summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-05Merge tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm ↵Olof Johansson7-22/+523
into next/dt Qualcomm ARM Based Device Tree Updates for v4.3 * Switch to use pinctrl compatible for GPIOs * Add RPM regulators for MSM8960 * Add SPI Ethernet support on MSM8960 CDP * Add SMEM support along with dependencies * Add PM8921 support for GPIO and MPP * Fix GSBI cell index * Switch to use real regulators on APQ8064 w/ SDCC * tag 'qcom-dt-for-4.3' of git://codeaurora.org/quic/kernel/agross-msm: ARM: dts: qs600: Add real regulators to sdcc ARM: dts: ifc6410: add real regulators for sdcc nodes. ARM: dts: apq8064: remove temporary fixed regulator for mmc ARM: dts: apq8064: fix missing gsbi cell-index ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin mux ARM: dts: apq8064: add pm8921 mpp support ARM: dts: apq8064: Add pm8921 mfd and its gpio node ARM: dts: msm8974: Add smem reservation and node ARM: dts: msm8974: Add tcsr mutex node ARM: dts: qcom: Add ks8851 node for wired ethernet ARM: dts: qcom: Add MSM8960 CDP RPM regulators ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodes ARM: dts: qcom: Replace gpio node with pinctrl node ARM: dts: qcom: Replace gpio node with pinctrl node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-08-05Merge tag 'at91-dt' of ↵Olof Johansson9-31/+1157
git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into next/dt First batch of DT changes for 4.3: - some fixes on sama5d4 ADC definition - adding Image Sensor Interface (aka ISI) on at91sam9m10g45ek board - update rst controller compatible string on sama5 machines - new sama5d2 DT definition and its reference board: the sama5d2 Xplained. Minimal configuration for now. * tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: ARM: at91/dt: add minimal sama5d2 Xplained board ARM: at91/dt: add basic dtsi for sama5d2 SoC ARM: at91/dt: sama5: update rstc to correct compatible string ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek board ARM: at91/dt: sama5d4: move ADC pinctrl to board device trees ARM: at91/dt: sama5d4: fix external trigger property Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-30ARM: at91/dt: add minimal sama5d2 Xplained boardNicolas Ferre2-0/+135
Add minimal support for the new sama5d2 Xplained board. Only USB, spi/i2c, ethernet and uart/usart peripherals added. With this DTS file you can boot the board and begin to play with it. Rootfs on NFS and sd card have successfully been tested. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2015-07-30ARM: at91/dt: add basic dtsi for sama5d2 SoCLudovic Desroches1-0/+925
Only the basic support for this new Atmel Cortex-A5 SoC. A subset of the peripherals is setup to allow booting. IRQ, clocks, USB, crypto, timers, rtc, ethernet, spi/i2c and uart/usart peripheral nodes are added. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30ARM: at91/dt: sama5: update rstc to correct compatible stringJosh Wu2-2/+2
They'll use "atmel,sama5d3-rstc" for reset function. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [nicolas.ferre@atmel.com: add the old compatible string as a fallback] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-30ARM: at91/dt: add isi & ov2640 dt nodes for at91sam9m10g45ek boardJosh Wu2-19/+76
First we group the isi data pins, and for now we only use 0~7 data pins with HSYNC and VSYNC. Also add the link for atmel-isi and ov2640 sensor node. Signed-off-by: Josh Wu <josh.wu@atmel.com> [nicolas.ferre@atmel.com: move the pinctrl properties in board .dts file] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-28ARM: dts: qs600: Add real regulators to sdccSrinivas Kandagatla1-0/+20
This patch adds real regulators to sdcc nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: ifc6410: add real regulators for sdcc nodes.Srinivas Kandagatla1-0/+27
This patch adds real regulators for all the three sdcc nodes. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: remove temporary fixed regulator for mmcSrinivas Kandagatla1-12/+0
This patch removes temporary fixed regluator use for mmc. Board files should use the regulators which are wiredup appropriately. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28Merge tag 'socfpga_dts_for_v4.3' of ↵Olof Johansson8-11/+163
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v4.3 - Update clocking for DTS nodes - Add DTS board file for Terasic DE0 Atlas board - Use stdout-patch for chosen node - Enable prefetch-data and prefetch-instr * tag 'socfpga_dts_for_v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clk ARM: socfpga: dts: add missing clock gates to socfpga.dtsi ARM: socfpga: dts: Fix gpio dts entry for the correct clock ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clk ARM: dts: socfpga: Add support of Terasic DE0 Atlas board ARM: dts: socfpga: use stdout-path for chosen node ARM: dts: socfpga: enable the data and instruction prefetch for the l2 cache Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28Merge tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek into next/dtOlof Johansson9-9/+411
