| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sometimes, end-users change the jack type under suspending,
so it needs to re-detect the combo jack type after resuming to
avoid any unexpected behaviors.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-2-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When the system suspends, the codec driver will set SAR to
power saving mode if a headset is plugged in.
There is a chance to generate an unexpected IRQ, and leads to
issues after resuming such as noise from OMTP type headsets.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20211109095450.12950-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Revert 'I2S Reference' to SOC_ENUM_EXT because the settings are specific
for some platforms, the default setting for 'I2S Reference' does nothing,
only some SoC platform need to configure it.
Previous 'I2S Reference' in SOC_ENUM format only toggles one bit of
RT1011_TDM1_SET_1 register, which isn't enough for specific platform.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://lore.kernel.org/r/20211111091705.20879-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use device id reg to be compatible with rt9120 and rt9120s.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1636515921-31694-4-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If fs is divided by 48, to make audio clock sync rate correct, internal
sync function have be disabled.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1636515921-31694-3-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update internal ocp level to correct value.
Even the wrong ocp setting can also make the sound output, but the power
cannot match the IC capability.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://lore.kernel.org/r/1636515921-31694-2-git-send-email-u0084500@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Loud Technologies shipped Onyx 1200f 2008 in its Mackie brand and
already discontinued. The model uses component of Fireworks board
module as its communication and DSP function.
The latest firmware (v4.6.0) has a quirk that tx packet includes wrong
value (0x1f) in its dbs field at middle and higher sampling transfer
frequency. It brings ALSA fireworks driver discontinuity of data block
counter.
This commit fixes it by assuming it as a quirk of firmware version
4.6.0.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0404b9ef bus_info_length 4, crc_length 4, crc 47599
404 31333934 bus_name "1394"
408 e064a212 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 100,
max_rec 10 (2048), max_rom 2, gen 1, spd 2 (S400)
40c 000ff209 company_id 000ff2 |
410 62550ce0 device_id 0962550ce0 | EUI-64 000ff20962550ce0
root directory
-----------------------------------------------------------------
414 0008088e directory_length 8, crc 2190
418 03000ff2 vendor
41c 8100000f --> descriptor leaf at 458
420 1701200f model
424 81000018 --> descriptor leaf at 484
428 0c008380 node capabilities
42c 8d000003 --> eui-64 leaf at 438
430 d1000005 --> unit directory at 444
434 08000ff2 (immediate value)
eui-64 leaf at 438
-----------------------------------------------------------------
438 000281ae leaf_length 2, crc 33198
43c 000ff209 company_id 000ff2 |
440 62550ce0 device_id 0962550ce0 | EUI-64 000ff20962550ce0
unit directory at 444
-----------------------------------------------------------------
444 00045d94 directory_length 4, crc 23956
448 1200a02d specifier id: 1394 TA
44c 13010000 version
450 1701200f model
454 8100000c --> descriptor leaf at 484
descriptor leaf at 458
-----------------------------------------------------------------
458 000a199d leaf_length 10, crc 6557
45c 00000000 textual descriptor
460 00000000 minimal ASCII
464 4d61636b "Mack"
468 69650000 "ie"
46c 00000000
470 00000000
474 00000000
478 00000000
47c 00000000
480 00000000
descriptor leaf at 484
-----------------------------------------------------------------
484 000a0964 leaf_length 10, crc 2404
488 00000000 textual descriptor
48c 00000000 minimal ASCII
490 4f6e7978 "Onyx"
494 20313230 " 120"
498 30460000 "0F"
49c 00000000
4a0 00000000
4a4 00000000
4a8 00000000
4ac 00000000
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211111103015.7498-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Fix a corner case between PCI device driver remove callback and
runtime PM idle callback.
