summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-12-21Merge branches 'fixes' and 'misc' into for-nextRussell King46-189/+833
2020-12-21ARM: 9027/1: head.S: explicitly map DT even if it lives in the first ↵Ard Biesheuvel1-2/+2
physical section The early ATAGS/DT mapping code uses SECTION_SHIFT to mask low order bits of R2, and decides that no ATAGS/DTB were provided if the resulting value is 0x0. This means that on systems where DRAM starts at 0x0 (such as Raspberry Pi), no explicit mapping of the DT will be created if R2 points into the first 1 MB section of memory. This was not a problem before, because the decompressed kernel is loaded at the base of DRAM and mapped using sections as well, and so as long as the DT is referenced via a virtual address that uses the same translation (the linear map, in this case), things work fine. However, commit 7a1be318f579 ("9012/1: move device tree mapping out of linear region") changes this, and now the DT is referenced via a virtual address that is disjoint from the linear mapping of DRAM, and so we need the early code to create the DT mapping unconditionally. So let's create the early DT mapping for any value of R2 != 0x0. Reported-by: "kernelci.org bot" <bot@kernelci.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9038/1: Link with '-z norelro'Nathan Chancellor1-1/+1
When linking a multi_v7_defconfig + CONFIG_KASAN=y kernel with LD=ld.lld, the following error occurs: $ make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 zImage ld.lld: error: section: .exit.data is not contiguous with other relro sections LLD defaults to '-z relro', which is unneeded for the kernel because program headers are not used nor is there any position independent code generation or linking for ARM. Add '-z norelro' to LDFLAGS_vmlinux to avoid this error. Link: https://github.com/ClangBuiltLinux/linux/issues/1189 Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9037/1: uncompress: Add OF_DT_MAGIC macroGeert Uytterhoeven1-5/+7
The DTB magic marker is stored as a 32-bit big-endian value, and thus depends on the CPU's endianness. Add a macro to define this value in native endianness, to reduce #ifdef clutter and (future) duplication. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9036/1: uncompress: Fix dbgadtb size parameter nameGeert Uytterhoeven1-2/+2
The dbgadtb macro is passed the size of the appended DTB, not the end address. Fixes: c03e41470e901123 ("ARM: 9010/1: uncompress: Print the location of appended DTB") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9035/1: uncompress: Add be32tocpu macroGeert Uytterhoeven1-14/+12
DTB stores all values as 32-bit big-endian integers. Add a macro to convert such values to native CPU endianness, to reduce duplication. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9033/1: arm/smp: Drop the macro S(x,s)Anshuman Khandual1-8/+7
Mapping between IPI type index and its string is direct without requiring an additional offset. Hence the existing macro S(x, s) is now redundant and can just be dropped. This also makes the code clean and simple. Cc: Marc Zyngier <maz@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9032/1: arm/mm: Convert PUD level pgtable helper macros into functionsAnshuman Khandual1-5/+22
Macros used as functions can be problematic from the compiler perspective. There was a build failure report caused primarily because of non reference of an argument variable. Hence convert PUD level pgtable helper macros into functions in order to avoid such problems in the future. In the process, it fixes the argument variables sequence in set_pud() which probably remained hidden for being a macro. https://lore.kernel.org/linux-mm/202011020749.5XQ3Hfzc-lkp@intel.com/ https://lore.kernel.org/linux-mm/5fa49698.Vu2O3r+dU20UoEJ+%25lkp@intel.com/ Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9031/1: hyp-stub: remove unused .L__boot_cpu_mode_offset symbolArd Biesheuvel1-6/+0
Commit aaac3733171fca94 ("ARM: kvm: replace open coded VA->PA calculations with adr_l call") removed all uses of .L__boot_cpu_mode_offset, so there is no longer a need to define it. Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-21ARM: 9044/1: vfp: use undef hook for VFP support detectionArd Biesheuvel2-22/+20
Commit f77ac2e378be9dd6 ("ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel mode") failed to take into account that there is in fact a case where we relied on this code path: during boot, the VFP detection code issues a read of FPSID, which will trigger an undef exception on cores that lack VFP support. So let's reinstate this logic using an undef hook which is registered only for the duration of the initcall to vpf_init(), and which sets VFP_arch to a non-zero value - as before - if no VFP support is present. Fixes: f77ac2e378be9dd6 ("ARM: 9030/1: entry: omit FP emulation for UND ...") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9034/1: __div64_32(): straighten up inline asm constraintsNicolas Pitre1-15/+6
The ARM version of __div64_32() encapsulates a call to __do_div64 with non-standard argument passing. In particular, __n is a 64-bit input argument assigned to r0-r1 and __rem is an output argument sharing half of that r0-r1 register pair. With __n being an input argument, the compiler is in its right to presume that r0-r1 would still hold the value of __n past the inline assembly statement. Normally, the compiler would have assigned non overlapping registers to __n and __rem if the value for __n is needed again. However, here we enforce our own register assignment and gcc fails to notice the conflict. In practice this doesn't cause any problem as __n is considered dead after the asm statement and *n is overwritten. However this is not always guaranteed and clang rightfully complains. Let's fix it properly by making __n into an input-output variable. This makes it clear that those registers representing __n have been modified. Then we can extract __rem as the high part of __n with plain C code. This asm constraint "abuse" was likely relied upon back when gcc didn't handle 64-bit values optimally. Turns out that gcc is now able to optimize things and produces the same code with this patch applied. Reported-by: Antony Yu <swpenim@gmail.com> Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9030/1: entry: omit FP emulation for UND exceptions taken in kernel modeArd Biesheuvel3-30/+49
