summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-19Merge tag 'imx-fixes-3.16-2' of ↵Olof Johansson1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes Merge "ARM: imx: fixes for 3.16, 2nd take" from Shawn Guo: The i.MX fixes for 3.16, 2nd take: It fixes a hard machine hang regression for boards where only pcie is active but no sata, as the latest imx6-pcie driver is no longer enabling the upstream clock directly but only lvds clk out. * tag 'imx-fixes-3.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: clk-imx6q: parent lvds_sel input from upstream clock gates Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson2-3/+3
Merge "at91: fixes for 3.16 #2" from Nicolas Ferre: Second AT91 fixes series for 3.16 - fix clock definitions after the move to CCF for: * at91sam9n12 (ohci) * at91sam9x5 (ohci, pwm) * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsi ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsi ARM: at91: at91sam9x5: correct typo error for ohci clock Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson3-7/+18
Merge "mvebu fixes for v3.16 (round 3)" from Jason Cooper: - Fix SMP boot on 38x/375 in big endian - Fix operand list for pmsu on 370/XP - Fix coherency bus notifiers * tag 'mvebu-fixes-3.16-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Fix coherency bus notifiers by using separate notifiers ARM: mvebu: Fix the operand list in the inline asm of armada_370_xp_pmsu_idle_enter ARM: mvebu: fix SMP boot for Armada 38x and Armada 375 Z1 in big endian Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19ARM: dts: sun6i: Add Merrii A31 Hummingbird supportMaxime Ripard2-0/+120
This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2014-07-19ARM: dts: sun6i: Add ethernet alias for GMACChen-Yu Tsai1-0/+1
Alias GMAC as ethernet0 so U-boot can fill in the MAC address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller nodeChen-Yu Tsai1-0/+17
The A31 has the same GMAC found on the A20 SoC, except it has an extra reset control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add GMAC clock node to the A31 dtsiChen-Yu Tsai1-0/+28
The GMAC uses 1 of 2 sources for its transmit clock, depending on the PHY interface mode. Add both sources as dummy clocks, and as parents to the GMAC clock node. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add pin muxing options for GMACChen-Yu Tsai1-0/+42
The A31 SoC has a GMAC gigabit ethernet controller supporting MII, GMII, RGMII modes. Add pin muxing options for these modes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-18ARM: dts: Add I2S dt node for exynos3250Tomasz Figa1-0/+13
This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo (1 channels) IIS-bus for audio interface with DMA-based operation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Tested-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-piDoug Anderson2-0/+290
This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi, including: * The keyboard * The i2c tunnel * The tps65090 under the i2c tunnel * The battery under the i2c tunnel To add extra motivation, it should be noted that tps65090 is one of the things needed to get display-related FETs turned on for pit and pi. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: dts: clean up arm-pmu node for exynos4Chanho Park4-12/+10
This patch cleans a arm-pmu node up for exynos4. Only exynos4412 series boards have four pmu interrupts. Rest of exynos4 boards, except 4412, have only two pmu interrupts. Thus, we can define two interrupts in the exynos4.dtsi and extends the interrupts only exynos4412.dtsi. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18Merge tag 'gfs2-fixes' of ↵Linus Torvalds5-13/+17
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes Pull gfs2 fixes from Steven Whitehouse: "This patch set contains two minor docs/spelling fixes, some fixes for flock, a change to use GFP_NOFS to avoid recursion on a rarely used code path and a fix for a race relating to the glock lru" * tag 'gfs2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-fixes: GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixes GFS2: memcontrol: Spelling s/invlidate/invalidate/ GFS2: Allow caching of glocks for flock GFS2: Allow flocks to use normal glock dq rather than dq_wait GFS2: replace count*size kzalloc by kcalloc GFS2: Use GFP_NOFS when allocating glocks GFS2: Fix race in glock lru glock disposal GFS2: Only wait for demote when last holder is dequeued
2014-07-18Merge tag 'dm-3.16-fixes-2' of ↵Linus Torvalds2-0/+18
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: "Fix the dm-thinp and dm-cache targets to disallow changing the data device's block size" * tag 'dm-3.16-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache metadata: do not allow the data block size to change dm thin metadata: do not allow the data block size to change
2014-07-18Merge tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifsLinus Torvalds1-2/+2
Pull UBI fixes from Artem Bityutskiy: "Two UBI fastmap-related fixes for v3.16: - fix UBI fastmap support which we broke in 3.16-rc1 by reversing the volumes RB-tree sorting criteria. - make sure that we scrub all PEBs where we see bit-flips - we were missing some of them when the fastmap feature was enabled" * tag 'upstream-3.16-rc6' of git://git.infradead.org/linux-ubifs: UBI: fastmap: do not miss bit-flips UBI: fix the volumes tree sorting criteria
