| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Destroy current's io-wq backend and tctx on __io_uring_task_cancel(),
aka exec(). Looks it's not strictly necessary, because it will be done
at some point when the task dies and changes of creds/files/etc. are
handled, but better to do that earlier to free io-wq and not potentially
lock previous mm and other resources for the time being.
It's safe to do because we wait for all requests of the current task to
complete, so no request will use tctx afterwards. Note, that
io_uring_files_cancel() may leave some requests for later reaping, so it
leaves tctx intact, that's ok as the task is dying anyway.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Make sure that we killed an io-wq by the time a task is dead.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We clear the bit marking the ctx task_work as active after having run
the queued work, but we really should be clearing it before. Otherwise
we can hit a tiny race ala:
CPU0 CPU1
io_task_work_add() tctx_task_work()
run_work
add_to_list
test_and_set_bit
clear_bit
already set
and CPU0 will return thinking the task_work is queued, while in reality
it's already being run. If we hit the condition after __tctx_task_work()
found no more work, but before we've cleared the bit, then we'll end up
thinking it's queued and will be run. In reality it is queued, but we
didn't queue the ctx task_work to ensure that it gets run.
Fixes: 7cbf1722d5fc ("io_uring: provide FIFO ordering for task_work")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we put the io-wq from io_uring, we really want it to exit. Provide
a helper that does that for us. Couple that with not having the manager
hold a reference to the 'wq' and the normal SQPOLL exit will tear down
the io-wq context appropriate.
On the io-wq side, our wq context is per task, so only the task itself
is manipulating ->manager and hence it's safe to check and clear without
any extra locking. We just need to ensure that the manager task stays
around, in case it exits.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We want to reuse this completion, and a single complete should do just
fine. Ensure that we park ourselves first if requested, as that is what
lead to the initial deadlock in this area. If we've got someone attempting
to park us, then we can't proceed without having them finish first.
Fixes: 37d1e2e3642e ("io_uring: move SQPOLL thread io-wq forked worker")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
io_uring_try_cancel_requests() matches not only current's requests, but
also of other exiting tasks, so we need to actively cancel them and not
just wait, especially since the function can be called on flush during
do_exit() -> exit_files().
Even if it's not a problem for now, it's much nicer to know that the
function tries to cancel everything it can.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we fail to fork an SQPOLL worker, we can hit cancel, and hence
attempted thread stop, with the thread already being stopped. Ensure
we check for that.
Also guard thread stop fully by the sqd mutex, just like we do for
park.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We are already freeing the wq struct in both spots, so don't put it and
get it freed twice.
Reported-by: syzbot+7bf785eedca35ca05501@syzkaller.appspotmail.com
Fixes: 4fb6ac326204 ("io-wq: improve manager/worker handling over exec")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The manager waits for the workers, hence the manager is always valid if
workers are running. Now also have wq destroy wait for the manager on
exit, so we now everything is gone.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This is a leftover from a different use cases, it's used to wait for
the manager to startup. Rename it as such.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If we're in the process of shutting down the async context, then don't
create new workers if we already have at least the fixed one.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Instead of having to wait separately on workers and manager, just have
the manager wait on the workers. We use an atomic_t for the reference
here, as we need to start at 0 and allow increment from that. Since the
number of workers is naturally capped by the allowed nr of processes,
and that uses an int, there is no risk of overflow.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need to have our worker count updated before continuing, to avoid
cases where we repeatedly think we need a new worker, but a fork is
already in progress.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
Pull ide fix from Jens Axboe:
"This is a leftover fix from 5.11, where I forgot to ship it your way"