There are a couple of problems with the exception entry code that deals with FP exceptions (which are reported as UND exceptions) when building the kernel in Thumb2 mode: - the conditional branch to vfp_kmode_exception in vfp_support_entry() may be out of range for its target, depending on how the linker decides to arrange the sections; - when the UND exception is taken in kernel mode, the emulation handling logic is entered via the 'call_fpe' label, which means we end up using the wrong value/mask pairs to match and detect the NEON opcodes. Since UND exceptions in kernel mode are unlikely to occur on a hot path (as opposed to the user mode version which is invoked for VFP support code and lazy restore), we can use the existing undef hook machinery for any kernel mode instruction emulation that is needed, including calling the existing vfp_kmode_exception() routine for unexpected cases. So drop the call to call_fpe, and instead, install an undef hook that will get called for NEON and VFP instructions that trigger an UND exception in kernel mode. While at it, make sure that the PC correction is accurate for the execution mode where the exception was taken, by checking the PSR Thumb bit. Cc: Dmitry Osipenko <digetx@gmail.com> Cc: Kees Cook <keescook@chromium.org> Fixes: eff8728fe698 ("vmlinux.lds.h: Add PGO and AutoFDO input sections") Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9029/1: Make iwmmxt.S support Clang's integrated assemblerJian Cai2-44/+92
This patch replaces 6 IWMMXT instructions Clang's integrated assembler does not support in iwmmxt.S using macros, while making sure GNU assembler still emit the same instructions. This should be easier than providing full IWMMXT support in Clang. This is one of the last bits of kernel code that could be compiled but not assembled with clang. Once all of it works with IAS, we no longer need to special-case 32-bit Arm in Kbuild, or turn off CONFIG_IWMMXT when build-testing. "Intel Wireless MMX Technology - Developer Guide - August, 2002" should be referenced for the encoding schemes of these extensions. Link: https://github.com/ClangBuiltLinux/linux/issues/975 Suggested-by: Nick Desaulniers <ndesaulniers@google.com> Suggested-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Ard Biesheuvel <ardb@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Jian Cai <jiancai@google.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9028/1: disable KASAN in call stack capturing routinesArd Biesheuvel1-0/+3
KASAN uses the routines in stacktrace.c to capture the call stack each time memory gets allocated or freed. Some of these routines are also used to log CPU and memory context when exceptions are taken, and so in some cases, memory accesses may be made that are not strictly in line with the KASAN constraints, and may therefore trigger false KASAN positives. So follow the example set by other architectures, and simply disable KASAN instrumentation for these routines. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9026/1: unwind: remove old check for GCC <= 4.2Nick Desaulniers1-3/+0
Since commit 0bddd227f3dc ("Documentation: update for gcc 4.9 requirement") the minimum supported version of GCC is gcc-4.9. It's now safe to remove this code. Link: https://github.com/ClangBuiltLinux/linux/issues/427 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-12-08ARM: 9025/1: Kconfig: CPU_BIG_ENDIAN depends on !LD_IS_LLDNick Desaulniers1-0/+1
LLD does not yet support any big endian architectures. Make this config non-selectable when using LLD until LLD is fixed. Link: https://github.com/ClangBuiltLinux/linux/issues/965 Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-11-12ARM: 9024/1: Drop useless cast of "u64" to "long long"Geert Uytterhoeven1-1/+1
As "u64" is equivalent to "unsigned long long", there is no need to cast a "u64" parameter for printing it using the "0x%08llx" format specifier. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-11-12ARM: 9023/1: Spelling s/mmeory/memory/Geert Uytterhoeven1-1/+1
Fix a misspelling of the word "memory". Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-11-12ARM: 9022/1: Change arch/arm/lib/mem*.S to use WEAK instead of .weakFangrui Song3-6/+3
Commit d6d51a96c7d6 ("ARM: 9014/2: Replace string mem* functions for KASan") add .weak directives to memcpy/memmove/memset to avoid collision with KASAN interceptors. This does not work with LLVM's integrated assembler (the assembly snippet `.weak memcpy ... .globl memcpy` produces a STB_GLOBAL memcpy while GNU as produces a STB_WEAK memcpy). LLVM 12 (since https://reviews.llvm.org/D90108) will error on such an overridden symbol binding. Use the appropriate WEAK macro instead. Link: https://github.com/ClangBuiltLinux/linux/issues/1190 -- Fixes: d6d51a96c7d6 ("ARM: 9014/2: Replace string mem* functions for KASan") Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Fangrui Song <maskray@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-28ARM: 9020/1: mm: use correct section size macro to describe the FDT virtual ↵Ard Biesheuvel2-4/+4
address Commit 149a3ffe62b9dbc3 ("9012/1: move device tree mapping out of linear region") created a permanent, read-only section mapping of the device tree blob provided by the firmware, and added a set of macros to get the base and size of the virtually mapped FDT based on the physical address. However, while the mapping code uses the SECTION_SIZE macro correctly, the macros use PMD_SIZE instead, which means something entirely different on ARM when using short descriptors, and is therefore not the right quantity to use here. So replace PMD_SIZE with SECTION_SIZE. While at it, change the names of the macro and its parameter to clarify that it returns the virtual address of the start of the FDT, based on the physical address in memory. Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9019/1: kprobes: Avoid fortify_panic() when copying optprobe templateAndrew Jeffery2-20/+20
