summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-30ipv6: Ensure natural alignment of const ipv6 loopback and router addressesHelge Deller1-7/+14
On a parisc64 kernel I sometimes notice this kernel warning: Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8 The address 0x40ff8814 points to the in6addr_linklocal_allrouters variable and the warning simply means that some ipv6 function tries to read a 64-bit word directly from the not-64-bit aligned in6addr_linklocal_allrouters variable. Unaligned accesses are non-critical as the architecture or exception handlers usually will fix it up at runtime. Nevertheless it may trigger a performance penality for some architectures. For details read the "unaligned-memory-access" kernel documentation. The patch below ensures that the ipv6 loopback and router addresses will always be naturally aligned. This prevents the unaligned accesses for all architectures. Signed-off-by: Helge Deller <deller@gmx.de> Fixes: 034dfc5df99eb ("ipv6: export in6addr_loopback to modules") Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-30xfs: remove conditional building of rt geometry validator functionsDarrick J. Wong7-30/+30
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64 variant of the djwong-wtf git branch. Unfortunately, it took me a good hour to figure out that RT wasn't built because this is what got printed to dmesg: XFS (sda2): realtime geometry sanity check failed XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0 Whereas I would have expected: XFS (sda2): Not built with CONFIG_XFS_RT XFS (sda2): RT mount failed The root cause of these problems is the conditional compilation of the new functions xfs_validate_rtextents and xfs_compute_rextslog that I introduced in the two commits listed below. The !RT versions of these functions return false and 0, respectively, which causes primary superblock validation to fail, which explains the first message. Move the two functions to other parts of libxfs that are not conditionally defined by CONFIG_XFS_RT and remove the broken stubs so that validation works again. Fixes: e14293803f4e ("xfs: don't allow overly small or large realtime volumes") Fixes: a6a38f309afc ("xfs: make rextslog computation consistent with mkfs") Signed-off-by: "Darrick J. Wong" <djwong@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-01-30drm/hwmon: Fix abi doc warningsBadal Nilawar2-14/+14
This fixes warnings in xe, i915 hwmon docs: Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52 Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65 Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30 Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22 Use a path containing the driver name to differentiate the documentation of each entry. Fixes: fb1b70607f73 ("drm/xe/hwmon: Expose power attributes") Fixes: 92d44a422d0d ("drm/xe/hwmon: Expose card reactive critical power") Fixes: fbcdc9d3bf58 ("drm/xe/hwmon: Expose input voltage attribute") Fixes: 71d0a32524f9 ("drm/xe/hwmon: Expose hwmon energy attribute") Fixes: 4446fcf220ce ("drm/xe/hwmon: Expose power1_max_interval") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/all/20240125113345.291118ff@canb.auug.org.au/ Signed-off-by: Badal Nilawar <badal.nilawar@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240127165040.2348009-1-badal.nilawar@intel.com
2024-01-30Merge tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggyLinus Torvalds1-7/+1
Pull jfs fix from David Kleikamp: "Revert a bad sanity check" * tag 'jfs-6.8-rc3' of github.com:kleikamp/linux-shaggy: Revert "jfs: fix shift-out-of-bounds in dbJoin"
2024-01-30Merge tag 'trace-v6.8-rc1-2' of ↵Linus Torvalds3-41/+4
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fixes from Steven Rostedt: "Two small fixes for tracefs and eventfs: - Fix register_snapshot_trigger() on allocation error If the snapshot fails to allocate, the register_snapshot_trigger() can still return success. If the call to tracing_alloc_snapshot_instance() returned anything but 0, it returned 0, but it should have been returning the error code from that allocation function. - Remove leftover code from tracefs doing a dentry walk on remount. The update_gid() function was called by the tracefs code on remount to update the gid of eventfs, but that is no longer the case, but that code wasn't deleted. Nothing calls it. Remove it" * tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracefs: remove stale 'update_gid' code tracing/trigger: Fix to return error if failed to alloc snapshot
2024-01-30selftests: net: add missing config for nftables-backed iptablesJakub Kicinski1-0/+1