* tag 'ide-5.11-2021-02-28' of git://git.kernel.dk/linux-block:
ide/falconide: Fix module unload
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix UNUSED_KSYMS_WHITELIST for Clang LTO
- Make -s builds really silent irrespective of V= option
- Fix build error when SUBLEVEL or PATCHLEVEL is empty
* tag 'kbuild-fixes-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Fix <linux/version.h> for empty SUBLEVEL or PATCHLEVEL again
kbuild: make -s option take precedence over V=1
ia64: remove redundant READELF from arch/ia64/Makefile
kbuild: do not include include/config/auto.conf from adjust_autoksyms.sh
kbuild: fix UNUSED_KSYMS_WHITELIST for Clang LTO
kbuild: lto: add _mcount to list of used symbols
|
|
Pull arch/csky updates from Guo Ren:
"Features:
- add new memory layout 2.5G(user):1.5G(kernel)
- add kmemleak support
- reconstruct VDSO framework: add VDSO with GENERIC_GETTIMEOFDAY,
GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
- add faulthandler_disabled() check
- support (fix) swapon
- add (fix) _PAGE_ACCESSED for default pgprot
- abort uaccess retries upon fatal signal (from arm)
Fixes and optimizations:
- fix perf probe failure
- fix show_regs doesn't contain regs->usp
- remove custom asm/atomic.h implementation
- fix barrier design
- fix futex SMP implementation
- fix asm/cmpxchg.h with correct ordering barrier
- cleanup asm/spinlock.h
- fix PTE global for 2.5:1.5 virtual memory
- remove prologue of page fault handler in entry.S
- fix TLB maintenance synchronization problem
- add show_tlb for CPU_CK860 debug
- fix FAULT_FLAG_XXX param for handle_mm_fault
- fix update_mmu_cache called with user io mapping
- fix do_page_fault parent irq status
- fix a size determination in gpr_get()
- pgtable.h: Coding convention
- kprobe: Fix code in simulate without 'long'
- fix pfn_valid error with wrong max_mapnr
- use free_initmem_default() in free_initmem()
- fix compile error"
* tag 'csky-for-linus-5.12-rc1' of git://github.com/c-sky/csky-linux: (30 commits)
csky: Fixup compile error
csky: use free_initmem_default() in free_initmem()
csky: Fixup pfn_valid error with wrong max_mapnr
csky: Add VDSO with GENERIC_GETTIMEOFDAY, GENERIC_TIME_VSYSCALL, HAVE_GENERIC_VDSO
csky: kprobe: Fixup code in simulate without 'long'
csky: Fixup swapon
csky: pgtable.h: Coding convention
csky: Fixup _PAGE_ACCESSED for default pgprot
csky: remove unused including <linux/version.h>
csky: Fix a size determination in gpr_get()
csky: Reconstruct VDSO framework
csky: mm: abort uaccess retries upon fatal signal
csky: Sync riscv mm/fault.c for easy maintenance
csky: Fixup do_page_fault parent irq status
csky: Add faulthandler_disabled() check
csky: Fixup update_mmu_cache called with user io mapping
csky: Fixup FAULT_FLAG_XXX param for handle_mm_fault
csky: Add show_tlb for CPU_CK860 debug
csky: Fix TLB maintenance synchronization problem
csky: Add kmemleak support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Palmer Dabbelt:
"A pair of patches that slipped through the cracks:
- enable CPU hotplug in the defconfigs
- some cleanups to setup_bootmem
There's also a single fix for some randconfig build failures:
- make NUMA depend on SMP"
* tag 'riscv-for-linus-5.12-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Cleanup setup_bootmem()
RISC-V: Enable CPU Hotplug in defconfigs
RISC-V: Make NUMA depend on SMP
|
|
Pull more SCSI updates from James Bottomley:
"This is a few driver updates (iscsi, mpt3sas) that were still in the
staging queue when the merge window opened (all committed on or before
8 Feb) and some small bug fixes which came in during the merge window
(all committed on 22 Feb)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (30 commits)
scsi: hpsa: Correct dev cmds outstanding for retried cmds
scsi: sd: Fix Opal support
scsi: target: tcmu: Fix memory leak caused by wrong uio usage
scsi: target: tcmu: Move some functions without code change
scsi: sd: sd_zbc: Don't pass GFP_NOIO to kvcalloc
scsi: aic7xxx: Remove unused function pointer typedef ahc_bus_suspend/resume_t
scsi: bnx2fc: Fix Kconfig warning & CNIC build errors
scsi: ufs: Fix a duplicate dev quirk number
scsi: aic79xx: Fix spelling of version
scsi: target: core: Prevent underflow for service actions
scsi: target: core: Add cmd length set before cmd complete
scsi: iscsi: Drop session lock in iscsi_session_chkready()
scsi: qla4xxx: Use iscsi_is_session_online()
scsi: libiscsi: Reset max/exp cmdsn during recovery
scsi: iscsi_tcp: Fix shost can_queue initialization
scsi: libiscsi: Add helper to calculate max SCSI cmds per session
scsi: libiscsi: Fix iSCSI host workq destruction
scsi: libiscsi: Fix iscsi_task use after free()
scsi: libiscsi: Drop taskqueuelock
scsi: libiscsi: Fix iscsi_prep_scsi_cmd_pdu() error handling
...
