summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-02-15Merge tag 'io_uring-5.6-2020-02-14' of git://git.kernel.dk/linux-blockLinus Torvalds3-113/+284
Pull io_uring fixes from Jens Axboe: "Here's a set of fixes for io_uring: - Various fixes with cleanups from Pavel, fixing corner cases where we're not correctly dealing with iovec cleanup. - Clarify that statx/openat/openat2 don't accept fixed files - Buffered raw device write EOPTNOTSUPP fix - Ensure async workers grab current->fs - A few task exit fixes with pending requests that grab the file table - send/recvmsg async load fix - io-wq offline node setup fix - CQ overflow flush in poll" * tag 'io_uring-5.6-2020-02-14' of git://git.kernel.dk/linux-block: (21 commits) io_uring: prune request from overflow list on flush io-wq: don't call kXalloc_node() with non-online node io_uring: retain sockaddr_storage across send/recvmsg async punt io_uring: cancel pending async work if task exits io-wq: add io_wq_cancel_pid() to cancel based on a specific pid io-wq: make io_wqe_cancel_work() take a match handler io_uring: fix openat/statx's filename leak io_uring: fix double prep iovec leak io_uring: fix async close() with f_op->flush() io_uring: allow AT_FDCWD for non-file openat/openat2/statx io_uring: grab ->fs as part of async preparation io-wq: add support for inheriting ->fs io_uring: retry raw bdev writes if we hit -EOPNOTSUPP io_uring: add cleanup for openat()/statx() io_uring: fix iovec leaks io_uring: remove unused struct io_async_open io_uring: flush overflowed CQ events in the io_uring_poll() io_uring: statx/openat/openat2 don't support fixed files io_uring: fix deferred req iovec leak io_uring: fix 1-bit bitfields to be unsigned ...
2020-02-15drm/edid: Add a FIXME about DispID CEA data block revisionVille Syrjälä1-0/+7
I don't understand what the DispID CEA data block revision means. The spec doesn't say. I guess some DispID must have a value of >= 3 in there or else we generally wouldn't even parse the CEA data blocks. Or does all this code actually not do anything? Cc: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-6-ville.syrjala@linux.intel.com Reviewed-by: Andres Rodriguez <andresx7@gmail.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-15drm/edid: Document why we don't bounds check the DispID CEA block start/endVille Syrjälä1-0/+4
After much head scratching I managed to convince myself that for_each_displayid_db() has already done the bounds checks for the DispID CEA data block. Which is why we don't need to repeat them in cea_db_offsets(). To avoid having to go through that pain again in the future add a comment which explains this fact. Cc: Andres Rodriguez <andresx7@gmail.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-5-ville.syrjala@linux.intel.com Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-15drm/edid: Clear out spurious whitespaceVille Syrjälä1-3/+3
Nuke some whitespace that shouldn't be there. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-4-ville.syrjala@linux.intel.com Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-15drm/edid: Introduce is_detailed_timing_descritor()Ville Syrjälä1-18/+24
Let's introduce is_detailed_timing_descritor() as the opposite counterpart of is_display_descriptor(). Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-3-ville.syrjala@linux.intel.com Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-15drm/edid: Don't accept any old garbage as a display descriptorVille Syrjälä1-24/+41
Currently we assume any 18 byte descriptor to be a display descritor if only the tag byte matches the expected value. But for detailed timing descriptors that same byte is just the lower 8 bits of hblank, and as such can match any display descriptor tag. To properly validate that the 18 byte descriptor is in fact a display descriptor we must also examine bytes 0-2 (just byte 1 should actually suffice but the spec does say that bytes 0 and 2 must also always be zero for display descriptors so we check those too). Unlike Allen's original proposed patch to just fix is_rb() we roll this out across the board to fix everything. Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-2-ville.syrjala@linux.intel.com Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-15drm/edid: Check the number of detailed timing descriptors in the CEA ext blockVille Syrjälä1-1/+4
CEA-861 says : "d = offset for the byte following the reserved data block. If no data is provided in the reserved data block, then d=4. If no DTDs are provided, then d=0." So let's not look for DTDs when d==0. In fact let's just make that <4 since those values would just mean that he DTDs overlap the block header. And let's also check that d isn't so big as to declare the descriptors to live past the block end, although the code does already survive that case as we'd just end up with a negative number of descriptors and the loop would not do anything. Cc: Allen Chen <allen.chen@ite.com.tw> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200124200231.10517-1-ville.syrjala@linux.intel.com Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Uma Shankar <uma.shankar@intel.com>