Setting both CONFIG_KPROBES=y and CONFIG_FORTIFY_SOURCE=y on ARM leads to a panic in memcpy() when injecting a kprobe despite the fixes found in commit e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") and commit 0ac569bf6a79 ("ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction"). arch/arm/include/asm/kprobes.h effectively declares the target type of the optprobe_template_entry assembly label as a u32 which leads memcpy()'s __builtin_object_size() call to determine that the pointed-to object is of size four. However, the symbol is used as a handle for the optimised probe assembly template that is at least 96 bytes in size. The symbol's use despite its type blows up the memcpy() in ARM's arch_prepare_optimized_kprobe() with a false-positive fortify_panic() when it should instead copy the optimised probe template into place: ``` $ sudo perf probe -a aspeed_g6_pinctrl_probe [ 158.457252] detected buffer overflow in memcpy [ 158.458069] ------------[ cut here ]------------ [ 158.458283] kernel BUG at lib/string.c:1153! [ 158.458436] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 158.458768] Modules linked in: [ 158.459043] CPU: 1 PID: 99 Comm: perf Not tainted 5.9.0-rc7-00038-gc53ebf8167e9 #158 [ 158.459296] Hardware name: Generic DT based system [ 158.459529] PC is at fortify_panic+0x18/0x20 [ 158.459658] LR is at __irq_work_queue_local+0x3c/0x74 [ 158.459831] pc : [<8047451c>] lr : [<8020ecd4>] psr: 60000013 [ 158.460032] sp : be2d1d50 ip : be2d1c58 fp : be2d1d5c [ 158.460174] r10: 00000006 r9 : 00000000 r8 : 00000060 [ 158.460348] r7 : 8011e434 r6 : b9e0b800 r5 : 7f000000 r4 : b9fe4f0c [ 158.460557] r3 : 80c04cc8 r2 : 00000000 r1 : be7c03cc r0 : 00000022 [ 158.460801] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 158.461037] Control: 10c5387d Table: b9cd806a DAC: 00000051 [ 158.461251] Process perf (pid: 99, stack limit = 0x81c71a69) [ 158.461472] Stack: (0xbe2d1d50 to 0xbe2d2000) [ 158.461757] 1d40: be2d1d84 be2d1d60 8011e724 80474510 [ 158.462104] 1d60: b9e0b800 b9fe4f0c 00000000 b9fe4f14 80c8ec80 be235000 be2d1d9c be2d1d88 [ 158.462436] 1d80: 801cee44 8011e57c b9fe4f0c 00000000 be2d1dc4 be2d1da0 801d0ad0 801cedec [ 158.462742] 1da0: 00000000 00000000 b9fe4f00 ffffffea 00000000 be235000 be2d1de4 be2d1dc8 [ 158.463087] 1dc0: 80204604 801d0738 00000000 00000000 b9fe4004 ffffffea be2d1e94 be2d1de8 [ 158.463428] 1de0: 80205434 80204570 00385c00 00000000 00000000 00000000 be2d1e14 be2d1e08 [ 158.463880] 1e00: 802ba014 b9fe4f00 b9e718c0 b9fe4f84 b9e71ec8 be2d1e24 00000000 00385c00 [ 158.464365] 1e20: 00000000 626f7270 00000065 802b905c be2d1e94 0000002e 00000000 802b9914 [ 158.464829] 1e40: be2d1e84 be2d1e50 802b9914 8028ff78 804629d0 b9e71ec0 0000002e b9e71ec0 [ 158.465141] 1e60: be2d1ea8 80c04cc8 00000cc0 b9e713c4 00000002 80205834 80205834 0000002e [ 158.465488] 1e80: be235000 be235000 be2d1ea4 be2d1e98 80205854 80204e94 be2d1ecc be2d1ea8 [ 158.465806] 1ea0: 801ee4a0 80205840 00000002 80c04cc8 00000000 0000002e 0000002e 00000000 [ 158.466110] 1ec0: be2d1f0c be2d1ed0 801ee5c8 801ee428 00000000 be2d0000 006b1fd0 00000051 [ 158.466398] 1ee0: 00000000 b9eedf00 0000002e 80204410 006b1fd0 be2d1f60 00000000 00000004 [ 158.466763] 1f00: be2d1f24 be2d1f10 8020442c 801ee4c4 80205834 802c613c be2d1f5c be2d1f28 [ 158.467102] 1f20: 802c60ac 8020441c be2d1fac be2d1f38 8010c764 802e9888 be2d1f5c b9eedf00 [ 158.467447] 1f40: b9eedf00 006b1fd0 0000002e 00000000 be2d1f94 be2d1f60 802c634c 802c5fec [ 158.467812] 1f60: 00000000 00000000 00000000 80c04cc8 006b1fd0 00000003 76f7a610 00000004 [ 158.468155] 1f80: 80100284 be2d0000 be2d1fa4 be2d1f98 802c63ec 802c62e8 00000000 be2d1fa8 [ 158.468508] 1fa0: 80100080 802c63e0 006b1fd0 00000003 00000003 006b1fd0 0000002e 00000000 [ 158.468858] 1fc0: 006b1fd0 00000003 76f7a610 00000004 006b1fb0 0026d348 00000017 7ef2738c [ 158.469202] 1fe0: 76f3431c 7ef272d8 0014ec50 76f34338 60000010 00000003 00000000 00000000 [ 158.469461] Backtrace: [ 158.469683] [<80474504>] (fortify_panic) from [<8011e724>] (arch_prepare_optimized_kprobe+0x1b4/0x1f8) [ 158.470021] [<8011e570>] (arch_prepare_optimized_kprobe) from [<801cee44>] (alloc_aggr_kprobe+0x64/0x70) [ 158.470287] r9:be235000 r8:80c8ec80 r7:b9fe4f14 r6:00000000 r5:b9fe4f0c r4:b9e0b800 [ 158.470478] [<801cede0>] (alloc_aggr_kprobe) from [<801d0ad0>] (register_kprobe+0x3a4/0x5a0) [ 158.470685] r5:00000000 r4:b9fe4f0c [ 158.470790] [<801d072c>] (register_kprobe) from [<80204604>] (__register_trace_kprobe+0xa0/0xa4) [ 158.471001] r9:be235000 r8:00000000 r7:ffffffea r6:b9fe4f00 r5:00000000 r4:00000000 [ 158.471188] [<80204564>] (__register_trace_kprobe) from [<80205434>] (trace_kprobe_create+0x5ac/0x9ac) [ 158.471408] r7:ffffffea r6:b9fe4004 r5:00000000 r4:00000000 [ 158.471553] [<80204e88>] (trace_kprobe_create) from [<80205854>] (create_or_delete_trace_kprobe+0x20/0x3c) [ 158.471766] r10:be235000 r9:be235000 r8:0000002e r7:80205834 r6:80205834 r5:00000002 [ 158.471949] r4:b9e713c4 [ 158.472027] [<80205834>] (create_or_delete_trace_kprobe) from [<801ee4a0>] (trace_run_command+0x84/0x9c) [ 158.472255] [<801ee41c>] (trace_run_command) from [<801ee5c8>] (trace_parse_run_command+0x110/0x1f8) [ 158.472471] r6:00000000 r5:0000002e r4:0000002e [ 158.472594] [<801ee4b8>] (trace_parse_run_command) from [<8020442c>] (probes_write+0x1c/0x28) [ 158.472800] r10:00000004 r9:00000000 r8:be2d1f60 r7:006b1fd0 r6:80204410 r5:0000002e [ 158.472968] r4:b9eedf00 [ 158.473046] [<80204410>] (probes_write) from [<802c60ac>] (vfs_write+0xcc/0x1e8) [ 158.473226] [<802c5fe0>] (vfs_write) from [<802c634c>] (ksys_write+0x70/0xf8) [ 158.473400] r8:00000000 r7:0000002e r6:006b1fd0 r5:b9eedf00 r4:b9eedf00 [ 158.473567] [<802c62dc>] (ksys_write) from [<802c63ec>] (sys_write+0x18/0x1c) [ 158.473745] r9:be2d0000 r8:80100284 r7:00000004 r6:76f7a610 