summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-01-27dma/fence: Export enable-signaling tracepoint for emission by driversChris Wilson1-0/+1
Currently this tracepoint is solely used by dma_fence_enable_sw_signaling, however I have a need to manually perform the hw enabling of the signaling and would like to emit this tracepoint for completeness. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170124115758.31353-1-chris@chris-wilson.co.uk
2017-01-27drm/tilcdc: Remove tilcdc_debugfs_cleanup()Noralf Trønnes2-14/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Also remove the unused tilcdc_module_ops.debugfs_cleanup() callback. drm_debugfs_cleanup() removes all debugfs files using debugfs_remove_recursive(), so there should be no need for such a callback in the future. Cc: jsarha@ti.com Cc: tomi.valkeinen@ti.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-16-noralf@tronnes.org
2017-01-27drm/tegra: Remove tegra_debugfs_cleanup()Noralf Trønnes1-7/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: thierry.reding@gmail.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-15-noralf@tronnes.org
2017-01-27drm/sti: Remove drm_debugfs_remove_files() callsNoralf Trønnes5-82/+6
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so it's not necessary to call drm_debugfs_remove_files(). Additionally it uses debugfs_remove_recursive() to clean up the debugfs files, so no need for adding fake drm_info_node entries. Cc: benjamin.gaignard@linaro.org Cc: vincent.abriou@st.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com> Tested-by: Vincent Abriou <vincent.abriou@st.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-14-noralf@tronnes.org
2017-01-27drm/radeon: Remove drm_debugfs_remove_files() callNoralf Trønnes1-16/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so it's not necessary to call drm_debugfs_remove_files(). Cc: alexander.deucher@amd.com Cc: christian.koenig@amd.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-13-noralf@tronnes.org
2017-01-27drm/omap: Remove omap_debugfs_cleanup()Noralf Trønnes3-11/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: tomi.valkeinen@ti.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-12-noralf@tronnes.org
2017-01-27drm/hdlcd: Remove hdlcd_debugfs_cleanup()Noralf Trønnes1-7/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: liviu.dudau@arm.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-9-noralf@tronnes.org
2017-01-27drm/etnaviv: Remove etnaviv_debugfs_cleanup()Noralf Trønnes1-7/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: l.stach@pengutronix.de Cc: linux+etnaviv@armlinux.org.uk Cc: christian.gmeiner@gmail.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-8-noralf@tronnes.org
2017-01-27drm/etnaviv: allow build with COMPILE_TESTNoralf Trønnes1-1/+1
Make it possible to compile test the driver on other platforms. Cc: l.stach@pengutronix.de Cc: linux+etnaviv@armlinux.org.uk Cc: christian.gmeiner@gmail.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-7-noralf@tronnes.org
2017-01-27drm/amd/amdgpu: Remove drm_debugfs_remove_files() callNoralf Trønnes3-22/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so no need to call drm_debugfs_remove_files(). Also remove empty drm_driver.debugfs_cleanup callback. Cc: alexander.deucher@amd.com Cc: christian.koenig@amd.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-5-noralf@tronnes.org
2017-01-27drm/prime: Clarify DMA-BUF/GEM Object lifetimeOleksandr Andrushchenko1-2/+15
From the description of the "DMA-BUF/GEM Object references and lifetime overview" it is not clear when exactly dma_buf gets destroyed and memory freed: only driver .release function mentioned which makes confusion on the real buffer's lifetime. Add more description so all the paths are covered. Cc: Rob Clark <robdclark@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com> [danvet: Minor spelling fixes, and some clarification of the 2nd paragraph.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485500665-27690-1-git-send-email-andr2000@gmail.com
2017-01-27drm/ttm: Make sure BOs being swapped out are cacheableMichel Dänzer1-2/+2