2020-02-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds61-859/+648
Pull networking fixes from David Miller: 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew Lunn. 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen. 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet. 4) Add some missing netlink attribute validation to matchall and flower, from Davide Caratti. 5) Send icmp responses properly when NAT has been applied to the frame before we get to the tunnel emitting the icmp, from Jason Donenfeld. 6) Make sure there is enough SKB headroom when adding dsa tags for qca and ar9331. From Per Forlin. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) netdevice.h: fix all kernel-doc and Sphinx warnings net: dsa: tag_ar9331: Make sure there is headroom for tag net: dsa: tag_qca: Make sure there is headroom for tag net, ip6_tunnel: enhance tunnel locate with link check net/smc: no peer ID in CLC decline for SMCD net/smc: transfer fasync_list in case of fallback net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples() net: hns3: fix VF bandwidth does not take effect in some case net: hns3: add management table after IMP reset mac80211: fix wrong 160/80+80 MHz setting cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE xfrm: interface: use icmp_ndo_send helper wireguard: device: use icmp_ndo_send helper sunvnet: use icmp_ndo_send helper gtp: use icmp_ndo_send helper icmp: introduce helper for nat'd source address in network device context net/sched: flower: add missing validation of TCA_FLOWER_FLAGS net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS net/flow_dissector: remove unexist field description page_pool: refill page when alloc.count of pool is zero ...
2020-02-14Merge tag 'pm-5.6-rc2' of ↵Linus Torvalds10-42/+177
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Fix three issues related to the handling of wakeup events signaled through the ACPI SCI while suspended to idle (Rafael Wysocki) and unexport an internal cpufreq variable (Yangtao Li)" * tag 'pm-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system ACPICA: Introduce acpi_any_gpe_status_set() ACPI: PM: s2idle: Avoid possible race related to the EC GPE ACPI: EC: Fix flushing of pending work cpufreq: Make cpufreq_global_kobject static
2020-02-14Merge tag 'sound-5.6-rc2' of ↵Linus Torvalds7-46/+105
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The only common change is the regression fix of the previous PCM fix patch for managed buffers while the rest are usual suspects, USB-audio and HD-audio device-specific quirks. The change for UAC2 clock validation workaround became a bit big, but the changes are fairly straightforward" * tag 'sound-5.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: pcm: Fix double hw_free calls ALSA: usb-audio: Add clock validity quirk for Denon MC7000/MCX8000 ALSA: hda/realtek - Fix silent output on MSI-GL73 ALSA: hda/realtek - Add more codec supported Headset Button ALSA: usb-audio: Apply sample rate quirk for Audioengine D1 ALSA: usb-audio: Fix UAC2/3 effect unit parsing ALSA: usb-audio: Apply 48kHz fixed rate playback for Jabra Evolve 65 headset
2020-02-14Merge tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drmLinus Torvalds51-251/+1131
Pull drm fixes from Dave Airlie: "The core has a build fix for edid code on certain compilers/arches/, one MST fix and one vgem fix. Regular amdgpu fixes, and a couple of small driver fixes. The i915 fixes are bit larger than normal for this stage, but they were having CI issues last week, and they hadn't sent any fixes last week due to this. core: - edid build fix mst: - fix NULL ptr deref vgem: - fix close after free msm: - better dma-api usage sun4i: - disable allow_fb_modifiers amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix i915: - dsi/acpi fixes - gvt locking and allocation fixes - gem/gt fixes - bios timing parameters fix" * tag 'drm-fixes-2020-02-14' of git://anongit.freedesktop.org/drm/drm: (50 commits) drm/i915: Mark the removal of the i915_request from the sched.link drm/i915/execlists: Reclaim the hanging virtual request drm/i915/execlists: Take a reference while capturing the guilty request drm/i915/execlists: Offline error capture drm/i915/gt: Allow temporary suspension of inflight requests drm/i915: Keep track of request among the scheduling lists drm/i915/gem: Tighten checks and acquiring the mmap object drm/i915: Fix preallocated barrier list append drm/i915/gt: Acquire ce->active before ce->pin_count/ce->pin_mutex drm/i915: Tighten atomicity of i915_active_acquire vs i915_active_release drm/i915: Stub out i915_gpu_coredump_put drm/amdgpu:/navi10: use the ODCAP enum to index the caps array drm/amdgpu: update smu_v11_0_pptable.h drm/amdgpu: correct comment to clear up the confusion drm/amd/display: DCN2.x Do not program DPPCLK if same value drm/amd/display: Don't map ATOM_ENABLE to ATOM_INIT drm/amdgpu/vcn2.5: fix warning drm/amdgpu: limit GDS clearing workaround in cold boot sequence drm/amdgpu: fix amdgpu pmu to use hwc->config instead of hwc->conf amdgpu: Prevent build errors regarding soft/hard-float FP ABI tags ...