- ARM: dts: mediatek: add mt6580 basic support - Document: DT: Add bindings for mediatek MT6580 SoC Platform - ARM: dts: mediatek mt8135: Use real UART clocks - ARM: dts: mt8135-evbp1: Add PMIC support - ARM: dts: mt8135: Add pmic wrapper nodes - ARM: dts: mediatek: Enable clock support for Mediatek MT8135. * tag 'v4.2-next-dts' of https://github.com/mbgg/linux-mediatek: ARM: dts: mediatek: add mt6580 basic support Document: DT: Add bindings for mediatek MT6580 SoC Platform ARM: dts: mediatek mt8135: Use real UART clocks ARM: dts: mt8135-evbp1: Add PMIC support ARM: dts: mt8135: Add pmic wrapper nodes ARM: dts: mediatek: Enable clock support for Mediatek MT8135. Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-28ARM: at91/dt: sama5d4: move ADC pinctrl to board device treesAlexandre Belloni3-9/+18
The ADC pinctrl is board specific, move it to the board device trees. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-28ARM: at91/dt: sama5d4: fix external trigger propertyAlexandre Belloni1-1/+1
The property is actually atmel,adc-use-external-triggers. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2015-07-28ARM: dts: apq8064: fix missing gsbi cell-indexSrinivas Kandagatla1-0/+1
Without this i2c instance for missing cell-index nodes would fail, fix it by adding correct cell-index. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: Add DT support for GSBI6 and for UART pin muxPramod Gurav2-1/+42
This change adds DT support for GSBI6 and muxes the gpio pins as UART lines. Also defines a alias for serial port on these lines. Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com> [Srinivas Kandagatla]: fix pinctrl location and rename alias correctly Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: add pm8921 mpp supportSrinivas Kandagatla1-0/+12
This patch adds pmic pm8921 mpp gpio controller node. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-28ARM: dts: apq8064: Add pm8921 mfd and its gpio nodeSrinivas Kandagatla1-1/+35
This patch adds pmic gpio node to the device tree, this node is necessary for devices like wlan to control reset gpio. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-27ARM: dts: UniPhier: add UART and USB pinmux nodesMasahiro Yamada4-0/+131
The DT nodes in uniphier-pinctrl.dtsi provide the default pinctrl settings that would be suitable for most boards. You can still override them in your board DTS file if necessary. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27ARM: dts: UniPhier: add pinctrl device nodesMasahiro Yamada3-0/+18
Add the pinctrol device nodes for UniPhier PH1-LD4, PH1-Pro4, and PH1-sLD8. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27Merge tag 'omap-for-v4.3/dt-dm814x' of ↵Olof Johansson6-0/+529
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt omap dts changes for minimal dm814x support for v4.3 merge window. These changes make dm814x boot and adds minimal board support for dm814x-evm and hp t410. Note that to boot these depend on omap-for-v4.3/soc-signed branch, but as dm814x support is currently broken, these can be merged separately with the other dts changes. * tag 'omap-for-v4.3/dt-dm814x' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: Add custom abort handler for t410 ARM: dts: Add minimal support for HP T410 ARM: dts: Add minimal dts support for dm8148-evm ARM: dts: Add minimal clocks for dm814x ARM: dts: Add minimal dm814x support Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27Merge tag 'renesas-dt2-for-v4.3' of ↵Olof Johansson8-3/+109
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Second Round of Renesas ARM Based SoC DT Updates for v4.3 * Add Audio MIX and CTU support to r8a779[01] SoCs * Correct IRQ sense for adv7511 on lager board * Add sound label to koelsch and lager boards * Add IIC support to emev2 SoC * tag 'renesas-dt2-for-v4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: r8a7791: Add Audio MIX support on DTSI ARM: shmobile: r8a7791: Add Audio CTU support on DTSI ARM: shmobile: r8a7790: Add Audio MIX support on DTSI ARM: shmobile: r8a7790: Add Audio CTU support on DTSI ARM: shmobile: lager: Fix adv7511 IRQ sensing ARM: shmobile: koelsch: add sound label on DTS ARM: shmobile: lager: add sound label on DTS ARM: shmobile: emev2: kzm9d: enable IIC busses ARM: shmobile: emev2: add IIC cores to dtsi Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27Merge tag 'stm32-dt-for-v4.3-1b' of ↵Olof Johansson4-58/+108
