| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Locally generated TCP GSO packets having to go through a GRE/SIT/IPIP
tunnel have to go through an expensive skb_unclone()
Reallocating skb->head is a lot of work.
Test should really check if a 'real clone' of the packet was done.
TCP does not care if the original gso_type is changed while the packet
travels in the stack.
This adds skb_header_unclone() which is a variant of skb_clone()
using skb_header_cloned() check instead of skb_cloned().
This variant can probably be used from other points.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Antonio Quartulli says:
====================
In this small batch of patches you have:
- a fix for our Distributed ARP Table that makes sure that the input
provided to the hash function during a query is the same as the one
provided during an insert (so to prevent false negatives), by Antonio
Quartulli
- a fix for our new protocol implementation B.A.T.M.A.N. V that ensures
that a hard interface is properly re-activated when it is brought down
and then up again, by Antonio Quartulli
- two fixes respectively to the reference counting of the tt_local_entry
and neigh_node objects, by Sven Eckelmann. Such bug is rather severe
as it would prevent the netdev objects references by batman-adv from
being released after shutdown.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- trans_timeout is incremented when tx queue timed out (tx watchdog).
- tx_maxrate is set via sysfs
Moving tx_maxrate to read-mostly part shrinks the struct by 64 bytes.
While at it, also move trans_timeout (it is out-of-place in the
'write-mostly' part).
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nikolay Aleksandrov says:
====================
bridge: per-vlan stats
This set adds support for bridge per-vlan statistics.
In order to be able to dump statistics for many vlans we need a way to
continue dumping after reaching maximum size, thus patches 01 and 02 extend
the new stats API with a per-device extended link stats attribute and
callback which can save its local state and continue where it left off
afterwards. I considered using the already existing "fill_xstats" callback
but it gets confusing since we need to separate the linkinfo dump from the
new stats api dump and adding a flag/argument to do that just looks messy.
I don't think the rtnl_link_ops size is an issue, so adding these seemed
like the cleaner approach.
Patches 03 and 04 add the stats support and netlink dump support
respectively. The stats accounting is controlled via a bridge option which
is default off, thus the performance impact is kept minimal.
I've tested this set with both old and modified iproute2, kmemleak on and
some traffic stress tests while adding/removing vlans and ports.
v3:
- drop the RCU pvid patch and remove one pointer fetch as requested
- make stats accounting optional with default to off, the option is in the
same cache line as vlan_proto and vlan_enabled, so it is already fetched
before the fast path check thus the performance impact is minimal, this
also allows us to avoid one vlan lookup and return early when using pvid
- rebased and retested
v2:
- Improve the error checking, rename lidx to prividx and save the current
idx user instead of restricting it to one in patch 01
- squash patch 02 into 01 and remove the restriction
- add callback descriptions, improve the size calculation and change the
xstats message structure to have an embedding level per rtnl link type
so we can avoid one call to get the link type (and thus filter on it)
and also each link type can now have any number of private attributes
inside
- fix a problem where the vlan stats are not dumped if the bridge has 0
vlans on it but has vlans on the ports, add bridge link type private
attributes and also add paddings for future extensions to avoid at least
a few netlink attributes and improve struct alignment
- drop the is_skb_forwardable argument constifying patch as it's not
needed anymore, but it's a nice cleanup which I'll send separately
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new LINK_XSTATS_TYPE_BRIDGE attribute and implement the
RTM_GETSTATS callbacks for IFLA_STATS_LINK_XSTATS (fill_linkxstats and
get_linkxstats_size) in order to export the per-vlan stats.
The paddings were added because soon these fields will be needed for
per-port per-vlan stats (or something else if someone beats me to it) so
avoiding at least a few more netlink attributes.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add support for per-VLAN Tx/Rx statistics. Every global vlan context gets
allocated a per-cpu stats which is then set in each per-port vlan context
for quick access. The br_allowed_ingress() common function is used to
account for Rx packets and the br_handle_vlan() common function is used
to account for Tx packets. Stats accounting is performed only if the
bridge-wide vlan_stats_enabled option is set either via sysfs or netlink.
A struct hole between vlan_enabled and vlan_proto is used for the new
option so it is in the same cache line. Currently it is binary (on/off)
but it is intentionally restricted to exactly 0 and 1 since other values
will be used in the future for different purposes (e.g. per-port stats).
