| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 03270634e242 ("USB: Add ADU support for Ontrak ADU devices")
Cc: stable <stable@vger.kernel.org> # 2.6.19
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to use the current alternate setting when verifying the
interface descriptors to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure to use the current alternate setting when looking up the
endpoints on epic devices to avoid binding to an invalid interface.
Failing to do so could cause the driver to misbehave or trigger a WARN()
in usb_submit_urb() that kernels with panic_on_warn set would choke on.
Fixes: 6e8cf7751f9f ("USB: add EPIC support to the io_edgeport driver")
Cc: stable <stable@vger.kernel.org> # 2.6.21
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191210112601.3561-5-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Under certain circumstances, encoder atomic_check() can be entered
without adjusted_mode having been reset to the same as mode, which
confuses the scaling logic and can lead to a misprogrammed display.
Fix this by checking against the user-provided mode directly.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=108615
Link: https://gitlab.freedesktop.org/xorg/driver/xf86-video-nouveau/issues/464
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Noticed this while working on some unrelated CRC stuff. Currently,
userspace has very little support for BPCs higher than 8. While this
doesn't matter for most things, on MST topologies we need to be careful
about ensuring that we do our best to make any given display
configuration fit within the bandwidth restraints of the topology, since
otherwise less people's monitor configurations will work.
Allowing for BPC settings higher than 8 dramatically increases the
required bandwidth for displays in most configurations, and consequently
makes it a lot less likely that said display configurations will pass
the atomic check.
In the future we want to fix this correctly by making it so that we
adjust the bpp for each display in a topology to be as high as possible,
while making sure to lower the bpp of each display in the event that we
run out of bandwidth and need to rerun our atomic check. But for now,
follow the behavior that both i915 and amdgpu are sticking to.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
In order to be able to use bpc values that are different from what the
connector reports, we want to be able to store the bpc value we decide
on using for an atomic state in nv50_head_atom and refer to that instead
of simply using the value that the connector reports throughout the
whole atomic check phase and commit phase. This will let us (eventually)
implement the max bpc connector property, and will also be needed for
limiting the bpc we use on MST displays to 8 in the next commit.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Since nv50_outp_atomic_check_view() can set crtc_state->mode_changed, we
probably should be calling it before handling any PBN changes. Just a
precaution.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 232c9eec417a ("drm/nouveau: Use atomic VCPI helpers for MST")
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@redhat.com>
Cc: Jerry Zuo <Jerry.Zuo@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Juston Li <juston.li@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: <stable@vger.kernel.org> # v5.1+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
We do not support atomic modesetting on pre-nv50 hardware, but until now
our connector code was setting drm_connector->state on pre-nv50 hardware.
This causes the core to enter atomic modesetting paths in at least:
1. drm_connector_get_encoder(), returning connector->state->best_encoder
which is always 0, causing us to always report 0 as encoder_id in
the drmModeConnector struct returned by drmModeGetConnector().
2. drm_encoder_get_crtc(), returning NULL because uses_atomic get set,
causing us to always report 0 as crtc_id in the drmModeEncoder struct
returned by drmModeGetEncoder()
Which in turn confuses userspace, at least plymouth thinks that the pipe
has changed because of this and tries to reconfigure it unnecessarily.
More in general we should not set drm_connector->state in the non-atomic
code as this violates the drm-core's expectations.
This commit fixes this by using a nouveau_conn_atom struct embedded in the
nouveau_connector struct for property handling in the non-atomic case.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1706557
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
Place the declaration of struct nouveau_conn_atom above that of
struct nouveau_connector. This commit makes no changes to the moved
block what so ever, it just moves it up a bit.
This is a preparation patch to fix some issues with connector handling
on pre nv50 displays (which do not use atomic modesetting).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
|
|
The problem arises because our read() function grabs a lock of the
circular buffer, finds something of interest, then invokes copy_to_user()
straight from the buffer, which in turn takes mm->mmap_sem. In the same
time, the callback mon_bin_vma_fault() is invoked under mm->mmap_sem.
It attempts to take the fetch lock and deadlocks.
This patch does away with protecting of our page list with any
semaphores, and instead relies on the kernel not close the device
while mmap is active in a process.
In addition, we prohibit re-sizing of a buffer while mmap is active.
This way, when (now unlocked) fault is processed, it works with the
page that is intended to be mapped-in, and not some other random page.
Note that this may have an ABI impact, but hopefully no legitimate
program is this wrong.
