8064-cm-qs600.dt.yaml: thermal-zones: 'cpu-thermal0', 'cpu-thermal1', 'cpu-thermal2', 'cpu-thermal3' do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,12}-thermal$', 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/thermal/thermal-zones.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020180002.195467-1-david@ixit.cz
2021-10-24ARM: dts: qcom: fix flash node naming for RB3011David Heidelberg1-1/+1
rename node to comply with dt-schema Fix warning: arch/arm/boot/dts/qcom-ipq8064-rb3011.dt.yaml: s25fl016k@0: $nodename:0: 's25fl016k@0' does not match '^flash(@.*)?$' From schema: Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020204145.235050-1-david@ixit.cz
2021-10-24ARM: dts: qcom: correct mmc node namingDavid Heidelberg12-30/+30
MMC nodes has to be named mmc@ to comply with dt-bindings. Fix warnings as: arch/arm/boot/dts/qcom-msm8660-surf.dt.yaml: sdcc@12400000: $nodename:0: 'sdcc@12400000' does not match '^mmc(@.*)?$' From schema: Documentation/devicetree/bindings/mmc/arm,pl18x.yaml Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020201440.229196-1-david@ixit.cz
2021-10-24ARM: dts: qcom: fix memory and mdio nodes naming for RB3011David Heidelberg1-3/+3
Fixes warnings regarding to memory and mdio nodes and apply new naming following dt-schema. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020214741.261509-1-david@ixit.cz
2021-10-24dt-bindings: arm: qcom: Fix Nexus 4 vendor prefixDavid Heidelberg1-1/+1
The Nexus 4 (mako) was accidentally described as a Asus device, while it's LG. Fixes: 9304af37d07b ("dt-bindings: arm: qcom, add missing devices") Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Updated commit message, per suggestion from Konrad Dybcio] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020001327.37490-1-david@ixit.cz
2021-10-24ARM: dts: ipq4019-ap.dk01.1-c1: add device compatible in the dtsDavid Heidelberg2-2/+1
Version dk01.1-c1 didn't have compatible specified, which was causing dt-schema validation warnings. Remove duplicated and useless board compatible from dtsi between board and device. Signed-off-by: David Heidelberg <david@ixit.cz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211009193102.76852-2-david@ixit.cz
2021-10-24dt-bindings: arm: qcom-ipq4019: add missing device compatibleDavid Heidelberg1-0/+1
One board version (dk01.1-c1) didn't have set device compatible, so let's list it. Signed-off-by: David Heidelberg <david@ixit.cz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211009193102.76852-1-david@ixit.cz
2021-10-24ARM: dts: qcom: apq8026-lg-lenok: rename board vendorLuca Weiss2-2/+2
In order to avoid having prefixes for multiple internal divisions of LG use the "lg" prefix instead of "lge". Fixes: ad3f04b7bef6 ("ARM: dts: qcom: Add support for LG G Watch R") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928203815.77175-2-luca@z3ntu.xyz
2021-10-24dt-bindings: arm: qcom: rename vendor of apq8026-lenokLuca Weiss1-1/+1
In order to avoid having prefixes for multiple internal divisions of LG use the "lg" prefix instead of "lge". Fixes: 21f3cbf693b0 ("dt-bindings: arm: qcom: Document APQ8026 SoC binding") Signed-off-by: Luca Weiss <luca@z3ntu.xyz> Acked-by: David Heidelberg <david@ixit.cz> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210928203815.77175-1-luca@z3ntu.xyz
2021-10-24ARM: dts: qcom: sdx55: Drop '#clock-cells' from QMP PHY nodeShawn Guo1-1/+0
'#clock-cells' is a required property of QMP PHY child node, not itself. Drop it to fix the dtbs_check warnings below. qcom-sdx55-t55.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' qcom-sdx55-mtp.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' qcom-sdx55-telit-fn980-tlb.dt.yaml: phy@ff6000: '#clock-cells' does not match any of the regexes: '^phy@[0-9a-f]+$', 'pinctrl-[0-9]+' Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210929034253.24570-11-shawn.guo@linaro.org
2021-10-24ARM: dts: qcom: mdm9615: fix memory node for Sierra Wireless WP8548David Heidelberg1-1/+1