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add callbacks to calculate the size and fill link extended statistics
which can be split into multiple messages and are dumped via the new
rtnl stats API (RTM_GETSTATS) with the IFLA_STATS_LINK_XSTATS attribute.
Also add that attribute to the idx mask check since it is expected to
be able to save state and resume dumping (e.g. future bridge per-vlan
stats will be dumped via this attribute and callbacks).
Each link type should nest its private attributes under the per-link type
attribute. This allows to have any number of separated private attributes
and to avoid one call to get the dev link type.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new prividx argument allows the current dumping device to save a
private state counter which would enable it to continue dumping from
where it left off. And the idxattr is used to save the current idx user
so multiple prividx using attributes can be requested at the same time
as suggested by Roopa Prabhu.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Tom Herbert says:
====================
net: Cleanup IPv6 ip tunnels
The IPv6 tunnel code is very different from IPv4 code. There is a lot
of redundancy with the IPv4 code, particularly in the GRE tunneling.
This patch set cleans up the tunnel code to make the IPv6 code look
more like the IPv4 code and use common functions between the two
stacks where possible.
This work should make it easier to maintain and extend the IPv6 ip
tunnels.
Items in this patch set:
- Cleanup IPv6 tunnel receive path (ip6_tnl_rcv). Includes using
gro_cells and exporting ip6_tnl_rcv so the ip6_gre can call it
- Move GRE functions to common header file (tx functions) or
gre_demux.c (rx functions like gre_parse_header)
- Call common GRE functions from IPv6 GRE
- Create ip6_tnl_xmit (to be like ip_tunnel_xmit)
Tested:
Ran super_netperf tests for TCP_RR and TCP_STREAM for:
- IPv4 over gre, gretap, gre6, gre6tap
- IPv6 over gre, gretap, gre6, gre6tap
- ipip
- ip6ip6
- ipip/gue
- IPv6 over gre/gue
- IPv4 over gre/gue
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Changes in GREv6 transmit path:
- Call gre_checksum, remove gre6_checksum
- Rename ip6gre_xmit2 to __gre6_xmit
- Call gre_build_header utility function
- Call ip6_tnl_xmit common function
- Call ip6_tnl_change_mtu, eliminate ip6gre_tunnel_change_mtu
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
A few generic changes to generalize tunnels in IPv6:
- Export ip6_tnl_change_mtu so that it can be called by ip6_gre
- Add tun_hlen to ip6_tnl structure.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create common functions for both IPv4 and IPv6 GRE in transmit. These
are put into gre.h.
Common functions are for:
- GRE checksum calculation. Move gre_checksum to gre.h.
- Building a GRE header. Move GRE build_header and rename
gre_build_header.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch renames ip6_tnl_xmit2 to ip6_tnl_xmit and exports it. Other
users like GRE will be able to call this. The original ip6_tnl_xmit
function is renamed to ip6_tnl_start_xmit (this is an ndo_start_xmit
function).
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
- Create gre_rcv function. This calls gre_parse_header and ip6gre_rcv.
- Call ip6_tnl_rcv. Doing this and using gre_parse_header eliminates
most of the code in ip6gre_rcv.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Several of the GRE functions defined in net/ipv4/ip_gre.c are usable
for IPv6 GRE implementation (that is they are protocol agnostic).
These include:
- GRE flag handling functions are move to gre.h
- GRE build_header is moved to gre.h and renamed gre_build_header
- parse_gre_header is moved to gre_demux.c and renamed gre_parse_header
- iptunnel_pull_header is taken out of gre_parse_header. This is now
done by caller. The header length is returned from gre_parse_header
in an int* argument.
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Some basic changes to make IPv6 tunnel receive path look more like
IPv4 path:
- Make ip6_tnl_rcv non-static so that GREv6 and others can call it
- Make ip6_tnl_rcv look like ip_tunnel_rcv
- Switch to gro_cells_receive
- Make ip6_tnl_rcv non-static and export it
Signed-off-by: Tom Herbert <tom@herbertland.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Eric Dumazet says:
====================
net: make TCP preemptible
Most of TCP stack assumed it was running from BH handler.
This is great for most things, as TCP behavior is very sensitive
to scheduling artifacts.
However, the prequeue and backlog processing are problematic,
as they need to be flushed with BH being blocked.