r5:00000003 r4:006b1fd0 [ 158.473932] [<802c63d4>] (sys_write) from [<80100080>] (ret_fast_syscall+0x0/0x54) [ 158.474126] Exception stack(0xbe2d1fa8 to 0xbe2d1ff0) [ 158.474305] 1fa0: 006b1fd0 00000003 00000003 006b1fd0 0000002e 00000000 [ 158.474573] 1fc0: 006b1fd0 00000003 76f7a610 00000004 006b1fb0 0026d348 00000017 7ef2738c [ 158.474811] 1fe0: 76f3431c 7ef272d8 0014ec50 76f34338 [ 158.475171] Code: e24cb004 e1a01000 e59f0004 ebf40dd3 (e7f001f2) [ 158.475847] ---[ end trace 55a5b31c08a29f00 ]--- [ 158.476088] Kernel panic - not syncing: Fatal exception [ 158.476375] CPU0: stopping [ 158.476709] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 5.9.0-rc7-00038-gc53ebf8167e9 #158 [ 158.477176] Hardware name: Generic DT based system [ 158.477411] Backtrace: [ 158.477604] [<8010dd28>] (dump_backtrace) from [<8010dfd4>] (show_stack+0x20/0x24) [ 158.477990] r7:00000000 r6:60000193 r5:00000000 r4:80c2f634 [ 158.478323] [<8010dfb4>] (show_stack) from [<8046390c>] (dump_stack+0xcc/0xe8) [ 158.478686] [<80463840>] (dump_stack) from [<80110750>] (handle_IPI+0x334/0x3a0) [ 158.479063] r7:00000000 r6:00000004 r5:80b65cc8 r4:80c78278 [ 158.479352] [<8011041c>] (handle_IPI) from [<801013f8>] (gic_handle_irq+0x88/0x94) [ 158.479757] r10:10c5387d r9:80c01ed8 r8:00000000 r7:c0802000 r6:80c0537c r5:000003ff [ 158.480146] r4:c080200c r3:fffffff4 [ 158.480364] [<80101370>] (gic_handle_irq) from [<80100b6c>] (__irq_svc+0x6c/0x90) [ 158.480748] Exception stack(0x80c01ed8 to 0x80c01f20) [ 158.481031] 1ec0: 000128bc 00000000 [ 158.481499] 1ee0: be7b8174 8011d3a0 80c00000 00000000 80c04cec 80c04d28 80c5d7c2 80a026d4 [ 158.482091] 1f00: 10c5387d 80c01f34 80c01f38 80c01f28 80109554 80109558 60000013 ffffffff [ 158.482621] r9:80c00000 r8:80c5d7c2 r7:80c01f0c r6:ffffffff r5:60000013 r4:80109558 [ 158.482983] [<80109518>] (arch_cpu_idle) from [<80818780>] (default_idle_call+0x38/0x120) [ 158.483360] [<80818748>] (default_idle_call) from [<801585a8>] (do_idle+0xd4/0x158) [ 158.483945] r5:00000000 r4:80c00000 [ 158.484237] [<801584d4>] (do_idle) from [<801588f4>] (cpu_startup_entry+0x28/0x2c) [ 158.484784] r9:80c78000 r8:00000000 r7:80c78000 r6:80c78040 r5:80c04cc0 r4:000000d6 [ 158.485328] [<801588cc>] (cpu_startup_entry) from [<80810a78>] (rest_init+0x9c/0xbc) [ 158.485930] [<808109dc>] (rest_init) from [<80b00ae4>] (arch_call_rest_init+0x18/0x1c) [ 158.486503] r5:80c04cc0 r4:00000001 [ 158.486857] [<80b00acc>] (arch_call_rest_init) from [<80b00fcc>] (start_kernel+0x46c/0x548) [ 158.487589] [<80b00b60>] (start_kernel) from [<00000000>] (0x0) ``` Fixes: e46daee53bb5 ("ARM: 8806/1: kprobes: Fix false positive with FORTIFY_SOURCE") Fixes: 0ac569bf6a79 ("ARM: 8834/1: Fix: kprobes: optimized kprobes illegal instruction") Suggested-by: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Tested-by: Luka Oreskovic <luka.oreskovic@sartura.hr> Tested-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Joel Stanley <joel@jms.id.au> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: Luka Oreskovic <luka.oreskovic@sartura.hr> Cc: Juraj Vijtiuk <juraj.vijtiuk@sartura.hr> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9017/2: Enable KASan for ARMLinus Walleij3-3/+4
This patch enables the kernel address sanitizer for ARM. XIP_KERNEL has not been tested and is therefore not allowed for now. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Acked-by: Dmitry Vyukov <dvyukov@google.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9016/2: Initialize the mapping of KASan shadow memoryLinus Walleij8-2/+362
This patch initializes KASan shadow region's page table and memory. There are two stage for KASan initializing: 1. At early boot stage the whole shadow region is mapped to just one physical page (kasan_zero_page). It is finished by the function kasan_early_init which is called by __mmap_switched(arch/arm/kernel/ head-common.S) 2. After the calling of paging_init, we use kasan_zero_page as zero shadow for some memory that KASan does not need to track, and we allocate a new shadow space for the other memory that KASan need to track. These issues are finished by the function kasan_init which is call by setup_arch. When using KASan we also need to increase the THREAD_SIZE_ORDER from 1 to 2 as the extra calls for shadow memory uses quite a bit of stack. As we need to make a temporary copy of the PGD when setting up shadow memory we create a helpful PGD_SIZE definition for both LPAE and non-LPAE setups. The KASan core code unconditionally calls pud_populate() so this needs to be changed from BUG() to do {} while (0) when building with KASan enabled. After the initial development by Andre Ryabinin several modifications have been made to this code: Abbott Liu <liuwenliang@huawei.com> - Add support ARM LPAE: If LPAE is enabled, KASan shadow region's mapping table need be copied in the pgd_alloc() function. - Change kasan_pte_populate,kasan_pmd_populate,kasan_pud_populate, kasan_pgd_populate from .meminit.text section to .init.text section. Reported by Florian Fainelli <f.fainelli@gmail.com> Linus Walleij <linus.walleij@linaro.org>: - Drop the custom mainpulation of TTBR0 and just use cpu_switch_mm() to switch the pgd table. - Adopt to handle 4th level page tabel folding. - Rewrite the entire page directory and page entry initialization sequence to be recursive based on ARM64:s kasan_init.c. Ard Biesheuvel <ardb@kernel.org>: - Necessary underlying fixes. - Crucial bug fixes to the memory set-up code. Co-developed-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Co-developed-by: Abbott Liu <liuwenliang@huawei.com> Co-developed-by: Ard Biesheuvel <ardb@kernel.org> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk> Reported-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9015/2: Define the virtual space of KASan's shadow regionLinus Walleij8-5/+127