Following sequence of events can happen:
- at azx_create, context is allocated with devm_kzalloc() and
stored as pci_set_drvdata()
- user-space requests to unbind audio driver
- dd.c:__device_release_driver() calls PCI remove
- pci-driver.c:pci_device_remove() calls the audio
driver azx_remove() callback and this is completed
- pci-driver.c:pm_runtime_put_sync() leads to a call
to rpm_idle() which again calls azx_runtime_idle()
- the azx context object, as returned by dev_get_drvdata(),
is no longer valid
-> access fault in azx_runtime_idle when executing
struct snd_card *card = dev_get_drvdata(dev);
chip = card->private_data;
if (chip->disabled || hda->init_failed)
This was discovered by i915_module_load test with 5.15.0 based
linux-next tree.
Example log caught by i915_module_load test with linux-next
https://intel-gfx-ci.01.org/tree/linux-next/
<4> [264.038232] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b73f0: 0000 [#1] PREEMPT SMP NOPTI
<4> [264.038248] CPU: 0 PID: 5374 Comm: i915_module_loa Not tainted 5.15.0-next-20211109-gc8109c2ba35e-next-20211109 #1
[...]
<4> [264.038267] RIP: 0010:azx_runtime_idle+0x12/0x60 [snd_hda_intel]
[...]
<4> [264.038355] Call Trace:
<4> [264.038359] <TASK>
<4> [264.038362] __rpm_callback+0x3d/0x110
<4> [264.038371] rpm_idle+0x27f/0x380
<4> [264.038376] __pm_runtime_idle+0x3b/0x100
<4> [264.038382] pci_device_remove+0x6d/0xa0
<4> [264.038388] device_release_driver_internal+0xef/0x1e0
<4> [264.038395] unbind_store+0xeb/0x120
<4> [264.038400] kernfs_fop_write_iter+0x11a/0x1c0
Fix the issue by setting drvdata to NULL at end of azx_remove().
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20211110210307.1172004-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent change in hda-intel driver to allow repeated probes
surfaced a problem that has been hidden until; the probe process in
the work calls azx_free() at the error path, and this skips the card
free process that eventually releases codec instances. As a result,
we get a kernel WARNING like:
snd_hda_intel 0000:00:1f.3: Cannot probe codecs, giving up
------------[ cut here ]------------
WARNING: CPU: 14 PID: 186 at sound/hda/hdac_bus.c:73
....
For fixing this, we need to call snd_card_free() instead of
azx_free(). Additionally, the device drvdata has to be cleared, as
the driver binding itself is still active. Then the PM and other
driver callbacks will ignore the procedure.
Fixes: c0f1886de7e1 ("ALSA: hda: intel: Allow repeatedly probing on codec configuration errors")
Reported-and-tested-by: Scott Branden <scott.branden@broadcom.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/063e2397-7edb-5f48-7b0d-618b938d9dd8@broadcom.com
Link: https://lore.kernel.org/r/20211110194633.19098-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute and micmute LEDs don't work on HP EliteBook 840 G7. The same
quirk for other HP laptops can let LEDs work, so apply it.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211110144033.118451-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The comment about the reused vmalloc helpers is no longer valid after
the recent change for the noncontig allocator. Drop the stale
comment.
Fixes: ad4f93ca4138 ("ALSA: memalloc: Use proper SG helpers for noncontig allocations")
Link: https://lore.kernel.org/r/20211110063100.21359-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
If kcalloc() return NULL due to memory starvation, it is possible for
kstrdup() to return NULL in similar case. So add null check after the call
to kstrdup() is made.
[ minor coding-style fix by tiwai ]
Signed-off-by: Austin Kim <austin.kim@lge.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211109003742.GA5423@raspberrypi
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recently introduced non-contiguous page allocation support helpers
are using the simplified code to calculate the page and DMA address
based on the vmalloc helpers, but this isn't quite right as the vmap
is valid only for the direct DMA.
This patch corrects those accessors to use the proper SG helpers
instead.
