summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-27Merge tag 'usb-serial-6.6-rc1' of ↵Greg Kroah-Hartman2-1/+95
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB-serial updates for 6.6-rc1 Here are the USB-serial updates for 6.6-rc1, including: - support for the RS485 mode of XR devices - new modem device ids All have been in linux-next with no reported issues. * tag 'usb-serial-6.6-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add FOXCONN T99W368/T99W373 product USB: serial: option: add Quectel EM05G variant (0x030e) USB: serial: xr: add TIOCGRS485 and TIOCSRS485 ioctls
2023-08-26platform/chrome: cros_ec_typec: Configure Retimer cable typeUtkarsh Patel1-1/+27
Connector class driver only configure cable type active or passive. Configure if the cable type is retimer or redriver with this change. This detail will be provided as a part of cable discover mode VDO. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Acked-by: Prashant Malani <pmalani@chromium.org> Link: https://lore.kernel.org/r/20230718024703.1013367-2-utkarsh.h.patel@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23tcpm: Avoid soft reset when partner does not support get_statusBadhri Jagan Sridharan1-0/+7
When partner does not support get_status message, tcpm right now responds with soft reset message. This causes PD renegotiation to happen and resets PPS link. Avoid soft resetting the link when partner does not support get_status message to mitigate PPS resets. [ 208.926752] Setting voltage/current limit 9500 mV 2450 mA [ 208.930407] set_auto_vbus_discharge_threshold mode:3 pps_active:y vbus:9500 ret:0 [ 208.930418] state change SNK_TRANSITION_SINK -> SNK_READY [rev3 POWER_NEGOTIATION] [ 208.930455] AMS POWER_NEGOTIATION finished // ALERT message from the Source [ 213.948442] PD RX, header: 0x19a6 [1] [ 213.948451] state change SNK_READY -> GET_STATUS_SEND [rev3 GETTING_SOURCE_SINK_STATUS] [ 213.948457] PD TX, header: 0x492 [ 213.950402] PD TX complete, status: 0 [ 213.950427] pending state change GET_STATUS_SEND -> GET_STATUS_SEND_TIMEOUT @ 60 ms [rev3 GETTING_SOURCE_SINK_STATUS] // NOT_SUPPORTED from the Source [ 213.959954] PD RX, header: 0xbb0 [1] // sink sends SOFT_RESET [ 213.959958] state change GET_STATUS_SEND -> SNK_SOFT_RESET [rev3 GETTING_SOURCE_SINK_STATUS] [ 213.959962] AMS GETTING_SOURCE_SINK_STATUS finished [ 213.959964] AMS SOFT_RESET_AMS start [ 213.959966] state change SNK_SOFT_RESET -> AMS_START [rev3 SOFT_RESET_AMS] [ 213.959969] state change AMS_START -> SOFT_RESET_SEND [rev3 SOFT_RESET_AMS] Cc: stable@vger.kernel.org Fixes: 8dea75e11380 ("usb: typec: tcpm: Protocol Error handling") Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230820044449.1005889-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23usb: typec: tcpm: reset counter when enter into unattached state after try roleXu Yang1-0/+3
The try_src_count and try_snk_count may still be 1 after enter into unattached state. This may be caused by below case: - SNK_TRY->SNK_TRY_WAIT->SRC_TRYWAIT->SNK_UNATTACHED - SRC_TRY->SRC_TRY_WAIT->SNK_TRYWAIT->SNK_UNATTACHED The port->attached is not true at the end and tcpm_reset_port() will not be called. This will reset counter into for these cases, otherwise the tcpm won't try role when new cable attached. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230820151518.1403006-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23usb: typec: tcpm: set initial svdm version based on pd revisionRD Babiera1-4/+31
When sending Discover Identity messages to a Port Partner that uses Power Delivery v2 and SVDM v1, we currently send PD v2 messages with SVDM v2.0, expecting the port partner to respond with its highest supported SVDM version as stated in Section 6.4.4.2.3 in the Power Delivery v3 specification. However, sending SVDM v2 to some Power Delivery v2 port partners results in a NAK whereas sending SVDM v1 does not. NAK messages can be handled by the initiator (PD v3 section 6.4.4.2.5.1), and one solution could be to resend Discover Identity on a lower SVDM version if possible. But, Section 6.4.4.3 of PD v2 states that "A NAK response Should be taken as an indication not to retry that particular Command." Instead, we can set the SVDM version to the maximum one supported by the negotiated PD revision. When operating in PD v2, this obeys Section 6.4.4.2.3, which states the SVDM field "Shall be set to zero to indicate Version 1.0." In PD v3, the SVDM field "Shall be set to 01b to indicate Version 2.0." Fixes: c34e85fa69b9 ("usb: typec: tcpm: Send DISCOVER_IDENTITY from dedicated work") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20230731165926.1815338-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-23USB: serial: option: add FOXCONN T99W368/T99W373 productSlark Xiao1-0/+4