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com>
Reported-by: syzbot+56f9673bb4cdcbeb0e92@syzkaller.appspotmail.com
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Fixes: 46eb14a6e158 ("USB: fix usbmon BUG trigger")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191204203941.3503452b@suzdal.zaitcev.lan
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch makes the printout of the error message for failing to get a
VBUS regulator handle conditional on the error code being something other
than -EPROBE_DEFER.
Deferral is a normal thing, we don't need an error message for this.
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Nagarjuna Kristam <nkristam@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191128134358.3880498-2-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Explicitly initialize URB structure urb_list field in usb_init_urb().
This field can be potentially accessed uninitialized and its
initialization is coherent with the usage of list_del_init() in
usb_hcd_unlink_urb_from_ep() and usb_giveback_urb_bh() and its
explicit initialization in usb_hcd_submit_urb() error path.
Signed-off-by: Emiliano Ingrassia <ingrassia@epigenesys.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191127160355.GA27196@ingrassia.epigenesys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We can't use "port->sw" and/or "port->mux" after it has been freed.
Fixes: 23481121c81d ("usb: typec: class: Don't use port parent for getting mux handles")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Cc: stable <stable@vger.kernel.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20191126140452.14048-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Free the sw structure only after we are done using it.
This patch just moves the put_device() down a bit to avoid the
use after free.
Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting")
Signed-off-by: Wen Yang <wenyang@linux.alibaba.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Peter Chen <peter.chen@nxp.com>
Cc: stable <stable@vger.kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: linux-usb@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20191124142236.25671-1-wenyang@linux.alibaba.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.
Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).
However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.
In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk
(cherry picked from commit 82c69bf58650e644c61aa2bf5100b63a1070fd2f)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
intel_hdcp_transcoder_config() is clobbering some globally visible
state in .compute_config(). That is a big no no as .compute_config()
is supposed to have no visible side effects when either the commit
fails or it's just a TEST_ONLY commit.
Inline this stuff into intel_hdcp_enable() so that the state only
gets modified when we actually commit the state to the hardware.
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Fixes: 39e2df090c3c ("drm/i915/hdcp: update current transcoder into intel_hdcp")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-2-ville.syrjala@linux.intel.com
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
(cherry picked from commit 67e1d5ed85a83e232a9e0b995f5778a86722b96e)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
We're missing a workaround in the fbc code for all glk+ platforms
which can cause corruption around the top of the screen. So
enabling fbc by default is a bad idea. I'm not keen to backport
the w/a so let's start by disabling fbc by default on all glk+.
We'll lift the restriction once the w/a is in place.
Cc: stable@vger.kernel.org
Cc: Daniel Drake <drake@endlessm.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jian-Hong Pan <jian-hong@endlessm.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191127201222.16669-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit cd8c021b36a66833cefe2c90a79a9e312a2a5690)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Gen12 supports saving/restoring render counters per context. Apply OAR
configuration only for the context that is passed in to perf.
v2:
- Fix OACTXCONTROL value to only stop/resume counters.
- Remove gen12_update_reg_state_unlocked as power state is already
applied by the caller.
v3: (Lionel)
- Move register initialization into the array
- Assume a valid oa_config in enable_metric_set
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-2-umesh.nerlige.ramappa@intel.com
(cherry picked from commit ccdeed497042676e13fc1625e2a341880eff5da5)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
SAMPLE_OA_REPORT enables sampling of OA reports from the OA buffer.
Since reports from OA buffer had system wide visibility, collecting
samples from the OA buffer was a privileged operation on previous
platforms. Prior to TGL, it was also necessary to sample the OA buffer
to normalize reports from MI REPORT PERF COUNT.
TGL has a dedicated OAR unit to sample perf reports for a specific
render context. This removes the necessity to sample OA buffer.
- If not sampling the OA buffer, allow non-privileged access. An earlier
patch allows the non-privilege access:
https://patchwork.freedesktop.org/patch/337716/?series=68582&rev=1
- Clear up the path for non-privileged access in this patch
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191206194339.31356-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 322d56aa3145a28445907ecc638a2c3aa3295c6b)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
I've spent a bit too much time reviewing all kinds of users all over
the kernel for this buffer sharing infrastructure. And some of it is
at least questionable.
Make sure we at least see when this stuff flies by.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Sumit Semwal <sumit.semwal@linaro.org>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191204215105.874074-1-daniel.vetter@ffwll.ch
|
|
In order to avoid confusing the HW, we must never submit an empty ring
during lite-restore, that is we should always advance the RING_TAIL
before submitting to stay ahead of the RING_HEAD.
