summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-03-27net: mvpp2: cls: Rename the flow table macrosMaxime Chevallier3-15/+14
The Flow Table dictates what lookups will be issued for each flow type. The lookup sequence for each flow is similar, and the index of each lookup is computed by some macros. There are similar mechanisms for the C2 TCAM lookups, so in order to avoid confusion, rename the flow table index computing macros with a common prefix. The only difference in behaviour is that we now use the very first entry in the flow for the RSS lookup (the first entry was previously unused). Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Don't use the sequence attribute for classificationMaxime Chevallier2-18/+0
The classifier allows to combine multiple lookups in one "sequence" that is counted as a single lookup to an engine, with a single result. We don't actually use that feature, so remove any places where we set this field, so that the classifier doesn't try to interpret these fields. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Rename classifer per-port functionsMaxime Chevallier3-10/+9
This commit renames some of the classifier functions to follow the naming 'mvpp2_port_*' that's used for function that act on a given port. This commit is purely cosmetic. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Move C2 read/write helpers aroundMaxime Chevallier1-41/+41
Move C2 read/write helpers higher in the file to ease future work that rely on these helpers Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Write C2 TCAM data last when writing a C2 entryMaxime Chevallier1-7/+7
When writing a C2 entry to hardware, some registers writes will only take effect when the TCAM_DATA4 register is written. This includes all C2 TCAM registers, and the C2 invalidate register. To make sure we always write C2 entries correctly, document that behaviour with a comment, and move TCAM writes to the end of the mvpp2_cls_c2_write helper. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Use iterators to go through the cls_tableMaxime Chevallier2-8/+25
The cls_table is a global read-only table containing the different parameters that are used by various tables in the classifier. It describes the links between the Header Parser, the decoding table and the flow_table. There are several possible way we want to iterate over that table, depending on wich classifier engine we want to configure. For the Header Parser, we want to iterate over each entry. For the Decoding table, we want to iterate over each entry having a unique flow_id. Finally, when configuring an ethtool flow, we want to iterate over each entry having a unique flow_id and that has a given flow_type. This commit introduces some iterator to both provide syntactic sugar and also clarify the way we want to iterate over the table. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: debugfs: Allow reading the C2 engine table from debugfsMaxime Chevallier1-17/+59
PPv2's Classifier uses multiple engines to perform classification. So far, only the C2 engine is used, which has a 256 entries TCAM. So far, we only accessed the relevant entries from the C2 engines, which are the one implementing RSS. To implement and debug ntuple classification offload, beaing able to see the hit count for each C2 entry is helpful, so this commit moves the logic to a dedicated directory allowing to access each entry. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: debugfs: Allow reading the flow table from debugfsMaxime Chevallier1-6/+63
The Classifier flow table is the central part of the PPv2 Classifier, since it describes all classification steps performed for each flow. It has 512 entries, shared between all ports, which are divided into sequences that are pointed-to by the decoding table. Being able to see which entries in the flow table were hit is a key point when implementing and debugging classification offload. This commit allows reading each flow table entry's hit count independently, with a clear-on-read behaviour. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: debugfs: Store debugfs entries data in mvpp2 structMaxime Chevallier2-72/+26
