summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-03-07ARM: sun6i: Enable the I2C muxing optionsMaxime Ripard1-0/+21
The i2c controllers have a few muxing options on the A31. Enable the ones found in the A31 Colombus board. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-07ARM: sun6i: Enable the I2C controllersMaxime Ripard1-0/+40
The A31 has 4 I2C controllers that are the same than the one in the other Allwinner SoCs, except for the fact that they are asserted in reset by the reset unit. Add these i2c controllers to the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add support for the INet-97F_Rev_02 boardDavid Lanzendörfer2-0/+70
This patch adds basic support for the INet-97F_Rev_02 board found in various low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02) Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add support for the A10-OLinuXino-LIME boardHans de Goede2-0/+112
This add support for the A10-OLinuXino-LIME: https://www.olimex.com/Products/OLinuXino/A10/A10-OLinuXino-LIME A low cost Allwinner A10 based dev-board, with sata, ethernet, hdmi and 2x USB. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to a20-olinuxino-micro dtsZalan Blenessy1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to cubieboard2 dtsRoman Byshko1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host nodes to cubietruck dtsHans de Goede1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to a13-olinuxino-microHans de Goede1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to a10s-olinuxino-microHans de Goede1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host nodes to A13-OlinuxinoRoman Byshko1-0/+27
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to pcduino.dtsHans de Goede1-0/+31
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to mini-xplus dtsHans de Goede1-0/+31
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to hackberry dtsHans de Goede1-0/+40
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Based on fex file settings, the fex file also contains a mysterious line: usb_hub_vcc_en_gpio = port:PB09<1><0><default><0> Which also clashes with usbc0, which has: usb_drv_vbus_gpio = port:PB09<1><0><default><0> So if usb does not work properly we need someone with a hackberry to look closer into this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to cubieboard dtsRoman Byshko1-0/+30
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host nodes to Mele A1000 dtsRoman Byshko1-0/+31
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add USB host bindingsRoman Byshko1-0/+52
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun5i: dt: Add USB host bindingsRoman Byshko2-0/+64
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add USB host bindingsRoman Byshko1-0/+52
Add nodes for the usb-phy and ehci- and ohci-usb-host controllers. Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun7i: dt: Add ahci / sata supportHans de Goede4-0/+47
This patch adds sunxi sata support to A20 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sun4i: dt: Add ahci / sata supportOliver Schinagl3-0/+22
This patch adds sunxi sata support to A10 boards that have such a connector. Some boards also feature a regulator via a GPIO and support for this is also added. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-03-04ARM: sunxi: dt: Add sunxi-common-regulators include fileHans de Goede1-0/+75
Most sunxi boards with a sata connector also have a gpio controlled connector for sata target power and almost all sunxi boards have a gpio controlled vbus for usb1 and usb2. This commit adds an include file for the regulators representing these supplies, avoiding the need to copy and paste the regulator code to allmost all sunxi board dts files. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-28ARM: sun6i: dt: Fix mod0 compatibleMaxime Ripard1-4/+4
The module 0 clock compatibles were changed between the time the patch was sent and it was merged. Update the compatibles. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dts: sun7i: Enable the SPI controllers of the A20-olinuxino-microMaxime Ripard1-0/+17
The A20-Olinuxino-micro has two SPI bus exposed on its UEXT connectors, enable them. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun7i: Add SPI muxing optionsMaxime Ripard1-0/+14
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun5i: Add A13 SPI controller nodesMaxime Ripard1-0/+33
The A13 has 3 SPI controllers compatible with the one found in the A10. Add them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun5i: Add A10s SPI controller nodesMaxime Ripard1-0/+33
The A10s has 3 SPI controllers compatible with the one found in the A10. Add them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun4i: Add A10 SPI controller nodesMaxime Ripard1-0/+44
The A10 has 4 SPI controllers that are now supported. Add them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-24ARM: dt: sun7i: Add A20 SPI controller nodesMaxime Ripard1-0/+44
The A20 has 4 SPI controllers compatible with the one found in the A10. Add them in the DT. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-23ARM: sun4i: dt: Remove grouping + simple-bus compatible for regulatorsHans de Goede2-24/+16