Normally this is prevented by keeping a couple of spare NOPs in the
request->wa_tail so that on resubmission we can advance the tail. This
relies on the request only being resubmitted once, which is the normal
condition as it is seen once for ELSP[1] and then later in ELSP[0]. On
preemption, the requests are unwound and the tail reset back to the
normal end point (as we know the request is incomplete and therefore its
RING_HEAD is even earlier).
However, if this w/a should fail we would try and resubmit the request
with the RING_TAIL already set to the location of this request's wa_tail
potentially causing a GPU hang. We can spot when we do try and
incorrectly resubmit without advancing the RING_TAIL and spare any
embarrassment by forcing the context restore.
In the case of preempt-to-busy, we leave the requests running on the HW
while we unwind. As the ring is still live, we cannot rewind our
rq->tail without forcing a reload so leave it set to rq->wa_tail and
only force a reload if we resubmit after a lite-restore. (Normally, the
forced reload will be a part of the preemption event.)
Fixes: 22b7a426bbe1 ("drm/i915/execlists: Preempt-to-busy")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/673
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@kernel.vger.org
Link: https://patchwork.freedesktop.org/patch/msgid/20191209023215.3519970-1-chris@chris-wilson.co.uk
|
|
Add missing endpoint-type sanity checks to probe.
This specifically prevents a warning in USB core on URB submission when
fuzzing USB descriptors.
Signed-off-by: Johan Hovold <johan@kernel.org>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-4-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The driver failed to initialise its receive-buffer pointer, something
which could lead to an illegal free on late probe errors.
Fix this by making sure to clear all driver data at allocation.
Fixes: 2032e2c2309d ("usb_gigaset: code cleanup")
Cc: stable <stable@vger.kernel.org> # 2.6.33
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a general protection fault when accessing the endpoint descriptors
which could be triggered by a malicious device due to missing sanity
checks on the number of endpoints.
Reported-by: syzbot+35b1c403a14f5c89eba7@syzkaller.appspotmail.com
Fixes: 07dc1f9f2f80 ("[PATCH] isdn4linux: Siemens Gigaset drivers - M105 USB DECT adapter")
Cc: stable <stable@vger.kernel.org> # 2.6.17
Cc: Hansjoerg Lipp <hjlipp@web.de>
Cc: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/r/20191202085610.12719-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This undoes the previous call to alloc_chrdev_region() on failure,
and is probably what was meant originally given the label name.
Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com>
Cc: stable <stable@vger.kernel.org>
Fixes: 187ac53e590c ("staging: vchiq_arm: rework probe and init functions")
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Link: https://lore.kernel.org/r/20191203153921.70540-1-marcgonzalez@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
`rename_file' was exported but not properly namespaced causing a
multiple definition error because `rename_file' is already defined in
fs/hostfs/hostfs_user.c:
ld: drivers/staging/exfat/exfat_core.o: in function `rename_file':
drivers/staging/exfat/exfat_core.c:2327: multiple definition of
`rename_file'; fs/hostfs/hostfs_user.o:fs/hostfs/hostfs_user.c:350:
first defined here
make: *** [Makefile:1077: vmlinux] Error 1
This error can be reproduced on ARCH=um by selecting:
CONFIG_EXFAT_FS=y
CONFIG_HOSTFS=y
Add a namespace prefix exfat_* to fix this error.
Reported-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Cc: stable <stable@vger.kernel.org>
Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Link: https://lore.kernel.org/r/20191204234522.42855-1-brendanhiggins@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
wlan-ng uses the function crc32_le,
but CRC32 wasn't a dependency of wlan-ng
Co-developed-by: Michael Kupfer <michael.kupfer@fau.de>
Signed-off-by: Michael Kupfer <michael.kupfer@fau.de>
Signed-off-by: Kay Friedrich <kay.friedrich@fau.de>
Link: https://lore.kernel.org/r/20191127112457.2301-1-kay.friedrich@fau.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It should depends on ETHERNET, otherwise building fails:
drivers/staging/hp/hp100.o: In function `hp100_pci_remove':
hp100.c:(.text+0x165): undefined reference to `unregister_netdev'
hp100.c:(.text+0x214): undefined reference to `free_netdev'
Fixes: 52340b82cf1a ("hp100: Move 100BaseVG AnyLAN driver to staging")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/20191113021306.35464-1-yuehaibing@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current use of the mode flag SPI_CS_HIGH is fragile: it
overwrites anything already assigned by the SPI core.
Assign ^= SPI_CS_HIGH since we might be active high
already, and that is usually the case with GPIOs used
for chip select, even if they are in practice active low.