The current way to store the required private data needed to access various debugfs entries is to alloc them on the fly, share them within the entries that need to access them, and finally have one entry free that data upon closing. This leads to hard to maintain code, and is very error-prone. This commit stores all debugfs related data in the same place, making sure this is allocated only when the debugfs directory is successfully created, so that we don't waste memory when we don't use this feature. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Make the flow definitions constMaxime Chevallier3-14/+15
The cls_flow table represent the overall configuration of the classifier, used to match the different traffic classes in the Parsing and Classification engines. This configuration is static, and applies to all PPv2 instances, we must therefore keep it const so that no modifications of this table are performed at runtime. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Rename MVPP2_N_FLOWS to MVPP2_N_PRS_FLOWSMaxime Chevallier4-7/+10
The macro definition MVPP2_N_FLOWS is ambiguous because it really represents the number of entries in the Header Parser that are used to identify the classification flows. Rename the macro to clearly state that we represent the number of flows in the Header Parser. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: use Lookup Type in classification enginesMaxime Chevallier3-0/+21
The PPv2 classifier allows to perform multiple lookups on the same engine when classifying a packet. These lookups can match similar parts of a packet header, but perform different actions upon matching. To differentiate these types of lookups, it's possible to specify a Lookup Type in the flow table entries, which will be part of the key for the lookup engines. This commit introduces the use of Lookup Types for C2 matches. Since for now we only perform C2 lookups to enable RSS, we only need one Lookup Type. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Start cls flow entries from beginning of tableMaxime Chevallier1-3/+5
The Classifier flow table has 512 entries, that contains lookups commands executed consecutively for every flow. Since we have 21 different flows, we have to carefully manage the flow table use. As of today, the start index of a lookup sequence is computed directly based in the flow->id. There are 8 reserved flow ids, from 0-7, which don't have any corresponding sequence in the flow table. We can therefore ignore them when computing the index, and make so that the first non-reserved flow point to the very beginning of the flow table. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Suggested-by: Alan Winkowski <walan@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: cls: Add missing MAC_DA field extractionMaxime Chevallier1-0/+3
PPv2's classifier supports extracting the MAC Destination Address from the L2 header to perform RSS and flow steering. Add the missing case when setting the Header Extracted Key fields in the flow table. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27net: mvpp2: Don't use an int to store netdev_features_tMaxime Chevallier1-1/+1
int is not long enough to store all netdev_features, use the correct dedicated type to store them when building the list of dev->features. Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27ceph: fix use-after-free on symlink traversalAl Viro1-1/+1
free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2019-03-27virt: vbox: Implement passing requestor info to the host for VirtualBox 6.0.xHans de Goede8-71/+197
VirtualBox 6.0.x has a new feature where the guest kernel driver passes info about the origin of the request (e.g. userspace or kernelspace) to the hypervisor. If we do not pass this information then when running the 6.0.x userspace guest-additions tools on a 6.0.x host, some requests will get denied with a VERR_VERSION_MISMATCH error, breaking vboxservice.service and the mounting of shared folders marked to be auto-mounted. This commit implements passing the requestor info to the host, fixing this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27tty: fix NULL pointer issue when tty_port ops is not setFabien Dessenne1-5/+5
Unlike 'client_ops' which is initialized to 'default_client_ops', the port operations 'ops' may be left to NULL. Check the 'ops' value before checking the 'ops->x' value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27Disable kgdboc failed by echo space to /sys/module/kgdboc/parameters/kgdbocWentao Wang1-1/+3