https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32 into next/dt STM32 DT updates for v4.3, round 1. Highlights: ----------- - Add RCC clocks support to STM32F429 - Add STM32429i-EVAL board support - Use stdout-path instead of linux,stdout-path in Disco board * tag 'stm32-dt-for-v4.3-1b' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/stm32: ARM: dts: Use stdout-path in STM32F429 Discovery board ARM: dts: Add STM32429i-EVAL board support ARM: dts: stm32f429: Adopt STM32F4 clock driver Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-27Merge tag 'sti-dt-for-v4.3-1' of ↵Olof Johansson9-36/+269
https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti into next/dt STi DT update for v4.3, round 1. Highlights: ----------- - Add pinctrl configurations for transport stream channels - Add cpu-release-addr properties to STiH407 and STiH418 - Add PWM regulator support so STIH407 family - Add BDISP node to STiH407 * tag 'sti-dt-for-v4.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mcoquelin/sti: ARM: DT: STiH410: Add bdisp dt nodes ARM: STi: STiH407: Add PWM Regulator node ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-family ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_x ARM: STi: DT: STiH418: Add cpu-release-addr dt property. ARM: STi: DT: STiH407: Add cpu-release-addr dt property. ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configuration ARM: STi: DT: Add STiH407 family tsout1 pinctrl configuration ARM: STi: DT: Add STiH407 family tsout0 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin5 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin4 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin3 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin2 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin1 pinctrl configuration ARM: STi: DT: Add STiH407 family tsin0 pinctrl configuration Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-25ARM: socfpga: dts: add osc1 as a possible parent for dbg_base_clkDinh Nguyen1-1/+1
The dbg_base_clk can also have osc1 has a parent. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-07-24ARM: OMAP2+: Add custom abort handler for t410Tony Lindgren1-0/+29
Similar to commit fdf4850cb5b2 ("ARM: BCM5301X: workaround suppress fault"), let's add custom handling for the aborts on t410 that prevent booting: Unhandled fault: imprecise external abort (0xc06) at 0xee091fb0 pgd = ee4bc000 [ee091fb0] *pgd=ae00041e(bad) Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24ARM: dts: Add minimal support for HP T410Tony Lindgren2-0/+29
Add minimal support for HP T410. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24ARM: dts: Add minimal dts support for dm8148-evmTony Lindgren2-0/+29
Add minimal dts support for dm8148-evm. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24ARM: dts: Add minimal clocks for dm814xTony Lindgren2-0/+111
Use fixed clocks until we have a clock driver for the PLL. The mux and divider composite clocks work the same way as on dm816x and am335x. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24ARM: dts: Add minimal dm814x supportTony Lindgren1-0/+331
Add minimal dm814x support. Cc: Matthijs van Duin <matthijsvanduin@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-24ARM: dts: msm8974: Add smem reservation and nodeBjorn Andersson1-0/+20
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: msm8974: Add tcsr mutex nodeBjorn Andersson1-0/+12
Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: qcom: Add ks8851 node for wired ethernetStephen Boyd2-0/+91
The micrel ks8851 device is present on MSM8960 CDP boards. It is connected to two regulators, one controlled via a gpio and another controlled via the RPM. Add the gsbi, spi, gpio regulator, and micrel ks8851 nodes so that ethernet works properly. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: qcom: Add MSM8960 CDP RPM regulatorsStephen Boyd1-0/+236
Add RPM regulators and configure their constraints on the MSM8960 CDP so that we can control these supplies. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: qcom: Add MSM8960 RPM and RPM regulator nodesStephen Boyd1-0/+19
Add the basic RPM and RPM regulator nodes that boards can fill in with their board specific details. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: qcom: Replace gpio node with pinctrl nodeStephen Boyd1-3/+2
Now that we have a proper pinctrl driver for the gpio block we can change the compatible field here and configure the pinmux on msm8960 devices. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-24ARM: dts: qcom: Replace gpio node with pinctrl nodeBjorn Andersson1-5/+6