Add a comment clarifying why ^= SPI_CS_HIGH is the right
choice here.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20191204233230.22309-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently the discard code in clr_alloc_bitmap() is just dead code.
Move code around so that the discard operation is properly attempted
when enabled.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Link: https://lore.kernel.org/r/20191205152913.GJ3276@xps-13
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Finally, setup the VIU registers and start the AFBC decoder to support
displaying AFBC encoded buffers on Amlogic GXM and G12A SoCs.
The RDMA is used here to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a long period of time, producing display glitches.
The vsync irq must still be left enabled otherwise the RDMA modules isn't
trigerred when the interrupt line is masked.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-10-narmstrong@baylibre.com
|
|
When using an AFBC encoded frame, the AFBC Decoder must be reset,
configured and enabled at each vsync IRQ.
To leave time for that, use the maximum lines hold time to give time
for AFBC setup and avoid visual glitches.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fix typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-9-narmstrong@baylibre.com
|
|
The Amlogic G12A AFBC Decoder pixel input need to be routed diferently
than the Amlogic GXM AFBC decoder, this adds support for routing the
VIU OSD1 pixel source to the AFBC "Mali Unpack" module.
This "Mali Unpack" module is also configured with a static RGBA mapping
for now until we support more pixel formats.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-8-narmstrong@baylibre.com
|
|
This adds all the OSD configuration plumbing to support the AFBC decoders
path to display of the OSD1 plane.
The Amlogic GXM and G12A AFBC decoders are integrated very differently.
The Amlogic GXM has a direct output path to the OSD1 VIU pixel input,
because the GXM AFBC decoder seem to be a custom IP developed by Amlogic.
On the other side, the Amlogic G12A AFBC decoder seems to be an external
IP that emit pixels on an AXI master hooked to a "Mali Unpack" block
feeding the OSD1 VIU pixel input.
This uses a weird "0x1000000" internal HW physical address on both
sides to transfer the pixels.
For Amlogic GXM, the supported pixel formats are the same as the normal
linear OSD1 mode.
On the other side, Amlogic added support for all AFBC v1.2 formats for
the G12A AFBC integration.
For simplicity, we stick to the already supported formats for now.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-7-narmstrong@baylibre.com
|
|
This adds the driver for the ARM Framebuffer Compression decoders found
in the Amlogic GXM and G12A SoCs.
The Amlogic GXM and G12A AFBC decoder are totally different, the GXM only
handling only the AFBC v1.0 modes and the G12A decoder handling the
AFBC v1.2 modes.
The G12A AFBC decoder is an external IP integrated in the video pipeline,
and the GXM AFBC decoder seems to the an Amlogic custom decoder more
tighly integrated in the video pipeline.
The GXM AFBC decoder can handle only one AFBC plane for 2 available
OSD planes available in HW, and the G12A AFBC decoder can handle up
to 4 AFBC planes for up to 3 OSD planes available in HW.
The Amlogic GXM supports 16x16 SPARSE and 16x16 SPLIT AFBC buffers up
to 4k.
On the other side, for G12A SPLIT is mandatory in 16x16 block mode, but
for 4k modes 32x8+SPLIT AFBC buffers is manadatory for performances reasons.
The RDMA is used here to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a long period of time, producing display glitches.
For this we use the meson_rdma_writel_sync() which adds the register
write tuple (VPU register offset and register value) to the RDMA buffer
and write the value to the HW.
When enabled, the RDMA is enabled to rewrite the same sequence at the
next VSYNC event, until a new buffer is committed to the OSD plane.
Then the Amlogic G12A is switched to RDMA, the Amlogic GXM Decoder
doesn't need a reset/reprogram at each vsync, but needs to keep the
vsync interrupt enabled to trigger the RDMA module.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
[narmstrong: fixed typo in commit log]
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-6-narmstrong@baylibre.com
|
|
The VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ
event like VSYNC or a line input counter.
The initial implementation handles a single channel (over 8), triggered
by the VSYNC irq and does not handle the RDMA irq.
The RDMA will be usefull to reset and program the AFBC decoder unit
on each vsync without involving the interrupt handler that can
be masked for a log period of time, producing display glitches.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-5-narmstrong@baylibre.com
|
|
Also store the framebuffer width in the private common struct
to be used by the AFBC decoder module driver when committing the AFBC
plane.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-4-narmstrong@baylibre.com
|
|
The Amlogic VPU embeds a "Register DMA" that can write a sequence of registers
on the VPU AHB bus, either manually or triggered by an internal IRQ event like
VSYNC or a line input counter.