|
|
Pull more xfs updates from Darrick Wong:
"The most notable fix here prevents premature reuse of freed metadata
blocks, and adding the ability to detect accidental nested
transactions, which are not allowed here.
- Restore a disused sysctl control knob that was inadvertently
dropped during the merge window to avoid fstests regressions.
- Don't speculatively release freed blocks from the busy list until
we're actually allocating them, which fixes a rare log recovery
regression.
- Don't nest transactions when scanning for free space.
- Add an idiot^Wmaintainer light to detect nested transactions. ;)"
* tag 'xfs-5.12-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: use current->journal_info for detecting transaction recursion
xfs: don't nest transactions when scanning for eofblocks
xfs: don't reuse busy extents on extent trim
xfs: restore speculative_cow_prealloc_lifetime sysctl
|
|
Pull more block updates from Jens Axboe:
"A few stragglers (and one due to me missing it originally), and fixes
for changes in this merge window mostly. In particular:
- blktrace cleanups (Chaitanya, Greg)
- Kill dead blk_pm_* functions (Bart)
- Fixes for the bio alloc changes (Christoph)
- Fix for the partition changes (Christoph, Ming)
- Fix for turning off iopoll with polled IO inflight (Jeffle)
- nbd disconnect fix (Josef)
- loop fsync error fix (Mauricio)
- kyber update depth fix (Yang)
- max_sectors alignment fix (Mikulas)
- Add bio_max_segs helper (Matthew)"
* tag 'block-5.12-2021-02-27' of git://git.kernel.dk/linux-block: (21 commits)
block: Add bio_max_segs
blktrace: fix documentation for blk_fill_rw()
block: memory allocations in bounce_clone_bio must not fail
block: remove the gfp_mask argument to bounce_clone_bio
block: fix bounce_clone_bio for passthrough bios
block-crypto-fallback: use a bio_set for splitting bios
block: fix logging on capacity change
blk-settings: align max_sectors on "logical_block_size" boundary
block: reopen the device in blkdev_reread_part
block: don't skip empty device in in disk_uevent
blktrace: remove debugfs file dentries from struct blk_trace
nbd: handle device refs for DESTROY_ON_DISCONNECT properly
kyber: introduce kyber_depth_updated()
loop: fix I/O error on fsync() in detached loop devices
block: fix potential IO hang when turning off io_poll
block: get rid of the trace rq insert wrapper
blktrace: fix blk_rq_merge documentation
blktrace: fix blk_rq_issue documentation
blktrace: add blk_fill_rwbs documentation comment
block: remove superfluous param in blk_fill_rwbs()
...
|
|
Commit 78d3bb4483ba ("kbuild: Fix <linux/version.h> for empty SUBLEVEL
or PATCHLEVEL") fixed the build error for empty SUBLEVEL or PATCHLEVEL
by prepending a zero.
Commit 9b82f13e7ef3 ("kbuild: clamp SUBLEVEL to 255") re-introduced
this issue.
This time, we cannot take the same approach because we have C code:
#define LINUX_VERSION_PATCHLEVEL $(PATCHLEVEL)
#define LINUX_VERSION_SUBLEVEL $(SUBLEVEL)
Replace empty SUBLEVEL/PATCHLEVEL with a zero.