Define KASAN_SHADOW_OFFSET,KASAN_SHADOW_START and KASAN_SHADOW_END for the Arm kernel address sanitizer. We are "stealing" lowmem (the 4GB addressable by a 32bit architecture) out of the virtual address space to use as shadow memory for KASan as follows: +----+ 0xffffffff | | | | |-> Static kernel image (vmlinux) BSS and page table | |/ +----+ PAGE_OFFSET | | | | |-> Loadable kernel modules virtual address space area | |/ +----+ MODULES_VADDR = KASAN_SHADOW_END | | | | |-> The shadow area of kernel virtual address. | |/ +----+-> TASK_SIZE (start of kernel space) = KASAN_SHADOW_START the | | shadow address of MODULES_VADDR | | | | | | | | |-> The user space area in lowmem. The kernel address | | | sanitizer do not use this space, nor does it map it. | | | | | | | | | | | | | |/ ------ 0 0 .. TASK_SIZE is the memory that can be used by shared userspace/kernelspace. It us used for userspace processes and for passing parameters and memory buffers in system calls etc. We do not need to shadow this area. KASAN_SHADOW_START: This value begins with the MODULE_VADDR's shadow address. It is the start of kernel virtual space. Since we have modules to load, we need to cover also that area with shadow memory so we can find memory bugs in modules. KASAN_SHADOW_END This value is the 0x100000000's shadow address: the mapping that would be after the end of the kernel memory at 0xffffffff. It is the end of kernel address sanitizer shadow area. It is also the start of the module area. KASAN_SHADOW_OFFSET: This value is used to map an address to the corresponding shadow address by the following formula: shadow_addr = (address >> 3) + KASAN_SHADOW_OFFSET; As you would expect, >> 3 is equal to dividing by 8, meaning each byte in the shadow memory covers 8 bytes of kernel memory, so one bit shadow memory per byte of kernel memory is used. The KASAN_SHADOW_OFFSET is provided in a Kconfig option depending on the VMSPLIT layout of the system: the kernel and userspace can split up lowmem in different ways according to needs, so we calculate the shadow offset depending on this. When kasan is enabled, the definition of TASK_SIZE is not an 8-bit rotated constant, so we need to modify the TASK_SIZE access code in the *.s file. The kernel and modules may use different amounts of memory, according to the VMSPLIT configuration, which in turn determines the PAGE_OFFSET. We use the following KASAN_SHADOW_OFFSETs depending on how the virtual memory is split up: - 0x1f000000 if we have 1G userspace / 3G kernelspace split: - The kernel address space is 3G (0xc0000000) - PAGE_OFFSET is then set to 0x40000000 so the kernel static image (vmlinux) uses addresses 0x40000000 .. 0xffffffff - On top of that we have the MODULES_VADDR which under the worst case (using ARM instructions) is PAGE_OFFSET - 16M (0x01000000) = 0x3f000000 so the modules use addresses 0x3f000000 .. 0x3fffffff - So the addresses 0x3f000000 .. 0xffffffff need to be covered with shadow memory. That is 0xc1000000 bytes of memory. - 1/8 of that is needed for its shadow memory, so 0x18200000 bytes of shadow memory is needed. We "steal" that from the remaining lowmem. - The KASAN_SHADOW_START becomes 0x26e00000, to KASAN_SHADOW_END at 0x3effffff. - Now we can calculate the KASAN_SHADOW_OFFSET for any kernel address as 0x3f000000 needs to map to the first byte of shadow memory and 0xffffffff needs to map to the last byte of shadow memory. Since: SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET 0x26e00000 = (0x3f000000 >> 3) + KASAN_SHADOW_OFFSET KASAN_SHADOW_OFFSET = 0x26e00000 - (0x3f000000 >> 3) KASAN_SHADOW_OFFSET = 0x26e00000 - 0x07e00000 KASAN_SHADOW_OFFSET = 0x1f000000 - 0x5f000000 if we have 2G userspace / 2G kernelspace split: - The kernel space is 2G (0x80000000) - PAGE_OFFSET is set to 0x80000000 so the kernel static image uses 0x80000000 .. 0xffffffff. - On top of that we have the MODULES_VADDR which under the worst case (using ARM instructions) is PAGE_OFFSET - 16M (0x01000000) = 0x7f000000 so the modules use addresses 0x7f000000 .. 0x7fffffff - So the addresses 0x7f000000 .. 0xffffffff need to be covered with shadow memory. That is 0x81000000 bytes of memory. - 1/8 of that is needed for its shadow memory, so 0x10200000 bytes of shadow memory is needed. We "steal" that from the remaining lowmem. - The KASAN_SHADOW_START becomes 0x6ee00000, to KASAN_SHADOW_END at 0x7effffff. - Now we can calculate the KASAN_SHADOW_OFFSET for any kernel address as 0x7f000000 needs to map to the first byte of shadow memory and 0xffffffff needs to map to the last byte of shadow memory. Since: SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET 0x6ee00000 = (0x7f000000 >> 3) + KASAN_SHADOW_OFFSET KASAN_SHADOW_OFFSET = 0x6ee00000 - (0x7f000000 >> 3) KASAN_SHADOW_OFFSET = 0x6ee00000 - 0x0fe00000 KASAN_SHADOW_OFFSET = 0x5f000000 - 0x9f000000 if we have 3G userspace / 1G kernelspace split, and this is the default split for ARM: - The kernel address space is 1GB (0x40000000) - PAGE_OFFSET is set to 0xc0000000 so the kernel static image uses 0xc0000000 .. 0xffffffff. - On top of that we have the MODULES_VADDR which under the worst case (using ARM instructions) is PAGE_OFFSET - 16M (0x01000000) = 0xbf000000 so the modules use addresses 0xbf000000 .. 0xbfffffff - So the addresses 0xbf000000 .. 0xffffffff need to be covered with shadow memory. That is 0x41000000 bytes of memory. - 1/8 of that is needed for its shadow memory, so 0x08200000 bytes of shadow memory is needed. We "steal" that from the remaining lowmem. - The KASAN_SHADOW_START becomes 0xb6e00000, to KASAN_SHADOW_END at 0xbfffffff. - Now we can calculate the KASAN_SHADOW_OFFSET for any kernel address as 0xbf000000 needs to map to the first byte of shadow memory and 0xffffffff needs to map to the last byte of shadow memory. Since: SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET 0xb6e00000 = (0xbf000000 >> 3) + KASAN_SHADOW_OFFSET KASAN_SHADOW_OFFSET = 0xb6e00000 - (0xbf000000 >> 3) KASAN_SHADOW_OFFSET = 0xb6e00000 - 0x17e00000 KASAN_SHADOW_OFFSET = 0x9f000000 - 0x8f000000 if we have 3G userspace / 1G kernelspace with full 1 GB low memory (VMSPLIT_3G_OPT): - The kernel address space is 1GB (0x40000000) - PAGE_OFFSET is set to 0xb0000000 so the kernel static image uses 0xb0000000 .. 