2014-07-18Merge tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfsLinus Torvalds7-72/+106
Pull xfs fixes from Dave Chinner: "Fixes for low memory perforamnce regressions and a quota inode handling regression. These are regression fixes for issues recently introduced - the change in the stack switch location is fairly important, so I've held off sending this update until I was sure that it still addresses the stack usage problem the original solved. So while the commits in the xfs tree are recent, it has been under tested for several weeks now" * tag 'xfs-for-linus-3.16-rc5' of git://oss.sgi.com/xfs/xfs: xfs: null unused quota inodes when quota is on xfs: refine the allocation stack switch Revert "xfs: block allocation work needs to be kswapd aware"
2014-07-18ARM: at91/dt: add missing clocks property to pwm node in sam9x5.dtsiBoris BREZILLON1-0/+1
The pwm driver requires a clocks property referencing the pwm peripheral clk. Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91/dt: fix usb0 clocks definition in sam9n12 dtsiBoris BREZILLON1-1/+1
udphs_clk (USB Device Controller clock) is referenced instead of uhphs_clk (USB Host Controller clock). Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18ARM: at91: at91sam9x5: correct typo error for ohci clockBo Shen1-2/+1
Correct the typo error for the second "uhphs_clk". Signed-off-by: Bo Shen <voice.shen@atmel.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-07-18irqchip: gic: Fix core ID calculation when topology is read from DTTomasz Figa1-1/+4
Certain GIC implementation, namely those found on earlier, single cluster, Exynos SoCs, have registers mapped without per-CPU banking, which means that the driver needs to use different offset for each CPU. Currently the driver calculates the offset by multiplying value returned by cpu_logical_map() by CPU offset parsed from DT. This is correct when CPU topology is not specified in DT and aforementioned function returns core ID alone. However when DT contains CPU topology, the function changes to return cluster ID as well, which is non-zero on mentioned SoCs and so breaks the calculation in GIC driver. This patch fixes this by masking out cluster ID in CPU offset calculation so that only core ID is considered. Multi-cluster Exynos SoCs already have banked GIC implementations, so this simple fix should be enough. Reported-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reported-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tomasz Figa <t.figa@samsung.com> Fixes: db0d4db22a78d ("ARM: gic: allow GIC to support non-banked setups") Cc: <stable@vger.kernel.org> # v3.3+ Link: https://lkml.kernel.org/r/1405610624-18722-1-git-send-email-t.figa@samsung.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-18GFS2: fs/gfs2/rgrp.c: kernel-doc warning fixesFabian Frederick1-2/+2
Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: memcontrol: Spelling s/invlidate/invalidate/Geert Uytterhoeven1-2/+2
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: cluster-devel@redhat.com Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Allow caching of glocks for flockBob Peterson1-1/+1
This patch removes the GLF_NOCACHE flag from the glocks associated with flocks. There should be no good reason not to cache glocks for flocks: they only force the glock to be demoted before they can be reacquired, which can slow down performance and even cause glock hangs, especially in cases where the flocks are held in Shared (SH) mode. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Allow flocks to use normal glock dq rather than dq_waitBob Peterson2-4/+2
This patch allows flock glocks to use a non-blocking dequeue rather than dq_wait. It also reverts the previous patch I had posted regarding dq_wait. The reverted patch isn't necessarily a bad idea, but I decided this might avoid unforeseen side effects, and was therefore safer. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: replace count*size kzalloc by kcallocFabian Frederick1-2/+2
kcalloc manages count*sizeof overflow. Cc: cluster-devel@redhat.com Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Use GFP_NOFS when allocating glocksSteven Whitehouse1-2/+2
Normally GFP_KERNEL is ok here, but there is now a rarely used code path relating to deallocation of unlinked inodes (in certain corner cases) which if hit at times of memory shortage can cause recursion while trying to free memory. One solution would be to try and move the gfs2_glock_get() call so that it is no longer called while another glock is held, but that doesn't look at all easy, so GFP_NOFS is the best solution for the time being. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Fix race in glock lru glock disposalSteven Whitehouse1-3/+7