Fixes: 9b82f13e7ef3 ("kbuild: clamp SUBLEVEL to 255")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-and-tested-by: Sasha Levin <sashal@kernel.org>
|
|
'make -s' should be really silent. However, 'make -s V=1' prints noisy
log messages from some shell scripts.
Of course, such a combination is odd, but the build system needs to do
the right thing even if a user gives strange input.
If -s is given, KBUILD_VERBOSE should be forced to 0.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
READELF is defined by the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit cd195bc4775a ("kbuild: split adjust_autoksyms.sh in two parts")
split out the code that needs include/config/auto.conf.
This script no longer needs to include include/config/auto.conf.
Fixes: cd195bc4775a ("kbuild: split adjust_autoksyms.sh in two parts")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit fbe078d397b4 ("kbuild: lto: add a default list of used symbols")
does not work as expected if the .config file has already specified
CONFIG_UNUSED_KSYMS_WHITELIST="my/own/white/list" before enabling
CONFIG_LTO_CLANG.
So, the user-supplied whitelist and LTO-specific white list must be
independent of each other.
I refactored the shell script so CONFIG_MODVERSIONS and CONFIG_CLANG_LTO
handle whitelists in the same way.
Fixes: fbe078d397b4 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
|
|
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull misc vfs updates from Al Viro:
"Assorted stuff pile - no common topic here"
* 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
whack-a-mole: don't open-code iminor/imajor
9p: fix misuse of sscanf() in v9fs_stat2inode()
audit_alloc_mark(): don't open-code ERR_CAST()
fs/inode.c: make inode_init_always() initialize i_ino to 0
vfs: don't unnecessarily clone write access for writable fds
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Three more bugfixes and one revert. I accidently applied one patch too
early"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: exynos5: Preserve high speed master code
Revert "i2c: i2c-qcom-geni: Add shutdown callback for i2c"
i2c: designware: Get right data length
i2c: brcmstb: Fix brcmstd_send_i2c_cmd condition
|
|
: error: C++ style comments are not allowed in ISO C90
// Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
^
error: (this will be reported only once per input file)
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
The existing code is essentially
free_initmem_default()->free_reserved_area() without poisoning.
Note that existing code missed to update the managed page count of the
zone.
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Tested-by: Guo Ren <guoren@kernel.org>
Signed-off-by: Guo Ren <guoren@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
The max_mapnr is the number of PFNs, not absolute PFN offset.
Using set_max_mapnr API instead of setting the value directly.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
|
|
HAVE_GENERIC_VDSO
It could help to reduce the latency of the time-related functions
in user space.
We have referenced arm's and riscv's implementation for the patch.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Vincent Chen <vincent.chen@sifive.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
The type of 'val' is 'unsigned long' in simulate_blz32, so 'val < 0'
can't be true.
Cast 'val' to 'long' here to determine branch token or not,
Fixup instructions: bnezad32, bhsz32, bhz32, blsz32, blz32
Link: https://lore.kernel.org/linux-csky/CAJF2gTQjKXR9gpo06WAWG1aquiT87mATiMGorXs6ChxOxoe90Q@mail.gmail.com/T/#t
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Co-developed-by: Menglong Dong <dong.menglong@zte.com.cn>
Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn>
|
|
Current csky's swappon is broken by wrong swap PTE entry format.
Now redesign the new format for abiv1 & abiv2 and make swappon +
zram work properly on csky machines.
C-SKY PTE has VALID, DIRTY to emulate PRESENT, READ, WRITE, EXEC
attributes. GLOBAL bit is shared by two pages in the same tlb
entry. So we need to keep GLOBAL, VALID, PRESENT zero in swp_pte.
To distinguish PAGE_NONE and swp_pte, we need to use an additional
bit (abiv1 is _PAGE_READ, abiv2 is _PAGE_WRITE).
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
C-SKY page table attributes only have 'Dirty' and 'Valid' to
emulate 'PRESENT, READ, WRITE, EXEC, DIRTY, ACCESSED'.