Replace the standalone gpio driver with pinctrl-msm as we now have msm8660 support there. Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Andy Gross <agross@codeaurora.org>
2015-07-23ARM: dts: Use stdout-path in STM32F429 Discovery boardMaxime Coquelin1-2/+2
This patch replaces use of linux,stdout-path by stdout-path as per "chosen" DT bindings documentation. Doing that, the "console" argument is no more needed in kernel command line. Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2015-07-23ARM: dts: Add STM32429i-EVAL board supportMaxime Coquelin2-1/+78
Main features of STM32429i-EVAL evaluation kit are: - STM32F429 Cortex-M4 MCU @180MHz * 2MB internal Flash * 256KB internal RAM - 32MB SDRAM - 16MB NOR Flash - 2MB SRAM - 4.3" TFT LCD with resistive touchscreen - SDCard connector (SDIO compatible) - 1x USB 2.0 OTG + 1x USB 1.1 OTG - Ethernet Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
2015-07-23Merge tag 'omap-for-v4.3/dt-pt2' of ↵Olof Johansson13-14/+729
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v4.3, part2" from Tony Lindgren: More omap dts changes for v4.3 merge window: - Add missing devices for pandora. Note that we're adding wl1251 WLAN and LCD backlight support for now using legacy pdata as that allows us to drop the legacy board file for pandora in another series of patches - Enable power button support for omap5-uevm - Add aliases for am437x UARTs - Add support for phyCORE phyBOARD-WEGA-AM335x rdk and phyCORE-AM335x SoM - Use u16 values for tsc2046 on omap3-lilly * tag 'omap-for-v4.3/dt-pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP2+: omap3-pandora: add wifi support ARM: OMAP2+: omap3-pandora: add backlight support ARM: dts: omap3-pandora: add support for usb host and 32k buffer ARM: dts: omap3-pandora: miscellaneous corrections ARM: dts: omap5-uevm: Add Palmas power button support ARM: dts: am437x: add aliases for all UART instances ARM: dts: Add phyBOARD-WEGA-AM335x rdk ARM: dts: Add support for phyCORE-AM335x SoM ARM: dts: omap3: correct the format of u16 values for tsc2046 node Signed-off-by: Olof Johansson <olof@lixom.net>
2015-07-22ARM: socfpga: dts: add missing clock gates to socfpga.dtsiMatthew Gerlach1-1/+30
The gates for the clocks coming out of the sdram pll were missing. The change adds the missing nodes to the device tree. Signed-off-by: Matthew Gerlach <mgerlach@opensource.altera.com> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-07-22ARM: socfpga: dts: Fix gpio dts entry for the correct clockDinh Nguyen1-3/+3
The correct clock for the HPS gpio(s) should be the l4_mp_clk. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-07-22ARM: socfpga: dts: Correct the parent clock for l3_sp_clk and dbg_clkDinh Nguyen1-2/+2
The l3_sp_clk's parent should be the l3_mp_clk. This will account for the extra divider that is present for the l3_mp_clk. The dbg_clk's parent should be the dbg_at_clk. This will account for the extra divider that is present for the dbg_at_clk. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
2015-07-22ARM: DT: STiH410: Add bdisp dt nodesFabien Dessenne1-0/+12
Add the bdisp (2D blitter for STMicroelectronics SoC) dt nodes for the first of the two bdisp devices, defining register address, interrupt and clock. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: STiH407: Add PWM Regulator nodeLee Jones1-0/+11
Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: STiH407: Move PWM nodes STiH407 => STiH407-familyLee Jones2-28/+30
This also incorporates the STiH410. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: DT: Rename st_pll3200c32_407_c0_x into st_pll3200c32_cx_xGabriel Fernandez4-8/+8
Use a generic name for this kind of PLL Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: DT: STiH418: Add cpu-release-addr dt property.Peter Griffin1-0/+4
To enable SMP when booting via u-boot we need to specify the newly implemented cpu-release-addr DT property for cores 2 & 3. Cores 0 & 1 are inherited from stih407-family.dtsi. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: DT: STiH407: Add cpu-release-addr dt property.Peter Griffin1-0/+4
To enable SMP when booting via u-boot we need to specify the newly implemented cpu-release-addr DT property. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: DT: Add STiH407 family mtsin0 pinctrl configurationPeter Griffin1-0/+19
mtsin0 channel can only be configured for parallel data transfer. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
2015-07-22ARM: STi: DT: Add STiH407 family tsout1 pinctrl configurationPeter Griffin1-0/+12
tsout1 channel can only be configured for serial data tranfer. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 13:15:31 +0300