summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-26net: ethernet: stmicro: stmmac: permit MTU change with interface upChristian Marangi1-6/+24
Remove the limitation where the interface needs to be down to change MTU by releasing and opening the stmmac driver to set the new MTU. Also call the set_filter function to correctly init the port. This permits to remove the EBUSY error while the ethernet port is running permitting a correct MTU change if for example a DSA request a MTU change for a switch CPU port. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: ethernet: stmicro: stmmac: generate stmmac dma conf before openChristian Marangi1-173/+289
Rework the driver to generate the stmmac dma_conf before stmmac_open. This permits a function to first check if it's possible to allocate a new dma_config and then pass it directly to __stmmac_open and "open" the interface with the new configuration. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: ethernet: stmicro: stmmac: move dma conf to dedicated structChristian Marangi7-163/+172
Move dma buf conf to dedicated struct. This in preparation for code rework that will permit to allocate separate dma_conf without affecting the priv struct. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: ethernet: stmicro: stmmac: first disable all queues and disconnect in ↵Christian Marangi1-2/+2
release Disable all queues and disconnect before tx_disable in stmmac_release to prevent a corner case where packet may be still queued at the same time tx_disable is called resulting in kernel panic if some packet still has to be processed. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: ethernet: stmicro: stmmac: move queue reset to dedicated functionsChristian Marangi1-28/+31
Move queue reset to dedicated functions. This aside from a simple cleanup is also required to allocate a dma conf without resetting the tx queue while the device is temporarily detached as now the reset is not part of the dma init function and can be done later in the code flow. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: delete extra space and tab in blank lineWilliam Dean2-2/+2
delete extra space and tab in blank line, there is no functional change. Reported-by: Hacash Robot <hacashRobot@santino.com> Signed-off-by: William Dean <williamsukatube@gmail.com> Link: https://lore.kernel.org/r/20220723073222.2961602-1-williamsukatube@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26net: dsa: fix reference counting for LAG FDBsVladimir Oltean1-0/+1
Due to an invalid conflict resolution on my side while working on 2 different series (LAG FDBs and FDB isolation), dsa_switch_do_lag_fdb_add() does not store the database associated with a dsa_mac_addr structure. So after adding an FDB entry associated with a LAG, dsa_mac_addr_find() fails to find it while deleting it, because &a->db is zeroized memory for all stored FDB entries of lag->fdbs, and dsa_switch_do_lag_fdb_del() returns -ENOENT rather than deleting the entry. Fixes: c26933639b54 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220723012411.1125066-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26i40e: Fix interface init with MSI interrupts (no MSI-X)Michal Maloszewski1-0/+4
Fix the inability to bring an interface up on a setup with only MSI interrupts enabled (no MSI-X). Solution is to add a default number of QPs = 1. This is enough, since without MSI-X support driver enables only a basic feature set. Fixes: bc6d33c8d93f ("i40e: Fix the number of queues available to be mapped for use") Signed-off-by: Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220722175401.112572-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26Merge tag 'wireless-next-2022-07-25' of ↵Jakub Kicinski179-6856/+9151
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v5.20 Third set of patches for v5.20. MLO work continues and we have a lot of stack changes due to that, including driver API changes. Not much driver patches except on mt76. Major changes: cfg80211/mac80211 - more prepartion for Wi-Fi 7 Multi-Link Operation (MLO) support, works with one link now - align with IEEE Draft P802.11be_D2.0 - hardware timestamps for receive and transmit mt76 - preparation for new chipset support - ACPI SAR support * tag 'wireless-next-2022-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (254 commits) wifi: mac80211: fix link data leak wifi: mac80211: mlme: fix disassoc with MLO wifi: mac80211: add macros to loop over active links wifi: mac80211: remove erroneous sband/link validation wifi: mac80211: mlme: transmit assoc frame with address translation wifi: mac80211: verify link addresses are different wifi: mac80211: rx: track link in RX data wifi: mac80211: optionally implement MLO multicast TX wifi: mac80211: expand ieee80211_mgmt_tx() for MLO wifi: nl80211: add MLO link ID to the NL80211_CMD_FRAME TX API wifi: mac80211: report link ID to cfg80211 on mgmt RX wifi: cfg80211: report link ID in NL80211_CMD_FRAME wifi: mac80211: add hardware timestamps for RX and TX wifi: cfg80211: add hardware timestamps to frame RX info wifi: cfg80211/nl80211: move rx management data into a struct wifi: cfg80211: add a function for reporting TX status with hardware timestamps wifi: nl80211: add RX and TX timestamp attributes wifi: ieee80211: add helper functions for detecting TM/FTM frames wifi: mac80211_hwsim: handle links for wmediumd/virtio wifi: mac80211: sta_info: fix link_sta insertion ... ==================== Link: https://lore.kernel.org/r/20220725174547.EA465C341C6@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-26dt-bindings: net: fsl,fec: Add nvmem-cells / nvmem-cell-names propertiesAlexander Stein1-1/+5
These properties are inherited from ethernet-controller.yaml. This fixes the dt_binding_check warning: imx8mm-tqma8mqml-mba8mx.dt.yaml: ethernet@30be0000: 'nvmem-cell-names', 'nvmem-cells' do not match any of the regexes: 'pinctrl-[0-9]+' Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220720063924.1412799-1-alexander.stein@ew.tq-group.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-25Merge ath-next from git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo10-19/+14
ath.git patches for v5.20. One fix and rest minor cleanup.