Modern OSes use iptables implementation with nf_tables as a backend, e.g.: $ iptables -V iptables v1.8.8 (nf_tables) Pablo points out that we need CONFIG_NFT_COMPAT to make that work, otherwise we see a lot of: Warning: Extension DNAT revision 0 not supported, missing kernel module? with DNAT being just an example here, other modules we need include udp, TTL, length etc. Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30net: dsa: qca8k: fix illegal usage of GPIOMichal Vokáč1-2/+1
When working with GPIO, its direction must be set either when the GPIO is requested by gpiod_get*() or later on by one of the gpiod_direction_*() functions. Neither of this is done here which results in undefined behavior on some systems. As the reset GPIO is used right after it is requested here, it makes sense to configure it as GPIOD_OUT_HIGH right away. With that, the following gpiod_set_value_cansleep(1) becomes redundant and can be safely removed. Fixes: a653f2f538f9 ("net: dsa: qca8k: introduce reset via gpio feature") Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-30Merge tag 'mm-hotfixes-stable-2024-01-28-23-21' of ↵Linus Torvalds23-156/+394
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "22 hotfixes. 11 are cc:stable and the remainder address post-6.7 issues or aren't considered appropriate for backporting" * tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits) mm: thp_get_unmapped_area must honour topdown preference mm: huge_memory: don't force huge page alignment on 32 bit userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory scs: add CONFIG_MMU dependency for vfree_atomic() mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range() mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty() selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag selftests: mm: fix map_hugetlb failure on 64K page size systems MAINTAINERS: supplement of zswap maintainers update stackdepot: make fast paths lock-less again stackdepot: add stats counters exported via debugfs mm, kmsan: fix infinite recursion due to RCU critical section mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again selftests/mm: switch to bash from sh MAINTAINERS: add man-pages git trees mm: memcontrol: don't throttle dying tasks on memory.high mm: mmap: map MAP_STACK to VM_NOHUGEPAGE uprobes: use pagesize-aligned virtual address when replacing pages selftests/mm: mremap_test: fix build warning ...
2024-01-29drm/amdgpu: use helper macro HW_ERR instead of Hardware error stringYang Wang2-8/+8
use helper macro HW_ERR to instead of Hardware error string. Signed-off-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdgpu/pm: Use macro definitions in the smu IH process functionMa Jun4-13/+23
Replace the hard-coded numbers with macro definition Signed-off-by: Ma Jun <Jun.Ma2@amd.com> Reviewed-by: Yang Wang <kevinyang.wang@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: 3.2.270Aric Cyr1-1/+1
- Add control flag for IPS residency profiling - Populate invalid split index to be 0xF - Fix dcn35 8k30 Underflow/Corruption Issue - Fix DP audio settings - Use correct phantom pipe when populating subvp pipe info - Fix incorrect mpc_combine array size - Fix DPSTREAM CLK on and off sequence - Fix USB-C flag update after enc10 feature init - Add debugfs disallow edp psr - Unify optimize_required flags and VRR adjustments - Increased min_dcfclk_mhz and min_fclk_mhz - Fix static screen event mask definition change Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: [FW Promotion] Release 0.0.202.0Anthony Koo1-1/+7
- Add control flag for IPS residency profiling Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Anthony Koo <anthony.koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Populate invalid split index to be 0xFAlvin Lee1-2/+2
[why] There exists scenarios where the split index for subvp can be pipe index 0. The assumption in FW is that the split index won't be 0 but this is incorrect. [how] Instead populate non-split cases to be 0xF to differentiate between split and non-split. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Fix dcn35 8k30 Underflow/Corruption IssueFangzhi Zuo2-18/+13
[why] odm calculation is missing for pipe split policy determination and cause Underflow/Corruption issue. [how] Add the odm calculation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: clkmgr unittest with removal of warn & rename DCN35 ips ↵Mounika Adhuri1-4/+4
handshake for idle [why] To Remove warnings of clk_mgr. [How] Added code to remove warnings by resolving redefinations. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Mounika Adhuri <moadhuri@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: fix DP audio settingsCharlene Liu1-2/+7
[why] Audio channel layout for 5.1ch is not correct [how] Add the audio layout for 5.1ch (channel_count = 6). Add divided by zero check. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Underflow workaround by increasing SR exit latencyNicholas Susanto2-18/+18