Fixes: a25684a95646 ("ALSA: memalloc: Support for non-contiguous page allocation")
Tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/r/20211108151059.31898-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent fix for setting up the DMA buffer type on RME drivers tried
to address the non-standard memory managements and changed the DMA
buffer information to the standard snd_dma_buffer object that is
allocated at the probe time. However, I overlooked that the RME
drivers handle the buffer addresses based on 64k alignment, and the
previous conversion broke that silently.
This patch is an attempt to fix the regression. The snd_dma_buffer
objects are copied to the original data with the correction to the
aligned accesses, and those are passed to snd_pcm_set_runtime_buffer()
helpers instead. The original snd_dma_buffer objects are managed by
devres, hence they'll be released automagically.
Fixes: 0899a7a23047 ("ALSA: pci: rme: Set up buffer type properly")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211108145752.30572-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mark of the Unicorn designed Track 16 2011 as one of models in third
generation of its FireWire series. The model is already discontinued.
It consists of below ICs:
* Texas Instruments TSB41AB1
* Microchip (SMSC) USB3300
* Xilinx Spartan-3A FPGA, XC3S700A
* Texas Instruments TMS320C6722
* Microchip (Atmel) AT91SAM SAM7S512
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and the type of signal in optical interfaces. The model supports
transmission of PCM frames as well as MIDI messages.
The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.
This commit adds support for it.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04107d95 bus_info_length 4, crc_length 16, crc 32149
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 000a83c4 device_id 00000a83c4 | EUI-64 0001f200000a83c4
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 00035b04 directory_length 3, crc 23300
42c 120001f2 specifier id
430 13000039 version
434 17102800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 0002b25f leaf_length 2, crc 45663
43c 0001f200 company_id 0001f2 |
440 000a83c4 device_id 00000a83c4 | EUI-64 0001f200000a83c4
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211107110644.23511-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The recent refactoring of mmap handling caused Oops on some devices
that don't use the standard memory allocations. This patch addresses
it by allowing snd_dma_buffer_mmap() helper to receive the NULL
pointer dmab argument (and return an error appropriately).
Fixes: a202bd1ad86d ("ALSA: core: Move mmap handler into memalloc ops")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211107163911.13534-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
ASUS UX550VE (SSID 1043:1970) requires a similar workaround for
managing the routing of the 4 speakers like some other ASUS models.
Add a corresponding quirk entry for fixing it.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212641
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211107083339.18013-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-10-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Product audio hardware configuration is rt711 on link2,
two rt1316s on link0 and link1, rt714 on link 3.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Product audio hardware configuration is rt1316 on link2,
rt714 on link 3.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This product supports SoundWire capture from local microphones
and one SoundWire amplifier(no headset codec).
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This product supports a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Both products support a SoundWire headset codec, SoundWire
capture from local microphones and two SoundWire amplifiers.
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
New product audio hardware configuration is rt714 on link0,
two rt1316s on link1 and link2
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This product supports SoundWire capture from local microphones
and two SoundWire amplifiers(no headset codec).
Signed-off-by: Gongjun Song <gongjun.song@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211105022646.26305-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some RT5645 and RT5650 powered platforms are using "Ext Spk"
instead of "Speaker", and this is also reflected in alsa-lib
configurations for the generic RT5645 usecase manager configs.
Rename the "Speaker" control to "Ext Spk" in order to be able
to make the userspace reuse/inherit the same configurations also
for this machine, along with the others.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211105152013.75252-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The recent fix for DAPM to correct the kctl change notification by the
commit 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change
notifications") caused other regressions since it changed the behavior
of snd_soc_dapm_set_pin() that is called from several API functions.
Formerly it returned always 0 for success, but now it returns 0 or 1.
This patch addresses it, restoring the old behavior of
snd_soc_dapm_set_pin() while keeping the fix in
snd_soc_dapm_put_pin_switch().