The current caching state may not be tt_cached, even though the placement contains TTM_PL_FLAG_CACHED, because placement can contain multiple caching flags. Trying to swap out such a BO would trip up the BUG_ON(ttm->caching_state != tt_cached); in ttm_tt_swapout. Cc: stable@vger.kernel.org Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Christian König <christian.koenig@amd.com>. Reviewed-by: Sinclair Yeh <syeh@vmware.com> Signed-off-by: Christian König <christian.koenig@amd.com>
2017-01-27drm/atomic: Remove drm_atomic_debugfs_cleanup()Noralf Trønnes3-17/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so no need to call drm_debugfs_remove_files(). Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-4-noralf@tronnes.org
2017-01-27drm: drm_minor_register(): Clean up debugfs on failureNoralf Trønnes1-1/+1
Call drm_debugfs_cleanup() in case drm_debugfs_init() fails to cover for failure in the drm_driver.debugfs_init callback. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-3-noralf@tronnes.org
2017-01-27drm: debugfs: Remove all files automatically on cleanupNoralf Trønnes1-3/+17
Instead of having the drivers call drm_debugfs_remove_files() in their drm_driver->debugfs_cleanup hook, do it automatically by traversing minor->debugfs_list. Also use debugfs_remove_recursive() so drivers who add their own debugfs files don't have to keep track of them for removal. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-2-noralf@tronnes.org
2017-01-27drm/fourcc: add vivante tiled layout format modifiersPhilipp Zabel1-0/+41
Vivante GC hardware uses simple 4x4 tiled and nested 64x64 supertiled formats as well as so-called split-tiled variants for dual-pipe hardware, where even and odd tiles start at different base addresses. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-By: Wladimir J. van der Laan <laanwj@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126153217.26916-1-p.zabel@pengutronix.de
2017-01-26drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-FVille Syrjälä1-0/+14
CEA-861-F tells us: "When transmitting any RGB colorimetry, the Source should set the YQ-field to match the RGB Quantization Range being transmitted (e.g., when Limited Range RGB, set YQ=0 or when Full Range RGB, set YQ=1) and the Sink shall ignore the YQ-field." So let's go ahead and do that. Perhaps there are sinks that don't ignore the YQ as they should for RGB? I wasn't able to find similar text in CEA-861-E, so it would seem to be a fairly "recent" addition. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-6-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Set AVI infoframe Q even when QS=0Ville Syrjälä4-4/+13
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe even when the sink does not support quantization range selection (QS=0). According to CEA-861 we can do that as long as the Q we send matches the default quantization range for the mode. Previously I think I had misread the spec as saying that you can't send a non-zero Q at all when QS=0. But that's not what the spec actually says. v2: Fix typo in commit message (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()Ville Syrjälä4-17/+40
Pull the logic to populate the quantization range information in the AVI infoframe into a small helper. We'll be adding a bit more logic to it, and having it in a central place seems like a good idea since it's based on the CEA-861 spec. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Introduce drm_default_rgb_quant_range()Ville Syrjälä5-3/+29
Make the code selecting the RGB quantization range a little less magicy by wrapping it up in a small helper. v2: s/adjusted_mode/mode in vc4 to make it actually compile v3: Add a comment proposed by Eric Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Have drm_edid.h include hdmi.hVille Syrjälä1-2/+1
drm_edid.h depends on hdmi.h on account of enum hdmi_picture_aspect, so let's just include hdmi.h and drop some useless struct declarations. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-2-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm: Silence the compiler for drm_mode_get_hv_timings()Chris Wilson1-2/+1
Since moving drm_crtc_get_hv_timings() into drm_modes.c, the compiler has been able to get smarter and spots that drm_mode_copy() is trying to preserve garbage from the stack. Fixes: 196cd5d3758c ("drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126114409.9115-1-chris@chris-wilson.co.uk