[Why] On 14us for exit latency time causes underflow for 8K monitor with HDR on. Increasing the latency to 28us fixes the underflow. [How] Increase the latency to 28us. This workaround should be sufficient before we figure out why SR exit so long. Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Susanto <nicholas.susanto@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: use correct phantom pipe when populating subvp pipe infoWenjing Liu1-1/+2
[why] In current code, we recognize a pipe as a phantom pipe if it references the same phantom stream. However it can also a phantom split pipe. If the phantom split pipe has a smaller pipe index than the phantom pipe we will mistakenly use the phantom split pipe as the phantom pipe. This causes an incorrect subvp configuration where the first half of the screen is flashing solid white image. [how] Add additional check that the pipe needs to be an OTG master pipe. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: fix incorrect mpc_combine array sizeWenjing Liu1-1/+1
[why] MAX_SURFACES is per stream, while MAX_PLANES is per asic. The mpc_combine is an array that records all the planes per asic. Therefore MAX_PLANES should be used as the array size. Using MAX_SURFACES causes array overflow when there are more than 3 planes. [how] Use the MAX_PLANES for the mpc_combine array size. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com> Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com> Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Fix DPSTREAM CLK on and off sequenceDmytro Laktyushkin2-7/+6
[Why] Secondary DP2 display fails to light up in some instances [How] Clock needs to be on when DPSTREAMCLK*_EN =1. This change moves dtbclk_p enable/disable point to make sure this is the case Reviewed-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Daniel Miess <daniel.miess@amd.com> Signed-off-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: fix invalid reg access on DCN35 FPGAEric Yang2-4/+23
[Why] Unguarded SMU and CLK IP access cause issue on FPGA [How] Guard them for FPGA environment Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Eric Yang <eric.yang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: refine code for dmcub inbox1 ring buffer debugFudongwang2-9/+5
[Why] 1. To watch dmcub inbox1 ring buffer cmd type without tools 2. dmub_cmd_PLAT_54186_wa 66 bytes [How] Added dmcub cmd type enum: unsigned char for debug use only, also fixed 66 bytes issue by using unsigned int in bit define instead of unsigned char. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Fudongwang <fudong.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Send DTBCLK disable message on first commitTaimur Hassan1-0/+1
[Why] Previous patch to allow DTBCLK disable didn't address boot case. Driver thinks DTBCLK is disabled by default, so we don't send disable message to PMFW. DTBCLK is then enabled at idle desktop on boot, burning power. [How] Set dtbclk_en to true on boot so that disable message is sent during first commit. Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <syed.hassan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: fix USB-C flag update after enc10 feature initCharlene Liu2-4/+4
[why] BIOS's integration info table not following the original order which is phy instance is ext_displaypath's array index. [how] Move them to follow the original order. Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: add debugfs disallow edp psrHersen Wu4-2/+67
[Why] fix reading edp rx crc timeout failure. after bootup, kernel setup psr with dpcd 0x170 = 5. this notify rx psr enable and let rx fw start checking crc for fw internal logic. rx fw may not update crc read count within dpcd 0x246. read count is always 0. this will lead tx crc reading timeout. [How] add debugfs to let test app to disbable rx crc checking for rx internal logic. then test app can read rx crc dpcd 0x246 successfully. expected app sequence is as below: 1. disable eDP PHY and notify eDP rx with dpcd 0x600 = 2. 2. echo 0x1 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr 3. enable eDP PHY and notify eDP rx with dpcd 0x600 = 1 but without dpcd 0x170 = 5. 4. read crc from rx dpcd 0x270, 0x246, etc. 5. echo 0x0 /sys/kernel/debug/dri/0/eDP-X/disallow_edp_enter_psr. this will let eDP back to normal with psr setup dpcd 0x170 = 5. Reviewed-by: Wayne Lin <wayne.lin@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Hersen Wu <hersenxs.wu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: For FPO and SubVP/DRR configs program vmin/max selAlvin Lee9-25/+56
[Why & How] For FPO and SubVP/DRR cases we need to ensure to program OTG_V_TOTAL_MIN/MAX_SEL, otherwise stretching the vblank in FPO / SubVP / DRR cases will not have any effect and we could hit underflow / corruption. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alvin Lee <alvin.lee2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Unify optimize_required flags and VRR adjustmentsAric Cyr5-17/+10