2020-02-14IB/mlx5: Use div64_u64 for num_var_hw_entries calculationJason Gunthorpe1-1/+1
On i386: ERROR: "__udivdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! ERROR: "__divdi3" [drivers/infiniband/hw/mlx5/mlx5_ib.ko] undefined! Fixes: f164be8c0366 ("IB/mlx5: Extend caps stage to handle VAR capabilities") Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Reported-by: Alexander Lobakin <alobakin@dlink.ru> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2020-02-14drm/mcde: Fix Sphinx formattingJonathan Neuschäfer1-4/+5
- Format the pipe diagram as a monospace block. - Fix formatting of the list. Without the empty line, the first dash is not parsed as a bullet point. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20200214163815.25442-1-j.neuschaefer@gmx.net
2020-02-14nvme: fix the parameter order for nvme_get_log in nvme_get_fw_slot_infoYi Zhang1-1/+1
nvme fw-activate operation will get bellow warning log, fix it by update the parameter order [ 113.231513] nvme nvme0: Get FW SLOT INFO log error Fixes: 0e98719b0e4b ("nvme: simplify the API for getting log pages") Reported-by: Sujith Pandel <sujith_pandel@dell.com> Reviewed-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Yi Zhang <yi.zhang@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/pci: move cqe check after device shutdownKeith Busch1-5/+18
Many users have reported nvme triggered irq_startup() warnings during shutdown. The driver uses the nvme queue's irq to synchronize scanning for completions, and enabling an interrupt affined to only offline CPUs triggers the alarming warning. Move the final CQE check to after disabling the device and all registered interrupts have been torn down so that we do not have any IRQ to synchronize. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206509 Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme: prevent warning triggered by nvme_stop_keep_aliveNigel Kirkland3-7/+7
Delayed keep alive work is queued on system workqueue and may be cancelled via nvme_stop_keep_alive from nvme_reset_wq, nvme_fc_wq or nvme_wq. Check_flush_dependency detects mismatched attributes between the work-queue context used to cancel the keep alive work and system-wq. Specifically system-wq does not have the WQ_MEM_RECLAIM flag, whereas the contexts used to cancel keep alive work have WQ_MEM_RECLAIM flag. Example warning: workqueue: WQ_MEM_RECLAIM nvme-reset-wq:nvme_fc_reset_ctrl_work [nvme_fc] is flushing !WQ_MEM_RECLAIM events:nvme_keep_alive_work [nvme_core] To avoid the flags mismatch, delayed keep alive work is queued on nvme_wq. However this creates a secondary concern where work and a request to cancel that work may be in the same work queue - namely err_work in the rdma and tcp transports, which will want to flush/cancel the keep alive work which will now be on nvme_wq. After reviewing the transports, it looks like err_work can be moved to nvme_reset_wq. In fact that aligns them better with transition into RESETTING and performing related reset work in nvme_reset_wq. Change nvme-rdma and nvme-tcp to perform err_work in nvme_reset_wq. Signed-off-by: Nigel Kirkland <nigel.kirkland@broadcom.com> Signed-off-by: James Smart <jsmart2021@gmail.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14nvme/tcp: fix bug on double requeue when send failsAnton Eidelman1-1/+6
When nvme_tcp_io_work() fails to send to socket due to connection close/reset, error_recovery work is triggered from nvme_tcp_state_change() socket callback. This cancels all the active requests in the tagset, which requeues them. The failed request, however, was ended and thus requeued individually as well unless send returned -EPIPE. Another return code to be treated the same way is -ECONNRESET. Double requeue caused BUG_ON(blk_queued_rq(rq)) in blk_mq_requeue_request() from either the individual requeue of the failed request or the bulk requeue from blk_mq_tagset_busy_iter(, nvme_cancel_request, ); Signed-off-by: Anton Eidelman <anton@lightbitslabs.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-02-14cifs: make sure we do not overflow the max EA buffer sizeRonnie Sahlberg1-1/+34
RHBZ: 1752437 Before we add a new EA we should check that this will not overflow the maximum buffer we have available to read the EAs back. Otherwise we can get into a situation where the EAs are so big that we can not read them back to the client and thus we can not list EAs anymore or delete them. Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org>