To cope with modern needs, TCP sockets have big sk_rcvbuf values,
in the order of 16 MB, and soon 32 MB.
This means that backlog can hold thousands of packets, and things
like TCP coalescing or collapsing on this amount of packets can
lead to insane latency spikes, since BH are blocked for too long.
It is time to make UDP/TCP stacks preemptible.
Note that fast path still runs from BH handler.
v2: Added "tcp: make tcp_sendmsg() aware of socket backlog"
to reduce latency problems of large sends.
v3: Fixed a typo in tcp_cdg.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Large sendmsg()/write() hold socket lock for the duration of the call,
unless sk->sk_sndbuf limit is hit. This is bad because incoming packets
are parked into socket backlog for a long time.
Critical decisions like fast retransmit might be delayed.
Receivers have to maintain a big out of order queue with additional cpu
overhead, and also possible stalls in TX once windows are full.
Bidirectional flows are particularly hurt since the backlog can become
quite big if the copy from user space triggers IO (page faults)
Some applications learnt to use sendmsg() (or sendmmsg()) with small
chunks to avoid this issue.
Kernel should know better, right ?
Add a generic sk_flush_backlog() helper and use it right
before a new skb is allocated. Typically we put 64KB of payload
per skb (unless MSG_EOR is requested) and checking socket backlog
every 64KB gives good results.
As a matter of fact, tests with TSO/GSO disabled give very nice
results, as we manage to keep a small write queue and smaller
perceived rtt.
Note that sk_flush_backlog() maintains socket ownership,
so is not equivalent to a {release_sock(sk); lock_sock(sk);},
to ensure implicit atomicity rules that sendmsg() was
giving to (possibly buggy) applications.
In this simple implementation, I chose to not call tcp_release_cb(),
but we might consider this later.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Socket backlog processing is a major latency source.
With current TCP socket sk_rcvbuf limits, I have sampled __release_sock()
holding cpu for more than 5 ms, and packets being dropped by the NIC
once ring buffer is filled.
All users are now ready to be called from process context,
we can unblock BH and let interrupts be serviced faster.
cond_resched_softirq() could be removed, as it has no more user.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sctp_inq_push() will soon be called without BH being blocked
when generic socket code flushes the socket backlog.
It is very possible SCTP can be converted to not rely on BH,
but this needs to be done by SCTP experts.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
UDP uses the generic socket backlog code, and this will soon
be changed to not disable BH when protocol is called back.
We need to use appropriate SNMP accessors.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
DCCP uses the generic backlog code, and this will soon
be changed to not disable BH when protocol is called back.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
AFAIK, nothing in current TCP stack absolutely wants BH
being disabled once socket is owned by a thread running in
process context.
As mentioned in my prior patch ("tcp: give prequeue mode some care"),
processing a batch of packets might take time, better not block BH
at all.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We want to to make TCP stack preemptible, as draining prequeue
and backlog queues can take lot of time.
Many SNMP updates were assuming that BH (and preemption) was disabled.
Need to convert some __NET_INC_STATS() calls to NET_INC_STATS()
and some __TCP_INC_STATS() to TCP_INC_STATS()
Before using this_cpu_ptr(net->ipv4.tcp_sk) in tcp_v4_send_reset()
and tcp_v4_send_ack(), we add an explicit preempt disabled section.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Iyappan Subramanian says:
====================
drivers: net: xgene: fix: Get channel number from device binding
This patch set adds 'channel' property to get ethernet to CPU channel number,
thus decoupling the Linux driver from static resource selection.
v2: Address review comments from v1
- removed irq reference from Linux driver
- added 'channel' property to get ethernet to CPU channel number
v1:
- Initial version
====================
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Added 'channel' property, describing ethernet to CPU channel number.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch gets ethernet to CPU channel (prefetch buffer number) from
the newly added 'channel' property, thus decoupling Linux driver from
resource management.
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a fairly minimal fixup to the horribly bad behavior of hash_64()
with certain input patterns.
In particular, because the multiplicative value used for the 64-bit hash
was intentionally bit-sparse (so that the multiply could be done with
shifts and adds on architectures without hardware multipliers), some
bits did not get spread out very much. In particular, certain fairly
common bit ranges in the input (roughly bits 12-20: commonly with the
most information in them when you hash things like byte offsets in files
or memory that have block factors that mean that the low bits are often
zero) would not necessarily show up much in the result.