2022-07-25Merge branch '40GbE' of ↵David S. Miller4-33/+58
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2022-07-22 This series contains updates to i40e and iavf drivers. Przemyslaw adds a helper function for determining whether TC MQPRIO is enabled for i40e. Avinash utilizes the driver's bookkeeping of filters to check for duplicate filter before sending the request to the PF for iavf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: ethernet: mtk-ppe: fix traffic offload with bridged wlanLorenzo Bianconi1-17/+13
A typical flow offload scenario for OpenWrt users is routed traffic received by the wan interface that is redirected to a wlan device belonging to the lan bridge. Current implementation fails to fill wdma offload info in mtk_flow_get_wdma_info() since odev device is the local bridge. Fix the issue running dev_fill_forward_path routine in mtk_flow_get_wdma_info in order to identify the wlan device. Tested-by: Paolo Valerio <pvalerio@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'mlxsw-Spectrum-2-PTP-preparations'David S. Miller8-77/+344
Ido Schimmel says: ==================== mlxsw: Spectrum-2 PTP preparations This patchset includes various preparations required for Spectrum-2 PTP support. Most of the changes are non-functional (e.g., renaming, adding registers). The only intentional user visible change is in patch #10 where the PHC time is initialized to zero in accordance with the recommendation of the PTP maintainer. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum_ptp: Rename mlxsw_sp1_ptp_phc_adjfreq()Amit Cohen1-2/+2
The function mlxsw_sp_ptp_phc_adjfreq() configures MTUTC register to adjust hardware frequency by a given value. This configuration will be same for Spectrum-2. In preparation for Spectrum-2 PTP support, rename the function to not be Spectrum-1 specific. Later, it will be used for Spectrum-2 also. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum_ptp: Rename mlxsw_sp_ptp_get_message_types()Amit Cohen1-5/+6
Spectrum-1 and Spectrum-2 differ in their time stamping capabilities. The former can be configured to time stamp only a subset of received PTP events (e.g., only Sync), whereas the latter will time stamp all PTP events or none. In preparation for Spectrum-2 PTP support, rename the function that parses the hardware time stamping configuration upon %SIOCSHWTSTAMP to be Spectrum-1 specific. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum_ptp: Use 'struct mlxsw_sp_ptp_clock' per ASICAmit Cohen1-31/+44
Currently, there is one shared structure that holds the required structures for PTP clock. Most of the existing fields are relevant only for Spectrum-1 (cycles, timecounter, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes the structures which will be used also for Spectrum-2. This structure will be returned from clock_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum_ptp: Use 'struct mlxsw_sp_ptp_state' per ASICAmit Cohen1-16/+35
Currently, there is one shared structure that holds the required structures and details for PTP. Most of the existing fields are relevant only for Spectrum-1 (hash table, lock for hash table, delayed work, and more). Rename the structure to be specific for Spectrum-1 and align the existing code. Add a common structure which includes 'struct mlxsw_sp *mlxsw_sp' and will be returned from ptp_init() operation, as the definition is shared between all ASICs' operations. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: pci: Simplify FRC clock readingAmit Cohen2-9/+12
Currently, the reading of FRC values (high and low) is done using macro which calls to a function. In addition, to calculate the offset of FRC, a simple macro is used. This code can be simplified by adding an helper function and calculating the offset explicitly instead of using an additional macro for that. Add the helper function and convert the existing code. This helper will be used later to read UTC clock. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum_ptp: Initialize the clock to zero as part of initializationAmit Cohen1-2/+1
As lately recommended in the mailing list[1], set the clock to zero time as part of initialization. The idea is that when the clock reads 'Jan 1, 1970', then it is clearly wrong and user will not mistakenly think that the clock is set correctly. If as part of initialization, the driver sets the clock, user might see correct date and time (maybe with a small shift) and assume that there is no need to sync the clock. Fix the existing code of Spectrum-1 to set the 'timecounter' to zero. [1]: https://lore.kernel.org/netdev/20220201191041.GB7009@hoboy.vegasvil.org/ Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: Rename 'read_frc_capable' bit to 'read_clock_capable'Danielle Ratson3-3/+3