2020-02-14cifs: enable change notification for SMB2.1 dialectSteve French1-0/+1
It was originally enabled only for SMB3 or later dialects, but had requests to add it to SMB2.1 mounts as well given the large number of systems at that dialect level. Signed-off-by: Steve French <stfrench@microsoft.com> Reported-by: L Walsh <cifs@tlinx.org> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
2020-02-14drm/print: Delete a few unused shouting macrosDaniel Vetter1-26/+0
We want to go over to the new lowercase ones, encourage that a bit more. v2: Remove the accidentally included hunk from some WIP branch this was based on (Jani&Sam). Cc: Jani Nikula <jani.nikula@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200214090428.2929833-1-daniel.vetter@ffwll.ch
2020-02-14netdevice.h: fix all kernel-doc and Sphinx warningsRandy Dunlap1-1/+15
Eliminate all kernel-doc and Sphinx warnings in <linux/netdevice.h>. Fixes these warnings: ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gso_partial_features' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'l3mdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xfrmdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'tlsdev_ops' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'name_assign_type' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'ieee802154_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'mpls_ptr' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_prog' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'gro_flush_timeout' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xdp_bulkq' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_cpus_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'xps_rxqs_map' not described in 'net_device' ../include/linux/netdevice.h:2100: warning: Function parameter or member 'qdisc_hash' not described in 'net_device' ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. ../include/linux/netdevice.h:3552: WARNING: Inline emphasis start-string without end-string. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge branch 'dsa-headroom'David S. Miller2-2/+2
Per Forlin says: ==================== net: dsa: Make sure there is headroom for tag Sorry for re-posting yet another time.... I manage to include multiple email-senders and forgot to include cover-letter. Let's hope everyhthing is in order this time. Fix two tag drivers to make sure there is headroom for the tag data. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: dsa: tag_ar9331: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: dsa: tag_qca: Make sure there is headroom for tagPer Forlin1-1/+1
Passing tag size to skb_cow_head will make sure there is enough headroom for the tag data. This change does not introduce any overhead in case there is already available headroom for tag. Signed-off-by: Per Forlin <perfn@axis.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net, ip6_tunnel: enhance tunnel locate with link checkWilliam Dauchy1-21/+47
With ipip, it is possible to create an extra interface explicitly attached to a given physical interface: # ip link show tunl0 4: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 # ip link add tunl1 type ipip dev eth0 # ip link show tunl1 6: tunl1@eth0: <NOARP> mtu 1480 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ipip 0.0.0.0 brd 0.0.0.0 But it is not possible with ip6tnl: # ip link show ip6tnl0 5: ip6tnl0@NONE: <NOARP> mtu 1452 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/tunnel6 :: brd :: # ip link add ip6tnl1 type ip6tnl dev eth0 RTNETLINK answers: File exists This patch aims to make it possible by adding link comparaison in both tunnel locate and lookup functions; we also modify mtu calculation when attached to an interface with a lower mtu. This permits to make use of x-netns communication by moving the newly created tunnel in a given netns. Signed-off-by: William Dauchy <w.dauchy@criteo.com> Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14drm/sun4i: dsi: Remove incorrect use of runtime PMSamuel Holland1-63/+26