Specify unit address for the memory node, to match the reg. Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Rewrote commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211020234431.298310-1-david@ixit.cz
2021-10-22Merge tag 'aspeed-5.16-devicetree-2' of ↵Arnd Bergmann7-1246/+470
git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt ASPEED device tree updates for 5.16, round 2 - New machines: * Inventec Transformers, an x86 family server with an AST2600 BMC - Updates to the Everest and Rainier sensors, gpios and KCS devices - New UART routing device tree description * tag 'aspeed-5.16-devicetree-2' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc: ARM: dts: aspeed: Add uart routing to device tree ARM: dts: aspeed: rainier: Enable earlycon ARM: dts: aspeed: rainier: Add front panel LEDs ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6 ARM: dts: aspeed: rainier: Remove PSU gpio-keys ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7 ARM: dts: aspeed: rainier: Add eeprom on bus 12 ARM: dts: aspeed: p10bmc: Enable KCS channel 2 ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP binding ARM: dts: aspeed: Adding Inventec Transformers BMC ARM: dts: aspeed: everest: Fix bus 15 muxed eeproms ARM: dts: aspeed: everest: Add IBM Operation Panel I2C device ARM: dts: aspeed: everest: Add I2C switch on bus 8 ARM: dts: aspeed: rainier and everest: Remove PCA gpio specification ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node name Link: https://lore.kernel.org/r/CACPK8Xd=eAMk-S3akhGgL4i_K190Nz9t=_CrdHQMJ+nbW172mg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-22dts: socfpga: Add Mercury+ AA1 devicetreePaweł Anikiel2-0/+113
Add support for the Mercury+ AA1 module for Arria 10 SoC FPGA. Signed-off-by: Paweł Anikiel <pan@semihalf.com> Signed-off-by: Joanna Brozek <jbrozek@antmicro.com> Signed-off-by: Mariusz Glebocki <mglebocki@antmicro.com> Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com> Signed-off-by: Maciej Mikunda <mmikunda@antmicro.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211021151736.2096926-2-pan@semihalf.com' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-22ARM: dts: spear13xx: Drop malformed 'interrupt-map' on PCI nodesRob Herring2-8/+0
The spear13xx PCI 'interrupt-map' property is not parse-able. '#interrupt-cells' is missing and there are 3 #address-cells. Based on the driver, the only supported interrupt is for MSI. Therefore, 'interrupt-map' is not needed. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Link: https://lore.kernel.org/r/20211022141156.2592221-1-robh@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-21ARM: dts: at91: sama7g5-ek: use blocks 0 and 1 of TCB0 as cs and ceClaudiu Beznea1-0/+12
Use blocks 0 and 1 of TCB0 for clocksource and clockevent functionality. PIT64B is already enabled on SAMA7G5 targets for this but TCB0 will be used as a fallback only in case PIT64B will fail to probe. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211020094656.3343242-4-claudiu.beznea@microchip.com
2021-10-21ARM: dts: at91: sama7g5: add tcb nodesClaudiu Beznea1-0/+20
Add TCB nodes. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211020094656.3343242-3-claudiu.beznea@microchip.com
2021-10-21ARM: dts: at91: sama7g5: add rtc nodeEugen Hristev1-0/+7
Add RTC node. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea: add sama7g5 compatible as the IP has 2 extra registers compared with sam9x60] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20211020094656.3343242-2-claudiu.beznea@microchip.com
2021-10-21ARM: dts: aspeed: Add uart routing to device treeChia-Wei Wang3-0/+18
Add LPC uart routing to the device tree for Aspeed SoCs. Signed-off-by: Oskar Senft <osk@google.com> Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com> Tested-by: Lei YU <yulei.sh@bytedance.com> Link: https://lore.kernel.org/r/20210927023053.6728-6-chiawei_wang@aspeedtech.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Enable earlyconJoel Stanley1-1/+1