[why] There is only a single call to dc_post_update_surfaces_to_stream so there is no need to have two flags to control it. Unifying this to a single flag allows dc_stream_adjust_vmin_vmax to skip actual programming when there is no change required. [how] Remove wm_optimze_required flag and set only optimize_required in its place. Then in dc_stream_adjust_vmin_vmax, check that the stream timing range matches the requested one and skip programming if they are equal. Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: increased min_dcfclk_mhz and min_fclk_mhzSohaib Nadeem1-1/+1
[why] Originally, PMFW said min FCLK is 300Mhz, but min DCFCLK can be increased to 400Mhz because min FCLK is now 600Mhz so FCLK >= 1.5 * DCFCLK hardware requirement will still be satisfied. Increasing min DCFCLK addresses underflow issues (underflow occurs when phantom pipe is turned on for some Sub-Viewport configs). [how] Increasing DCFCLK by raising the min_dcfclk_mhz Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com> Reviewed-by: Alvin Lee <alvin.lee2@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Sohaib Nadeem <sohaib.nadeem@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Wait for mailbox ready when powering up DMCUBNicholas Kazlauskas1-2/+11
[Why] Otherwise we can send commands too early and they don't execute until the next command is sent. [How] Check the extra status bit when polling for HW powered up. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Wait before sending idle allow and after idle disallowNicholas Kazlauskas1-1/+6
[Why] We want acknowledgment of the driver idle disallow from DMCUB before continuing with any further programming. For idle allow we want to minimize the chance of DMCUB actively interacing with other firmware components on the system (eg. PMFW) at the same time. [How] Ensure that DMCUB isn't in the middle of processing other command submissions prior to allowing idle and after disallowing idle by inserting a wait before the allow and by changing the wait type for the idle disallow. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Revert "drm/amd/display: initialize all the dpm level's stutter latency"Charlene Liu1-3/+1
Revert commit 885c71ad791c ("drm/amd/display: initialize all the dpm level's stutter latency") Because it causes some regression Reviewed-by: Muhammad Ahmed <ahmed.ahmed@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Charlene Liu <charlene.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Fix static screen event mask definition changeYiling Chen10-27/+28
[why] The static screen event mask definition is different betwnn DCN31 after and before. [how] Rename DCN30_set_static_screen_control to DCN31. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Yiling Chen <yi-ling.chen2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Introduce a simple contribution list for display codeRodrigo Siqueira3-110/+169
This commit adds a contribution list for display under the kernel documentation with some first suggestions. It also drops an old TODO list from the display folder. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add an explanation about the DC weekly patchesRodrigo Siqueira1-7/+69
This commit introduces some explanation about the display team validation. Changes since V1: - Remove unprecise information about the DC process for now, can be added later on. - Jani: Fix bullets Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add entry for the DIO componentRodrigo Siqueira2-0/+22
Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add entry for OPP in the kernel docRodrigo Siqueira2-0/+28
Introduce OPP as part of the kernel documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add kernel doc entry for MPCRodrigo Siqueira3-80/+185
This commit adds a kernel-doc entry for the MPC block. Since it enabled the kernel-doc to parse some of the documentation in the mpc.h file, fixing some of the comments was required. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add kernel doc entry for DPPRodrigo Siqueira2-0/+37
This commit introduces basic DPP information and the struct scan for code documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdkfd: Use correct drm device for cgroup permission checkMukul Joshi1-2/+7
On GFX 9.4.3, for a given KFD node, fetch the correct drm device from XCP manager when checking for cgroup permissions. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdkfd: Use S_ENDPGM_SAVED in trap handlerJay Cornwall3-9/+9