The driver currently uses runtime PM to perform some of the module initialization and cleanup. This has three problems: 1) There is no Kconfig dependency on CONFIG_PM, so if runtime PM is disabled, the driver will not work at all, since the module will never be initialized. 2) The driver does not ensure that the device is suspended when sun6i_dsi_probe() fails or when sun6i_dsi_remove() is called. It simply disables runtime PM. From the docs of pm_runtime_disable(): The device can be either active or suspended after its runtime PM has been disabled. And indeed, the device will likely still be active if sun6i_dsi_probe fails. For example, if the panel driver is not yet loaded, we have the following sequence: sun6i_dsi_probe() pm_runtime_enable() mipi_dsi_host_register() of_mipi_dsi_device_add(child) ...device_add()... __device_attach() pm_runtime_get_sync(dev->parent) -> Causes resume bus_for_each_drv() __device_attach_driver() -> No match for panel pm_runtime_put(dev->parent) -> Async idle request component_add() __component_add() try_to_bring_up_masters() try_to_bring_up_master() sun4i_drv_bind() component_bind_all() component_bind() sun6i_dsi_bind() -> Fails with -EPROBE_DEFER mipi_dsi_host_unregister() pm_runtime_disable() __pm_runtime_disable() __pm_runtime_barrier() -> Idle request is still pending cancel_work_sync() -> DSI host is *not* suspended! Since the device is not suspended, the clock and regulator are never disabled. The imbalance causes a WARN at devres free time. 3) The driver relies on being suspended when sun6i_dsi_encoder_enable() is called. The resume callback has a comment that says: Some part of it can only be done once we get a number of lanes, see sun6i_dsi_inst_init And then part of the resume callback only runs if dsi->device is not NULL (that is, if sun6i_dsi_attach() has been called). However, as the above call graph shows, the resume callback is guaranteed to be called before sun6i_dsi_attach(); it is called before child devices get their drivers attached. Therefore, part of the controller initialization will only run if the device is suspended between the calls to mipi_dsi_host_register() and component_add() (which ends up calling sun6i_dsi_encoder_enable()). Again, as shown by the above call graph, this is not the case. It appears that the controller happens to work because it is still initialized by the bootloader. Because the connector is hardcoded to always be connected, the device's runtime PM reference is not dropped until system suspend, when sun4i_drv_drm_sys_suspend() ends up calling sun6i_dsi_encoder_disable(). However, that is done as a system sleep PM hook, and at that point the system PM core has already taken another runtime PM reference, so sun6i_dsi_runtime_suspend() is not called. Likewise, by the time the PM core releases its reference, sun4i_drv_drm_sys_resume() has already re-enabled the encoder. So after system suspend and resume, we have *still never called* sun6i_dsi_inst_init(), and now that the rest of the display pipeline has been reset, the DSI host is unable to communicate with the panel, causing VBLANK timeouts. Fix all of these issues by inlining the runtime PM hooks into the encoder enable/disable functions, which are guaranteed to run after a panel is attached. This allows sun6i_dsi_inst_init() to be called unconditionally. Furthermore, this causes the hardware to be turned off during system suspend and reinitialized on resume, which was not happening before. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-4-samuel@sholland.org
2020-02-14Merge tag 'sti-dt-for-5.7-round1' of ↵Olof Johansson2-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes STi dt fixes: ------------- - remove deprecated Synopsys PHY dt properties - fix sound frame-inversion property * tag 'sti-dt-for-5.7-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: sti: fixup sound frame-inversion for stihxxx-b2120.dtsi ARM: dts: sti: Remove deprecated snps PHY properties for stih410-b2260 Link: https://lore.kernel.org/r/afe20a6d-061b-a93c-2e60-206b0e8d0f81@st.com Signed-off-by: Olof Johansson <olof@lixom.net>
2020-02-14drm/sun4i: dsi: Allow binding the host without a panelSamuel Holland2-6/+17