Rainier was missed when enabling all of the other machines in commit 239566b032f3 ("ARM: dts: aspeed: Set earlycon boot argument"). Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add front panel LEDsJoel Stanley1-0/+42
These were meant to be part of commit 4fb27b3f9176 ("ARM: dts: aspeed: rainier: Add system LEDs") but went missing. Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add 'factory-reset-toggle' as GPIOF6Isaac Kurth1-1/+1
The state of this GPIO determines whether a factory reset has been requested. If a physical switch is used, it can be high or low. During boot, the software checks and records the state of this switch. If it is different than the previous recorded state, then the read-write portions of memory are reformatted. Signed-off-by: Isaac Kurth <isaac.kurth@ibm.com> Reviewed-by: Adriana Kobylak <anoo@us.ibm.com> Link: https://lore.kernel.org/r/20210714214741.1547052-1-blisaac91@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove PSU gpio-keysB. J. Wyman1-28/+0
Remove the gpio-keys entries for the power supply presence lines from the Rainier device tree. The user space applications are going to change from using libevdev to libgpiod. Signed-off-by: B. J. Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20210623230401.3050076-1-bjwyman@gmail.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Remove gpio hog for GPIOP7Eddie James1-7/+0
Only the pass 1 Ingraham board (Rainier system) had a micro-controller wired to GPIOP7 on ball Y23. Pass 2 boards have this ball wired to the heartbeat LED, so remove the hog as this device tree supports pass 2. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier: Add eeprom on bus 12Eddie James1-0/+5
The devicetree was missing an eeprom. Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210915214738.34382-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Enable KCS channel 2Andrew Jeffery2-0/+10
Rainier uses KCS channel 2 as the source for the debug-trigger application outlined at [1] and implemented at [2]. [1] https://github.com/openbmc/docs/blob/master/designs/bmc-service-failure-debug-and-recovery.md [2] https://github.com/openbmc/debug-trigger Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Link: https://lore.kernel.org/r/20210623033854.587464-8-andrew@aj.id.au Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Use KCS 3 for MCTP bindingAndrew Jeffery2-5/+12
The MCTP LPC driver was loaded by hacking up the compatible in the devicetree node for KCS 4. With the introduction of the raw KCS driver this hack is no-longer required. Use the regular compatible string for KCS 4 and configure the appropriate SerIRQ. The reset state of the status bits on KCS 4 is inappropriate for the MCTP LPC binding. Switch to KCS 3 which has a different reset behaviour. Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: Adding Inventec Transformers BMCLin.TommySC 林世欽 TAO2-0/+329
Initial introduction of Inventec Transformers x86 family equipped with AST2600 BMC SoC. Signed-off-by: Tommy Lin <Lin.TommySC@inventec.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/7d7b20575f994a3c9018223a3c5f198d@inventec.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Fix bus 15 muxed eepromsEddie James1-20/+20
The eeproms on bus 15 muxes were at the wrong addresses. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-6-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add IBM Operation Panel I2C deviceEddie James1-1/+7
Set I2C bus 14 to multi-master mode and add the panel device that will register the I2C controller as a slave device. In addition, in early Everest systems, the panel device was behind an I2C switch, which doesn't work for slave mode. Get it working (albeit unreliably, since a master transaction might switch the switch at any moment) by defaulting the switch channel to the one with the panel. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-5-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: everest: Add I2C switch on bus 8Eddie James1-0/+23