This patch cleanup unnecessary definition.
Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Cc: Arnd Bergmann <arnd@arndb.de>
|
|
Some randconfig builds fail with undefined references to _mcount
when CONFIG_TRIM_UNUSED_KSYMS is set:
ERROR: modpost: "_mcount" [drivers/tee/optee/optee.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fsi/fsi-occ.ko] undefined!
ERROR: modpost: "_mcount" [drivers/fpga/dfl-pci.ko] undefined!
Since there is already a list of symbols that get generated at link
time, add this one as well.
Fixes: fbe078d397b4 ("kbuild: lto: add a default list of used symbols")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
After the following patches,
commit de043da0b9e7 ("RISC-V: Fix usage of memblock_enforce_memory_limit")
commit 1bd14a66ee52 ("RISC-V: Remove any memblock representing unusable memory area")
commit b10d6bca8720 ("arch, drivers: replace for_each_membock() with for_each_mem_range()")
some logic is useless, kill the mem_start/start/end and unneeded code.
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
The CPU hotplug support has been tested on QEMU, Spike, and SiFive
Unleashed so let's enable it by default in RV32 and RV64 defconfigs.
Signed-off-by: Anup Patel <anup.patel@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
In theory these are orthogonal, but in practice all NUMA systems are
SMP. NUMA && !SMP doesn't build, everyone else is coupling them, and I
don't really see any value in supporting that configuration.
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Suggested-by: Atish Patra <atishp@atishpatra.org>
Reported-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Tested-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
|
|
It's often inconvenient to use BIO_MAX_PAGES due to min() requiring the
sign to be the same. Introduce bio_max_segs() and change BIO_MAX_PAGES to
be unsigned to make it easier for the users.
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Pull documentation fixes from Jonathan Corbet:
"A handful of late-arriving documentation fixes, nothing all that
notable"
* tag 'docs-5.12-2' of git://git.lwn.net/linux:
docs: proc.rst: fix indentation warning
Documentation: cgroup-v2: fix path to example BPF program
docs: powerpc: Fix tables in syscall64-abi.rst
Documentation: features: refresh feature list
Documentation: features: remove c6x references
docs: ABI: testing: ima_policy: Fixed missing bracket
Fix unaesthetic indentation
scripts: kernel-doc: fix array element capture in pointer-to-func parsing
doc: use KCFLAGS instead of EXTRA_CFLAGS to pass flags from command line
Documentation: proc.rst: add more about the 6 fields in loadavg
|
|
Pull OpenRISC updates from Stafford Horne:
- Update for Litex SoC controller to support wider width registers as
well as reset.
- Refactor SMP code to use device tree to define possible cpus.
- Update build including generating vmlinux.bin
* tag 'for-linus' of git://github.com/openrisc/linux:
openrisc: Use devicetree to determine present cpus
drivers/soc/litex: Add restart handler
openrisc: add arch/openrisc/Kbuild
drivers/soc/litex: make 'litex_[set|get]_reg()' methods private
drivers/soc/litex: support 32-bit subregisters, 64-bit CPUs
drivers/soc/litex: s/LITEX_REG_SIZE/LITEX_SUBREG_ALIGN/g
drivers/soc/litex: separate MMIO from subregister offset calculation
drivers/soc/litex: move generic accessors to litex.h
openrisc: restart: Call common handlers before hanging
openrisc: Add vmlinux.bin target
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Fix physical vs virtual confusion in some basic mm macros and
routines. Caused by __pa == __va on s390 currently.
- Get rid of on-stack cpu masks.
- Add support for complete CPU counter set extraction.
- Add arch_irq_work_raise implementation.
- virtio-ccw revision and opcode fixes.