The difference of T99W368 and T99W373 is the chip solution. T99W368 is designed based on Qualcomm SDX65 and T99W373 is SDX62. Test evidence as below: T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 7 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0f0 Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8c4 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=01 Lev=02 Prnt=05 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e0ee Rev=05.04 S: Manufacturer=FII S: Product=OLYMPIC USB WWAN Adapter S: SerialNumber=78ada8d5 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Both of them share the same port configuration: 0&1: MBIM, 2: Modem, 3:GNSS, 4:NMEA, 5:Diag GNSS port don't use serial driver. Signed-off-by: Slark Xiao <slark_xiao@163.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-08-23USB: serial: option: add Quectel EM05G variant (0x030e)Martin Kohn1-0/+3
Add Quectel EM05G with product ID 0x030e. Interface 4 is used for qmi. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030e Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Martin Kohn <m.kohn@welotec.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org>
2023-08-22usb: dwc2: add pci_device_id driver_data parse supportYinbo Zhu3-14/+40
The dwc2 driver has everything we need to run in PCI mode except for pci_device_id driver_data parse. With that to set Loongson dwc2 element and added identified as PCI_VENDOR_ID_LOONGSON and PCI_DEVICE_ID_LOONGSON_DWC2 in dwc2_pci_ids, the Loongson dwc2 controller will work. Signed-off-by: Yinbo Zhu <zhuyinbo@loongson.cn> Link: https://lore.kernel.org/r/20230815065833.3375-1-zhuyinbo@loongson.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: remove max support speed info in bind operationLinyu Yuan10-29/+10
Take ecm_bind() for example, it call gadget_is_{*}speed() API to show gadget max support speed, it is not much help, remove the API usage here is safe. Similar change apply to acm,eem,loopback,ncm,obex,rndis,serial, sourcesink,subset functions. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-8-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: composite: cleanup function config_ep_by_speed_and_alt()Linyu Yuan1-20/+14
When call this function, gadget already have working speed, if it is USB_SPEED_SUPER_PLUS, in theroy gadget_is_superspeed_plus() checking should be true, so there is no need to call it. it is same for other working speed. Remove all gadget_is_{*}speed_plus() API call to clean it up. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-7-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: config: remove max speed check in usb_assign_descriptors()Linyu Yuan1-5/+3
usb_assign_descriptors() usally called inside function bind operation, and gadget still have no working connection speed, let's support all speed at this point, it may possible allocate extra memory to store descriptors, but it is small and acceptable. Remove gadget_is_{*}speed() API checking to allow support all speed. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-6-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: unconditionally allocate hs/ss descriptor in bind operationLinyu Yuan3-75/+51
Take f_midi_bind() for example, when composite layer call it, it will allocate hs descriptor by calling gadget_is_dualspeed() API to check gadget max support speed capability, but most other gadget function didn't do like this. To follow other function drivers, it is safe to remove the check which mean support all possible link speed by default in function driver. Similar change apply to midi2 and uvc. Also in midi and midi2, as there is no descriptor difference between super speed and super speed plus, follow other gadget function drivers, do not allocate descriptor for super speed plus, composite layer will handle it properly. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-5-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: f_uvc: change endpoint allocation in uvc_function_bind()Linyu Yuan1-9/+1
when call uvc_function_bind(), gadget still have no connection speed, just follow other gadget function, use fs endpoint descriptor to allocate a video endpoint, remove gadget_is_{super|dual}speed() API call. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-4-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: add a inline function gether_bitrate()Linyu Yuan4-44/+18