There's a bigger patch-series brewing to fix up things more completely,
but this is the fairly minimal fix for the 64-bit hashing problem. It
simply picks a much better constant multiplier, spreading the bits out a
lot better.
NOTE! For 32-bit architectures, the bad old hash_64() remains the same
for now, since 64-bit multiplies are expensive. The bigger hashing
cleanup will replace the 32-bit case with something better.
The new constants were picked by George Spelvin who wrote that bigger
cleanup series. I just picked out the constants and part of the comment
from that series.
Cc: stable@vger.kernel.org
Cc: George Spelvin <linux@horizon.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shli/md
Pull MD fixes from Shaohua Li:
"This update includes several trival fixes. The only important one is
to fix MD bio merge, which has big performance impact"
* tag 'md/4.6-rc6-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
raid5: delete unnecessary warnning
MD: make bio mergeable
md/raid0: remove empty line printk from dump_zones
md/raid0: fix uninitialized variable bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull UDF fix from Jan Kara:
"A fix of a regression in UDF that got introduced in 4.6-rc1 by one of
the charset encoding fixes"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
udf: Fix conversion of 'dstring' fields to UTF8
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Here are some late but important fixes for the v4.6 kernel series.
ACPI and RCAR, so two driver fixes (PM related) and a self-evident
string lookup fix for ACPI GPIOs:
- A serious ACPI fix targeted for stable: lookup strings were being
free'd.
- Revert two patches from the RCAR driver"
* tag 'gpio-v4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpiolib-acpi: Duplicate con_id string when adding it to the crs lookup list
Revert "gpio: rcar: Fine-grained Runtime PM support"
Revert "gpio: rcar: Add Runtime PM handling for interrupts"
|
|
Pull networking fixes from David Miller:
1) MODULE_FIRMWARE firmware string not correct for iwlwifi 8000 chips,
from Sara Sharon.
2) Fix SKB size checks in batman-adv stack on receive, from Sven
Eckelmann.
3) Leak fix on mac80211 interface add error paths, from Johannes Berg.
4) Cannot invoke napi_disable() with BH disabled in myri10ge driver,
fix from Stanislaw Gruszka.
5) Fix sign extension problem when computing feature masks in
net_gso_ok(), from Marcelo Ricardo Leitner.
6) lan78xx driver doesn't count packets and packet lengths in its
statistics properly, fix from Woojung Huh.
7) Fix the buffer allocation sizes in pegasus USB driver, from Petko
Manolov.
8) Fix refcount overflows in bpf, from Alexei Starovoitov.
9) Unified dst cache handling introduced a preempt warning in
ip_tunnel, fix by resetting rather then setting the cached route.
From Paolo Abeni.
10) Listener hash collision test fix in soreuseport, from Craig Gallak
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits)
gre: do not pull header in ICMP error processing
net: Implement net_dbg_ratelimited() for CONFIG_DYNAMIC_DEBUG case
tipc: only process unicast on intended node
cxgb3: fix out of bounds read
net/smscx5xx: use the device tree for mac address
soreuseport: Fix TCP listener hash collision
net: l2tp: fix reversed udp6 checksum flags
ip_tunnel: fix preempt warning in ip tunnel creation/updating
samples/bpf: fix trace_output example
bpf: fix check_map_func_compatibility logic
bpf: fix refcnt overflow
drivers: net: cpsw: use of_phy_connect() in fixed-link case
dt: cpsw: phy-handle, phy_id, and fixed-link are mutually exclusive
drivers: net: cpsw: don't ignore phy-mode if phy-handle is used
drivers: net: cpsw: fix segfault in case of bad phy-handle
drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac config
MAINTAINERS: net: Change maintainer for GRETH 10/100/1G Ethernet MAC device driver
gre: reject GUE and FOU in collect metadata mode
pegasus: fixes reported packet length
pegasus: fixes URB buffer allocation size;
...
|
|
Pull sparc fixes from David Miller:
1) Fix panics with SR-IOV, from Babu Moger.
2) Wire up preadv2/pwritev2.
3) Allow proper auto-loading of VIO devices, from John Paul Adrian
Glaubitz.
4) Recognize Sonoma cpus, from Khalid Aziz.
