| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to protect the reader reading the sysctl value because the
value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to protect the reader reading the sysctl value
because the value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
We need to protect the reader reading sysctl_netrom_default_path_quality
because the value can be changed concurrently.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-03-06
1) Clear the ECN bits flowi4_tos in decode_session4().
This was already fixed but the bug was reintroduced
when decode_session4() switched to us the flow dissector.
From Guillaume Nault.
2) Fix UDP encapsulation in the TX path with packet offload mode.
From Leon Romanovsky,
3) Avoid clang fortify warning in copy_to_user_tmpl().
From Nathan Chancellor.
4) Fix inter address family tunnel in packet offload mode.
From Mike Yu.
* tag 'ipsec-2024-03-06' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: set skb control buffer based on packet offload as well
xfrm: fix xfrm child route lookup for packet offload
xfrm: Avoid clang fortify warning in copy_to_user_tmpl()
xfrm: Pass UDP encapsulation in TX packet offload
xfrm: Clear low order bits of ->flowi4_tos in decode_session4().
====================
Link: https://lore.kernel.org/r/20240306100438.3953516-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
After 292fac464b01 ("net: ethtool: eee: Remove legacy _u32 from keee")
this function has no user any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/b4ff9b51-092b-4d44-bfce-c95342a05b51@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch updates the mlxbf_gige driver to support the
"get_pause_stats()" callback, which enables display of
pause frame counters via "ethtool -I -a oob_net0".
The pause frame counters are only enabled if the "counters_en"
bit is asserted in the LLU general config register. The driver
will only report stats, and thus overwrite the default stats
state of ETHTOOL_STAT_NOT_SET, if "counters_en" is asserted.
Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20240305212137.3525-1-davthompson@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Kernel bot has discovered that if CONFIG_GPIOLIB is not set compilation
will fail.
Upon investigation the issue is that qca807x_gpio() is guarded by a
preprocessor check but then it is called under
if (IS_ENABLED(CONFIG_GPIOLIB)) in the probe call so the compiler will
error out since qca807x_gpio() has not been declared if CONFIG_GPIOLIB has
not been set.
Fixes: d1cb613efbd3 ("net: phy: qcom: add support for QCA807x PHY Family")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403031332.IGAbZzwq-lkp@intel.com/
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Simon Horman <horms@kernel.org> # build-tested
Link: https://lore.kernel.org/r/20240305142113.795005-1-robimarko@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305172911.502058-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the geneve driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240305172911.502058-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Assign netdev to gtp->dev at setup time, so, we can get rid of
gtp_dev_init() completely.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3e2f544dd8a33 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-2-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the gtp driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Pablo Neira Ayuso <pablo@netfilter.org>
Link: https://lore.kernel.org/r/20240305121524.2254533-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With commit 34d21de99cea9 ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core
instead of in this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Remove the allocation in the macsec driver and leverage the network
core allocation instead.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240305113728.1974944-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Document support for the Renesas Ethernet AVB (EtherAVB-IF) block in the
Renesas R-Car V4M (R8A779H0) SoC.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/0212b57ba1005bb9b5a922f8f25cc67a7bc15f30.1709631152.git.geert+renesas@glider.be
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 19a38d8e0aa3 ("USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support")
Link: https://lore.kernel.org/r/20240305075927.261284-1-nichen@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Always run fixture setup in the grandchild process, and by default also
run the teardown in the same process. However, this change makes it
possible to run the teardown in a parent process when
_metadata->teardown_parent is set to true (e.g. in fixture setup).
Fix TEST_SIGNAL() by forwarding grandchild's signal to its parent. Fix
seccomp tests by running the test setup in the parent of the test
thread, as expected by the related test code. Fix Landlock tests by
waiting for the grandchild before processing _metadata.
Use of exit(3) in tests should be OK because the environment in which
the vfork(2) call happen is already dedicated to the running test (with
flushed stdio, setpgrp() call), see __run_test() and the call to fork(2)
just before running the setup/test/teardown. Even if the test
configures its own exit handlers, they will not be run by the parent
because it never calls exit(3), and the test function either ends with a
call to _exit(2) or a signal.
Cc: Günther Noack <gnoack@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Fixes: 0710a1a73fb4 ("selftests/harness: Merge TEST_F_FORK() into TEST_F()")
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Reported-by: Mark Brown <broonie@kernel.org>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20240305201029.1331333-1-mic@digikod.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: some clean-up patches
Here are some clean-up patches for MPTCP:
- Patch 1 drops duplicated header inclusions.
- Patch 2 updates PM 'set_flags' interface, to make it more similar to
others.
- Patch 3 adds some error messages for the PM 'set_flags' command to
help the userspace understanding what's wrong in case of error.
- Patch 4 simplifies __lookup_addr() function from pm_netlink.c.