* tag 's390-5.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cpumf: Add support for complete counter set extraction
virtio/s390: implement virtio-ccw revision 2 correctly
s390/smp: implement arch_irq_work_raise()
s390/topology: move cpumasks away from stack
s390/smp: smp_emergency_stop() - move cpumask away from stack
s390/smp: __smp_rescan_cpus() - move cpumask away from stack
s390/smp: consolidate locking for smp_rescan()
s390/mm: fix phys vs virt confusion in vmem_*() functions family
s390/mm: fix phys vs virt confusion in pgtable allocation routines
s390/mm: fix invalid __pa() usage in pfn_pXd() macros
s390/mm: make pXd_deref() macros return a pointer
s390/opcodes: rename selhhhr to selfhr
|
|
Pull cifs updates from Steve French:
- improvements to mode bit conversion, chmod and chown when using
cifsacl mount option
- two new mount options for controlling attribute caching
- improvements to crediting and reconnect, improved debugging
- reconnect fix
- add SMB3.1.1 dialect to default dialects for vers=3
* tag '5.12-smb3-part1' of git://git.samba.org/sfrench/cifs-2.6: (27 commits)
cifs: update internal version number
cifs: use discard iterator to discard unneeded network data more efficiently
cifs: introduce helper for finding referral server to improve DFS target resolution
cifs: check all path components in resolved dfs target
cifs: fix DFS failover
cifs: fix nodfs mount option
cifs: fix handling of escaped ',' in the password mount argument
cifs: Add new parameter "acregmax" for distinct file and directory metadata timeout
cifs: convert revalidate of directories to using directory metadata cache timeout
cifs: Add new mount parameter "acdirmax" to allow caching directory metadata
cifs: If a corrupted DACL is returned by the server, bail out.
cifs: minor simplification to smb2_is_network_name_deleted
TCON Reconnect during STATUS_NETWORK_NAME_DELETED
cifs: cleanup a few le16 vs. le32 uses in cifsacl.c
cifs: Change SIDs in ACEs while transferring file ownership.
cifs: Retain old ACEs when converting between mode bits and ACL.
cifs: Fix cifsacl ACE mask for group and others.
cifs: clarify hostname vs ip address in /proc/fs/cifs/DebugData
cifs: change confusing field serverName (to ip_addr)
cifs: Fix inconsistent IS_ERR and PTR_ERR
...
|
|
Pull more io_uring updates from Jens Axboe:
"A collection of later fixes that we should get into this release:
- Series of submission cleanups (Pavel)
- A few fixes for issues from earlier this merge window (Pavel, me)
- IOPOLL resubmission fix
- task_work locking fix (Hao)"
* tag 'for-5.12/io_uring-2021-02-25' of git://git.kernel.dk/linux-block: (25 commits)
Revert "io_uring: wait potential ->release() on resurrect"
io_uring: fix locked_free_list caches_free()
io_uring: don't attempt IO reissue from the ring exit path
io_uring: clear request count when freeing caches
io_uring: run task_work on io_uring_register()
io_uring: fix leaving invalid req->flags
io_uring: wait potential ->release() on resurrect
io_uring: keep generic rsrc infra generic
io_uring: zero ref_node after killing it
io_uring: make the !CONFIG_NET helpers a bit more robust
io_uring: don't hold uring_lock when calling io_run_task_work*
io_uring: fail io-wq submission from a task_work
io_uring: don't take uring_lock during iowq cancel
io_uring: fail links more in io_submit_sqe()
io_uring: don't do async setup for links' heads
io_uring: do io_*_prep() early in io_submit_sqe()
io_uring: split sqe-prep and async setup
io_uring: don't submit link on error
io_uring: move req link into submit_state
io_uring: move io_init_req() into io_submit_sqe()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb updates from Konrad Rzeszutek Wilk:
"Two memory encryption related patches (SWIOTLB is enabled by default
for AMD-SEV):
- Add support for alignment so that NVME can properly work
- Keep track of requested DMA buffers length, as underlaying hardware
devices can trip SWIOTLB to bounce too much and crash the kernel
And a tiny fix to use proper APIs in drivers"
* 'stable/for-linus-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Validate bounce size in the sync/unmap path
