| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This fixes a few issues reported by ShellCheck:
- SC2068: Double quote array expansions to avoid re-splitting elements.
- SC2206: Quote to prevent word splitting/globbing, or split robustly
with mapfile or read -a.
- SC2166: Prefer [ p ] && [ q ] as [ p -a q ] is not well defined.
- SC2155: Declare and assign separately to avoid masking return values.
- SC2162: read without -r will mangle backslashes.
- SC2219: Instead of 'let expr', prefer (( expr )) .
- SC2181: Check exit code directly with e.g. 'if mycmd;', not indirectly
with $?.
- SC2236: Use -n instead of ! -z.
- SC2004: $/${} is unnecessary on arithmetic variables.
- SC2012: Use find instead of ls to better handle non-alphanumeric
filenames.
- SC2002: Useless cat. Consider 'cmd < file | ..' or 'cmd file | ..'
instead.
SC2086 (Double quotes to prevent globbing and word splitting) is ignored
because it is controlled for the moment and there are too many to
change.
While at it, also fixed the alignment in one comment.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As explained on ShellCheck's wiki [1], it is recommended to avoid
backquotes `...` in favour of parenthesis $(...):
> Backtick command substitution `...` is legacy syntax with several
> issues.
>
> - It has a series of undefined behaviors related to quoting in POSIX.
> - It imposes a custom escaping mode with surprising results.
> - It's exceptionally hard to nest.
>
> $(...) command substitution has none of these problems, and is
> therefore strongly encouraged.
[1] https://www.shellcheck.net/wiki/SC2006
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some vars are redefined in different places. Best to avoid this
classical Bash pitfall where variables are accidentally overridden by
other functions because the proper scope has not been defined.
Most issues are with loops: typically 'i' is used in for-loops but if it
is not global, calling a function from a for-loop also doing a for-loop
with the same non local 'i' variable causes troubles because the first
'i' will be assigned to another value. To prevent such issues, the
iterator variable is now declared as local just before the loop. If it
is always done like this, issues are avoided.
To distinct between local and non local variables, all non local ones
are defined at the beginning of the script. The others are now defined
with the "local" keyword.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This is more readable and reduces duplicated commands.
This might also be useful to add v6 support and switch to nftables.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
With ~100 tests, it helps to have this summary at the end not to scroll
to find which one has failed.
It is especially interseting when looking at the output produced by the
CI where the kernel logs from the serial are mixed together.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Running a specific test by giving the ID is often what we want: the CI
reports an issue with the Nth test, it is reproducible with:
./mptcp_join.sh N
But this might not work when there is a need to find which commit has
introduced a regression making a test unstable: failing from time to
time. Indeed, a specific test is not attached to one ID: the ID is in
fact a counter. It means the same test can have a different ID if other
tests have been added/removed before this unstable one.
Remembering the current test can also help listing failed tests at the
end.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Often, it is needed to run one specific test.
There are options to run subgroups of tests but when only one fails, no
need to run all the subgroup. So far, the solution was to edit the
script to comment the tests that are not needed but that's not ideal.
Now, it is possible to run one specific test by giving the ID of the
tests that are going to be validated, e.g.
./mptcp_join.sh 36 37
This is cleaner and saves time.
Technically, the reset* functions now return 0 if the test can be
executed. This naturally creates sections per test in the code which is
also helpful to understand what a test is exactly doing.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Best to always reset this env var before each test to avoid surprising
behaviour depending on the order tests are running.
Also clearly set it for the last failing links test is also needed when
only this test is executed.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When adding a new tests group, it has to be defined in multiple places:
- in the all_tests() function
- in the 'usage()' function
- in the getopts: short option + what to do when the option is used
Because it is easy to forget one of them, it is useful to have to define
them only once.
Note: only using an associative array would simplify the code but the
entries are stored in a hashtable and iterating over the different items
doesn't give the same order as the one used in the declaration of this
array. Because we want to run these tests in the same order as before, a
"simple" array is used first.
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch dropped the msg argument of chk_csum_nr, to unify chk_csum_nr
with other chk_*_nr functions.
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MISR1 was cleared twice but the original author intention was probably
to clear MISR1 & MISR2 to completely disable interrupts. Fix it to
clear MISR2.