In function ecm_bitrate(), it is not support report bit rate for super speed plus mode, but it can use same bit rate value defined in ncm and rndis. Add a common inline function gether_bitrate() which report different for all possible speeds, it can be used by ecm, ncm and rndis, also remove old function from them. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-3-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: use working speed to calcaulate network bitrate and qlenLinyu Yuan4-11/+10
Take ecm_bitrate() as example, it will be called after gadget device link speed negotiation, consider code if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER), if a gadget device link speed is USB_SPEED_SUPER, gadget_is_superspeed(g) must be true, or not it is a wrong configuration of gadget max support speed. Remove gadget_is_superspeed(g) checking should be safe, and remove other similar operation in ncm, rndis, u_ether. Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/20230803091053.9714-2-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22dt-bindings: usb: samsung,exynos-dwc3: Add Exynos850 supportSam Protsenko1-0/+16
Exynos850 has dwc3 compatible USB controller, so it can reuse existing dwc3 glue layer. Document a new compatible for Exynos850 and its clocks. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-2-semen.protsenko@linaro.org Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: dwc3: exynos: Add support for Exynos850 variantSam Protsenko1-0/+9
Add Exynos850 compatible string and associated driver data. Only two clocks are needed for this SoC: - bus_early: bus clock needed for registers access - ref: USB 2.0 DRD reference clock (50 MHz) Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230819031731.22618-4-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: udc-xilinx: fix incorrect type in assignment warningPiyush Mehta1-1/+1
The bitwise attribute is used by the sparse utility to make sure the variable is converted to the local processor type before other (unsafe) operations are performed on the variable. Fix the below sparse warnings type casted with __le16: warning: incorrect type in assignment (different base types) expected unsigned short [usertype] got restricted __le16 [usertype] Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/ Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230822063201.16929-4-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: udc-xilinx: fix cast from restricted __le16 warningPiyush Mehta1-3/+3
usb_ctrlrequest member wValue, wLength and wIndex are of type __le16, conversion macro cpu_to_le16() input argument is __u16, so properly typecasted to fix the cast from restricted __le16 warning. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/ Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230822063201.16929-3-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: udc-xilinx: fix restricted __le16 degrades to integer warningPiyush Mehta1-8/+10
usb_ctrlrequest members wValue and wIndex are of type __le16, so to fix this warnings we are using le16_to_cpu() macros. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/all/202209020044.CX2PfZzM-lkp@intel.com/ Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20230822063201.16929-2-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22USB: dwc2: hande irq on dead controller correctlyOliver Neukum1-1/+3
If the controller is dead, the honest answer to the question whether it has caused an irq is: unknown As the purpose of the irq return is to trigger switching off an IRQ, the correct response if you cannot determine if your device has caused the interrupt is IRQ_HANDLED Signed-off-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/20230822112455.18957-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22USB: cdc-acm: support flushing write buffers (TCOFLUSH)Simon Arlott1-0/+14
If the serial device never reads data written to it (because it is "output only") then the write buffers will still be waiting for the URB to complete on close(), which will hang for 30s until the closing_wait timeout expires. This can happen with the ESP32-H2/ESP32-C6 USB serial interface. Changing the port closing_wait timeout is a privileged operation but flushing the output buffer is not a privileged operation. Implement the flush_buffer tty operation to cancel in-progress writes so that tcflush(fd, TCOFLUSH) can be used to unblock the serial port before close. Signed-off-by: Simon Arlott <simon@octiron.net> Link: https://lore.kernel.org/r/555fbc4c-043b-8932-fb9b-a208d61ffbe4@0882a8b5-c6c3-11e9-b005-00805fc181fe.uuid.home.arpa Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: typec: qcom-pmic-typec: register drm_bridgeDmitry Baryshkov2-0/+38
The current approach to handling DP on bridge-enabled platforms requires a chain of DP bridges up to the USB-C connector. Register a last DRM bridge for such chain. Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230817150824.14371-3-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: typec: altmodes/displayport: add support for embedded DP casesDmitry Baryshkov1-1/+4