Echo "" to /sys/module/kgdboc/parameters/kgdboc will fail with "No such device” error. This is caused by function "configure_kgdboc" who init err to ENODEV when the config is empty (legal input) the code go out with ENODEV returned. Fixes: 2dd453168643 ("kgdboc: Fix restrict error") Signed-off-by: Wentao Wang <witallwang@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27dt-bindings: serial: Add compatible for Mediatek MT8183Erin Lo1-0/+1
This adds dt-binding documentation of uart for Mediatek MT8183 SoC Platform. Signed-off-by: Erin Lo <erin.lo@mediatek.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27tty/serial: atmel: RS485 HD w/DMA: enable RX after TX is stoppedRazvan Stefanescu1-3/+21
In half-duplex operation, RX should be started after TX completes. If DMA is used, there is a case when the DMA transfer completes but the TX FIFO is not emptied, so the RX cannot be restarted just yet. Use a boolean variable to store this state and rearm TX interrupt mask to be signaled again that the transfer finished. In interrupt transmit handler this variable is used to start RX. A warning message is generated if RX is activated before TX fifo is cleared. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27tty/serial: atmel: Add is_half_duplex helperRazvan Stefanescu1-12/+12
Use a helper function to check that a port needs to use half duplex communication, replacing several occurrences of multi-line bit checking. Fixes: b389f173aaa1 ("tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done") Cc: stable <stable@vger.kernel.org> Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27usb: u132-hcd: fix resource leakMukesh Ojha1-0/+3
if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by: Mukesh Ojha <mojha@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27usb: cdc-acm: fix race during wakeup blocking TX trafficRomain Izard1-3/+1
When the kernel is compiled with preemption enabled, the URB completion handler can run in parallel with the work responsible for waking up the tty layer. If the URB handler sets the EVENT_TTY_WAKEUP bit during the call to tty_port_tty_wakeup() to signal that there is room for additional input, it will be cleared at the end of this call. As a result, TX traffic on the upper layer will be blocked. This can be seen with a kernel configured with CONFIG_PREEMPT, and a fast modem connected with PPP running over a USB CDC-ACM port. Use test_and_clear_bit() instead, which ensures that each wakeup requested by the URB completion code will trigger a call to tty_port_tty_wakeup(). Fixes: 1aba579f3cf5 cdc-acm: handle read pipe errors Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-27Merge branch 'fix-btf_dedup'Alexei Starovoitov2-0/+50
Andrii Nakryiko says: ==================== This patch set fixes bug in btf_dedup_is_equiv() check mishandling equivalence comparison between VOID kind in candidate type graph versus anonymous non-VOID kind in canonical type graph. Patch #1 fixes bug, by comparing candidate and canonical kinds for equality, before proceeding to kind-specific checks. Patch #2 adds a test case testing this specific scenario. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-27selftests/bpf: add btf_dedup test for VOID equivalence checkAndrii Nakryiko1-0/+47
This patch adds specific test exposing bug in btf_dedup_is_equiv() when comparing candidate VOID type to a non-VOID canonical type. It's important for canonical type to be anonymous, otherwise name equality check will do the right thing and will exit early. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-27libbpf: fix btf_dedup equivalence check handling of different kindsAndrii Nakryiko1-0/+3
btf_dedup_is_equiv() used to compare btf_type->info fields, before doing kind-specific equivalence check. This comparsion implicitly verified that candidate and canonical types are of the same kind. With enum fwd resolution logic this check couldn't be done generically anymore, as for enums info contains vlen, which differs between enum fwd and fully-defined enum, so this check was subsumed by kind-specific equivalence checks. This change caused btf_dedup_is_equiv() to let through VOID vs other types check to reach switch, which was never meant to be handing VOID kind, as VOID kind is always pre-resolved to itself and is only equivalent to itself, which is checked early in btf_dedup_is_equiv(). This change adds back BTF kind equality check in place of more generic btf_type->info check, still defering further kind-specific checks to a per-kind switch. Fixes: 9768095ba97c ("btf: resolve enum fwds in btf_dedup") Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-03-27x86/realmode: Don't leak the trampoline kernel addressMatteo Croce1-2/+0