2017-01-26drm/doc: Fix typos for early_unregister docDaniel Vetter3-3/+3
There's no late_unregister. While at it switch to the new canonical reference style. Cc: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-14-daniel.vetter@ffwll.ch
2017-01-26drm: s/drm_crtc_get_hv_timings/drm_mode_get_hv_timings/Daniel Vetter6-27/+27
The function operates on modes, not CRTCs. Also move it into drm_modes.[hc]. Spotted while reviewing CRTC docs. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-15-daniel.vetter@ffwll.ch
2017-01-26drm/moc: Mark legacy fields in drm_driver as suchDaniel Vetter2-6/+8
No point in documenting these, they only confuse. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-13-daniel.vetter@ffwll.ch
2017-01-26drm: Nuke ums vgaarb supportDaniel Vetter2-29/+0
i915, nouveau (ever since merged to upstream) and radeon all lack ums support in upstream. No point keeping the ums vgaarb support around. Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-12-daniel.vetter@ffwll.ch
2017-01-26drm: remove device_is_agp callbackDaniel Vetter7-33/+6
With that the drm_pci_device_is_agp function becomes trivial, so inline that too. And while at it, move the drm_pci_agp_destroy declaration into drm-internal.h, since it's not used by drivers. Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Ben Skeggs <bskeggs@redhat.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-11-daniel.vetter@ffwll.ch
2017-01-26drm/mga: remove device_is_agp callbackDaniel Vetter2-38/+19
It's only for a device quirk, and we might as well do that in the load callback. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-10-daniel.vetter@ffwll.ch
2017-01-26drm/i810: drop device_is_agp callbackDaniel Vetter4-18/+10
Use the same trick we used for i915 when we still had ums support: Just initialize the agp support unconditionally in the driver load function. Unfortunately that means we need to export drm_agp_init again, but I think that's a lesser evil. Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-9-daniel.vetter@ffwll.ch
2017-01-26drm/doc: Clarify connector overviewDaniel Vetter1-5/+4
There was a bit of mix-up between initialization and registering. v2: Review from Gustavo. Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-7-daniel.vetter@ffwll.ch Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch
2017-01-25drm: Update kerneldoc for drm_crtc.[hc]Daniel Vetter3-7/+47
After going through all the trouble of splitting out parts from drm_crtc.[hc] and then properly documenting each I've entirely forgotten to show the same TLC for CRTCs themselves! Let's make amends asap. v2: Review from Eric. Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2017-01-25drm/gma500: Nuke device_is_agp callbackDaniel Vetter1-6/+0
Returning 0 for an on-chip gpu doesn't change anything at all. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-8-daniel.vetter@ffwll.ch
2017-01-25drm/kms-core: Use recommened kerneldoc for struct member refsDaniel Vetter21-147/+150
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Eric. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-4-daniel.vetter@ffwll.ch
2017-01-25drm/core: Use recommened kerneldoc for struct member refsDaniel Vetter10-33/+33
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Review from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-6-daniel.vetter@ffwll.ch
2017-01-25drm/gem|prime|mm: Use recommened kerneldoc for struct member refsDaniel Vetter4-23/+23
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-5-daniel.vetter@ffwll.ch
2017-01-25drm/kms-helpers: Use recommened kerneldoc for struct member refsDaniel Vetter11-181/+197
I just learned that &struct_name.member_name works and looks pretty even. It doesn't (yet) link to the member directly though, which would be really good for big structures or vfunc tables (where the per-member kerneldoc tends to be long). Also some minor drive-by polish where it makes sense, I read a lot of docs ... v2: Comments from Gustavo. Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Rewiewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170125062657.19270-2-daniel.vetter@ffwll.ch
2017-01-25drm/dp: Store drm_device in MST topology managerDhinakaran Pandiyan5-8/+12