Currently, the DSI host blocks binding the display pipeline until the panel is available. This unnecessarily prevents other display outpus from working, and adds logspam to dmesg when the panel driver is built as a module (the component master is unsuccessfully brought up several times during boot). Flip the dependency, instead requiring the host to be bound before the panel is attached. The panel driver provides no functionality outside of the display pipeline anyway. Since the panel is now probed after the DRM connector, we need a hotplug event to turn on the connector after the panel is attached. This has the added benefit of fixing panel module removal/insertion. Previously, the panel would be turned off when its module was removed. But because the connector state was hardcoded, nothing knew to turn the panel back on when it was re-attached. Now, with hotplug events available, the connector state will follow the panel module state, and the panel will be re-enabled properly. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-3-samuel@sholland.org
2020-02-14drm/sun4i: dsi: Use NULL to signify "no panel"Samuel Holland1-6/+8
The continued use of an ERR_PTR to signify "no panel" outside of sun6i_dsi_attach is confusing because it is a double negative. Because the connector always reports itself as connected, there is also the possibility of sending an ERR_PTR to drm_panel_get_modes(), which would crash. Solve both of these by only storing the panel pointer if it is valid. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
2020-02-14drm/sun4i: dsi: Remove unused drv from driver contextSamuel Holland2-5/+0
This member is never used, so remove it. Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support") Signed-off-by: Samuel Holland <samuel@sholland.org> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-1-samuel@sholland.org
2020-02-14Merge tag 'mac80211-for-net-2020-02-14' of ↵David S. Miller7-22/+44
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Just a few fixes: * avoid running out of tracking space for frames that need to be reported to userspace by using more bits * fix beacon handling suppression by adding some relevant elements to the CRC calculation * fix quiet mode in action frames * fix crash in ethtool for virt_wifi and similar * add a missing policy entry * fix 160 & 80+80 bandwidth to take local capabilities into account ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge branch 'smc-fixes'David S. Miller2-1/+5
Karsten Graul says: ==================== net/smc: fixes for -net Fix a syzbot finding and a problem with the CLC handshake content. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: no peer ID in CLC decline for SMCDUrsula Braun1-1/+3
Just SMCR requires a CLC Peer ID, but not SMCD. The field should be zero for SMCD. Fixes: c758dfddc1b5 ("net/smc: add SMC-D support in CLC messages") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net/smc: transfer fasync_list in case of fallbackUrsula Braun1-0/+2
SMC does not work together with FASTOPEN. If sendmsg() is called with flag MSG_FASTOPEN in SMC_INIT state, the SMC-socket switches to fallback mode. To handle the previous ioctl FIOASYNC call correctly in this case, it is necessary to transfer the socket wait queue fasync_list to the internal TCP socket. Reported-by: syzbot+4b1fe8105f8044a26162@syzkaller.appspotmail.com Fixes: ee9dfbef02d18 ("net/smc: handle sockopts forcing fallback") Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14Merge branch 'hns3-fixes'David S. Miller2-7/+17
Huazhong Tan says: ==================== net: hns3: fixes for -net This series includes three bugfixes for the HNS3 ethernet driver. [patch 1] fixes a management table lost issue after IMP reset. [patch 2] fixes a VF bandwidth configuration not work problem. [patch 3] fixes a problem related to IPv6 address copying. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()Guangbin Huang1-6/+9
The IPv6 address defined in struct in6_addr is specified as big endian, but there is no specified endian in struct hclge_fd_rule_tuples, so it will cause a problem if directly use memcpy() to copy ipv6 address between these two structures since this field in struct hclge_fd_rule_tuples is little endian. This patch fixes this problem by using be32_to_cpu() to convert endian of IPv6 address of struct in6_addr before copying. Fixes: d93ed94fbeaf ("net: hns3: add aRFS support for PF") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: fix VF bandwidth does not take effect in some caseYonglong Liu1-1/+1
When enabling 4 TC after setting the bandwidth of VF, the bandwidth of VF will resume to default value, because of the qset resources changed in this case. This patch fixes it by using a fixed VF's qset resources according to HNAE3_MAX_TC macro. Fixes: ee9e44248f52 ("net: hns3: add support for configuring bandwidth of VF on the host") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14net: hns3: add management table after IMP resetYufeng Mo1-0/+7