Fixes: 5af82c81b2c4 ("ASoC: DAPM: Fix missing kctl change notifications")
Reported-by: Yu-Hsuan Hsu <yuhsuan@chromium.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20211105090925.20575-1-tiwai@suse.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If codec is in runtime suspend, but controller is not, hotplug events
are missed as the codec has no way to alert the controller. Problem does
not occur if both controller and codec are active, or when both are
suspended.
An easy way to reproduce is to play an audio stream on one codec (e.g.
to HDMI/DP display codec), wait for other HDA codec to go to runtime
suspend, and then plug in a headset to the suspended codec. The jack
event is not reported correctly in this case. Another way to reproduce
is to force controller to stay active with
"snd_sof_pci.sof_pci_debug=0x1"
Fix the issue by reconfiguring the WAKEEN register when powering up/down
individual links, and handling control events in the interrupt handler.
Fixes: 87fc20e4a0cb ("ASoC: SOF: Intel: hda: use hdac_ext fine-grained link management")
Reported-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20211105111655.668777-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Like the previous fix (commit c0317c0e8709 "ALSA: timer: Fix
use-after-free problem"), we have to unlink slave timer instances
immediately at snd_timer_stop(), too. Otherwise it may leave a stale
entry in the list if the slave instance is freed before actually
running.
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211105091517.21733-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Although we've covered all calls with NULL dma buffer pointer, so far,
there may be still some else in the wild. For catching such a case
more easily, add a WARN_ON_ONCE() in snd_dma_get_ops().
Fixes: 37af81c5998f ("ALSA: core: Abstract memory alloc helpers")
Link: https://lore.kernel.org/r/20211105102103.28148-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This reverts commit 2d9ea39917a4e4293bc2caea902c7059a330b611.
We've got a regression report showing that the audio got broken the
device over AMD IOMMU. The conversion assumed the wrong pointer /
page mapping for the indirect mapping case, and we need to correct
this urgently, so let's revert it for now.
Fixes: 2d9ea39917a4 ("ALSA: memalloc: Convert x86 SG-buffer handling with non-contiguous type")
Reported-and-tested-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Link: https://lore.kernel.org/r/20211104180846.16340-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Another model requires ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211104155726.2090997-1-perex@perex.cz
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Mark of the Unicorn (MOTU) shipped Traveler mk3 as one of models in third
generation of its FireWire series, and discontinued it already. The model
consists of below ICs:
* Texas Instruments TSB41AB2
* Phillips Semiconductors PDI1394L40
* Altera cyclone EP1C3
* Texas Instruments TMS320VC5402
It supports sampling transfer frequency up to 192.0 kHz. The packet
format differs depending on both of current sampling transfer frequency
and whether to enable ADAT channels in rx/tx packets. The model supports
transmission of PCM frames as well as MIDI messages.
The model supports command mechanism to configure internal DSP. Hardware
meter information is available in the first 2 chunks of each data block
of tx packet.
This commit adds support for it.
$ cd linux-firewire-tools/src
$ python crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 0410af0a bus_info_length 4, crc_length 16, crc 44810
404 31333934 bus_name "1394"
408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256)
40c 0001f200 company_id 0001f2 |
410 00090911 device_id 0000090911 | EUI-64 0001f20000090911
root directory
-----------------------------------------------------------------
414 0004ef04 directory_length 4, crc 61188
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 d1000002 --> unit directory at 428
424 8d000005 --> eui-64 leaf at 438
unit directory at 428
-----------------------------------------------------------------
428 00031733 directory_length 3, crc 5939
42c 120001f2 specifier id
430 1300001b version
434 17102800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 00028484 leaf_length 2, crc 33924
43c 0001f200 company_id 0001f2 |
440 00090911 device_id 0000090911 | EUI-64 0001f20000090911
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20211104110627.94469-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The second parameter for snd_sof_ipc_set_get_comp_data() is ipc_cmd, not
ipc_ctrl_type and the type is u32.