This adds the register defines.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-3-narmstrong@baylibre.com
|
|
Add the registers used to program the ARM Framebuffer Compression decoders
used in the Amlogic GXM and G12A SoCs families.
This also adds the routing and pipeline configuration bits and registers
needed to enable AFBC support.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021091509.3864-2-narmstrong@baylibre.com
|
|
The code doesn't compile due to incompatible pointer errors such as
drivers/staging/octeon/ethernet-tx.c:649:50: error:
passing argument 1 of 'cvmx_wqe_get_grp' from incompatible pointer type
This is due to mixing, for example, cvmx_wqe_t with 'struct cvmx_wqe'.
Unfortunately, one can not just revert the primary offending commit, as doing so
results in secondary errors. This is made worse by the fact that the "removed"
typedefs still exist and are used widely outside the staging directory,
making the entire set of "remove typedef" changes pointless and wrong.
Reflect reality and mark the driver as BROKEN.
Fixes: ef1fe6b7369a ("staging: octeon: remove typedef declaration for cvmx_wqe")
Fixes: 73aef0c9d2c6 ("staging: octeon: remove typedef declaration for cvmx_helper_link_info")
Cc: Wambui Karuga <wambui.karugax@gmail.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191202141836.9363-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the fbops member of struct fb_info is const, we can start
making the ops const as well.
v2: fix typo (Christophe de Dinechin)
Cc: Kirti Wankhede <kwankhede@nvidia.com>
Cc: kvm@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Kirti Wankhede <kwankhede@nvidia.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ddb10df1316ef585930cda7718643a580f4fe37b.1575390741.git.jani.nikula@intel.com
|
|
This partially reverts commit e3a5d8e386c3fb973fa75f2403622a8f3640ec06.
Commit e3a5d8e386c3 ("check bi_size overflow before merge") adds a bio_full
check to __bio_try_merge_page. This will cause __bio_try_merge_page to fail
when the last bi_io_vec has been reached. Instead, what we want here is only
the bi_size overflow check.
Fixes: e3a5d8e386c3 ("block: check bi_size overflow before merge")
Cc: stable@vger.kernel.org # v5.4+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix refcount underflow warning when unmounting to servers which didn't grant
directory leases.
[ 301.680095] refcount_t: underflow; use-after-free.
[ 301.680192] WARNING: CPU: 1 PID: 3569 at lib/refcount.c:28
refcount_warn_saturate+0xb4/0xf3
...
[ 301.682139] Call Trace:
[ 301.682240] close_shroot+0x97/0xda [cifs]
[ 301.682351] SMB2_tdis+0x7c/0x176 [cifs]
[ 301.682456] ? _get_xid+0x58/0x91 [cifs]
[ 301.682563] cifs_put_tcon.part.0+0x99/0x202 [cifs]
[ 301.682637] ? ida_free+0x99/0x10a
[ 301.682727] ? cifs_umount+0x3d/0x9d [cifs]
[ 301.682829] cifs_put_tlink+0x3a/0x50 [cifs]
[ 301.682929] cifs_umount+0x44/0x9d [cifs]
Fixes: 72e73c78c446 ("cifs: close the shared root handle on tree disconnect")
Signed-off-by: Steve French <stfrench@microsoft.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Aurelien Aptel <aaptel@suse.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Reported-and-tested-by: Arthur Marsh <arthur.marsh@internode.on.net>
|
|
In iscsi_if_rx func, after receiving one request through
iscsi_if_recv_msg func, iscsi_if_send_reply will be called to try to
reply to the request in a do-while loop. If the iscsi_if_send_reply
function keeps returning -EAGAIN, a deadlock will occur.
For example, a client only send msg without calling recvmsg func, then
it will result in the watchdog soft lockup. The details are given as
follows:
sock_fd = socket(AF_NETLINK, SOCK_RAW, NETLINK_ISCSI);
retval = bind(sock_fd, (struct sock addr*) & src_addr, sizeof(src_addr);
while (1) {
state_msg = sendmsg(sock_fd, &msg, 0);
//Note: recvmsg(sock_fd, &msg, 0) is not processed here.