In the current process, the management table is missing after the IMP reset. This patch adds the management table to the reset process. Fixes: f5aac71c0327 ("net: hns3: add manager table initialization for hardware") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-14perf llvm: Fix script used to obtain kernel make directives to work with new ↵Arnaldo Carvalho de Melo1-0/+1
kbuild Before this patch: # ./perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : FAILED! 39.3: Compile source for BPF prologue generation : Skip 39.4: Compile source for BPF relocation : Skip 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : FAILED! 41.4: BPF relocation checker : Skip # Using 'perf test -v' for these tests shows that it is not finding uapi/linux/fs.h, which ends up being because we don't setup the right header path. Fix it. After this patch: # perf test 39 41 39: LLVM search and compile : 39.1: Basic BPF llvm compile : Ok 39.2: kbuild searching : Ok 39.3: Compile source for BPF prologue generation : Ok 39.4: Compile source for BPF relocation : Ok 41: BPF filter : 41.1: Basic BPF filtering : Ok 41.2: BPF pinning : Ok 41.3: BPF prologue generation : Ok 41.4: BPF relocation checker : Ok # Longer description: In llvm-utils.c we use some techniques to obtain the kbuild make directives and that recently stopped working as now 'ar' gets called and expects to find the dummy.o used to echo these variables: $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS) Add the $(CC) line to satisfy that, making sure this works with all kernels, i.e. preserving the temp directory and files in it used for this technique we can see that it works everywhere: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:42 . drwxrwxrwt. 47 root root 1200 Feb 14 09:42 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # # cat /tmp/tmp.qgaFHgxjZ4/Makefile obj-y := dummy.o $(obj)/%.o: $(src)/%.c @echo -n "$(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(EXTRA_CFLAGS)" $(CC) -c -o $@ $< # Then build with an old kernel Makefile: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I./arch/x86/include -I./arch/x86/include/generated -I./include -I./arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I./include/uapi -I./include/generated/uapi -include ./include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 8 drwx------. 2 root root 100 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:43 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # And a new one: # make -s -C /lib/modules/5.4.18-100.fc30.x86_64/build M=/tmp/tmp.qgaFHgxjZ4/ clean # ls -la /tmp/tmp.qgaFHgxjZ4/ total 4 drwx------. 2 root root 80 Feb 14 09:43 . drwxrwxrwt. 47 root root 1200 Feb 14 09:43 .. -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile # make -s -C /lib/modules/5.6.0-rc1+/build M=/tmp/tmp.qgaFHgxjZ4/ dummy.o -nostdinc -isystem /usr/lib/gcc/x86_64-redhat-linux/9/include -I/home/acme/git/linux/arch/x86/include -I./arch/x86/include/generated -I/home/acme/git/linux/include -I./include -I/home/acme/git/linux/arch/x86/include/uapi -I./arch/x86/include/generated/uapi -I/home/acme/git/linux/include/uapi -I./include/generated/uapi -include /home/acme/git/linux/include/linux/kconfig.h # # ls -la /tmp/tmp.qgaFHgxjZ4/ total 16 drwx------. 2 root root 160 Feb 14 09:44 . drwxrwxrwt. 47 root root 1200 Feb 14 09:44 .. -rw-r--r--. 1 root root 158 Feb 14 09:44 built-in.a -rw-r--r--. 1 root root 149 Feb 14 09:44 .built-in.a.cmd -rw-r--r--. 1 root root 0 Feb 13 17:14 dummy.c -rw-r--r--. 1 root root 936 Feb 14 09:44 dummy.o -rw-r--r--. 1 root root 121 Feb 13 17:14 Makefile -rw-r--r--. 1 root root 0 Feb 14 09:44 modules.order # Reported-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Wang Nan <wangnan0@huawei.com> Cc: Zefan Li <lizefan@huawei.com> Link: https://www.spinics.net/lists/linux-perf-users/msg10600.html Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-02-14Merge branch 'pm-cpufreq'Rafael J. Wysocki2-6/+2
* pm-cpufreq: cpufreq: Make cpufreq_global_kobject static
2020-02-14drm/virtio: fix error checkGerd Hoffmann1-1/+1
The >= compare op must happen in cpu byte order, doing it in little endian fails on big endian machines like s390. Reported-by: Sebastian Mitterle <smitterl@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: http://patchwork.freedesktop.org/patch/msgid/20200214080100.1273-1-kraxel@redhat.com