0xffffffff. - On top of that we have the MODULES_VADDR which under the worst case (using ARM instructions) is PAGE_OFFSET - 16M (0x01000000) = 0xaf000000 so the modules use addresses 0xaf000000 .. 0xaffffff - So the addresses 0xaf000000 .. 0xffffffff need to be covered with shadow memory. That is 0x51000000 bytes of memory. - 1/8 of that is needed for its shadow memory, so 0x0a200000 bytes of shadow memory is needed. We "steal" that from the remaining lowmem. - The KASAN_SHADOW_START becomes 0xa4e00000, to KASAN_SHADOW_END at 0xaeffffff. - Now we can calculate the KASAN_SHADOW_OFFSET for any kernel address as 0xaf000000 needs to map to the first byte of shadow memory and 0xffffffff needs to map to the last byte of shadow memory. Since: SHADOW_ADDR = (address >> 3) + KASAN_SHADOW_OFFSET 0xa4e00000 = (0xaf000000 >> 3) + KASAN_SHADOW_OFFSET KASAN_SHADOW_OFFSET = 0xa4e00000 - (0xaf000000 >> 3) KASAN_SHADOW_OFFSET = 0xa4e00000 - 0x15e00000 KASAN_SHADOW_OFFSET = 0x8f000000 - The default value of 0xffffffff for KASAN_SHADOW_OFFSET is an error value. We should always match one of the above shadow offsets. When we do this, TASK_SIZE will sometimes get a bit odd values that will not fit into immediate mov assembly instructions. To account for this, we need to rewrite some assembly using TASK_SIZE like this: - mov r1, #TASK_SIZE + ldr r1, =TASK_SIZE or - cmp r4, #TASK_SIZE + ldr r0, =TASK_SIZE + cmp r4, r0 this is done to avoid the immediate #TASK_SIZE that need to fit into a limited number of bits. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Cc: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9014/2: Replace string mem* functions for KASanLinus Walleij6-3/+57
Functions like memset()/memmove()/memcpy() do a lot of memory accesses. If a bad pointer is passed to one of these functions it is important to catch this. Compiler instrumentation cannot do this since these functions are written in assembly. KASan replaces these memory functions with instrumented variants. The original functions are declared as weak symbols so that the strong definitions in mm/kasan/kasan.c can replace them. The original functions have aliases with a '__' prefix in their name, so we can call the non-instrumented variant if needed. We must use __memcpy()/__memset() in place of memcpy()/memset() when we copy .data to RAM and when we clear .bss, because kasan_early_init cannot be called before the initialization of .data and .bss. For the kernel compression and EFI libstub's custom string libraries we need a special quirk: even if these are built without KASan enabled, they rely on the global headers for their custom string libraries, which means that e.g. memcpy() will be defined to __memcpy() and we get link failures. Since these implementations are written i C rather than assembly we use e.g. __alias(memcpy) to redirected any users back to the local implementation. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Russell King - ARM Linux <rmk+kernel@armlinux.org.uk> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9013/2: Disable KASan instrumentation for some codeLinus Walleij4-1/+10
Disable instrumentation for arch/arm/boot/compressed/* since that code is executed before the kernel has even set up its mappings and definately out of scope for KASan. Disable instrumentation of arch/arm/vdso/* because that code is not linked with the kernel image, so the KASan management code would fail to link. Disable instrumentation of arch/arm/mm/physaddr.c. See commit ec6d06efb0ba ("arm64: Add support for CONFIG_DEBUG_VIRTUAL") for more details. Disable kasan check in the function unwind_pop_register because it does not matter that kasan checks failed when unwind_pop_register() reads the stack memory of a task. Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: kasan-dev@googlegroups.com Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Tested-by: Ard Biesheuvel <ardb@kernel.org> # QEMU/KVM/mach-virt/LPAE/8G Tested-by: Florian Fainelli <f.fainelli@gmail.com> # Brahma SoCs Tested-by: Ahmad Fatoum <a.fatoum@pengutronix.de> # i.MX6Q Reported-by: Florian Fainelli <f.fainelli@gmail.com> Reported-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Abbott Liu <liuwenliang@huawei.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9012/1: move device tree mapping out of linear regionArd Biesheuvel8-17/+38
On ARM, setting up the linear region is tricky, given the constraints around placement and alignment of the memblocks, and how the kernel itself as well as the DT are placed in physical memory. Let's simplify matters a bit, by moving the device tree mapping to the top of the address space, right between the end of the vmalloc region and the start of the the fixmap region, and create a read-only mapping for it that is independent of the size of the linear region, and how it is organized. Since this region was formerly used as a guard region, which will now be populated fully on LPAE builds by this read-only mapping (which will still be able to function as a guard region for stray writes), bump the start of the [underutilized] fixmap region by 512 KB as well, to ensure that there is always a proper guard region here. Doing so still leaves ample room for the fixmap space, even with NR_CPUS set to its maximum value of 32. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-27ARM: 9011/1: centralize phys-to-virt conversion of DT/ATAGS addressArd Biesheuvel6-17/+21
Before moving the DT mapping out of the linear region, let's prepare for this change by removing all the phys-to-virt translations of the __atags_pointer variable, and perform this translation only once at setup time. Tested-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Nicolas Pitre <nico@fluxnic.net> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2020-10-26Linux 5.10-rc1Linus Torvalds1-2/+2
2020-10-26treewide: Convert macro and uses of __section(foo) to __section("foo")Joe Perches117-196/+196
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25kernel/sys.c: fix prototype of prctl_get_tid_address()Rasmus Villemoes1-3/+3