This instruction has no functional difference to S_ENDPGM but allows performance counters to track save events correctly. Signed-off-by: Jay Cornwall <jay.cornwall@amd.com> Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdkfd: Correct partial migration virtual addrPhilip Yang1-1/+1
Partial migration to system memory should use migrate.addr, not prange->start as virtual address to allocate system memory page. Fixes: a546a2768440 ("drm/amdkfd: Use partial migrations/mapping for GPU/CPU page faults in SVM") Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Xiaogang Chen <Xiaogang.Chen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdgpu: move the drm client creation behind drm device registrationLe Ma3-11/+27
This patch is to eliminate interrupt warning below: "[drm] Fence fallback timer expired on ring sdma0.0". An early vm pt clearing job is sent to SDMA ahead of interrupt enabled. And re-locating the drm client creation following after drm_dev_register looks like a more proper flow. v2: wrap the drm client creation Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles") Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/display: Fix potential NULL pointer dereferences in ↵Srinivasan Shanmugam1-2/+5
'dcn10_set_output_transfer_func()' The 'stream' pointer is used in dcn10_set_output_transfer_func() before the check if 'stream' is NULL. Fixes the below: drivers/gpu/drm/amd/amdgpu/../display/dc/hwss/dcn10/dcn10_hwseq.c:1892 dcn10_set_output_transfer_func() warn: variable dereferenced before check 'stream' (see line 1875) Fixes: ddef02de0d71 ("drm/amd/display: add null checks before logging") Cc: Wyatt Wood <wyatt.wood@amd.com> Cc: Anthony Koo <Anthony.Koo@amd.com> Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amd/include: Add missing registers/mask for DCN316 and 350Rodrigo Siqueira4-0/+103
Cc: Jun Lei <Jun.Lei@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add simple doc page for DCHUBBUBRodrigo Siqueira2-0/+18
Enable the documentation to extract code documentation from dchubbub.h file. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29Documentation/gpu: Add basic page for HUBPRodrigo Siqueira3-1/+31
Create the HUBP documentation page and add the doc references to extract the HUBP code documentation. Cc: Mario Limonciello <mario.limonciello@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Harry Wentland <Harry.Wentland@amd.com> Cc: Hamza Mahfooz <hamza.mahfooz@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Acked-by: Christian König <christian.koenig@amd.com> Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29drm/amdgpu: update documentation on new chipsAlex Deucher1-0/+2
These have been released now, so add them to the documentation. Acked-by: Feifei Xu <Feifei.Xu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-01-29io_uring/net: limit inline multishot retriesJens Axboe1-3/+20
If we have multiple clients and some/all are flooding the receives to such an extent that we can retry a LOT handling multishot receives, then we can be starving some clients and hence serving traffic in an imbalanced fashion. Limit multishot retry attempts to some arbitrary value, whose only purpose serves to ensure that we don't keep serving a single connection for way too long. We default to 32 retries, which should be more than enough to provide fairness, yet not so small that we'll spend too much time requeuing rather than handling traffic. Cc: stable@vger.kernel.org Depends-on: 704ea888d646 ("io_uring/poll: add requeue return code from poll multishot handling") Depends-on: 1e5d765a82f ("io_uring/net: un-indent mshot retry path in io_recv_finish()") Depends-on: e84b01a880f6 ("io_uring/poll: move poll execution helpers higher up") Fixes: b3fdea6ecb55 ("io_uring: multishot recv") Fixes: 9bb66906f23e ("io_uring: support multishot in recvmsg") Link: https://github.com/axboe/liburing/issues/1043 Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-29io_uring/poll: add requeue return code from poll multishot handlingJens Axboe2-2/+15
Since our poll handling is edge triggered, multishot handlers retry internally until they know that no more data is available. In preparation for limiting these retries, add an internal return code, IOU_REQUEUE, which can be used to inform the poll backend about the handler wanting to retry, but that this should happen through a normal task_work requeue rather than keep hammering on the issue side for this one request. No functional changes in this patch, nobody is using this return code just yet. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-01-29io_uring/net: un-indent mshot retry path in io_recv_finish()Jens Axboe1-16/+20
In preparation for putting some retry logic in there, have the done path just skip straight to the end rather than have too much nesting in here. No functional changes in this patch. Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 18:44:51 +0300