2020-02-14mac80211: fix wrong 160/80+80 MHz settingShay Bar1-2/+14
Before this patch, STA's would set new width of 160/80+80 MHz based on AP capability only. This is wrong because STA may not support > 80MHz BW. Fix is to verify STA has 160/80+80 MHz capability before increasing its width to > 80MHz. The "support_80_80" and "support_160" setting is based on: "Table 9-272 — Setting of the Supported Channel Width Set subfield and Extended NSS BW Support subfield at a STA transmitting the VHT Capabilities Information field" From "Draft P802.11REVmd_D3.0.pdf" Signed-off-by: Aviad Brikman <aviad.brikman@celeno.com> Signed-off-by: Shay Bar <shay.bar@celeno.com> Link: https://lore.kernel.org/r/20200210130728.23674-1-shay.bar@celeno.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14cfg80211: add missing policy for NL80211_ATTR_STATUS_CODESergey Matyukevich1-0/+1
The nl80211_policy is missing for NL80211_ATTR_STATUS_CODE attribute. As a result, for strictly validated commands, it's assumed to not be supported. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20200213131608.10541-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2020-02-14Merge tag 'drm-intel-next-fixes-2020-02-13' of ↵Dave Airlie26-178/+990
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes drm/i915 fixes for v5.6-rc2 Most of these were aimed at a "next fixes" pull already during the merge window, but there were issues with the baseline I used, which resulted in a lot of issues in CI. I've regenerated this stuff piecemeal now, adding gradually to it, and it seems healthy now. Due to the issues this is much bigger than I'd like. But it was obviously necessary to take the time to ensure it's not garbage... Signed-off-by: Dave Airlie <airlied@redhat.com> From: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/878sl6yfrn.fsf@intel.com
2020-02-14Merge tag 'amd-drm-fixes-5.6-2020-02-12' of ↵Dave Airlie16-66/+108
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.6-2020-02-12: amdgpu: - Additional OD fixes for navi - Misc display fixes - VCN 2.5 DPG fix - Prevent build errors on PowerPC on some configs - GDS EDC fix Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexdeucher@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200212224746.3992-1-alexander.deucher@amd.com
2020-02-14Merge tag 'drm-misc-next-fixes-2020-02-07' of ↵Dave Airlie3-4/+15
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes drm-misc-next fixes for v5.6: - Fix build error in drm/edid. - Plug close-after-free race in vgem_gem_create. - Handle CONFIG_DMA_API_DEBUG_SG better in drm/msm. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/551b6183-a581-9d12-10a9-24cd929de425@linux.intel.com
2020-02-14Merge tag 'drm-misc-fixes-2020-02-07' of ↵Dave Airlie6-3/+18
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Fixes for v5.6: - Revert allow_fb_modifiers in sun4i, as it causes a regression for DE2 and DE3. - Fix null pointer deref in drm_dp_mst_process_up_req(). Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/672810c3-4212-0a46-337b-2cb855573fd2@linux.intel.com
2020-02-14Input: synaptics - remove the LEN0049 dmi id from topbuttonpad listBenjamin Tissoires1-1/+1
The Yoga 11e is using LEN0049, but it doesn't have a trackstick. Thus, there is no need to create a software top buttons row. However, it seems that the device works under SMBus, so keep it as part of the smbus_pnp_ids. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200115013023.9710-1-benjamin.tissoires@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-14Input: synaptics - enable SMBus on ThinkPad L470Gaurav Agrawal1-0/+1
Add touchpad LEN2044 to the list, as it is capable of working with psmouse.synaptics_intertouch=1 Signed-off-by: Gaurav Agrawal <agrawalgaurav@gnome.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/CADdtggVzVJq5gGNmFhKSz2MBwjTpdN5YVOdr4D3Hkkv=KZRc9g@mail.gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-02-14Input: synaptics - switch T470s to RMI4 by defaultLyude Paul1-0/+1
This supports RMI4 and everything seems to work, including the touchpad buttons. So, let's enable this by default. Signed-off-by: Lyude Paul <lyude@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200204194322.112638-1-lyude@redhat.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 01:39:00 +0300