nvme-pci: set min_align_mask
swiotlb: respect min_align_mask
swiotlb: don't modify orig_addr in swiotlb_tbl_sync_single
swiotlb: refactor swiotlb_tbl_map_single
swiotlb: clean up swiotlb_tbl_unmap_single
swiotlb: factor out a nr_slots helper
swiotlb: factor out an io_tlb_offset helper
swiotlb: add a IO_TLB_SIZE define
driver core: add a min_align_mask field to struct device_dma_parameters
sdhci: stop poking into swiotlb internals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds
Pull LED updates from Pavel Machek:
"Besides the usual fixes and new drivers, we are changing CLASS_FLASH
to return success to make it easier to work with V4L2 stuff disabled,
and we are getting rid of enum that should have been plain integer
long time ago. I'm slightly nervous about potential warnings, but it
needed to be fixed at some point"
* tag 'leds-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds:
leds: lp50xx: Get rid of redundant explicit casting
leds: lp50xx: Update headers block to reflect reality
leds: lp50xx: Get rid of redundant check in lp50xx_enable_disable()
leds: lp50xx: Reduce level of dereferences
leds: lp50xx: Switch to new style i2c-driver probe function
leds: lp50xx: Don't spam logs when probe is deferred
leds: apu: extend support for PC Engines APU1 with newer firmware
leds: flash: Fix multicolor no-ops registration by return 0
leds: flash: Add flash registration with undefined CONFIG_LEDS_CLASS_FLASH
leds: lgm: Add LED controller driver for LGM SoC
dt-bindings: leds: Add bindings for Intel LGM SoC
leds: led-core: Get rid of enum led_brightness
leds: gpio: Set max brightness to 1
leds: lm3533: Switch to using the new API kobj_to_dev()
leds: ss4200: simplify the return expression of register_nasgpio_led()
leds: Use DEVICE_ATTR_{RW, RO, WO} macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull pcmcia update from Dominik Brodowski:
"Improve the use of the kobj API in the core of the Linux PCMCIA
subsystem"
* 'pcmcia-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux:
pcmcia: Switch to using the new API kobj_to_dev()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"A handful of new RISC-V related patches for this merge window:
- A check to ensure drivers are properly using uaccess. This isn't
manifesting with any of the drivers I'm currently using, but may
catch errors in new drivers.
- Some preliminary support for the FU740, along with the HiFive
Unleashed it will appear on.
- NUMA support for RISC-V, which involves making the arm64 code
generic.
- Support for kasan on the vmalloc region.
- A handful of new drivers for the Kendryte K210, along with the DT
plumbing required to boot on a handful of K210-based boards.
- Support for allocating ASIDs.
- Preliminary support for kernels larger than 128MiB.
- Various other improvements to our KASAN support, including the
utilization of huge pages when allocating the KASAN regions.
We may have already found a bug with the KASAN_VMALLOC code, but it's
passing my tests. There's a fix in the works, but that will probably
miss the merge window.
* tag 'riscv-for-linus-5.12-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (75 commits)
riscv: Improve kasan population by using hugepages when possible
riscv: Improve kasan population function
riscv: Use KASAN_SHADOW_INIT define for kasan memory initialization
riscv: Improve kasan definitions
riscv: Get rid of MAX_EARLY_MAPPING_SIZE
soc: canaan: Sort the Makefile alphabetically
riscv: Disable KSAN_SANITIZE for vDSO
riscv: Remove unnecessary declaration
riscv: Add Canaan Kendryte K210 SD card defconfig
riscv: Update Canaan Kendryte K210 defconfig
riscv: Add Kendryte KD233 board device tree
riscv: Add SiPeed MAIXDUINO board device tree
riscv: Add SiPeed MAIX GO board device tree
riscv: Add SiPeed MAIX DOCK board device tree
riscv: Add SiPeed MAIX BiT board device tree
riscv: Update Canaan Kendryte K210 device tree
dt-bindings: add resets property to dw-apb-timer
dt-bindings: fix sifive gpio properties
dt-bindings: update sifive uart compatible string
dt-bindings: update sifive clint compatible string
...
|