In the embedded cases, the DisplayPort connector is handled by the TCPM itself. It was proposed to add the "displayport" OF property to the DT bindings, but it was rejected in favour of properly describing the electrical signal path using of_graph. Fallback to the controller fwnode for HPD notifications to support such usecases without requiring additional DT properties. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230817150824.14371-2-dmitry.baryshkov@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: gadget: function: Remove unused declarationsYue Haibing3-7/+0
These declarations are not implemented anymore, remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230818124025.51576-1-yuehaibing@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: dwc3: remove unnecessary platform_set_drvdata()Yang Yingliang4-6/+0
Remove unnecessary platform_set_drvdata(..., NULL) in ->remove(), the driver_data will be cleared in device_unbind_cleanup() after calling ->remove() in driver call code. Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/20230810134710.114356-1-yangyingliang@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: cdc-acm: move ldisc dcd notification outside of acm's read lockDan Drown1-10/+11
dcd_change notification call moved outside of the acm->read_lock to protect any future tty ldisc that calls wait_serial_change() Signed-off-by: Dan Drown <dan-netdev@drown.org> Acked-by: Oliver Neukum <oneukum@suse.com> Link: https://lore.kernel.org/r/ZN1zV/zjPgpGlHXo@vps3.drown.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: typec: tcpci: clear the fault status bitMarco Felsch2-0/+5
According the "USB Type-C Port Controller Interface Specification v2.0" the TCPC sets the fault status register bit-7 (AllRegistersResetToDefault) once the registers have been reset to their default values. This triggers an alert(-irq) on PTN5110 devices albeit we do mask the fault-irq, which may cause a kernel hang. Fix this generically by writing a one to the corresponding bit-7. Cc: stable@vger.kernel.org Fixes: 74e656d6b055 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca> Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/ Reported-by: Christian Bach <christian.bach@scs.ch> Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/ Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: typec: bus: verify partner exists in typec_altmode_attentionRD Babiera3-4/+13
Some usb hubs will negotiate DisplayPort Alt mode with the device but will then negotiate a data role swap after entering the alt mode. The data role swap causes the device to unregister all alt modes, however the usb hub will still send Attention messages even after failing to reregister the Alt Mode. type_altmode_attention currently does not verify whether or not a device's altmode partner exists, which results in a NULL pointer error when dereferencing the typec_altmode and typec_altmode_ops belonging to the altmode partner. Verify the presence of a device's altmode partner before sending the Attention message to the Alt Mode driver. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: stable@vger.kernel.org Signed-off-by: RD Babiera <rdbabiera@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230814180559.923475-1-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: core: Use module_led_trigger macro to simplify the codeLi Zetao1-12/+1
Use the module_led_trigger macro to simplify the code, which is the same as declaring with module_init() and module_exit(). Signed-off-by: Li Zetao <lizetao1@huawei.com> Link: https://lore.kernel.org/r/20230815074648.1015175-1-lizetao1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22usb: dwc3: meson-g12a: do post init to fix broken usb after resumptionLuke Lu1-0/+6
Device connected to usb otg port of GXL-based boards can not be recognised after resumption, doesn't recover even if disconnect and reconnect the device. dmesg shows it disconnects during resumption. [ 41.492911] usb 1-2: USB disconnect, device number 3 [ 41.499346] usb 1-2: unregistering device [ 41.511939] usb 1-2: unregistering interface 1-2:1.0 Calling usb_post_init() will fix this issue, and it's tested and verified on libretech's aml-s905x-cc board. Cc: stable@vger.kernel.org # v5.8+ Fixes: c99993376f72 ("usb: dwc3: Add Amlogic G12A DWC3 glue") Signed-off-by: Luke Lu <luke.lu@libre.computer> Acked-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20230809212911.18903-1-luke.lu@libre.computer Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22dt-bindings: usb: samsung,exynos-dwc3: Fix Exynos5433 compatibleSam Protsenko1-1/+1