5) Fix bootup regressions caused by syscall trace fixes made recently.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix bootup regressions on some Kconfig combinations.
sparc64: recognize and support Sonoma CPU type
sparc: Implement and wire up vio_hotplug for vio.
sparc: Implement and wire up modalias_show for vio.
sparc/pci: Refactor dev_archdata initialization into pci_init_dev_archdata
sparc/defconfigs: Remove CONFIG_IPV6_PRIVACY
sparc: Write up preadv2/pwritev2 syscalls.
sparc/PCI: Fix for panic while enabling SR-IOV
|
|
iptunnel_pull_header expects that IP header was already pulled; with this
expectation, it pulls the tunnel header. This is not true in gre_err.
Furthermore, ipv4_update_pmtu and ipv4_redirect expect that skb->data points
to the IP header.
We cannot pull the tunnel header in this path. It's just a matter of not
calling iptunnel_pull_header - we don't need any of its effects.
Fixes: bda7bb463436 ("gre: Allow multiple protocol listener for gre protocol.")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sudarsana Reddy Kalluru says:
====================
qed/qede: ethtool selftests support.
This series adds the driver support for following selftests:
1. Register test
2. Memory test
3. Clock test
4. Interrupt test
5. Internal loopback test
Patch (1) adds the qed driver infrastructure for selftests. Patches (2) and
(3) add qede driver support for ethtool selftests.
Please consider applying this series to "net-next".
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the qede implementation for internal loopback test.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: Manish Chopra <manish.chopra@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the qede ethtool support for the following tests:
- interrupt test
- memory test
- register test
- clock test
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the functionality and APIs needed for selftests.
It adds the ability to configure the link-mode which is required for the
implementation of loopback tests. It adds the APIs for clock test,
register test, interrupt test and memory test.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The dsa_switch structure ds is actually needed in very few places,
mostly during setup of the switch. The private structure ps is however
needed nearly everywhere. Pass ps, not ds internally.
[vd: rebased Andrew's patch.]
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
40GbE Intel Wired LAN Driver Updates 2016-05-01
This series contains updates to i40e and i40evf.
The theme of this series is code reduction, with several code cleanups in
this series. Starting with Neerav's removal of the code that implemented
the HMC AQ APIs and calls, since they are now obsolete and not supported
by firmware.
Anjali changes the default of VFs to make sure they are not trusted or
privileged until its explicitly set for trust through the new NDO op
interface. Also limited the number of MAC and VLAN addresses a VF can
add if it is untrusted/privileged.
Carolyn syncs the VF code for the changes made to the PF for the RSS
hash tuple settings, which ends up cleaning up much of the existing code.
Jesse cleans up compiler warnings which were found with gcc's W=2 option.
Then removed duplicate code, especially since only one copy was actually
being used.
Jacob addresses an issue which was found when testing GCC 6's which
happens to produce new warnings when you left shift a signed value
beyond the storage sizeof the type. The converts i40e & i40evf to use
the BIT() macro more consistently.
Alex actually bucks the trend of code removal by adding support for
both drivers to use GSO_PARTIAL so that segmentation of frames with
checksums enabled in outer headers is supported. Fortunately it does
not take much to add this support!
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to commit d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op
when !DEBUG") the implementation of net_dbg_ratelimited() was buggy
for both the DEBUG and CONFIG_DYNAMIC_DEBUG cases.
The bug was that net_ratelimit() was being called and, despite
returning true, nothing was being printed to the console. This
resulted in messages like the following -
"net_ratelimit: %d callbacks suppressed"
with no other output nearby.
After commit d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op when
!DEBUG") the bug is fixed for the DEBUG case. However, there's no
output at all for CONFIG_DYNAMIC_DEBUG case.
This patch restores debug output (if enabled) for the
CONFIG_DYNAMIC_DEBUG case.
Add a definition of net_dbg_ratelimited() for the CONFIG_DYNAMIC_DEBUG
case. The implementation takes care to check that dynamic debugging is
enabled before calling net_ratelimit().
Fixes: d92cff89a0c8 ("net_dbg_ratelimited: turn into no-op when !DEBUG")
Signed-off-by: Tim Bingham <tbingham@akamai.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Dave Miller pointed out that fb586f25300f ("sctp: delay calls to
sk_data_ready() as much as possible") may insert latency specially if
the receiving application is running on another CPU and that it would be
better if we signalled as early as possible.