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers6-8/+6
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25checkpatch: enable GIT_DIR environment use to set git repository locationJoe Perches1-5/+7
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25Merge tag 'timers-urgent-2020-10-25' of ↵Linus Torvalds3-1/+116
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
2020-10-25Merge tag 'sched-urgent-2020-10-25' of ↵Linus Torvalds2-5/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array
2020-10-25Merge tag 'perf-urgent-2020-10-25' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
2020-10-25Merge tag 'locking-urgent-2020-10-25' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fix from Thomas Gleixner: "Just a trivial fix for kernel-doc warnings" * tag 'locking-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/seqlocks: Fix kernel-doc warnings
2020-10-25Merge tag 'ntb-5.10' of git://github.com/jonmason/ntbLinus Torvalds3-5/+3
Pull NTB fixes from Jon Mason. * tag 'ntb-5.10' of git://github.com/jonmason/ntb: NTB: Use struct_size() helper in devm_kzalloc() ntb: intel: Fix memleak in intel_ntb_pci_probe NTB: hw: amd: fix an issue about leak system resources
2020-10-25Merge branch 'i2c/for-5.10' of ↵Linus Torvalds1-1/+10
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "Regression fix for rc1 and stable kernels as well" * 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: core: Restore acpi_walk_dep_device_list() getting called after registering the ACPI i2c devs
2020-10-25Merge tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds8-15/+213
Pull more cifs updates from Steve French: "Add support for stat of various special file types (WSL reparse points for char, block, fifo)" * tag '5.10-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number smb3: add some missing definitions from MS-FSCC smb3: remove two unused variables smb3: add support for stat of WSL reparse points for special file types
2020-10-25Merge branch 'parisc-5.10-2' of ↵Linus Torvalds7-19/+111
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull more parisc updates from Helge Deller: - During this merge window O_NONBLOCK was changed to become 000200000, but we missed that the syscalls timerfd_create(), signalfd4(), eventfd2(), pipe2(), inotify_init1() and userfaultfd() do a strict bit-wise check of the flags parameter. To provide backward compatibility with existing userspace we introduce parisc specific wrappers for those syscalls which filter out the old O_NONBLOCK value and replaces it with the new one. - Prevent HIL bus driver to get stuck when keyboard or mouse isn't attached - Improve error return codes when setting rtc time - Minor documentation fix in pata_ns87415.c * 'parisc-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: ata: pata_ns87415.c: Document support on parisc with superio chip parisc: Add wrapper syscalls to fix O_NONBLOCK flag usage hil/parisc: Disable HIL driver when it gets stuck parisc: Improve error return codes when setting rtc time
2020-10-25Merge tag 'for-linus-5.10b-rc1c-tag' of ↵Linus Torvalds12-126/+152
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull more xen updates from Juergen Gross: - a series for the Xen pv block drivers adding module parameters for better control of resource usge - a cleanup series for the Xen event driver * tag 'for-linus-5.10b-rc1c-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: Documentation: add xen.fifo_events kernel parameter description xen/events: unmask a fifo event channel only if it was masked xen/events: only register debug interrupt for 2-level events xen/events: make struct irq_info private to events_base.c xen: remove no longer used functions xen-blkfront: Apply changed parameter name to the document xen-blkfront: add a parameter for disabling of persistent grants xen-blkback: add a parameter for disabling of persistent grants
2020-10-25Merge tag 'safesetid-5.10' of git://github.com/micah-morton/linuxLinus Torvalds7-125/+336
Pull SafeSetID updates from Micah Morton: "The changes are mostly contained to within the SafeSetID LSM, with the exception of a few 1-line changes to change some ns_capable() calls to ns_capable_setid() -- causing a flag (CAP_OPT_INSETID) to be set that is examined by SafeSetID code and nothing else in the kernel. The changes to SafeSetID internally allow for setting up GID transition security policies, as already existed for UIDs" * tag 'safesetid-5.10' of git://github.com/micah-morton/linux: LSM: SafeSetID: Fix warnings reported by test bot LSM: SafeSetID: Add GID security policy handling LSM: Signal to SafeSetID when setting group IDs
2020-10-25Merge tag '20201024-v4-5.10' of ↵Linus Torvalds5-190/+404
git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom Pull random32 updates from Willy Tarreau: "Make prandom_u32() less predictable. This is the cleanup of the latest series of prandom_u32 experimentations consisting in using SipHash instead of Tausworthe to produce the randoms used by the network stack. The changes to the files were kept minimal, and the controversial commit that used to take noise from the fast_pool (f227e3ec3b5c) was reverted. Instead, a dedicated "net_rand_noise" per_cpu variable is fed from various sources of activities (networking, scheduling) to perturb the SipHash state using fast, non-trivially predictable data, instead of keeping it fully deterministic. The goal is essentially to make any occasional memory leakage or brute-force attempt useless. The resulting code was verified to be very slightly faster on x86_64 than what is was with the controversial commit above, though this remains barely above measurement noise. It was also tested on i386 and arm, and build- tested only on arm64" Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ * tag '20201024-v4-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wtarreau/prandom: random32: add a selftest for the prandom32 code random32: add noise from network and scheduling activity random32: make prandom_u32() output unpredictable