Since commit ad67b74d2469 ("printk: hash addresses printed with %p") at boot "____ptrval____" is printed instead of the trampoline addresses: Base memory trampoline at [(____ptrval____)] 99000 size 24576 Remove the print as we don't want to leak kernel addresses and this statement is not needed anymore. Fixes: ad67b74d2469d9b8 ("printk: hash addresses printed with %p") Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190326203046.20787-1-mcroce@redhat.com
2019-03-27i2c: wmt: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: sun6i-p2wi: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
2019-03-27i2c: stu300: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: mt65xx: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27i2c: iop3xx: make bindings file name match the driverWolfram Sang1-0/+0
If we use the "i2c-" prefix for the binding documentation file name, then it should match the file name of the driver, if possible. It is possible for this driver, so rename it. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2019-03-27HID: quirks: Fix keyboard + touchpad on Lenovo Miix 630Jeffrey Hugo1-1/+4
Similar to commit edfc3722cfef ("HID: quirks: Fix keyboard + touchpad on Toshiba Click Mini not working"), the Lenovo Miix 630 has a combo keyboard/touchpad device with vid:pid of 04F3:0400, which is shared with Elan touchpads. The combo on the Miix 630 has an ACPI id of QTEC0001, which is not claimed by the elan_i2c driver, so key on that similar to what was done for the Toshiba Click Mini. Signed-off-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-03-27x86/boot: Fix incorrect ifdeffery scopeBaoquan He1-2/+2
The declarations related to immovable memory handling are out of the BOOT_COMPRESSED_MISC_H #ifdef scope, wrap them inside. Signed-off-by: Baoquan He <bhe@redhat.com> Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Chao Fan <fanc.fnst@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: x86-ml <x86@kernel.org> Link: https://lkml.kernel.org/r/20190304055546.18566-1-bhe@redhat.com
2019-03-27gpio: mockup: fix debugfs readBartosz Golaszewski1-4/+6
The debugfs read callback must advance ppos or users using read() on the file descriptor will never get the EOL. This wasn't spotted before as I was using busybox cat for testing which uses sendfile() internally and only noticed it now when switched to cat from coreutils. Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27Revert "gpio: use new gpio_set_config() helper in more places"Andrew Jeffery1-2/+2
gpio-aspeed implements support for PIN_CONFIG_INPUT_DEBOUNCE. As of v5.1-rc1 we're seeing the following when booting a Romulus BMC kernel: > [ 21.373137] ------------[ cut here ]------------ > [ 21.374545] WARNING: CPU: 0 PID: 1 at drivers/gpio/gpio-aspeed.c:834 unregister_allocated_timer+0x38/0x94 > [ 21.376181] No timer allocated to offset 74 > [ 21.377672] CPU: 0 PID: 1 Comm: swapper Not tainted 5.1.0-rc1-dirty #6 > [ 21.378800] Hardware name: Generic DT based system > [ 21.379965] Backtrace: > [ 21.381024] [<80107d44>] (dump_backtrace) from [<80107f78>] (show_stack+0x20/0x24) > [ 21.382713] r7:8038b720 r6:00000009 r5:00000000 r4:87897c64 > [ 21.383815] [<80107f58>] (show_stack) from [<80656398>] (dump_stack+0x20/0x28) > [ 21.385042] [<80656378>] (dump_stack) from [<80115f1c>] (__warn.part.3+0xb4/0xdc) > [ 21.386253] [<80115e68>] (__warn.part.3) from [<80115fb0>] (warn_slowpath_fmt+0x6c/0x90) > [ 21.387471] r6:00000342 r5:807f8758 r4:80a07008 > [ 21.388278] [<80115f48>] (warn_slowpath_fmt) from [<8038b720>] (unregister_allocated_timer+0x38/0x94) > [ 21.389809] r3:0000004a r2:807f8774 > [ 21.390526] r7:00000000 r6:0000000a r5:60000153 r4:0000004a > [ 21.391601] [<8038b6e8>] (unregister_allocated_timer) from [<8038baac>] (aspeed_gpio_set_config+0x330/0x48c) > [ 21.393248] [<8038b77c>] (aspeed_gpio_set_config) from [<803840b0>] (gpiod_set_debounce+0xe8/0x114) > [ 21.394745] r10:82ee2248 r9:00000000 r8:87b63a00 r7:00001388 r6:87947320 r5:80729310 > [ 21.396030] r4:879f64a0 > [ 21.396499] [<80383fc8>] (gpiod_set_debounce) from [<804b4350>] (gpio_keys_probe+0x69c/0x8e0) > [ 21.397715] r7:845d94b8 r6:00000001 r5:00000000 r4:87b63a1c > [ 21.398618] [<804b3cb4>] (gpio_keys_probe) from [<8040eeec>] (platform_dev_probe+0x44/0x80) > [ 21.399834] r10:00000003 r9:80a3a8b0 r8:00000000 r7:00000000 r6:80a7f9dc r5:80a3a8b0 > [ 21.401163] r4:8796bc10 > [ 21.401634] [<8040eea8>] (platform_drv_probe) from [<8040d0d4>] (really_probe+0x208/0x3dc) > [ 21.402786] r5:80a7f8d0 r4:8796bc10 > [ 21.403547] [<8040cecc>] (really_probe) from [<8040d7a4>] (driver_probe_device+0x130/0x170) > [ 21.404744] r10:0000007b r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:8796bc10 > [ 21.405854] r4:80a3a8b0 > [ 21.406324] [<8040d674>] (driver_probe_device) from [<8040da8c>] (device_driver_attach+0x68/0x70) > [ 21.407568] r9:8093683c r8:00000000 r7:80a07008 r6:80a3a8b0 r5:00000000 r4:8796bc10 > [ 21.408877] [<8040da24>] (device_driver_attach) from [<8040db14>] (__driver_attach+0x80/0x150) > [ 21.410327] r7:80a07008 r6:8796bc10 r5:00000001 r4:80a3a8b0 > [ 21.411294] [<8040da94>] (__driver_attach) from [<8040b20c>] (bus_for_each_dev+0x80/0xc4) > [ 21.412641] r7:80a07008 r6:8040da94 r5:80a3a8b0 r4:87966f30 > [ 21.413580] [<8040b18c>] (bus_for_each_dev) from [<8040dc0c>] (driver_attach+0x28/0x30) > [ 21.414943] r7:00000000 r6:87b411e0 r5:80a33fc8 r4:80a3a8b0 > [ 21.415927] [<8040dbe4>] (driver_attach) from [<8040bbf0>] (bus_add_driver+0x14c/0x200) > [ 21.417289] [<8040baa4>] (bus_add_driver) from [<8040e2b4>] (driver_register+0x84/0x118) > [ 21.418652] r7:80a60ae0 r6:809226b8 r5:80a07008 r4:80a3a8b0 > [ 21.419652] [<8040e230>] (driver_register) from [<8040fc28>] (__platform_driver_register+0x3c/0x50) > [ 21.421193] r5:80a07008 r4:809525f8 > [ 21.421990] [<8040fbec>] (__platform_driver_register) from [<809226d8>] (gpio_keys_init+0x20/0x28) > [ 21.423447] [<809226b8>] (gpio_keys_init) from [<8090128c>] (do_one_initcall+0x80/0x180) > [ 21.424886] [<8090120c>] (do_one_initcall) from [<80901538>] (kernel_init_freeable+0x1ac/0x26c) > [ 21.426354] r8:80a60ae0 r7:80a60ae0 r6:8093685c r5:00000008 r4:809525f8 > [ 21.427579] [<8090138c>] (kernel_init_freeable) from [<8066d9a0>] (kernel_init+0x18/0x11c) > [ 21.428819] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:8066d988 > [ 21.429947] r4:00000000 > [ 21.430415] [<8066d988>] (kernel_init) from [<801010e8>] (ret_from_fork+0x14/0x2c) > [ 21.431666] Exception stack(0x87897fb0 to 0x87897ff8) > [ 21.432877] 7fa0: 00000000 00000000 00000000 00000000 > [ 21.434446] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 > [ 21.436052] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 > [ 21.437308] r5:8066d988 r4:00000000 > [ 21.438102] ---[ end trace d7d7ac3a80567d0e ]--- We only hit unregister_allocated_timer() if the argument to aspeed_gpio_set_config() is 0, but we can't be calling through gpiod_set_debounce() from gpio_keys_probe() unless the gpio-keys button has a non-zero debounce interval. Commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") spreads the use of gpio_set_config() to the debounce and transitory state configuration paths. The implementation of gpio_set_config() is: > static int gpio_set_config(struct gpio_chip *gc, unsigned offset, > enum pin_config_param mode) > { > unsigned long config = { PIN_CONF_PACKED(mode, 0) }; > > return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP; > } Here it packs its own config value with a fixed argument of 0; this is incorrect behaviour for implementing the debounce and transitory functions, and the debounce and transitory gpio_set_config() call-sites now have an undetected type mismatch as they both already pack their own config parameter (i.e. what gets passed is not an `enum pin_config_param`). Indeed this can be seen in the small diff for 6581eaf0e890: > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c > index de595fa31a1a..1f239aac43df 100644 > --- a/drivers/gpio/gpiolib.c > +++ b/drivers/gpio/gpiolib.c > @@ -2725,7 +2725,7 @@ int gpiod_set_debounce(struct gpio_desc *desc, unsigned debounce) > } > > config = pinconf_to_config_packed(PIN_CONFIG_INPUT_DEBOUNCE, debounce); > - return chip->set_config(chip, gpio_chip_hwgpio(desc), config); > + return gpio_set_config(chip, gpio_chip_hwgpio(desc), config); > } > EXPORT_SYMBOL_GPL(gpiod_set_debounce); > > @@ -2762,7 +2762,7 @@ int gpiod_set_transitory(struct gpio_desc *desc, bool transitory) > packed = pinconf_to_config_packed(PIN_CONFIG_PERSIST_STATE, > !transitory); > gpio = gpio_chip_hwgpio(desc); > - rc = chip->set_config(chip, gpio, packed); > + rc = gpio_set_config(chip, gpio, packed); > if (rc == -ENOTSUPP) { > dev_dbg(&desc->gdev->dev, "Persistence not supported for GPIO %d\n", > gpio); Revert commit 6581eaf0e890 ("gpio: use new gpio_set_config() helper in more places") to restore correct behaviour for gpiod_set_debounce() and gpiod_set_transitory(). Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Signed-off-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-03-27drm/i915/selftests: Fix an IS_ERR() vs NULL checkDan Carpenter1-1/+1