Except for the 3rd patch, the behaviour is not supposed to be modified.
====================
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-0-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When the lookup_by_id parameter of __lookup_addr() is true, it's the same
as __lookup_addr_by_id(), it can be replaced by __lookup_addr_by_id()
directly. So drop this parameter, let __lookup_addr() only looks up address
on the local address list by comparing addresses in it, not address ids.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-4-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In addition to returning the error value, this patch also sets an error
messages with GENL_SET_ERR_MSG or NL_SET_ERR_MSG_ATTR both for pm_netlink.c
and pm_userspace.c. It will help the userspace to identify the issue.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-3-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch updates set_flags interfaces, make it more similar to the
interfaces of dump_addr and get_addr:
mptcp_pm_set_flags(struct sk_buff *skb, struct genl_info *info)
mptcp_pm_nl_set_flags(struct sk_buff *skb, struct genl_info *info)
mptcp_userspace_pm_set_flags(struct sk_buff *skb, struct genl_info *info)
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-2-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The headers net/tcp.h, net/genetlink.h and uapi/linux/mptcp.h are included
in protocol.h already, no need to include them again directly. This patch
removes these duplicate header inclusions.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240305-upstream-net-next-20240304-mptcp-misc-cleanup-v1-1-c436ba5e569b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:
====================
pull-request: bpf 2024-03-06
We've added 5 non-merge commits during the last 1 day(s) which contain
a total of 5 files changed, 77 insertions(+), 4 deletions(-).
The main changes are:
1) Fix BPF verifier to check bpf_func_state->callback_depth when pruning
states as otherwise unsafe programs could get accepted,
from Eduard Zingerman.
2) Fix to zero-initialise xdp_rxq_info struct before running XDP program in
CPU map which led to random xdp_md fields, from Toke Høiland-Jørgensen.
3) Fix bonding XDP feature flags calculation when bonding device has no
slave devices anymore, from Daniel Borkmann.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
cpumap: Zero-initialise xdp_rxq_info struct before running XDP program
selftests/bpf: Fix up xdp bonding test wrt feature flags
xdp, bonding: Fix feature flags when there are no slave devs anymore
selftests/bpf: test case for callback_depth states pruning logic
bpf: check bpf_func_state->callback_depth when pruning states
====================
Link: https://lore.kernel.org/r/20240306220309.13534-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts
that are out of bounds for their data type.
vmlinux get_bitmap(b=75) + 712
<net/netfilter/nf_conntrack_h323_asn1.c:0>
vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956
<net/netfilter/nf_conntrack_h323_asn1.c:592>
vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812
<net/netfilter/nf_conntrack_h323_asn1.c:576>
vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux DecodeRasMessage() + 304
<net/netfilter/nf_conntrack_h323_asn1.c:833>
vmlinux ras_help() + 684
<net/netfilter/nf_conntrack_h323_main.c:1728>
vmlinux nf_confirm() + 188
<net/netfilter/nf_conntrack_proto.c:137>
Due to abnormal data in skb->data, the extension bitmap length
exceeds 32 when decoding ras message then uses the length to make
a shift operation. It will change into negative after several loop.
UBSAN load could detect a negative shift as an undefined behaviour
and reports exception.
So we add the protection to avoid the length exceeding 32. Or else
it will return out of range error and stop decoding.
Fixes: 5e35941d9901 ("[NETFILTER]: Add H.323 conntrack/NAT helper")
Signed-off-by: Lena Wang <lena.wang@mediatek.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
While the rhashtable set gc runs asynchronously, a race allows it to
collect elements from anonymous sets with timeouts while it is being
released from the commit path.
Mingi Cho originally reported this issue in a different path in 6.1.x
with a pipapo set with low timeouts which is not possible upstream since
7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set
element timeout").
Fix this by setting on the dead flag for anonymous sets to skip async gc
in this case.
According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on
transaction abort"), Florian plans to accelerate abort path by releasing
objects via workqueue, therefore, this sets on the dead flag for abort
path too.
Cc: stable@vger.kernel.org
Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane")
Reported-by: Mingi Cho <mgcho.minic@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Following is rejected but should be allowed:
table inet t {
ct expectation exp1 {
[..]
l3proto ip
Valid combos are:
table ip t, l3proto ip
table ip6 t, l3proto ip6
table inet t, l3proto ip OR l3proto ip6
Disallow inet pseudeo family, the l3num must be a on-wire protocol known
to conntrack.
Retain NFPROTO_INET case to make it clear its rejected
intentionally rather as oversight.
Fixes: 8059918a1377 ("netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This set combination is weird: it allows for elements to be
added/deleted, but once bound to the rule it cannot be updated anymore.
Eventually, all elements expire, leading to an empty set which cannot
be updated anymore. Reject this flags combination.
Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Anonymous sets are never used with timeout from userspace, reject this.