struct drm_dp_mst_topology_mgr currently stores a pointer to struct dev. Changing this to instead hold a pointer to drm_device is more useful as it gives access to DRM structures. This also makes it consistent with other DRM structures like drm_crtc, drm_connector etc. Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Reviewed-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1485301777-3465-2-git-send-email-dhinakaran.pandiyan@intel.com
2017-01-24drm/vgem: Switch to reservation_object_lock() helpersChris Wilson1-2/+2
For the convenience of encapsulation the reservation object's ww_mutex was wrapped in pair of lock/unlock helpers. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170123095357.29514-1-chris@chris-wilson.co.uk
2017-01-24drm/simple-helpers: Add missing includesNoralf Trønnes1-0/+4
Add missing includes to pull in definitions for drm_crtc, drm_plane and drm_encoder. Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170122181117.8210-4-noralf@tronnes.org
2017-01-24drm/fb-cma-helper: Add drm_fbdev_cma_set_suspend_unlocked()Noralf Trønnes2-0/+20
Add a CMA version of drm_fb_helper_set_suspend_unlocked(). Cc: laurent.pinchart@ideasonboard.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170122181117.8210-2-noralf@tronnes.org
2017-01-24drm: Update drm_cache.c to pull in the new drm_cache.hChris Wilson1-1/+3
The prototypes were moved to a new header, but the function definitions were not updated to pull in the declarations. drivers/gpu/drm/drm_cache.c:79:1: warning: no previous prototype for ‘drm_clflush_pages’ [-Wmissing-prototypes] drivers/gpu/drm/drm_cache.c:120:1: warning: no previous prototype for ‘drm_clflush_sg’ [-Wmissing-prototypes] drivers/gpu/drm/drm_cache.c:152:1: warning: no previous prototype for ‘drm_clflush_virt_range’ [-Wmissing-prototypes] Fixes: f9a87bd7d5b6 ("drm: Move drm_clflush prototypes to drm_cache header file") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170121181944.24672-1-chris@chris-wilson.co.uk
2017-01-24drm: bridge: dw-hdmi: fix building without CONFIG_OFArnd Bergmann1-0/+2
The of_node member in struct drm_bridge is hidden when CONFIG_OF is disabled, causing a build error: drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe': drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node' We could fix this either using a Kconfig dependency on CONFIG_OF or making the one line conditional. The latter gives us better compile test coverage, so this is what I'm doing here. Fixes: 69497eb9234e ("drm: bridge: dw-hdmi: Implement DRM bridge registration") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de
2017-01-23drm/exynos: Remove Kconfig deps for FIMD and DECON7Tobias Jakobi1-2/+0
While the Kconfig entries of FIMD and DECON7 both select FB_MODE_HELPERS, the code doesn't use any of the functionality. Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1484928172-16784-1-git-send-email-tjakobi@math.uni-bielefeld.de
2017-01-23drm: Show leaked connectors upon unloadChris Wilson1-1/+6
After warning that the connector list is not empty on device unregistration (i.e. module unload) also print out which connectors are still hanging around to aide finding the leak. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170119090513.4154-1-chris@chris-wilson.co.uk
2017-01-23lib/prime_numbers: Suppress warn on kmalloc failureChris Wilson1-1/+2
The allocation for the bitmap may become very large, larger than MAX_ORDER, for large requests. We fail gracefully by falling back to trail-division, so disable the warning from kmalloc: 521.961092] WARNING: CPU: 0 PID: 30637 at mm/page_alloc.c:3548 __alloc_pages_slowpath+0x237/0x9a0 [ 521.961105] Modules linked in: i915(+) drm_kms_helper intel_gtt prime_numbers [last unloaded: drm_kms_helper] [ 521.961126] CPU: 0 PID: 30637 Comm: drv_selftest Tainted: G U W 4.10.0-rc3+ #321 [ 521.961137] Hardware name: / , BIOS PYBSWCEL.86A.0027.2015.0507.1758 05/07/2015 [ 521.961148] Call Trace: [ 521.961161] dump_stack+0x4d/0x6f [ 521.961172] __warn+0xc1/0xe0 [ 521.961181] warn_slowpath_null+0x18/0x20 [ 521.961189] __alloc_pages_slowpath+0x237/0x9a0 [ 521.961200] ? sg_init_table+0x1a/0x40 [ 521.961208] ? get_page_from_freelist+0x3fa/0x910 [ 521.961275] ? i915_gem_object_get_sg+0x272/0x2b0 [i915] [ 521.961285] __alloc_pages_nodemask+0x1ea/0x220 [ 521.961295] kmalloc_order+0x1c/0x50 [ 521.961304] __kmalloc+0x115/0x170 [ 521.961314] expand_to_next_prime+0x43/0x180 [prime_numbers] [ 521.961324] next_prime_number+0x47/0xc0 [prime_numbers] [ 521.961377] igt_vma_rotate+0x386/0x590 [i915] [ 521.961429] i915_subtests+0x37/0xc0 [i915] [ 521.961481] i915_vma_mock_selftests+0x3d/0x70 [i915] [ 521.961532] run_selftests+0x16e/0x1f0 [i915] [ 521.961541] ? 