The live_context() function returns error pointers. It never returns NULL. Fixes: 9c1477e83e62 ("drm/i915/selftests: Exercise adding requests to a full GGTT") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20190326050843.GA20038@kadam (cherry picked from commit 602cbe8efc523ba56e1f41e8f74c7aa835672593) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2019-03-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller22-128/+1673
Alexei Starovoitov says: ==================== pull-request: bpf-next 2019-03-26 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) introduce bpf_tcp_check_syncookie() helper for XDP and tc, from Lorenz. 2) allow bpf_skb_ecn_set_ce() in tc, from Peter. 3) numerous bpf tc tunneling improvements, from Willem. 4) and other miscellaneous improvements from Adrian, Alan, Daniel, Ivan, Stanislav. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-27RISC-V: Always compile mm/init.c with cmodel=medany and notraceAnup Patel4-11/+34
The Linux RISC-V 32bit kernel is broken after we moved setup_vm() from kernel/setup.c to mm/init.c because Linux RISC-V 32bit kernel by default uses cmodel=medlow which results in a non-position-independent setup_vm(). This patch fixes Linux RISC-V 32bit kernel booting by: 1. Forcing cmodel=medany for mm/init.c 2. Moving remaing MM-related stuff va_pa_offset, pfn_base and empty_zero_page from kernel/setup.c to mm/init.c Further, the setup_vm() cannot handle GCC instrumentation for FTRACE so we disable it for mm/init.c by not using "-pg" compiler flag. Fixes: 6f1e9e946f0b ("RISC-V: Move setup_vm() to mm/init.c") Suggested-by: Christoph Hellwig <hch@lst.de> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-27riscv: fix accessing 8-byte variable from RV32Alan Kao1-1/+1
A memory save operation to 8-byte variable in RV32 is divided into two sw instructions in the put_user macro. The current fixup returns execution flow to the second sw instead of the one after it. This patch fixes this fixup code according to the load access part. Signed-off-by: Alan Kao<alankao@andestech.com> Cc: Greentime Hu <greentime@andestech.com> Cc: Vincent Chen <deanbo422@gmail.com> Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2019-03-27powerpc/pseries/energy: Use OF accessor functions to read ibm,drc-indexesGautham R. Shenoy1-9/+18
In cpu_to_drc_index() in the case when FW_FEATURE_DRC_INFO is absent, we currently use of_read_property() to obtain the pointer to the array corresponding to the property "ibm,drc-indexes". The elements of this array are of type __be32, but are accessed without any conversion to the OS-endianness, which is buggy on a Little Endian OS. Fix this by using of_property_read_u32_index() accessor function to safely read the elements of the array. Fixes: e83636ac3334 ("pseries/drc-info: Search DRC properties for CPU indexes") Cc: stable@vger.kernel.org # v4.16+ Reported-by: Pavithra R. Prakash <pavrampu@in.ibm.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Reviewed-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> [mpe: Make the WARN_ON a WARN_ON_ONCE so it's not retriggerable] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-03-27fm10k: Fix a potential NULL pointer dereferenceYue Haibing1-0/+2
Syzkaller report this: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 4378 Comm: syz-executor.0 Tainted: G C 5.0.0+ #5 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 RIP: 0010:__lock_acquire+0x95b/0x3200 kernel/locking/lockdep.c:3573 Code: 00 0f 85 28 1e 00 00 48 81 c4 08 01 00 00 5b 5d 41 5c 41 5d 41 5e 41 5f c3 4c 89 ea 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 24 00 00 49 81 7d 00 e0 de 03 a6 41 bc 00 00 RSP: 0018:ffff8881e3c07a40 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000080 RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8881e3c07d98 R11: ffff8881c7f21f80 R12: 0000000000000001 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000001 FS: 00007fce2252e700(0000) GS:ffff8881f2400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fffc7eb0228 CR3: 00000001e5bea002 CR4: 00000000007606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: lock_acquire+0xff/0x2c0 kernel/locking/lockdep.c:4211 __mutex_lock_common kernel/locking/mutex.c:925 [inline] __mutex_lock+0xdf/0x1050 