Exception to this rule is NFT_SET_EVAL to ensure legacy meters still work.
Cc: stable@vger.kernel.org
Fixes: 761da2935d6e ("netfilter: nf_tables: add set timeout API support")
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Introduce ixgbe_update_{r,t}x_ring_stats() that will be used by both
standard and ZC datapath.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The "qv_info" ptr cannot be NULL when it gets the address of
an element of the flexible array "qvlist_info->qv_info".
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
There are currently two pairs of identical checks and calls
to iavf_{add|del}_cloud_filter().
Detected using the static analysis tool - Svace.
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
- Get rid of copy_mc flag in iov_iter which really only makes sense for
the core dumping code so move it out of the generic iov iter code and
make it coredump's problem. See the detailed commit description.
- Revert fs/aio: Make io_cancel() generate completions again
The initial fix here was predicated on the assumption that calling
ki_cancel() didn't complete aio requests. However, that turned out to
be wrong since the two drivers that actually make use of this set a
cancellation function that performs the cancellation correctly. So
revert this change.
- Ensure that the test for IOCB_AIO_RW always happens before the read
from ki_ctx.
* tag 'vfs-6.8-release.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: get rid of 'copy_mc' flag
fs/aio: Check IOCB_AIO_RW before the struct aio_kiocb conversion
Revert "fs/aio: Make io_cancel() generate completions again"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These should be the final fixes for the soc tree for 6.8, as usual
they mostly deal wtih dts files:
- Qualcomm fixes for pcie4 on sc8280xp, a revert of msm8996 mpm
support, sm6115 interconnect and sm8650 gpio.
- Two fixes for Tegra234 ethernet
- A Makefile fix to actually build the allwinner based orange pi zero
2w device tree
- Fixes for clocks and reset on imx8mp and a DSI display regression
on imx7.
The non-DT fixes are:
- Firmware fixes addressing a kernel panic in op-tee and a minor
regression in microchip/riscv.
- A defconfig change to bring back backlight support after a Kconfig
change"
* tag 'arm-fixes-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firmware: microchip: Fix over-requested allocation size
tee: optee: Fix kernel panic caused by incorrect error handling
Revert "arm64: dts: qcom: msm8996: Hook up MPM"
arm64: dts: qcom: sc8280xp-x13s: limit pcie4 link speed
arm64: dts: qcom: sc8280xp-crd: limit pcie4 link speed
arm64: dts: imx8mp: Fix LDB clocks property
arm64: dts: imx8mp: Fix TC9595 reset GPIO on DH i.MX8M Plus DHCOM SoM
MAINTAINERS: Use a proper mailinglist for NXP i.MX development
ARM: dts: imx7: remove DSI port endpoints
arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile
ARM: imx_v6_v7_defconfig: Restore CONFIG_BACKLIGHT_CLASS_DEVICE
arm64: tegra: Fix Tegra234 MGBE power-domains
arm64: tegra: Set the correct PHY mode for MGBE
arm64: dts: qcom: sm6115: Fix missing interconnect-names
arm64: dts: qcom: sm8650-mtp: add gpio74 as reserved gpio
arm64: dts: qcom: sm8650-qrd: add gpio74 as reserved gpio
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix potential use-after-frees in rk3288 and sun8i-ce"
* tag 'v6.8-p6' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: rk3288 - Fix use after free in unprepare
crypto: sun8i-ce - Fix use after free in unprepare
|
|
Currently getsockopt does not support IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT, and we are unable to get the values of these two
socket options through getsockopt.
This patch adds getsockopt support for IP_ROUTER_ALERT and
IPV6_ROUTER_ALERT.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tools: ynl: add --dbg-small-recv for easier kernel testing
When testing netlink dumps I usually hack some user space up
to constrain its user space buffer size (iproute2, ethtool or ynl).
Netlink will try to fill the messages up, so since these apps use
large buffers by default, the dumps are rarely fragmented.
I was hoping to figure out a way to create a selftest for dump
testing, but so far I have no idea how to do that in a useful
and generic way.
Until someone does that, make manual dump testing easier with YNL.
Create a special option for limiting the buffer size, so I don't
have to make the same edits each time, and maybe others will benefit,
too :)
Example:
$ ./cli.py [...] --dbg-small-recv >/dev/null
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
Now let's make the DONE not fit in the last message:
$ ./cli.py [...] --dbg-small-recv 4499 >/dev/null
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 4480 bytes, 35 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 20 bytes, 1 messages
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
A real test would also have to check the messages are complete
and not duplicated. That part has to be done manually right now.
Note that the first message is always conservatively sized by the kernel.
Still, I think this is good enough to be useful.
v2:
- patch 2:
- move the recv_size setting up
- change the default to 0 so that cli.py doesn't have to worry
what the "unset" value is
v1: https://lore.kernel.org/all/20240301230542.116823-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most "production" netlink clients use large buffers to
make dump efficient, which means that handling of dump
continuation in the kernel is not very well tested.