This patch thus basically inverts the logic on fb586f25300f and signals
it as early as possible, similar to what we had before.
Fixes: fb586f25300f ("sctp: delay calls to sk_data_ready() as much as possible")
Reported-by: Dave Miller <davem@davemloft.net>
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have observed complete lock up of broadcast-link transmission due to
unacknowledged packets never being removed from the 'transmq' queue. This
is traced to nodes having their ack field set beyond the sequence number
of packets that have actually been transmitted to them.
Consider an example where node 1 has sent 10 packets to node 2 on a
link and node 3 has sent 20 packets to node 2 on another link. We
see examples of an ack from node 2 destined for node 3 being treated as
an ack from node 2 at node 1. This leads to the ack on the node 1 to node
2 link being increased to 20 even though we have only sent 10 packets.
When node 1 does get around to sending further packets, none of the
packets with sequence numbers less than 21 are actually removed from the
transmq.
To resolve this we reinstate some code lost in commit d999297c3dbb ("tipc:
reduce locking scope during packet reception") which ensures that only
messages destined for the receiving node are processed by that node. This
prevents the sequence numbers from getting out of sync and resolves the
packet leakage, thereby resolving the broadcast-link transmission
lock-ups we observed.
While we are aware that this change only patches over a root problem that
we still haven't identified, this is a sanity test that it is always
legitimate to do. It will remain in the code even after we identify and
fix the real problem.
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: John Thompson <john.thompson@alliedtelesis.co.nz>
Signed-off-by: Hamish Martin <hamish.martin@alliedtelesis.co.nz>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An out of bounds read of 2 bytes was discovered in cxgb3 with KASAN.
t3_config_rss() expects both arrays it gets as parameters to have
terminators. setup_rss(), the caller, forgets to add a terminator to
one of the arrays. Thankfully the iteration in t3_config_rss() stops
anyway, but in the last iteration the check for the terminator
is an out of bounds read.
Add the missing terminator to rspq_map[].
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Michal Schmidt <mschmidt@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This takes the MAC address for smsc75xx/smsc95xx USB network devices
from a the device tree. This is required to get a usable persistent
address on the popular beagleboard, whose hardware designers
accidentally forgot that an ethernet device really requires an a
MAC address to be functional.
The Raspberry Pi also ships smsc9514 without a serial EEPROM, stores
the MAC address in ROM accessible via VC4 firmware.
The smsc75xx and smsc95xx drivers are just two copies of the
same code, so better fix both.
[lkundrak@v3.sk: updated to use of_get_property() as per suggestion from
Arnd, reworded the message and comments a bit]
Tested-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since commit b74766a0a0fe ("phylib: don't return NULL
from get_phy_device()") in linux-next, phy_get_device() will return
ERR_PTR(-ENODEV) instead of NULL if the PHY device ID is all ones.
This causes problem with stmmac driver and likely some other drivers
which call mdiobus_register(). I triggered this bug on SoCFPGA MCVEVK
board with linux-next 20160427 and 20160428. In case of the stmmac, if
there is no PHY node specified in the DT for the stmmac block, the stmmac
driver ( drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c function
stmmac_mdio_register() ) will call mdiobus_register() , which will
register the MDIO bus and probe for the PHY.
The mdiobus_register() resp. __mdiobus_register() iterates over all of
the addresses on the MDIO bus and calls mdiobus_scan() for each of them,
which invokes get_phy_device(). Before the aforementioned patch, the
mdiobus_scan() would return NULL if no PHY was found on a given address
and mdiobus_register() would continue and try the next PHY address. Now,
mdiobus_scan() returns ERR_PTR(-ENODEV), which is caught by the
'if (IS_ERR(phydev))' condition and the loop exits immediately if the
PHY address does not contain PHY.
Repair this by explicitly checking for the ERR_PTR(-ENODEV) and if this
error comes around, continue with the next PHY address.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes it so that i40e and i40evf can use GSO_PARTIAL to support
segmentation for frames with checksums enabled in outer headers. As a
result we can now send data over these types of tunnels at over 20Gb/s
versus the 12Gb/s that was previously possible on my system.
The advantage with the i40e parts is that this offload is mostly
transparent as the hardware still deals with the inner and/or outer IPv4
headers so the IP ID is still incrementing for both when this offload is
performed.
Signed-off-by: Alexander Duyck <aduyck@mirantis.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
|
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
|