kernel/locking/mutex.c:1072 drain_workqueue+0x24/0x3f0 kernel/workqueue.c:2934 destroy_workqueue+0x23/0x630 kernel/workqueue.c:4319 __do_sys_delete_module kernel/module.c:1018 [inline] __se_sys_delete_module kernel/module.c:961 [inline] __x64_sys_delete_module+0x30c/0x480 kernel/module.c:961 do_syscall_64+0x9f/0x450 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x462e99 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fce2252dc58 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 000000000073bf00 RCX: 0000000000462e99 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000140 RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fce2252e6bc R13: 00000000004bcca9 R14: 00000000006f6b48 R15: 00000000ffffffff If alloc_workqueue fails, it should return -ENOMEM, otherwise may trigger this NULL pointer dereference while unloading drivers. Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 0a38c17a21a0 ("fm10k: Remove create_workqueue") Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27i40e: fix WoL support checkStefan Assmann1-2/+1
The current check for WoL on i40e is broken. Code comment says only magic packet is supported, so only check for that. Fixes: 540a152da762 (i40e/ixgbe/igb: fail on new WoL flag setting WAKE_MAGICSECURE) Signed-off-by: Stefan Assmann <sassmann@kpanic.de> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27ixgbe: fix mdio bus registrationIvan Vecera1-7/+9
The ixgbe ignores errors returned from mdiobus_register() and leaves adapter->mii_bus non-NULL and MDIO bus state as MDIOBUS_ALLOCATED. This triggers a BUG from mdiobus_unregister() during ixgbe_remove() call. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27igb: Fix WARN_ONCE on runtime suspendArvind Sankar2-49/+10
The runtime_suspend device callbacks are not supposed to save configuration state or change the power state. Commit fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") changed the driver to not save configuration state during runtime suspend, however the driver callback still put the device into a low-power state. This causes a warning in the pci pm core and results in pci_pm_runtime_suspend not calling pci_save_state or pci_finish_runtime_suspend. Fix this by not changing the power state either, leaving that to pci pm core, and make the same change for suspend callback as well. Also move a couple of defines into the appropriate header file instead of inline in the .c file. Fixes: fb29f76cc566 ("igb: Fix an issue that PME is not enabled during runtime suspend") Signed-off-by: Arvind Sankar <niveditas98@gmail.com> Reviewed-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27ice: Remove "2 BITS" commentAnirudh Venkataramanan1-6/+6
Some enums in ice_tx_desc_cmd_bits have a trailing /* 2 BITS */ comment, but the value has just one bit set (ex. ICE_TX_DESC_CMD_L4T_EOFT_SCTP has the value 0x200 (i.e. only bit 9 is set). This is confusing and misleading. So remove the comment. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27ice: Update comment regarding the ITR_GRAN_SBrett Creeley1-1/+1
Since the driver now hard codes the ITR granularity to 2 us in the GLINT_CTL register the comment next to ITR_GRAN_S needs to be updated. Signed-off-by: Brett Creeley <brett.creeley@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27ice: Update function header for __ice_vsi_get_qsAnirudh Venkataramanan1-4/+3
Remove some redundant text in the function header for __ice_vsi_get_qs Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-03-27i40e: fix i40e_ptp_adjtime when given a negative deltaJacob Keller1-2/+3
Commit 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) claims to be cleaning up references to 32-bit timespecs. The actual contents of the commit make no sense, as it converts a call to timespec64_add into timespec64_add_ns. This would seem ok, if (a) the change was documented in the commit message, and (b) timespec64_add_ns supported negative numbers. timespec64_add_ns doesn't work with signed deltas, because the implementation is based around iter_div_u64_rem. This change resulted in a regression where i40e_ptp_adjtime would interpret small negative adjustments as large positive additions, resulting in incorrect behavior. This commit doesn't appear to fix anything, is not well explained, and introduces a bug, so lets just revert it. Reverts: 0ac30ce43323 ("i40e: fix up 32 bit timespec references", 2017-07-26) Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 08:00:49 +0300