The correct compatible for Exynos5433 is "samsung,exynos5433-dwusb3". Fix the typo in its usage. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Fixes: 949ea75b7ba4 ("dt-bindings: usb: samsung,exynos-dwc3: convert to dtschema") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230816201123.3530-1-semen.protsenko@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22dt-bindings: usb: samsung,exynos-dwc3: fix order of clocks on Exynos5433Krzysztof Kozlowski1-1/+1
The Exynos5433 DTSI had always different order of DWC USB3 controller clocks than the binding. The order in the binding was introduced in the commit 949ea75b7ba4 ("dt-bindings: usb: samsung,exynos-dwc3: convert to dtschema") converting to DT schema. The Linux driver does not care about order and was always getting clocks by name. Therefore assume the DTS is the preferred order and correct the binding. Fixes: 949ea75b7ba4 ("dt-bindings: usb: samsung,exynos-dwc3: convert to dtschema") Cc: Sam Protsenko <semen.protsenko@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org> Link: https://lore.kernel.org/r/20230818102911.18388-1-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-22Merge tag 'thunderbolt-for-v6.6-rc1' of ↵Greg Kroah-Hartman6-71/+90
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-next Mika writes: thunderbolt: Changes for v6.6 merge window This includes following Thunderbolt/USB4 changes for the v6.6 merge window: - Replace broken mailing list address in the ABI document - Small improvements. All these have been in linux-next with no reported issues. * tag 'thunderbolt-for-v6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: Documentation/ABI: thunderbolt: Replace 01.org in contact thunderbolt: Check Intel vendor ID in tb_switch_get_generation() thunderbolt: Log a warning if device links are not found thunderbolt: Set variable tmu_params storage class specifier to static
2023-08-14Merge 6.5-rc6 into usb-nextGreg Kroah-Hartman606-2924/+6079
We need the USB and Thunderbolt fixes in here to build on. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-08-13Linux 6.5-rc6Linus Torvalds1-1/+1
2023-08-13Merge tag 'kbuild-fixes-v6.5-2' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Clear errno before calling getline() - Fix a modpost warning for ARCH=alpha * tag 'kbuild-fixes-v6.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: alpha: remove __init annotation from exported page_is_ram() scripts/kallsyms: Fix build failure by setting errno before calling getline()
2023-08-13Merge tag 'platform-drivers-x86-v6.5-4' of ↵Linus Torvalds7-24/+64
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform drivers fixes from Hans de Goede: - lenovo-ymc driver causes keyboard + touchpad to not work with >= 6.4 on some Thinkbook models, fix this - A set of small fixes for mlx-platform - Other small fixes and hw-id additions * tag 'platform-drivers-x86-v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI chassis-type platform: mellanox: Change register offset addresses platform: mellanox: mlx-platform: Modify graceful shutdown callback and power down mask platform: mellanox: mlx-platform: Fix signals polarity and latch mask platform: mellanox: Fix order in exit flow platform/x86: ISST: Reduce noise for missing numa information in logs platform/x86: msi-ec: Fix the build ACPI: scan: Create platform device for CS35L56 platform/x86/amd/pmf: Fix unsigned comparison with less than zero
2023-08-13Merge tag 'scsi-fixes' of ↵Linus Torvalds11-41/+68
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eleven small fixes, ten in drivers. Of the two fixes marked core, one is in the raid helper class (used by some raid device drivers) and the other one is the /proc/scsi/scsi parsing fix for potential reads beyond the end of the buffer" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qedf: Fix firmware halt over suspend and resume scsi: qedi: Fix firmware halt over suspend and resume scsi: qedi: Fix potential deadlock on &qedi_percpu->p_work_lock scsi: lpfc: Remove reftag check in DIF paths scsi: ufs: renesas: Fix private allocation scsi: snic: Fix possible memory leak if device_add() fails scsi: core: Fix possible memory leak if device_add() fails scsi: core: Fix legacy /proc parsing buffer overflow scsi: 53c700: Check that command slot is not NULL scsi: fnic: Replace return codes in fnic_clean_pending_aborts() scsi: storvsc: Fix handling of virtual Fibre Channel timeouts
2023-08-13platform/x86: lenovo-ymc: Only bind on machines with a convertible DMI ↵Hans de Goede1-0/+25