0xffffffffa02a4000 [ 521.961592] i915_mock_selftests+0x29/0x40 [i915] [ 521.961638] i915_init+0xa/0x5e [i915] [ 521.961646] ? 0xffffffffa02a4000 [ 521.961655] do_one_initcall+0x3e/0x160 [ 521.961664] ? __vunmap+0x7c/0xc0 [ 521.961672] ? vfree+0x29/0x70 [ 521.961680] ? kmem_cache_alloc+0xcf/0x120 [ 521.961690] do_init_module+0x55/0x1c4 [ 521.961699] load_module+0x1f3f/0x25b0 [ 521.961707] ? __symbol_put+0x40/0x40 [ 521.961716] ? kernel_read_file+0x100/0x190 [ 521.961725] SYSC_finit_module+0xbc/0xf0 [ 521.961734] SyS_finit_module+0x9/0x10 [ 521.961744] entry_SYSCALL_64_fastpath+0x17/0x98 [ 521.961752] RIP: 0033:0x7f111aca4119 [ 521.961760] RSP: 002b:00007ffd8be6cbe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 521.961773] RAX: ffffffffffffffda RBX: 0000000000000006 RCX: 00007f111aca4119 [ 521.961781] RDX: 0000000000000000 RSI: 000055dfc18bc8e0 RDI: 0000000000000006 [ 521.961789] RBP: 00007ffd8be6bbe0 R08: 0000000000000000 R09: 0000000000000000 [ 521.961796] R10: 0000000000000006 R11: 0000000000000246 R12: 0000000000000005 [ 521.961805] R13: 000055dfc18bd3a0 R14: 00007ffd8be6bbc0 R15: 0000000000000005 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170113235119.22528-1-chris@chris-wilson.co.uk
2017-01-23drm/hisilicon/hibmc: Fix wrong pointer passed to PTR_ERR()Wei Yongjun1-1/+1
PTR_ERR should access the value just tested by IS_ERR, otherwise the wrong error code will be returned. Fixes: d1667b86795a ("drm/hisilicon/hibmc: Add support for frame buffer") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170112151921.16538-1-weiyj.lk@gmail.com
2017-01-23drm/atomic: make release_crtc_commit() staticWei Yongjun1-1/+1
Fixes the following sparse warning: drivers/gpu/drm/drm_atomic_helper.c:1360:6: warning: symbol 'release_crtc_commit' was not declared. Should it be static? Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170112142157.14684-1-weiyj.lk@gmail.com
2017-01-19drm: qxl: Open code teardown function for qxlGabriel Krisman Bertazi3-20/+9
This avoids using the deprecated drm_put_dev() and unload() hook interfaces in the qxl driver. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-2-krisman@collabora.co.uk
2017-01-19drm: qxl: Open code probing sequence for qxlGabriel Krisman Bertazi5-48/+74
This avoids using the deprecated drm_get_pci_dev() and load() hook interfaces in the qxl driver. The only tricky part is to ensure TTM debugfs initialization happens after the debugfs root node is created, which is done by moving that code into the debufs_init() hook. Tested on qemu with igt and running a WM on top of X. Changes since v1: - Drop verification for primary minor in qxl_debugsfs_init. Changes since V2: - Put new header together with other debugfs headers. Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Cc: Dave Airlie <airlied@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gustavo Padovan <gustavo.padovan@collabora.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170119134806.8926-1-krisman@collabora.co.uk
2017-01-19drm/bridge: adv7511: Re-write the i2c address before EDID probingJohn Stultz1-1/+9
I've found that by just turning the chip on and off via the POWER_DOWN register, I end up getting i2c_transfer errors on HiKey. Investigating further, it turns out that some of the register state in hardware is getting lost, as the device registers are reset when the chip is powered down. Thus this patch simply re-writes the i2c address to the ADV7511_REG_EDID_I2C_ADDR register to ensure its properly set before we try to read the EDID data. Cc: David Airlie <airlied@linux.ie> Cc: Archit Taneja <architt@codeaurora.org> Cc: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: dri-devel@lists.freedesktop.org Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: John Stultz <john.stultz@linaro.org> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1484614372-15342-7-git-send-email-john.stultz@linaro.org
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 04:39:47 +0300