Fixes: 756bbe4205bc6 ("ASoC: SOF: Handle control change notification from firmware")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Acked-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20211103082710.17165-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
On Clevo NH77HJ, NH77HP, and their 15" variants, there is a headset
microphone input attached to 0x19 that does not have a jack detect. In
order to get it working, the pin configuration needs to be set
correctly, and a new ALC256_FIXUP_SYSTEM76_MIC_NO_PRESENCE fixup is
applied. This is similar to the existing System76 quirk for ALC293, but
for ALC256.
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102172104.10610-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
When the timer instance was add into ack_list but was not currently in
process, the user could stop it via snd_timer_stop1() without delete it
from the ack_list. Then the user could free the timer instance and when
it was actually processed UAF occurred.
This issue could be reproduced via testcase snd_timer01 in ltp - running
several instances of that testcase at the same time.
What I actually met was that the ack_list of the timer broken and the
kernel went into deadloop with irqoff. That could be detected by
hardlockup detector on board or when we run it on qemu, we could use gdb
to dump the ack_list when the console has no response.
To fix this issue, we delete the timer instance from ack_list and
active_list unconditionally in snd_timer_stop1().
Signed-off-by: Wang Wensheng <wangwensheng4@huawei.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211103033517.80531-1-wangwensheng4@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Audient iD14 (2708:0002) may get a control message error that
interferes the operation e.g. with alsactl. Add the quirk to ignore
such errors like other devices.
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1191247
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211102161859.19301-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Currently the internal monitor sources are input widgets, which means
if the card is set to fully routed these will not enable unless connected
to something in the machine driver. However, all these are internal
monitor signals so it makes no sense to connect them to something in the
machine driver. As such switch them to siggen widgets which will have
the same behaviour except not require external linkage on a fully routed
card.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: David Rhodes <drhodes@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211029214028.401284-1-drhodes@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Apply the PB51ED PCI quirk to the Clevo PC70HS. Fixes audio output from
the internal speakers.
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211101162134.5336-1-tcrawford@system76.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.16
This is an unusually large set of updates, mostly a large crop of
unusually big drivers coupled with extensive overhauls of existing code.
There's a SH change here for the DAI format terminology, the change is
straightforward and the SH maintainers don't seem very active.
- A new version of the audio graph card which supports a wider range of
systems.
- Move of the Cirrus DSP framework into drivers/firmware to allow for
future use by non-audio DSPs.
- Several conversions to YAML DT bindings.
- Continuing cleanups to the SOF and Intel code.
- A very big overhaul of the cs42l42 driver, correcting many problems.
- Support for AMD Vangogh and Yelow Cap, Cirrus CS35L41, Maxim
MAX98520 and MAX98360A, Mediatek MT8195, Nuvoton NAU8821, nVidia
Tegra210, NXP i.MX8ULP, Qualcomm AudioReach, Realtek ALC5682I-VS,
RT5682S, and RT9120 and Rockchip RV1126 and RK3568
|
|
Adding the Line6 HX-Stomp XL USB_ID as it needs this fixed frequency
quirk as well.
The device is basically just the HX-Stomp with some more buttons on
the face. I've done some recording with it after adding it, and it
seems to function properly with this fix. The Midi features appear to
be working as well.
[ a coding style fix and patch reformat by tiwai ]
Signed-off-by: Jason Ormes <skryking@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030200405.1358678-1-skryking@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add another device ID for JBL Quantum 400. It requires the same quirk as
other JBL Quantum devices.
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20211030174308.1011825-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge 5.16-devel branch for upstreaming
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
|
|
|
|
<brent.lu@intel.com>:
Support multiple headphone drivers in same machine driver. In this
case, both rt5682 and rt5682s are supported and enumerated by different
ACPI HID "10EC5682" and "RTL5682".