chassis-type The lenovo-ymc driver is causing the keyboard + touchpad to stop working on some regular laptop models such as the Lenovo ThinkBook 13s G2 ITL 20V9. The problem is that there are YMC WMI GUID methods in the ACPI tables of these laptops, despite them not being Yogas and lenovo-ymc loading causes libinput to see a SW_TABLET_MODE switch with state 1. This in turn causes libinput to ignore events from the builtin keyboard and touchpad, since it filters those out for a Yoga in tablet mode. Similar issues with false-positive SW_TABLET_MODE=1 reporting have been seen with the intel-hid driver. Copy the intel-hid driver approach to fix this and only bind to the WMI device on machines where the DMI chassis-type indicates the machine is a convertible. Add a 'force' module parameter to allow overriding the chassis-type check so that users can easily test if the YMC interface works on models which report an unexpected chassis-type. Fixes: e82882cdd241 ("platform/x86: Add driver for Yoga Tablet Mode switch") Link: https://bugzilla.redhat.com/show_bug.cgi?id=2229373 Cc: André Apitzsch <git@apitzsch.eu> Cc: stable@vger.kernel.org Tested-by: Andrew Kallmeyer <kallmeyeras@gmail.com> Tested-by: Gergő Köteles <soyer@irl.hu> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20230812144818.383230-1-hdegoede@redhat.com
2023-08-13platform: mellanox: Change register offset addressesVadim Pasternak1-4/+4
Move debug register offsets to different location due to hardware changes. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-5-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: mlx-platform: Modify graceful shutdown callback and ↵Vadim Pasternak1-2/+2
power down mask Use kernel_power_off() instead of kernel_halt() to pass through machine_power_off() -> pm_power_off(), otherwise axillary power does not go off. Change "power down" bitmask. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-4-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: mlx-platform: Fix signals polarity and latch maskVadim Pasternak1-4/+4
Change polarity of chassis health and power signals and fix latch reset mask for L1 switch. Fixes: dd635e33b5c9 ("platform: mellanox: Introduce support of new Nvidia L1 switch") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-3-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-13platform: mellanox: Fix order in exit flowVadim Pasternak1-2/+1
Fix exit flow order: call mlxplat_post_exit() after mlxplat_i2c_main_exit() in order to unregister main i2c driver before to "mlxplat" driver. Fixes: 0170f616f496 ("platform: mellanox: Split initialization procedure") Signed-off-by: Vadim Pasternak <vadimp@nvidia.com> Reviewed-by: Michael Shych <michaelsh@nvidia.com> Link: https://lore.kernel.org/r/20230813083735.39090-2-vadimp@nvidia.com Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2023-08-12Merge tag 'for-6.5-rc5-tag' of ↵Linus Torvalds8-20/+99
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "More fixes, some of them going back to older releases and there are fixes for hangs in stress tests regarding space caching: - fixes and progress tracking for hangs in free space caching, found by test generic/475 - writeback fixes, write pages in integrity mode and skip writing pages that have been written meanwhile - properly clear end of extent range after an error - relocation fixes: - fix race betwen qgroup tree creation and relocation - detect and report invalid reloc roots" * tag 'for-6.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: set cache_block_group_error if we find an error btrfs: reject invalid reloc tree root keys with stack dump btrfs: exit gracefully if reloc roots don't match btrfs: avoid race between qgroup tree creation and relocation btrfs: properly clear end of the unreserved range in cow_file_range btrfs: don't wait for writeback on clean pages in extent_write_cache_pages btrfs: don't stop integrity writeback too early btrfs: wait for actual caching progress during allocation
2023-08-12Merge tag 'gpio-fixes-for-v6.5-rc6' of ↵Linus Torvalds2-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: - mark virtual chips exposed by gpio-sim as ones that can sleep (callbacks must not be called from interrupt context) - fix an off-by-one error in gpio-ws16c48 * tag 'gpio-fixes-for-v6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: ws16c48: Fix off-by-one error in WS16C48 resource region extent gpio: sim: mark the GPIO chip as a one that can sleep
2023-08-12locking: remove spin_lock_prefetchMateusz Guzik9-47/+1