Fixes: 87461f7a58ab ("net: phy: DP83822 initial driver submission")
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220309142228.761153-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The of_find_compatible_node() function returns a node pointer with
refcount incremented, We should use of_node_put() on it when done
Add the missing of_node_put() to release the refcount.
Fixes: 7349a74ea75c ("net: ethernet: gianfar_ethtool: get phc index through drvdata")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Link: https://lore.kernel.org/r/20220310015313.14938-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Here is a third set of fixes for the soc tree, well within the
expected set of changes.
Maintainer list changes:
- Krzysztof Kozlowski and Jisheng Zhang both have new email addresses
- Broadcom iProc has a new git tree
Regressions:
- Robert Foss sends a revert for a Mediatek DPI bridge patch that
caused an inadvertent break in the DT binding
- mstar timers need to be included in Kconfig
Devicetree fixes for:
- Aspeed ast2600 spi pinmux
- Tegra eDP panels on Nyan FHD
- Tegra display IOMMU
- Qualcomm sm8350 UFS clocks
- minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm
sm8450, and Broadcom BCM2711"
* tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
MAINTAINERS: Update Jisheng's email address
Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"
dt-bindings: drm/bridge: anx7625: Revert DPI support
ARM: dts: aspeed: Fix AST2600 quad spi group
MAINTAINERS: update Krzysztof Kozlowski's email
MAINTAINERS: Update git tree for Broadcom iProc SoCs
ARM: tegra: Move Nyan FHD panels to AUX bus
arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias
ARM: mstar: Select HAVE_ARM_ARCH_TIMER
soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel
arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint
ARM: boot: dts: bcm2711: Fix HVS register range
arm64: dts: qcom: c630: disable crypto due to serror
arm64: dts: qcom: sm8450: fix apps_smmu interrupts
arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb
arm64: dts: qcom: sm8350: Correct UFS symbol clocks
arm64: tegra: Disable ISO SMMU for Tegra194
Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
|
|
Instead of using GUP, make fault_in_safe_writeable() actually force a
'handle_mm_fault()' using the same fixup_user_fault() machinery that
futexes already use.
Using the GUP machinery meant that fault_in_safe_writeable() did not do
everything that a real fault would do, ranging from not auto-expanding
the stack segment, to not updating accessed or dirty flags in the page
tables (GUP sets those flags on the pages themselves).
The latter causes problems on architectures (like s390) that do accessed
bit handling in software, which meant that fault_in_safe_writeable()
didn't actually do all the fault handling it needed to, and trying to
access the user address afterwards would still cause faults.
Reported-and-tested-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: cdd591fc86e3 ("iov_iter: Introduce fault_in_iov_iter_writeable")
Link: https://lore.kernel.org/all/CAHc6FU5nP+nziNGG0JAF1FUx-GV7kKFvM7aZuU_XD2_1v4vnvg@mail.gmail.com/
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.17 (part 2)
Allow using old PCIe card on Armada 37xx
* tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0
Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptop
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Legacy and old PCI I/O based cards do not support 32-bit I/O addressing.
Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from
'ranges' DT property") kernel can set different PCIe address on CPU and
different on the bus for the one A37xx address mapping without any firmware
support in case the bus address does not conflict with other A37xx mapping.
So remap I/O space to the bus address 0x0 to enable support for old legacy
I/O port based cards which have hardcoded I/O ports in low address space.
Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O
space can be set to address 0x0 too because MEM space and I/O space are
separate and so do not conflict.
Remapping IO space on Turris Mox to different address is not possible to
due bootloader bug.
Signed-off-by: Pali Rohár <pali@kernel.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700")
Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property")
Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix for type conversion issues when working out maximum
scatter/gather segment sizes.
It caused problems for some systems where the limits overflow
due to the type conversion"
* tag 'spi-fix-v5.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix invalid sgs value
|
|
The kernel test robot discovered that building without
HARDEN_BRANCH_PREDICTOR issues a warning due to a missing
argument to pr_info().