According to Documentation/devicetree/bindings/regulator/regulator.txt regulator nodes should not be placed under 'simple-bus'. Mark Rutland also explains about it at: http://www.spinics.net/lists/linux-usb/msg101497.html Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sunxi: dt: Convert to the new clock compatiblesMaxime Ripard5-110/+110
Switch the device tree to the new compatibles introduced in the clock drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sun7i: add arch timer nodeMarc Zyngier1-0/+8
The Allwinner A20 SoC is built around a pair of Cortex-A7 cores, which have the usual generic timers. Report this in the DT. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sun7i: dt: Add bindings for USB clocksRoman Byshko1-0/+9
Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sun5i: dt: Add bindings for USB clocksRoman Byshko2-0/+18
Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-18ARM: sun4i: dt: Add bindings for USB clocksRoman Byshko1-0/+9
Signed-off-by: Roman Byshko <rbyshko@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: Add ethernet alias for GMACChen-Yu Tsai1-1/+1
All Allwinner A20 boards we support can only use either EMAC or GMAC, as they share the same pins. As we have switched all supported to GMAC, we should alias GMAC (the active controller) as ethernet0, so u-boot will insert the MAC address for the correct controller. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: a20-olinuxino-micro: Enable GMAC instead of EMACChen-Yu Tsai1-15/+12
GMAC has better performance and fewer hardware issues. Use the GMAC in MII mode for ethernet instead of the EMAC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: cubieboard2: Enable GMAC instead of EMACChen-Yu Tsai1-15/+12
GMAC has better performance and fewer hardware issues. Use the GMAC in MII mode for ethernet instead of the EMAC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: cubietruck: Enable the GMACChen-Yu Tsai1-0/+12
The CubieTruck uses the GMAC with an RGMII phy. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: Add pin muxing options for the GMACChen-Yu Tsai1-0/+26
The A20 has EMAC and GMAC muxed on the same pins. Add pin sets with gmac function for MII and RGMII mode to the DTSI. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: Add GMAC controller node to sun7i DTSIChen-Yu Tsai1-0/+15
Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-10ARM: dts: sun7i: Add GMAC clock node to sun7i DTSIChen-Yu Tsai1-0/+28
The GMAC uses 1 of 2 sources for its transmit clock, depending on the PHY interface mode. Add both sources as dummy clocks, and as parents to the GMAC clock node. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: dts: sun7i: rename clock node names to clk@NChen-Yu Tsai1-8/+17
Device tree naming conventions state that node names should match node function. Change fully functioning clock nodes to match and add clock-output-names to all sunxi clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: dts: sun6i: rename clock node names to clk@NChen-Yu Tsai1-5/+14
Device tree naming conventions state that node names should match node function. Change fully functioning clock nodes to match and add clock-output-names to all sunxi clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: dts: sun5i: rename clock node names to clk@NChen-Yu Tsai2-20/+40
Device tree naming conventions state that node names should match node function. Change fully functioning clock nodes to match and add clock-output-names to all sunxi clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: dts: sun4i: rename clock node names to clk@NChen-Yu Tsai1-10/+20
Device tree naming conventions state that node names should match node function. Change fully functioning clock nodes to match and add clock-output-names to all sunxi clock nodes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: sun6i: dt: Add SPI controllers to the A31 DTSIMaxime Ripard1-0/+40
The A31 has 4 SPI controllers. Add them in the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-07ARM: sun6i: dt: Add PLL6 and SPI module clocksMaxime Ripard1-9/+37
The module clocks in the A31 are still compatible with the A10 one. Add the SPI module clocks and the PLL6 in the device tree to allow their use by the SPI controllers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-03ARM: sun5i: a13: Add missing serial aliasesMaxime Ripard1-0/+5
Some UART aliases have been defined, but not all of them. Add the remaining ones to be consistent and to ease the parsing of the DT by the bootloaders. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-03ARM: dts: sun7i: add pin muxing options for UART2Chen-Yu Tsai1-0/+7
UART2 is used on CubieTruck to connect to the Bluetooth module. Add the pin set used in this case. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-02-03ARM: sun4i: dt: Add basic board support for LinkSprite pcDuinoZoltan HERPAI2-0/+49
This patch will add a basic board support DT for the LinkSprite pcDuino board. Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 07:31:57 +0300