The only remaining consumer is new_inode, where it showed up in 2001 as commit c37fa164f793 ("v2.4.9.9 -> v2.4.9.10") in a historical repo [1] with a changelog which does not mention it. Since then the line got only touched up to keep compiling. While it may have been of benefit back in the day, it is guaranteed to at best not get in the way in the multicore setting -- as the code performs *a lot* of work between the prefetch and actual lock acquire, any contention means the cacheline is already invalid by the time the routine calls spin_lock(). It adds spurious traffic, for short. On top of it prefetch is notoriously tricky to use for single-threaded purposes, making it questionable from the get go. As such, remove it. I admit upfront I did not see value in benchmarking this change, but I can do it if that is deemed appropriate. Removal from new_inode and of the entire thing are in the same patch as requested by Linus, so whatever weird looks can be directed at that guy. Link: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/fs/inode.c?id=c37fa164f793735b32aa3f53154ff1a7659e6442 [1] Signed-off-by: Mateusz Guzik <mjguzik@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-08-12Merge tag 'char-misc-6.5-rc6' of ↵Linus Torvalds27-103/+148
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 6.5-rc6 that resolve some reported issues. Included in here are: - bunch of iio driver fixes for reported problems - interconnect driver fixes - counter driver build fix - cardreader driver fixes - binder driver fixes - other tiny driver fixes All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits) misc: tps6594-esm: Disable ESM for rev 1 PMIC misc: rtsx: judge ASPM Mode to set PETXCFG Reg binder: fix memory leak in binder_init() iio: cros_ec: Fix the allocation size for cros_ec_command tools/counter: Makefile: Replace rmdir by rm to avoid make,clean failure iio: imu: lsm6dsx: Fix mount matrix retrieval iio: adc: meson: fix core clock enable/disable moment iio: core: Prevent invalid memory access when there is no parent iio: frequency: admv1013: propagate errors from regulator_get_voltage() counter: Fix menuconfig "Counter support" submenu entries disappearance dt-bindings: iio: adi,ad74115: remove ref from -nanoamp iio: adc: ina2xx: avoid NULL pointer dereference on OF device match iio: light: bu27008: Fix intensity data type iio: light: bu27008: Fix scale format iio: light: bu27034: Fix scale format iio: adc: ad7192: Fix ac excitation feature interconnect: qcom: sa8775p: add enable_mask for bcm nodes interconnect: qcom: sm8550: add enable_mask for bcm nodes interconnect: qcom: sm8450: add enable_mask for bcm nodes interconnect: qcom: Add support for mask-based BCMs ...
2023-08-12Merge tag 'usb-6.5-rc6' of ↵Linus Torvalds10-14/+79
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt driver fixes from Greg KH: "Here are some small USB and Thunderbolt driver fixes for reported problems. Included in here are: - thunderbolt driver memory leak fix - thunderbolt display flicker fix - usb dwc3 driver fix - usb gadget uvc disconnect crash fix - usb typec Kconfig build dependency fix - usb typec small fixes - usb-con-gpio bugfix - usb-storage old driver bugfix All of these have been in linux-next for a while with no reported issues" * tag 'usb-6.5-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: thunderbolt: Fix memory leak in tb_handle_dp_bandwidth_request() usb: dwc3: Properly handle processing of pending events usb-storage: alauda: Fix uninit-value in alauda_check_media() usb: common: usb-conn-gpio: Prevent bailing out if initial role is none USB: Gadget: core: Help prevent panic during UVC unconfigure usb: typec: mux: intel: Add dependency on USB_COMMON usb: typec: nb7vpq904m: Add an error handling path in nb7vpq904m_probe() usb: typec: altmodes/displayport: Signal hpd when configuring pin assignment usb: typec: tcpm: Fix response to vsafe0V event thunderbolt: Fix Thunderbolt 3 display flickering issue on 2nd hot plug onwards
2023-08-12Merge tag 'x86_urgent_for_v6.5_rc6' of ↵Linus Torvalds6-7/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Do not parse the confidential computing blob on non-AMD hardware as it leads to an EFI config table ending up unmapped - Use the correct segment selector in the 32-bit version of getcpu() in the vDSO - Make sure vDSO and VVAR regions are placed in the 47-bit VA range even on 5-level paging systems - Add models 0x90-0x91 to the range of AMD Zenbleed-affected CPUs * tag 'x86_urgent_for_v6.5_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu/amd: Enable Zenbleed fix for AMD Custom APU 0405 x86/mm: Fix VDSO and VVAR placement on 5-level paging machines x86/linkage: Fix typo of BUILD_VDSO in asm/linkage.h x86/vdso: Choose the right GDT_ENTRY_CPUNODE for 32-bit getcpu() on 64-bit kernel x86/sev: Do not try to parse for the CC blob on non-AMD hardware
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 02:31:08 +0300