Rename the 'read_frc_capable' bit to 'read_clock_capable' since now it can be both the FRC and UTC clocks. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: resources: Add resource identifier for maximum number of FIDsAmit Cohen1-0/+2
Add a resource identifier for maximum number of FIDs so that it could be later used to query the information from firmware. In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are sent as control packets is not updated at egress port. To overcome this limitation, some packets will be sent as data packets. The header should include FID, which is supposed to be 'Max FID + port - 1'. As preparation, add the required resource, to be able to query the value from firmware later. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: spectrum: Fix the shift of FID field in TX headerDanielle Ratson1-1/+1
Currently, the field FID in TX header is defined, but is not used as it is relevant only for data packets. mlxsw driver currently sends all host-generated traffic as control packets and not as data packets. In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are sent as control packets is not updated at egress port. To overcome this limitation while adding support for PTP, some packets will be sent as data packets. Fix the wrong shift in the definition, to allow using the field later. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: Set time stamp type as part of config profileDanielle Ratson4-1/+38
The type of time stamp field in the CQE is configured via the CONFIG_PROFILE command during driver initialization. Add the definition of the relevant fields to the command's payload and set the type to UTC for Spectrum-2 and above. This configuration can be done as part of the preparations to PTP support, as the type of the time stamp will not break any existing behavior. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: cmd: Add UTC related fields to query firmware commandDanielle Ratson1-0/+26
Add UTC sec and nsec PCI BAR and offset to query firmware command for a future use. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: pci_hw: Add 'time_stamp' and 'time_stamp_type' fields to CQEv2Danielle Ratson1-0/+78
The Completion Queue Element version 2 (CQEv2) includes various metadata fields of packets. Add 'time_stamp' and 'time_stamp_type' fields along with functions to extract the seconds and nanoseconds for a future use. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: reg: Add Monitoring Time Precision Correction Port Configuration RegisterDanielle Ratson1-0/+62
In Spectrum-2, all the packets are time stamped, the MTPCPC register is used to configure the types of packets that will adjust the correction field and which port will trap PTP packets. If ingress correction is set on a port for a given packet type, then when such a packet is received via the port, the current time stamp is subtracted from the correction field. If egress correction is set on a port for a given packet type, then when such a packet is transmitted via the port, the current time stamp is added to the correction field. Assuming the systems is configured correctly, the above means that the correction field will contain the transient delay between the ports. Add this register for a future use in order to support PTP in Spectrum-2. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: reg: Add MTUTC register's fields for supporting PTP in Spectrum-2Danielle Ratson2-4/+31
The MTUTC register configures the HW UTC counter. Add the relevant fields and operations to support PTP in Spectrum-2 and update mlxsw_reg_mtutc_pack() with the new fields for a future use. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25mlxsw: Rename mlxsw_reg_mtptptp_pack() to mlxsw_reg_mtptpt_pack()Danielle Ratson2-4/+4
The right name of the register is MTPTPT, which refers to Monitoring Precision Time Protocol Trap Register. Therefore, rename the function mlxsw_reg_mtptptp_pack() to mlxsw_reg_mtptpt_pack(). Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'master' of ↵David S. Miller9-42/+25
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2022-07-20 1) Don't set DST_NOPOLICY in IPv4, a recent patch made this superfluous. From Eyal Birger. 2) Convert alg_key to flexible array member to avoid an iproute2 compile warning when built with gcc-12. From Stephen Hemminger. 3) xfrm_register_km and xfrm_unregister_km do always return 0 so change the type to void. From Zhengchao Shao. 4) Fix spelling mistake in esp6.c From Zhang Jiaming. 5) Improve the wording of comment above XFRM_OFFLOAD flags. From Petr Vaněk. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'net-sysctl-races-part-6'David S. Miller10-31/+36