Add an option for debugging / testing handling of dumps.
It enables printing of extra netlink-level debug and
lowers the recv() buffer size in one go. When used
without any argument (--dbg-small-recv) it picks
a very small default (4000), explicit size can be set,
too (--dbg-small-recv 5000).
Example:
$ ./cli.py [...] --dbg-small-recv
Recv: read 3712 bytes, 29 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 3968 bytes, 31 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
Recv: read 532 bytes, 5 messages
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
[...]
nl_len = 128 (112) nl_flags = 0x0 nl_type = 19
nl_len = 20 (4) nl_flags = 0x2 nl_type = 3
(the [...] are edits to shorten the commit message).
Note that the first message of the dump is sized conservatively
by the kernel.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For manual debug, allow printing the netlink level messages
to stderr.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the size of the buffer we use for recv() configurable.
The details of the buffer sizing in netlink are somewhat
arcane, we could spend a lot of time polishing this API.
Let's just leave some hopefully helpful comments for now.
This is a for-developers-only feature, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We add the new line even if message has no error or extack,
which leads to print(nl_msg) ending with two new lines.
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Jakub Kicinski says:
====================
tools: ynl: clean up make clean
First change renames the clean target which removes build results,
to a more common name. Second one add missing .PHONY targets.
Third one ensures that clean deletes __pycache__.
v2: add patch 2
v1: https://lore.kernel.org/all/20240301235609.147572-1-kuba@kernel.org/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Build process uses python to generate the user space code.
Remove __pycache__ on make clean.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Donald points out most YNL makefiles are missing distclean
in .PHONY, even tho generated/Makefile does list it.
Suggested-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The make target to remove all generated files used to be called
"hardclean" because it deleted files which were tracked by git.
We no longer track generated user space files, so use the more
common "distclean" name.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If connection isn't established yet, get_mr() will fail, trigger connection after
get_mr().
Fixes: 584a8279a44a ("RDS: RDMA: return appropriate error on rdma map failures")
Reported-and-tested-by: syzbot+d4faee732755bba9838e@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-03-04 (ice)
This series contains updates to ice driver only.
Jake changes the driver to use relative VSI index for VF VSIs as the VF
driver has no direct use of the VSI number on ice hardware. He also
reworks some Tx/Rx functions to clarify their uses, cleans up some style
issues, and utilizes kernel helper functions.
Maciej removes a redundant call to disable Tx queues on ifdown and
removes some unnecessary devm usages.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Niklas Söderlund says:
====================
ravb: Align Rx descriptor setup and maintenance
When RZ/G2L support was added the Rx code path was split in two, one to
support R-Car and one to support RZ/G2L. One reason for this is that
R-Car uses the extended Rx descriptor format, while RZ/G2L uses the
normal descriptor format.
In many aspects this is not needed as the extended descriptor format is
just a normal descriptor with extra metadata (timestamsp) appended. And
the R-Car SoCs can also use normal descriptors if hardware timestamps
were not desired. This split has led to RZ/G2L gaining support for
split descriptors in the Rx path while R-Car still lacks this.
This series is the first step in trying to merge the R-Car and RZ/G2L Rx
paths so features and bugs corrected in one will benefit the other.
The first patch in the series clarifies that the driver now supports
either normal or extended descriptors, not both at the same time by
grouping them in a union. This is the foundation that later patches will
build on the aligning the two Rx paths.
Patches 2-5 deals with correcting small issues in the Rx frame and
descriptor sizes that either were incorrect at the time they were added
in 2017 (my bad) or concepts built on-top of this initial incorrect
design.
While finally patch 6 merges the R-Car and RZ/G2L for Rx descriptor
setup and maintenance.
When this work has landed I plan to follow up with more work aligning
the rest of the Rx code paths and hopefully bring split descriptor
support to the R-Car SoCs.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The R-Car and RZ/G2L Rx code paths were split in two separate
implementations when support for RZ/G2L was added due to the fact that
R-Car uses the extended descriptor format while RZ/G2L uses normal
descriptors. This has led to a duplication of Rx logic with the only
difference being the different Rx descriptors types used. The
implementation however neglects to take into account that extended
descriptors are normal descriptors with additional metadata at the end
to carry hardware timestamp information.
The hardware timestamp information is only consumed in the R-Car Rx
loop and all the maintenance code around the Rx ring can be shared
between the two implementations if the difference in descriptor length
is carefully considered.
This change merges the two implementations for Rx ring maintenance by
adding a method to access both types of descriptors as normal
descriptors, as this part covers all the fields needed for Rx ring
maintenance the only difference between using normal or extended
descriptor is the size of the memory region to allocate/free and the
step size between each descriptor in the ring.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