Add the missing argument.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 9dd78194a372 ("ARM: report Spectre v2 status through sysfs")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- fix a probe failure for Tegra241 GPIO controller in gpio-tegra186
- revert changes that caused a regression in the sysfs user-space
interface
- correct the debounce time conversion in GPIO ACPI
- statify a struct in gpio-sim and fix a typo
- update registers in correct order (hardware quirk) in gpio-ts4900
* tag 'gpio-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix a typo
gpio: ts4900: Do not set DAT and OE together
gpio: sim: Declare gpio_sim_hog_config_item_ops static
gpiolib: acpi: Convert ACPI value of debounce to microseconds
gpio: Revert regression in sysfs-gpio (gpiolib.c)
gpio: tegra186: Add IRQ per bank for Tegra241
|
|
Just noticed this when applying Andy's patch. s/childred/children/
Fixes: cb8c474e79be ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
This works around an issue with the hardware where both OE and
DAT are exposed in the same register. If both are updated
simultaneously, the harware makes no guarantees that OE or DAT
will actually change in any given order and may result in a
glitch of a few ns on a GPIO pin when changing direction and value
in a single write.
Setting direction to input now only affects OE bit. Setting
direction to output updates DAT first, then OE.
Fixes: 9c6686322d74 ("gpio: add Technologic I2C-FPGA gpio support")
Signed-off-by: Mark Featherston <mark@embeddedTS.com>
Signed-off-by: Kris Bahnsen <kris@embeddedTS.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
Add support for ABE CAN Debugger devices using the gs_usb driver.
Link: https://lore.kernel.org/all/20220309124132.291861-22-mkl@pengutronix.de
Signed-off-by: Ben Evans <benny.j.evans92@gmail.com>
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Add support for Christ Electronic Systems GmbH
CANext FD devices using the gs_usb driver.
Link: https://lore.kernel.org/all/20220309124132.291861-21-mkl@pengutronix.de
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For example CANext FD needs to distinguish between bittiming constants
valid for arbitration phase and data phase to reach maximum
performance at higher speeds.
Link: https://lore.kernel.org/all/20220309124132.291861-20-mkl@pengutronix.de
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Christoph Möhring <cmoehring@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The CANtact Pro from LinkLayer Labs is based on the LPC54616 µC, which
is affected by the NXP LPC USB transfer erratum. However, the current
firmware (version 2) doesn't set the
GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX bit.
This patch sets the feature GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX to
workaround this issue.
For the GS_USB_BREQ_DATA_BITTIMING USB control message the CANtact Pro
firmware uses a request value, which is already used by the
candleLight firmware for a different purpose
(GS_USB_BREQ_GET_USER_ID).
This patch set the feature GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO to
workaround this issue.
Link: https://lore.kernel.org/all/20220309124132.291861-19-mkl@pengutronix.de
Cc: Ryan Edwards <ryan.edwards@gmail.com>
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Christoph Möhring <cmoehring@christ-es.de>
[mkl: improve check for CANtact Pro and add GS_CAN_FEATURE_QUIRK_BREQ_CANTACT_PRO quirk]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
For the GS_USB_BREQ_DATA_BITTIMING USB control message the CANtact Pro
firmware uses a request value, which is already used by the
candleLight firmware for a different
purpose (GS_USB_BREQ_GET_USER_ID).
This patch adds a quirk to use the CANtact Pro's value for the
GS_USB_BREQ_DATA_BITTIMING USB control message instead of the official
one.
Link: https://lore.kernel.org/all/20220309124132.291861-18-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce a workaround for a NXP chip errata on LPC546xx
controllers (Errata sheet LPC546xx / USB.15).
According to the document corruption can occur when the following
conditions are met:
* A TX (IN) transfer happens after a RX (OUT) transfer.
* The RX (OUT) transfer length is 4 + N * 16 (N >= 0) bytes.
Even though the struct gs_host_frame has a size of 76 bytes for a FD
frame, which does not apply to the above rule, corruption could be
seen.
Adding a dummy byte to break the second condition also on transfer
lengths with 4 + N * 8 bytes reliably circumvents USB transfer data
corruption.
The firmware can now request this quirk by setting
GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX.
Link: https://lore.kernel.org/all/20220309124132.291861-17-mkl@pengutronix.de
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Christoph Möhring <cmoehring@christ-es.de>
Signed-off-by: Alexander Schartner <aschartner@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
CANtact Pro from Linklayer is the first gs_usb compatible device
supporting CAN-FD with a different HW and re-written candlelight FW.
Support for CAN-FD is indicated by the device setting the
GS_CAN_FEATURE_FD flag. CAN-FD support is requested by the driver with
the GS_CAN_MODE_FD flag. The CAN-FD specific data bit timing
parameters are set with the GS_USB_BREQ_DATA_BITTIMING control
message.