The switch controls two busses containing some VRMs. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-4-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: rainier and everest: Remove PCA gpio specificationEddie James2-1181/+0
Specifying gpio nodes under PCA led controllers no longer does anything, so remove those nodes in the device trees. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-3-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21ARM: dts: aspeed: p10bmc: Fix ADC iio-hwmon battery node nameEddie James2-2/+2
In keeping with previous systems, call the iio-hwmon bridge node "iio-hwmon-battery" to distinguish it as the battery voltage sensor. Signed-off-by: Eddie James <eajames@linux.ibm.com> Reviewed-by: Joel Stanley <joel@jms.id.au> Link: https://lore.kernel.org/r/20211020215321.33960-2-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-10-21Merge tag 'omap-for-v5.16/gpmc-signed' of ↵Arnd Bergmann16-559/+631
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt Changes for omap gpmc bindings and devicetree files for v5.16 A series of changes to update the gpmc related bindings to yaml format, and a few non-urgent dts fixes. * tag 'omap-for-v5.16/gpmc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap: fix gpmc,mux-add-data type ARM: dts: omap: Fix boolean properties gpmc,cycle2cycle-{same|diff}csen dt-bindings: memory-controllers: ti,gpmc: Convert to yaml dt-bindings: mtd: ti,gpmc-onenand: Convert to yaml dt-bindings: mtd: ti,gpmc-nand: Convert to yaml dt-bindings: memory-controllers: Introduce ti,gpmc-child dt-bindings: net: Remove gpmc-eth.txt dt-bindings: mtd: Remove gpmc-nor.txt Link: https://lore.kernel.org/r/pull-1634280279-284035@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-21Merge branch 'mstar-dt-next' of https://github.com/linux-chenxing/linux into ↵Arnd Bergmann1-0/+9
arm/dt * 'mstar-dt-next' of https://github.com/linux-chenxing/linux: ARM: dts: mstar: Mark timer with arm,cpu-registers-not-fw-configured ARM: dts: mstar: Add rtc device node Link: https://lore.kernel.org/r/20211020163010.3079-1-romain.perier@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20ARM: dts: mstar: Mark timer with arm,cpu-registers-not-fw-configuredRomain Perier1-0/+1
The vendor u-boot does not configure the arch timer correctly on MStar, let Linux do it. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/linux-arm-kernel/20210923170747.5786-2-romain.perier@gmail.com
2021-10-20ARM: dts: mstar: Add rtc device nodeRomain Perier1-0/+8
This adds the definition of the rtc device node. The RTC being able to work with the oscillator at 12Mhz for now, it shares the same xtal than the watchdog. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Daniel Palmer <daniel@0x0f.com> Link: https://lore.kernel.org/all/20210823171613.18941-4-romain.perier@gmail.com
2021-10-20Merge tag 'arm-soc/for-5.15/devicetree' of ↵Arnd Bergmann4-15/+24
https://github.com/Broadcom/stblinux into arm/dt This is already in v5.15-rc5, but I'm adding it here as well to get a clean build of the dts files. * tag 'arm-soc/for-5.15/devicetree': ARM: dts: bcm2711-rpi-4-b: Fix usb's unit address ARM: dts: bcm2711-rpi-4-b: Fix pcie0's unit address formatting ARM: dts: bcm2711-rpi-4-b: fix sd_io_1v8_reg regulator states ARM: dts: bcm2711: fix MDIO #address- and #size-cells ARM: dts: bcm283x: Fix VEC address for BCM2711
2021-10-20Merge tag 'v5.16-rockchip-dts32-2' of ↵Arnd Bergmann6-34/+32
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Adapt gpio subnode names to match the yaml binding and removal of the actually non-matching fallback-string for usb-phys on rk3066/rk3188 (most-specific compatible is and must always be used). * tag 'v5.16-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: remove usb-phy fallback string from rk3066a/rk3188 ARM: dts: rockchip: change gpio nodenames Link: https://lore.kernel.org/r/3630369.N7QejLDta5@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'v5.16-rockchip-dts64-2' of ↵Arnd Bergmann12-27/+489