}
close(sock_fd);
watchdog: BUG: soft lockup - CPU#7 stuck for 22s! [netlink_test:253305] Sample time: 4000897528 ns(HZ: 250) Sample stat:
curr: user: 675503481560, nice: 321724050, sys: 448689506750, idle: 4654054240530, iowait: 40885550700, irq: 14161174020, softirq: 8104324140, st: 0
deta: user: 0, nice: 0, sys: 3998210100, idle: 0, iowait: 0, irq: 1547170, softirq: 242870, st: 0 Sample softirq:
TIMER: 992
SCHED: 8
Sample irqstat:
irq 2: delta 1003, curr: 3103802, arch_timer
CPU: 7 PID: 253305 Comm: netlink_test Kdump: loaded Tainted: G OE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
pstate: 40400005 (nZcv daif +PAN -UAO)
pc : __alloc_skb+0x104/0x1b0
lr : __alloc_skb+0x9c/0x1b0
sp : ffff000033603a30
x29: ffff000033603a30 x28: 00000000000002dd
x27: ffff800b34ced810 x26: ffff800ba7569f00
x25: 00000000ffffffff x24: 0000000000000000
x23: ffff800f7c43f600 x22: 0000000000480020
x21: ffff0000091d9000 x20: ffff800b34eff200
x19: ffff800ba7569f00 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000
x15: 0000000000000000 x14: 0001000101000100
x13: 0000000101010000 x12: 0101000001010100
x11: 0001010101010001 x10: 00000000000002dd
x9 : ffff000033603d58 x8 : ffff800b34eff400
x7 : ffff800ba7569200 x6 : ffff800b34eff400
x5 : 0000000000000000 x4 : 00000000ffffffff
x3 : 0000000000000000 x2 : 0000000000000001
x1 : ffff800b34eff2c0 x0 : 0000000000000300 Call trace:
__alloc_skb+0x104/0x1b0
iscsi_if_rx+0x144/0x12bc [scsi_transport_iscsi]
netlink_unicast+0x1e0/0x258
netlink_sendmsg+0x310/0x378
sock_sendmsg+0x4c/0x70
sock_write_iter+0x90/0xf0
__vfs_write+0x11c/0x190
vfs_write+0xac/0x1c0
ksys_write+0x6c/0xd8
__arm64_sys_write+0x24/0x30
el0_svc_common+0x78/0x130
el0_svc_handler+0x38/0x78
el0_svc+0x8/0xc
Link: https://lore.kernel.org/r/EDBAAA0BBBA2AC4E9C8B6B81DEEE1D6915E3D4D2@dggeml505-mbx.china.huawei.com
Signed-off-by: Bo Wu <wubo40@huawei.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some time ago the block layer was modified such that timeout handlers are
called from thread context instead of interrupt context. Make it safe to
run the iSCSI timeout handler in thread context. This patch fixes the
following lockdep complaint:
================================
WARNING: inconsistent lock state
5.5.1-dbg+ #11 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
kworker/7:1H/206 [HC0[0]:SC0[0]:HE1:SE1] takes:
ffff88802d9827e8 (&(&session->frwd_lock)->rlock){+.?.}, at: iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
{IN-SOFTIRQ-W} state was registered at:
lock_acquire+0x106/0x240
_raw_spin_lock+0x38/0x50
iscsi_check_transport_timeouts+0x3e/0x210 [libiscsi]
call_timer_fn+0x132/0x470
__run_timers.part.0+0x39f/0x5b0
run_timer_softirq+0x63/0xc0
__do_softirq+0x12d/0x5fd
irq_exit+0xb3/0x110
smp_apic_timer_interrupt+0x131/0x3d0
apic_timer_interrupt+0xf/0x20
default_idle+0x31/0x230
arch_cpu_idle+0x13/0x20
default_idle_call+0x53/0x60
do_idle+0x38a/0x3f0
cpu_startup_entry+0x24/0x30
start_secondary+0x222/0x290
secondary_startup_64+0xa4/0xb0
irq event stamp: 1383705
hardirqs last enabled at (1383705): [<ffffffff81aace5c>] _raw_spin_unlock_irq+0x2c/0x50
hardirqs last disabled at (1383704): [<ffffffff81aacb98>] _raw_spin_lock_irq+0x18/0x50
softirqs last enabled at (1383690): [<ffffffffa0e2efea>] iscsi_queuecommand+0x76a/0xa20 [libiscsi]
softirqs last disabled at (1383682): [<ffffffffa0e2e998>] iscsi_queuecommand+0x118/0xa20 [libiscsi]
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&session->frwd_lock)->rlock);
<Interrupt>
lock(&(&session->frwd_lock)->rlock);
*** DEADLOCK ***
2 locks held by kworker/7:1H/206:
#0: ffff8880d57bf928 ((wq_completion)kblockd){+.+.}, at: process_one_work+0x472/0xab0