This patch is based on the Eric Evenchick's gs_usb_fd driver (which
itself is a fork of gs_usb). The gs_usb_fd code base was reintegrated
into the gs_usb driver, and reworked to not break the existing
classical-CAN only hardware.
Link: https://lore.kernel.org/all/20220309124132.291861-16-mkl@pengutronix.de
Link: https://github.com/linklayer/gs_usb_fd/issues/2
Co-developed-by: Eric Evenchick <eric@evenchick.com>
Signed-off-by: Eric Evenchick <eric@evenchick.com>
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Modify struct gs_host_frame to make use of a union and
DECLARE_FLEX_ARRAY to be able to store different data (lengths), which
will be added in later commits.
Store the gs_host_frame length in TX direction (host -> device) in
struct gs_can::hf_size_tx and RX direction (device -> host) in struct
gs_usb::hf_size_rx so it must be calculated only once.
Link: https://lore.kernel.org/all/20220309124132.291861-15-mkl@pengutronix.de
Signed-off-by: Peter Fink <pfink@christ-es.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Some STM32G3 chips support up to 3 CAN-FD channels, increase number of
supported channels in this driver to 3 accordingly.
Link: https://lore.kernel.org/all/20220309124132.291861-14-mkl@pengutronix.de
Suggested-by: Ryan Edwards <ryan.edwards@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Introduce the variable udev in the gs_usb_probe() function to hold a
pointer to the struct usb_device. This avoids recalculating the value
several times in this function.
Link: https://lore.kernel.org/all/20220309124132.291861-13-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The widely used open source firmware candleLight supports padding the
USB packets to max packet size to improve performance on Windows
systems.
This patch documents the bit.
Link: https://lore.kernel.org/all/20220309124132.291861-12-mkl@pengutronix.de
Link: https://github.com/candle-usb/candleLight_fw/pull/7
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The widely used open source firmware candleLight has optional support
for reading/writing of an user defined value into the device's flash.
This is indicated by the GS_CAN_FEATURE_USER_ID feature. The
corresponding request are GS_USB_BREQ_GET_USER_ID and
GS_USB_BREQ_SET_USER_ID.
This patch documents these values.
Link: https://lore.kernel.org/all/20220309124132.291861-11-mkl@pengutronix.de
Link: https://github.com/candle-usb/candleLight_fw/commit/1453d70dc9a9d98ac254893ba5114b8e826e0e39
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
In the binary interface a feature bit might have a corresponding mode
bit (of the same value).
The GS_CAN_FEATURE_IDENTIFY feature doesn't come with a mode. Document
this, to avoid gaps when adding more features/modes later.
Link: https://lore.kernel.org/all/20220309124132.291861-10-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Newer versions of the widely used open source firmware candleLight
support hardware timestamps. The support is activated by setting the
GS_CAN_MODE_HW_TIMESTAMP in the GS_USB_BREQ_MODE request.
Although timestamp support is not yet supported by this driver, add
the missing bit for documentation purpose.
Link: https://lore.kernel.org/all/20220309124132.291861-9-mkl@pengutronix.de
Link: https://github.com/candle-usb/candleLight_fw/commit/44431f4a4354a878fbd15b273bf04fce1dcdff7e
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
bt_const->feature
This patch moves the call to SET_NETDEV_DEV() after all handling
(including cleanup) of the bt_const->feature is done. This looks more
consistent.
Link: https://lore.kernel.org/all/20220309124132.291861-8-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch rewraps the arguments of usb_control_msg() and
usb_fill_bulk_urb() to make full use of the standard line length of 80
characters.
Link: https://lore.kernel.org/all/20220309124132.291861-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch rewraps the arguments of netdev_err() to make full use of
the standard line length of 80 characters.
Link: https://lore.kernel.org/all/20220309124132.291861-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch converts the driver to use BIT() to define flags.
Link: https://lore.kernel.org/all/20220309124132.291861-5-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch sorts the include files alphabetically.
Link: https://lore.kernel.org/all/20220309124132.291861-4-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
This patch fixes a checkpatch warning by converting a "unsigned" into
an "unsigned int".