V2 Changes:
- remove useless 'NULL', 'false' in if-condition
- can use 'comp_ids' field alone to enumerate driver
- add comma to the end of entry in structure initialization
- keep the table of byt/cht/cml/icl untouched
V3 Changes:
- upstreamd from SOF github, PR#3200
- use new compatiable IDs to shrink the enumerate table of BYT and CHT
- add 'const' to snd_soc_acpi_codecs structures
V4 Changes:
- add signoff to patch 4~6
V5 Changes:
- none, just rebase for patch 3 conflict
Brent Lu (3):
ASoC: soc-acpi: add comp_ids field for machine driver matching
ASoC: Intel: sof_rt5682: detect codec variant in probe function
ASoC: Intel: sof_rt5682: use comp_ids to enumerate rt5682s
Pierre-Louis Bossart (3):
ASoC: Intel: soc-acpi-byt: shrink tables using compatible IDs
ASoC: Intel: soc-acpi-cht: shrink tables using compatible IDs
ASoC: Intel: soc-acpi: use const for all uses of snd_soc_acpi_codecs
include/sound/soc-acpi.h | 3 +
sound/soc/intel/boards/sof_rt5682.c | 34 ++-------
.../intel/common/soc-acpi-intel-adl-match.c | 11 ++-
.../intel/common/soc-acpi-intel-bxt-match.c | 2 +-
.../intel/common/soc-acpi-intel-byt-match.c | 68 +++++++-----------
.../intel/common/soc-acpi-intel-cht-match.c | 69 +++++++------------
.../intel/common/soc-acpi-intel-cml-match.c | 8 +--
.../intel/common/soc-acpi-intel-glk-match.c | 2 +-
.../intel/common/soc-acpi-intel-jsl-match.c | 43 ++++--------
.../intel/common/soc-acpi-intel-kbl-match.c | 12 ++--
.../intel/common/soc-acpi-intel-skl-match.c | 2 +-
.../intel/common/soc-acpi-intel-tgl-match.c | 11 ++-
sound/soc/soc-acpi.c | 24 ++++++-
13 files changed, 119 insertions(+), 170 deletions(-)
--
2.25.1
|
|
Rojewski <cezary.rojewski@intel.com>:
Couple of soc-topology related changes and a use-after-free fix. Said fix
and two sanity checks for soc-topology lead the way. While the
use-after-free is quite obvious, the sanity checks are here to cover for
cases where user malformed the topology file -or- access to filesystem
somehow got interrupted during copy operation. We shouldn't be reading
outside the file boundary.
Afterward a change to soc_tplg_add_kcontrol(): device being passed to
soc_tplg_add_dcontrol() from comp->dev to tplg->dev which corrects
dev_xxx() invoked later on.
Also, device used for topology memory allocations from component->dev to
component->card->dev so memory gets freed each time card device (usually
platform device) is removed rather than the component device what may
happen less frequently.
Dummy component gets smarter and no longer overrides hw_params if
there are other components accociated with related struct
snd_soc_pcm_runtime instance.
Amadeusz Sławiński (5):
ASoC: core: Remove invalid snd_soc_component_set_jack call
ASoC: topology: Check for dapm widget completeness
ASoC: topology: Use correct device for prints
ASoC: topology: Change topology device to card device
ASoC: Stop dummy from overriding hwparams
Cezary Rojewski (1):
ASoC: topology: Add header payload_size verification
sound/soc/soc-core.c | 3 ---
sound/soc/soc-topology.c | 34 ++++++++++++++++++++++++++++++----
sound/soc/soc-utils.c | 13 +++++++++++++
3 files changed, 43 insertions(+), 7 deletions(-)
--
2.25.1
|
|
If we return before the end of the 'for_each_child_of_node()' iterator, the
reference taken on 'np' must be released.
Add the missing 'of_node_put()' call.
Fixes: c413983eb66a ("ASoC: rsnd: adjust disabled module")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/4c0e893cbfa21dc76c1ede0b6f4f8cff42209299.1634586167.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
|