#1: ffff88802b9c7de8 ((work_completion)(&q->timeout_work)){+.+.}, at: process_one_work+0x476/0xab0
stack backtrace:
CPU: 7 PID: 206 Comm: kworker/7:1H Not tainted 5.5.1-dbg+ #11
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Workqueue: kblockd blk_mq_timeout_work
Call Trace:
dump_stack+0xa5/0xe6
print_usage_bug.cold+0x232/0x23b
mark_lock+0x8dc/0xa70
__lock_acquire+0xcea/0x2af0
lock_acquire+0x106/0x240
_raw_spin_lock+0x38/0x50
iscsi_eh_cmd_timed_out+0xa6/0x6d0 [libiscsi]
scsi_times_out+0xf4/0x440 [scsi_mod]
scsi_timeout+0x1d/0x20 [scsi_mod]
blk_mq_check_expired+0x365/0x3a0
bt_iter+0xd6/0xf0
blk_mq_queue_tag_busy_iter+0x3de/0x650
blk_mq_timeout_work+0x1af/0x380
process_one_work+0x56d/0xab0
worker_thread+0x7a/0x5d0
kthread+0x1bc/0x210
ret_from_fork+0x24/0x30
Fixes: 287922eb0b18 ("block: defer timeouts to a workqueue")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191209173457.187370-1-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The file name in the documentation is currently incorrect, so fix it.
Link: https://lore.kernel.org/r/fe264d62-0371-ea59-b66a-6d855290ce65@molgen.mpg.de
Fixes: 6d90615f1346 ("scsi: smartpqi: add sysfs entries")
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
The discovering of sas port is driven by workqueue in libsas. When libsas
is processing port events or phy events in workqueue, new events may rise
up and change the state of some structures such as asd_sas_phy. This may
cause some problems such as follows:
==>thread 1 ==>thread 2
==>phy up
==>phy_up_v3_hw()
==>oob_mode = SATA_OOB_MODE;
==>phy down quickly
==>hisi_sas_phy_down()
==>sas_ha->notify_phy_event()
==>sas_phy_disconnected()
==>oob_mode = OOB_NOT_CONNECTED
==>workqueue wakeup
==>sas_form_port()
==>sas_discover_domain()
==>sas_get_port_device()
==>oob_mode is OOB_NOT_CONNECTED and device
is wrongly taken as expander
This at last lead to the panic when libsas trying to issue a command to
discover the device.
[183047.614035] Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000058
[183047.622896] Mem abort info:
[183047.625762] ESR = 0x96000004
[183047.628893] Exception class = DABT (current EL), IL = 32 bits
[183047.634888] SET = 0, FnV = 0
[183047.638015] EA = 0, S1PTW = 0
[183047.641232] Data abort info:
[183047.644189] ISV = 0, ISS = 0x00000004
[183047.648100] CM = 0, WnR = 0
[183047.651145] user pgtable: 4k pages, 48-bit VAs, pgdp =
00000000b7df67be
[183047.657834] [0000000000000058] pgd=0000000000000000
[183047.662789] Internal error: Oops: 96000004 [#1] SMP
[183047.667740] Process kworker/u16:2 (pid: 31291, stack limit =
0x00000000417c4974)
[183047.675208] CPU: 0 PID: 3291 Comm: kworker/u16:2 Tainted: G
W OE 4.19.36-vhulk1907.1.0.h410.eulerosv2r8.aarch64 #1
[183047.687015] Hardware name: N/A N/A/Kunpeng Desktop Board D920S10,
BIOS 0.15 10/22/2019
[183047.695007] Workqueue: 0000:74:02.0_disco_q sas_discover_domain
[183047.700999] pstate: 20c00009 (nzCv daif +PAN +UAO)
[183047.705864] pc : prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.711510] lr : prep_ata_v3_hw+0xb0/0x230 [hisi_sas_v3_hw]
[183047.717153] sp : ffff00000f28ba60
[183047.720541] x29: ffff00000f28ba60 x28: ffff8026852d7228
[183047.725925] x27: ffff8027dba3e0a8 x26: ffff8027c05fc200
[183047.731310] x25: 0000000000000000 x24: ffff8026bafa8dc0
[183047.736695] x23: ffff8027c05fc218 x22: ffff8026852d7228
[183047.742079] x21: ffff80007c2f2940 x20: ffff8027c05fc200
[183047.747464] x19: 0000000000f80800 x18: 0000000000000010
[183047.752848] x17: 0000000000000000 x16: 0000000000000000
[183047.758232] x15: ffff000089a5a4ff x14: 0000000000000005
[183047.763617] x13: ffff000009a5a50e x12: ffff8026bafa1e20