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_net_table (Round 6, Final). This series fixes data-races around 11 knobs after tcp_pacing_ss_ratio ipv4_net_table, and this is the final round for ipv4_net_table. While at it, other data-races around these related knobs are fixed. - decnet_mem - decnet_rmem - tipc_rmem There are still 58 tables possibly missing some fixes under net/. $ grep -rnE "struct ctl_table.*?\[\] =" net/ | wc -l 60 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25ipv4: Fix data-races around sysctl_fib_notify_on_flag_change.Kuniyuki Iwashima1-2/+5
While reading sysctl_fib_notify_on_flag_change, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 680aea08e78c ("net: ipv4: Emit notification when fib hardware flags are changed") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix data-races around sysctl_tcp_reflect_tos.Kuniyuki Iwashima2-4/+4
While reading sysctl_tcp_reflect_tos, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: ac8f1710c12b ("tcp: reflect tos value received in SYN to the socket") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Wei Wang <weiwan@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_nr.Kuniyuki Iwashima1-1/+1
While reading sysctl_tcp_comp_sack_nr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 9c21d2fc41c0 ("tcp: add tcp_comp_sack_nr sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_slack_ns.Kuniyuki Iwashima1-1/+1
While reading sysctl_tcp_comp_sack_slack_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: a70437cc09a1 ("tcp: add hrtimer slack to sack compression") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix a data-race around sysctl_tcp_comp_sack_delay_ns.Kuniyuki Iwashima1-1/+2
While reading sysctl_tcp_comp_sack_delay_ns, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6d82aa242092 ("tcp: add tcp_comp_sack_delay_ns sysctl") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: Fix data-races around sysctl_[rw]mem(_offset)?.Kuniyuki Iwashima7-20/+21
While reading these sysctl variables, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - .sysctl_rmem - .sysctl_rwmem - .sysctl_rmem_offset - .sysctl_wmem_offset - sysctl_tcp_rmem[1, 2] - sysctl_tcp_wmem[1, 2] - sysctl_decnet_rmem[1] - sysctl_decnet_wmem[1] - sysctl_tipc_rmem[1] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25tcp: Fix data-races around sk_pacing_rate.Kuniyuki Iwashima1-2/+2
While reading sysctl_tcp_pacing_(ss|ca)_ratio, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 43e122b014c9 ("tcp: refine pacing rate determination") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: mld: fix reference count leak in mld_{query | report}_work()Taehee Yoo1-6/+8
mld_{query | report}_work() processes queued events. If there are too many events in the queue, it re-queue a work. And then, it returns without in6_dev_put(). But if queuing is failed, it should call in6_dev_put(), but it doesn't. So, a reference count leak would occur. THREAD0 THREAD1 mld_report_work() spin_lock_bh() if (!mod_delayed_work()) in6_dev_hold(); spin_unlock_bh() spin_lock_bh() schedule_delayed_work() spin_unlock_bh() Script to reproduce(by Hangbin Liu): ip netns add ns1 ip netns add ns2 ip netns exec ns1 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip netns exec ns2 sysctl -w net.ipv6.conf.all.force_mld_version=1 ip -n ns1 link add veth0 type veth peer name veth0 netns ns2 ip -n ns1 link set veth0 up ip -n ns2 link set veth0 up for i in `seq 50`; do for j in `seq 100`; do ip -n ns1 addr add 2021:${i}::${j}/64 dev veth0 ip -n ns2 addr add 2022:${i}::${j}/64 dev veth0 done done modprobe -r veth ip -a netns del splat looks like: unregister_netdevice: waiting for veth0 to become free. Usage count = 2 leaked reference. ipv6_add_dev+0x324/0xec0 addrconf_notify+0x481/0xd10 raw_notifier_call_chain+0xe3/0x120 call_netdevice_notifiers+0x106/0x160 register_netdevice+0x114c/0x16b0 veth_newlink+0x48b/0xa50 [veth] rtnl_newlink+0x11a2/0x1a40 rtnetlink_rcv_msg+0x63f/0xc00 netlink_rcv_skb+0x1df/0x3e0 netlink_unicast+0x5de/0x850 netlink_sendmsg+0x6c9/0xa90 ____sys_sendmsg+0x76a/0x780 __sys_sendmsg+0x27c/0x340 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd Tested-by: Hangbin Liu <liuhangbin@gmail.com> Fixes: f185de28d9ae ("mld: add new workqueues for process mld events") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'macb-versal-device-support'David S. Miller3-4/+19