We must not leave items on the LRU list with GLF_LOCK set, since they can be removed if the glock is brought back into use, which may then potentially result in a hang, waiting for GLF_LOCK to clear. It doesn't happen very often, since it requires a glock that has not been used for a long time to be brought back into use at the same moment that the shrinker is part way through disposing of glocks. The fix is to set GLF_LOCK at a later time, when we already know that the other locks can be obtained. Also, we now only release the lru_lock in case a resched is needed, rather than on every iteration. Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18GFS2: Only wait for demote when last holder is dequeuedBob Peterson1-1/+3
Function gfs2_glock_dq_wait is supposed to dequeue a glock and then wait for the lock to be demoted. The problem is, if this is a shared lock, its demote will depend on the other holders, which means you might end up waiting forever because the other process is blocked. This problem is especially apparent when dealing with nested flocks. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-07-18ARM: zynq: DT: Migrate UART to Cadence bindingSoren Brinkmann1-4/+4
The Zynq UART is Cadence IP and the driver has been renamed accordingly. Migrate the DT to use the new binding for the UART driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-18tty: cadence: Document DT bindingSoren Brinkmann1-0/+20
Add binding documentation for the Cadence UART. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-18ARM: dts: vf610: add FlexCAN nodeStefan Agner1-0/+23
Add FlexCAN node for the two FlexCAN IP instances in Vybrid. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: add initial Rex Basic board supportRobert Nelson2-0/+31
Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: add initial Rex Pro board supportRobert Nelson3-0/+392
Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: mx5: Split M53EVK into SoM and EVK partsMarek Vasut2-108/+144
This patch splits the M53EVK device tree file into a common SoM part and an EVK part. This is needed to make it easier for users of the SoM to put it into different, non-reference baseboard. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: RIoTboard explicitly define pad settingsIain Paton1-16/+16
Instead of relying on defaults or bootloader settings, explicitly define all pad settings. This resolves reported issues of no analogue audio output. Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: vf610: fix length of eshdc1 register propertyStefan Agner1-1/+1
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.George Joseph8-23/+135
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx53: correct clock-names of SATA nodeShawn Guo1-1/+1
Per the binding doc imx-sata.txt, the first entry of clock-names should be "sata" than anything else. Correct it for imx53 SATA node. It works for now only because SATA driver gets clock by index so far. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx6: Align ssi nodes between mx6 variantsFabio Estevam3-15/+9
Since commit 98ea6ad2edd2 (ARM: dts: imx6: use imx51-ssi) the mx6 ssi is compatible with imx51, so align all the mx6 variant ssi compatible strings as: compatible = "fsl,<imx6-soc>-ssi", "fsl,imx51-ssi"; Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX27 clk: dts: Use clock defines in DTS filesAlexander Shiyan4-44/+77
Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sxShawn Guo2-2/+2
The SDMA on imx6sl and imx6sx is more compatible with imx6q one than imx35. Let's use "fsl,imx6q-sdma" instead of "fsl,imx35-sdma", so that SDMA ROM script on imx6sl and imx6sx can work for audio driver just like the case of imx6q. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Robin Gong <yibin.gong@freescale.com>
2014-07-18ARM: dts: imx6sx-sdb: Add audio supportFabio Estevam1-0/+72
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sx: Pass the fsl,fifo-depth propertyFabio Estevam1-0/+3
Like the other mx6 variants, we need to pass fsl,fifo-depth property in dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sx: Fix sdma nodeFabio Estevam1-1/+3
Use the correct compatible string for sdma and also provide the sdma firmware path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add can busSilvio Fricke1-0/+13
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add two other i2c busesSilvio Fricke1-0/+28
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add PCIe supportSilvio Fricke1-0/+13
Add support for the PCI express bus available on MX6 Data Modul edm-qmx6 board. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx25-pdk: Add USB OTG supportFabio Estevam1-0/+7
Tested by loading the g_ether module and doing a ping between mx25pdk and the host PC via USB. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: i.MX53: add aipstz nodesSteffen Trumtrar1-0/+10
The AHB to IP bridges (AIPSTZ) allow fine grained access rights management. Add both bridges to the DT. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: mxs: Split M28EVK into SoM and EVK partsMarek Vasut2-61/+88
This patch splits the M28EVK device tree file into a common SoM part and an EVK part. This is needed to make it easier for users of the SoM to put it into different, non-reference baseboard. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: i.MX25: Fix gpt timers clocks.Denis Carikli1-4/+4
Without that fix, the board freeze during boot. This appeared after the following commit: 496f065 ARM: i.MX: Use of_clk_get_by_name() for timer clocks for DT case. Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 19:28:14 +0300