[183047.769001] x11: ffff0000087453b8 x10: ffff00000f28b870
[183047.774385] x9 : 0000000000000000 x8 : ffff80007e58f9b0
[183047.779770] x7 : 0000000000000000 x6 : 000000000000003f
[183047.785154] x5 : 0000000000000040 x4 : ffffffffffffffe0
[183047.790538] x3 : 00000000000000f8 x2 : 0000000002000007
[183047.795922] x1 : 0000000000000008 x0 : 0000000000000000
[183047.801307] Call trace:
[183047.803827] prep_ata_v3_hw+0xf8/0x230 [hisi_sas_v3_hw]
[183047.809127] hisi_sas_task_prep+0x750/0x888 [hisi_sas_main]
[183047.814773] hisi_sas_task_exec.isra.7+0x88/0x1f0 [hisi_sas_main]
[183047.820939] hisi_sas_queue_command+0x28/0x38 [hisi_sas_main]
[183047.826757] smp_execute_task_sg+0xec/0x218
[183047.831013] smp_execute_task+0x74/0xa0
[183047.834921] sas_discover_expander.part.7+0x9c/0x5f8
[183047.839959] sas_discover_root_expander+0x90/0x160
[183047.844822] sas_discover_domain+0x1b8/0x1e8
[183047.849164] process_one_work+0x1b4/0x3f8
[183047.853246] worker_thread+0x54/0x470
[183047.856981] kthread+0x134/0x138
[183047.860283] ret_from_fork+0x10/0x18
[183047.863931] Code: f9407a80 528000e2 39409281 72a04002 (b9405800)
[183047.870097] kernel fault(0x1) notification starting on CPU 0
[183047.875828] kernel fault(0x1) notification finished on CPU 0
[183047.881559] Modules linked in: unibsp(OE) hns3(OE) hclge(OE)
hnae3(OE) mem_drv(OE) hisi_sas_v3_hw(OE) hisi_sas_main(OE)
[183047.892418] ---[ end trace 4cc26083fc11b783 ]---
[183047.897107] Kernel panic - not syncing: Fatal exception
[183047.902403] kernel fault(0x5) notification starting on CPU 0
[183047.908134] kernel fault(0x5) notification finished on CPU 0
[183047.913865] SMP: stopping secondary CPUs
[183047.917861] Kernel Offset: disabled
[183047.921422] CPU features: 0x2,a2a00a38
[183047.925243] Memory Limit: none
[183047.928372] kernel reboot(0x2) notification starting on CPU 0
[183047.934190] kernel reboot(0x2) notification finished on CPU 0
[183047.940008] ---[ end Kernel panic - not syncing: Fatal exception
]---
Fixes: 2908d778ab3e ("[SCSI] aic94xx: new driver")
Link: https://lore.kernel.org/r/20191206011118.46909-1-yanaijie@huawei.com
Reported-by: Gao Chuan <gaochuan4@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This patch disables autohibern8 feature in Cadence UFS. The autohibern8
feature has issues due to which unexpected interrupt trigger is happening.
After the interrupt issue is sorted out, autohibern8 feature will be
re-enabled
Link: https://lore.kernel.org/r/1575367635-22662-1-git-send-email-sheebab@cadence.com
Cc: <stable@vger.kernel.org>
Signed-off-by: sheebab <sheebab@cadence.com>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Tested-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
On this error path we call qla4xxx_mem_free() and then the caller also
calls qla4xxx_free_adapter() which calls qla4xxx_mem_free(). It leads to a
couple double frees:
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->chap_dma_pool' double freed
drivers/scsi/qla4xxx/ql4_os.c:8856 qla4xxx_probe_adapter() warn: 'ha->fw_ddb_dma_pool' double freed
Fixes: afaf5a2d341d ("[SCSI] Initial Commit of qla4xxx")
Link: https://lore.kernel.org/r/20191203094421.hw7ex7qr3j2rbsmx@kili.mountain
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Considering there can be multiple UFS hosts in SoC, give each ufs-bsg an
unique ID by appending the scsi host number to its device name.
Link: https://lore.kernel.org/r/0101016eca8dc9d7-d24468d3-04d2-4ef3-a906-abe8b8cbcd3d-000000@us-west-2.amazonses.com
Fixes: df032bf27a41 ("scsi: ufs: Add a bsg endpoint that supports UPIUs")
Signed-off-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