Harini Katakam says: ==================== macb: Add Versal compatible string to Macb driver Add Versal device support. v2: - Sort compatible strings alphabetically in DT bindings. - Reorganize new config and CAPS order to be cleaner. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: macb: Update tsu clk usage in runtime suspend/resume for VersalHarini Katakam2-2/+16
On Versal TSU clock cannot be disabled irrespective of whether PTP is used. Hence introduce a new Versal config structure with a "need tsu" caps flag and check the same in runtime_suspend/resume before cutting off clocks. More information on this for future reference: This is an IP limitation on versions 1p11 and 1p12 when Qbv is enabled (See designcfg1, bit 3). However it is better to rely on an SoC specific check rather than the IP version because tsu clk property itself may not represent actual HW tsu clock on some chip designs. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: macb: Sort CAPS flags by bit positionsHarini Katakam1-2/+2
Sort capability flags by the bit position set. Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25dt-bindings: net: cdns,macb: Add versal compatible stringRadhey Shyam Pandey1-0/+1
Add versal compatible string. Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25net: macsec: fix potential resource leak in macsec_add_rxsa() and ↵Jianglei Nie1-2/+2
macsec_add_txsa() init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa-> key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error occurs after init_rx_sa() is called in macsec_add_rxsa(), the function released rx_sa with kfree() without releasing rx_sa->stats and rx_sa-> key.tfm, which will lead to a resource leak. We should call macsec_rxsa_put() instead of kfree() to decrease the ref count of rx_sa and release the relevant resource if the refcount is 0. The same bug exists in macsec_add_txsa() for tx_sa as well. This patch fixes the above two bugs. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25Merge branch 'macsec-config-issues'David S. Miller1-10/+19
Sabrina Dubroca says: ==================== macsec: fix config issues The patch adding netlink support for XPN (commit 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")) introduced several issues, including a kernel panic reported at [1]. Reproducing those bugs with upstream iproute is limited, since iproute doesn't currently support XPN. I'm also working on this. [1] https://bugzilla.kernel.org/show_bug.cgi?id=208315 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: always read MACSEC_SA_ATTR_PN as a u64Sabrina Dubroca1-3/+3
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a u32, sometimes forced into a u64 without checking the actual length of the attribute. Instead, we can use nla_get_u64 everywhere, which will read up to 64 bits into a u64, capped by the actual length of the attribute coming from userspace. This fixes several issues: - the check in validate_add_rxsa doesn't work with 32-bit attributes - the checks in validate_add_txsa and validate_upd_sa incorrectly reject X << 32 (with X != 0) Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: limit replay window size with XPNSabrina Dubroca1-4/+12
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value of the replay window is 2^30-1, to help with recovery of the upper bits of the PN. To avoid leaving the existing macsec device in an inconsistent state if this test fails during changelink, reuse the cleanup mechanism introduced for HW offload. This wasn't needed until now because macsec_changelink_common could not fail during changelink, as modifying the cipher suite was not allowed. Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so that secy->xpn is set. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix error message in macsec_add_rxsa and _txsaSabrina Dubroca1-2/+2
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25macsec: fix NULL deref in macsec_add_rxsaSabrina Dubroca1-1/+2
Commit 48ef50fa866a added a test on tb_sa[MACSEC_SA_ATTR_PN], but nothing guarantees that it's not NULL at this point. The same code was added to macsec_add_txsa, but there it's not a problem because validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is present. Note: it's not possible to reproduce with iproute, because iproute doesn't allow creating an SA without specifying the PN. Fixes: 48ef50fa866a ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)") Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315 Reported-by: Frantisek Sumsal <fsumsal@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25s390/qeth: Fix typo 'the the' in commentSlark Xiao1-1/+1
Replace 'the the' with 'the' in the comment. Signed-off-by: Slark Xiao <slark_xiao@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 22:37:40 +0300