2020-10-25i2c: core: Restore acpi_walk_dep_device_list() getting called after ↵Hans de Goede1-1/+10
registering the ACPI i2c devs Commit 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()")'s intention was to only move the acpi_install_address_space_handler() call to the point before where the ACPI declared i2c-children of the adapter where instantiated by i2c_acpi_register_devices(). But i2c_acpi_install_space_handler() had a call to acpi_walk_dep_device_list() hidden (that is I missed it) at the end of it, so as an unwanted side-effect now acpi_walk_dep_device_list() was also being called before i2c_acpi_register_devices(). Move the acpi_walk_dep_device_list() call to the end of i2c_acpi_register_devices(), so that it is once again called *after* the i2c_client-s hanging of the adapter have been created. This fixes the Microsoft Surface Go 2 hanging at boot. Fixes: 21653a4181ff ("i2c: core: Call i2c_acpi_install_space_handler() before i2c_acpi_register_devices()") Link: https://bugzilla.kernel.org/show_bug.cgi?id=209627 Reported-by: Rainer Finke <rainer@finke.cc> Reported-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Suggested-by: Maximilian Luz <luzmaximilian@gmail.com> Tested-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2020-10-24Merge tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds21-108/+222
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph - rdma error handling fixes (Chao Leng) - fc error handling and reconnect fixes (James Smart) - fix the qid displace when tracing ioctl command (Keith Busch) - don't use BLK_MQ_REQ_NOWAIT for passthru (Chaitanya Kulkarni) - fix MTDT for passthru (Logan Gunthorpe) - blacklist Write Same on more devices (Kai-Heng Feng) - fix an uninitialized work struct (zhenwei pi)" - lightnvm out-of-bounds fix (Colin) - SG allocation leak fix (Doug) - rnbd fixes (Gioh, Guoqing, Jack) - zone error translation fixes (Keith) - kerneldoc markup fix (Mauro) - zram lockdep fix (Peter) - Kill unused io_context members (Yufen) - NUMA memory allocation cleanup (Xianting) - NBD config wakeup fix (Xiubo) * tag 'block-5.10-2020-10-24' of git://git.kernel.dk/linux-block: (27 commits) block: blk-mq: fix a kernel-doc markup nvme-fc: shorten reconnect delay if possible for FC nvme-fc: wait for queues to freeze before calling update_hr_hw_queues nvme-fc: fix error loop in create_hw_io_queues nvme-fc: fix io timeout to abort I/O null_blk: use zone status for max active/open nvmet: don't use BLK_MQ_REQ_NOWAIT for passthru nvmet: cleanup nvmet_passthru_map_sg() nvmet: limit passthru MTDS by BIO_MAX_PAGES nvmet: fix uninitialized work for zero kato nvme-pci: disable Write Zeroes on Sandisk Skyhawk nvme: use queuedata for nvme_req_qid nvme-rdma: fix crash due to incorrect cqe nvme-rdma: fix crash when connect rejected block: remove unused members for io_context blk-mq: remove the calling of local_memory_node() zram: Fix __zram_bvec_{read,write}() locking order skd_main: remove unused including <linux/version.h> sgl_alloc_order: fix memory leak lightnvm: fix out-of-bounds write to array devices->info[] ...
2020-10-24Merge tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds5-118/+191
Pull io_uring fixes from Jens Axboe: - fsize was missed in previous unification of work flags - Few fixes cleaning up the flags unification creds cases (Pavel) - Fix NUMA affinities for completely unplugged/replugged node for io-wq - Two fallout fixes from the set_fs changes. One local to io_uring, one for the splice entry point that io_uring uses. - Linked timeout fixes (Pavel) - Removal of ->flush() ->files work-around that we don't need anymore with referenced files (Pavel) - Various cleanups (Pavel) * tag 'io_uring-5.10-2020-10-24' of git://git.kernel.dk/linux-block: splice: change exported internal do_splice() helper to take kernel offset io_uring: make loop_rw_iter() use original user supplied pointers io_uring: remove req cancel in ->flush() io-wq: re-set NUMA node affinities if CPUs come online io_uring: don't reuse linked_timeout io_uring: unify fsize with def->work_flags io_uring: fix racy REQ_F_LINK_TIMEOUT clearing io_uring: do poll's hash_node init in common code io_uring: inline io_poll_task_handler() io_uring: remove extra ->file check in poll prep io_uring: make cached_cq_overflow non atomic_t io_uring: inline io_fail_links() io_uring: kill ref get/drop in personality init io_uring: flags-based creds init in queue
2020-10-24Merge tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-blockLinus Torvalds4-4/+4
Pull libata fixes from Jens Axboe: "Two minor libata fixes: - Fix a DMA boundary mask regression for sata_rcar (Geert) - kerneldoc markup fix (Mauro)" * tag 'libata-5.10-2020-10-24' of git://git.kernel.dk/linux-block: ata: fix some kernel-doc markups ata: sata_rcar: Fix DMA boundary mask
2020-10-24Merge branch 'work.misc' of ↵Linus Torvalds47-129/+308
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc vfs updates from Al Viro: "Assorted stuff all over the place (the largest group here is Christoph's stat cleanups)" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: remove KSTAT_QUERY_FLAGS fs: remove vfs_stat_set_lookup_flags fs: move vfs_fstatat out of line fs: implement vfs_stat and vfs_lstat in terms of vfs_fstatat fs: remove vfs_statx_fd fs: omfs: use kmemdup() rather than kmalloc+memcpy [PATCH] reduce boilerplate in fsid handling fs: Remove duplicated flag O_NDELAY occurring twice in VALID_OPEN_FLAGS selftests: mount: add nosymfollow tests Add a "nosymfollow" mount option.
2020-10-24Merge tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds5-32/+68
Pull dma-mapping fixes from Christoph Hellwig: - document the new dma_{alloc,free}_pages() API - two fixups for the dma-mapping.h split * tag 'dma-mapping-5.10-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: document dma_{alloc,free}_pages dma-mapping: move more functions to dma-map-ops.h ARM/sa1111: add a missing include of dma-map-ops.h
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 06:00:45 +0300