Link: https://lore.kernel.org/all/20220309124132.291861-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With this patch a consistent one space indention throughout the whole
driver is used.
Link: https://lore.kernel.org/all/20220309124132.291861-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Adds support for the CANFD IP variant in the V3U SoC.
Differences to controllers in other SoCs are limited to an increase in
the number of channels from two to eight, an absence of dedicated
registers for "classic" CAN mode, and a number of differences in magic
numbers (register offsets and layouts).
Inspired by BSP patch by Kazuya Mizuguchi.
Link: https://lore.kernel.org/all/20220309162609.3726306-2-uli+renesas@fpond.eu
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Document support for rcar_canfd on R8A779A0 (V3U) SoCs.
Link: https://lore.kernel.org/all/20220309162609.3726306-5-uli+renesas@fpond.eu
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
calling es58x_check_msg_len()
Function es58x_fd_rx_event() invokes the es58x_check_msg_len() macro:
| ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
While doing so, it dereferences an uninitialized
variable: *rx_event_msg.
This is actually harmless because es58x_check_msg_len() only uses
preprocessor macros (sizeof() and __stringify()) on
*rx_event_msg. c.f. [1].
Nonetheless, this pattern is confusing so the lines are reordered to
make sure that rx_event_msg is correctly initialized.
This patch also fixes a false positive warning reported by cppcheck:
| cppcheck possible warnings: (new ones prefixed by >>, may not be real problems)
|
| In file included from drivers/net/can/usb/etas_es58x/es58x_fd.c:
| >> drivers/net/can/usb/etas_es58x/es58x_fd.c:174:8: warning: Uninitialized variable: rx_event_msg [uninitvar]
| ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len);
| ^
[1] https://elixir.bootlin.com/linux/v5.16/source/drivers/net/can/usb/etas_es58x/es58x_core.h#L467
Link: https://lore.kernel.org/all/20220306101302.708783-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The vxcan driver provides a pair of virtual CAN interfaces to exchange
CAN traffic between different namespaces - analogue to veth.
In opposite to the vcan driver the local sent CAN traffic on this interface
is not echo'ed back but only sent to the remote peer. This is unusual and
can be easily fixed by removing IFF_ECHO from the netdevice flags that
are set for vxcan interfaces by default at startup.
Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed
in af_can.c in can_send(). This patch makes vxcan interfaces adopt the
same local echo behavior and procedures as known from the vcan interfaces.
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Link: https://lore.kernel.org/all/20220309120416.83514-5-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
With can_create_echo_skb() the skb which is forwarded to the peer CAN
interface shares the sk pointer from the originating socket.
This makes the CAN frame show up in the peer namespace as a TX packet.
With the use of skb_clone() analogue to the handling in gw.c the peer
skb gets a new start in the peer namespace and correctly appears as
a RX packet.
Link: https://lore.kernel.org/all/20220309120416.83514-4-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The reason to extend the max PDU size from 4095 Byte (12 bit length value)
to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte
bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel
implementation was set to 8200 Bytes to be able to test the length
information escape sequence.
It turns out that the demand for 64 kByte PDUs is real so the value for
MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums
to the 65.536 Byte block.
Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1056142301
Link: https://lore.kernel.org/all/20220309120416.83514-3-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
The N_As value describes the time a CAN frame needs on the wire when
transmitted by the CAN controller. Even very short CAN FD frames need
arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s).
Having N_As to be zero (the former default) leads to 'no CAN frame
separation' when STmin is set to zero by the receiving node. This 'burst
mode' should not be enabled by default as it could potentially dump a high
number of CAN frames into the netdev queue from the soft hrtimer context.
This does not affect the system stability but is just not nice and
cooperative.
With this N_As/frame_txtime value the 'burst mode' is disabled by default.
As user space applications usually do not set the frame_txtime element
of struct can_isotp_options the new in-kernel default is very likely
overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked.
To make sure that a N_As value of zero is only set intentional the
value '0' is now interpreted as 'do not change the current value'.
When a frame_txtime of zero is required for testing purposes this
CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime.
Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
|
Instead of dumping the CAN frames into the netdevice queue the process to
transmit consecutive frames (CF) now waits for the frame to be transmitted
and therefore echo'ed from the CAN interface.
Link: https://lore.kernel.org/all/20220309120416.83514-1-socketcan@hartkopp.net
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