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt Idle-cooling information for rk3399, rk356x additions (tsadc resets, i2s, spdif, pwm), rk3368 powerdomains, fixes to make gpio subnodes compliant with the new pinctrl yaml binding and addition of the chassis-type for the non-sbc devices. * tag 'v5.16-rockchip-dts64-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: arm64: dts: rockchip: Add idle cooling devices to rk3399 arm64: dts: rockchip: fix resets in tsadc node for rk356x arm64: dts: rockchip: Add analog audio on Quartz64 arm64: dts: rockchip: Add i2s1 on rk356x arm64: dts: rockchip: change gpio nodenames arm64: dts: rockchip: add 'chassis-type' property arm64: dts: rockchip: add powerdomains to rk3368 dt-bindings: arm: rockchip: add rk3368 compatible string to pmu.yaml arm64: dts: rockchip: enable spdif on Quartz64 A arm64: dts: rockchip: add spdif node to rk356x arm64: dts: rockchip: add pwm nodes for rk3568 Link: https://lore.kernel.org/r/4536780.s7XYDJ6uuW@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'gemini-dts-for-v5.16' of ↵Arnd Bergmann10-97/+318
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt Gemini changes for the v5.16 kernel cycle: - Add device trees for Edimax NS2502 and SSI 1328 - Consolidate PCI interrupts * tag 'gemini-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: gemini: Consolidate PCI interrupt-map properties ARM: gemini: add device tree for ssi1328 ARM: gemini: add device tree for edimax NS2502 dt-bindings: add vendor prefix for ssi dt-bindings: add vendor prefix for edimax ARM: dts: gemini: add labels for USB, IDE, flash and ethernet Link: https://lore.kernel.org/r/CACRpkdac5Sbt42CtuLMgCazfHdhcP98mEKGjeZ-DVcb=_N90Bg@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'ixp4xx-dts-for-v5.16' of ↵Arnd Bergmann14-2/+32
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt IXP4xx DTS changes for the v5.16 kernel: - Add the PTP timesource - Push down PCI interrupt properties to the individual board files. * tag 'ixp4xx-dts-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: dts: ixp4xx: Group PCI interrupt properties together ARM: dts: Add PTP timesource to the IXP456x Link: https://lore.kernel.org/r/CACRpkdbSJ662h_B9mAGdXWBeq8ZwKTQvSJ7cZ2x2d8UgELP5QA@mail.gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-20Merge tag 'sunxi-dt-for-5.16-1' of ↵Arnd Bergmann33-112/+267
git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt Our usual round of DT patches for the 5.16 merge window, with: - DT schema fixes - I2S support for the R40 - HDMI support for the pinetab - devfreq support for the A64 GPU * tag 'sunxi-dt-for-5.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits) dt-bindings: interconnect: sunxi: Add R40 MBUS compatible arm64: dts: allwinner: NanoPi R1S H5: Add generic compatible string for I2C EEPROM arm64: dts: allwinner: pinetab: Add HDMI support arm64: dts: allwinner: a64: Add GPU opp table ARM: dts: sun8i: r40: Add I2S nodes dt-bindings: sound: sun4i-i2s: add Allwinner R40 I2S compatible arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC arm64: dts: allwinner: teres-i: Add missing reg arm64: dts: allwinner: pinetab: Change regulator node name to avoid warning arm64: dts: allwinner: a100: Fix thermal zone node name arm64: dts: allwinner: h6: Fix de3 parent clocks ordering arm64: dts: allwinner: h5: Fix GPU thermal zone node name ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible ARM: dts: tbs711: Fix touchscreen compatible ARM: dts: sunxi: Fix the SPI NOR node names ARM: dts: sunxi: Fix OPPs node name ARM: dts: sunxi: Fix OPP arrays ARM: dts: sunxi: Rename gpio pinctrl names ARM: dts: sunxi: Rename power-supply names dt-bindings: sunxi: Add Allwinner A80 PRCM Binding ... Link: https://lore.kernel.org/r/5cad5ac6-187d-4d36-9437-5821c6e8242d.lettre@localhost Signed-off-by: Arnd Bergmann <arnd@arndb.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 21:16:00 +0300