summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-12-19drm/amd/display: Specified VR patch skip to reset segment to 0Derek Lai1-0/+1
[Why] After read the 3rd Edid blocks, we will reset segment to 0, which causes this VR fail to read Edid successfully. [How] Skip to reset segment to 0 for this VR device. Signed-off-by: Derek Lai <Derek.Lai@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: check link status before disable streamPaul Hsieh2-4/+18
[Why] 1. Set second screen only then unplug external monitor 2. Enter to S4 then plug in external monitor 3. Resume from S4, eDP will not turn off when OS set second screen only Sometimes OS will not set eDP power up cause eDP dpms_off keep true then driver skipp disable stream [How] When drvier try to disable stream, add link status condition Signed-off-by: Paul Hsieh <paul.hsieh@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: disable lttpr for NaviHugo Hu1-1/+1
Signed-off-by: Hugo Hu <hugo.hu@amd.com> Reviewed-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Perform DMUB hw_init on resumeNicholas Kazlauskas2-75/+128
[Why] The DMUB is put into reset on suspend and is not running on resume, disabling PSR/ABM features. [How] Move the allocation of the framebuffer to sw_init. Do DMUB hardware init and framebuffer filling only from hw_init. On resume the contents of the framebuffer will be invalid so those should be cleared. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Map ODM memory correctly when doing ODM combineNikola Cornij1-4/+12
[why] Up to 4 ODM memory pieces are required per ODM combine and cannot overlap, i.e. each ODM "session" has to use its own memory pieces. The ODM-memory mapping is currently broken for generic case. The maximum number of memory pieces is ASIC-dependent, but it's always big enough to satisfy maximum number of ODM combines. Memory pieces are mapped as a bit-map, i.e. one memory piece corresponds to one bit. The OPTC doing ODM needs to select memory pieces by setting the corresponding bits, making sure there's no overlap with other OPTC instances that might be doing ODM. The current mapping works only for OPTC instance indexes smaller than 3. For instance indexes 3 and up it practically maps no ODM memory, causing black, gray or white screen in display configs that include ODM on OPTC instance 3 or up. [how] Statically map two unique ODM memory pieces for each OPTC instance and piece them together when programming ODM combine mode. Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Add warmup escape call supportCharlene Liu7-30/+56
Add warmup escape support, for diags, in a way that is possible to choose a new or an existing sequence. For achieving this goal, this commit adds separated MCIF buffer as VCN request. Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: fix regamma build optimizationJosip Pavic1-2/+4
[Why] When the global variable pow_buffer_ptr is set to -1, by definition optimizations should not be used to build the regamma. Since translate_from_linear_space unconditionally increments this global, it inadvertently enables the optimization. [How] Increment pow_buffer_ptr only if it is not -1. Signed-off-by: Josip Pavic <Josip.Pavic@amd.com> Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: scaling changes should also be a full updateAric Cyr1-4/+4
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: 3.2.63Aric Cyr1-1/+1
Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Remove integer scaling code from DC and fix cursorAric Cyr2-45/+2
[Why] Scaling better handled by upper layers before pipe splitting. [How] Remove DC code for integer scaling and force cursor update if viewport or scaling changes occur to prevent underflow from invalid cursor position. Signed-off-by: Aric Cyr <aric.cyr@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Enable Seamless Boot Transition for Multiple StreamsMartin Leung5-11/+66
[why] dc previously had bugs that interfered with the ability to inherit a timing from a device with multiple streams (without flash/blanking). After this fix there is still a dependency on UEFI support. [how] fixed 3 bugs: loaded MPC state, changed bw_optimize flag to a counter instead of a boolean, and reading dpp/disp clk from HW to ensure we don't raise the clock's when we're not supposed to. Signed-off-by: Martin Leung <martin.leung@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Default max bpc to 16 for eDPRoman Li1-3/+3
[Why] Some 10bit eDP panels don't lightup after we cap bpc to 8. [How] Set default max_bpc to 16 for edp connector type. Signed-off-by: Roman Li <roman.li@amd.com> Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Collapse resource arrays when pipe is disabledNoah Abradjian1-10/+10
[Why] Currently, pipe resources are assigned to an index that matches the pipe position. However, if pipe 1 or 2 is disabled, there will be a gap in the arrays which causes a crash when iterating based on pipe_count. [How] Fix resource construct to assign resources to minimum available array index. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Yongqiang Sun <yongqiang.sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: update chroma viewport waEric Yang7-41/+305
[Why] Need previously implemented chroma vp wa to work for rotation cases. [How] Implement rotation specific wa. Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Use pipe_count for num of oppsNoah Abradjian1-1/+1
[Why] There is one opp per pipe. For certain RN parts, the fourth pipe is disabled, so there is no opp for it. res_cap->num_opp is hardcoded to 4, so if we use that to iterate over opps we will crash. [How] Use the pipe_count value instead, which is not hardcoded and so will have the correct number. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Reinstate LFC optimizationAmanda Liu2-13/+20
[why] We want to streamline the calculations made when entering LFC. Previously, the optimizations led to screen tearing and were backed out to unblock development. [how] Integrate other calculations parameters, as well as screen tearing, fixes with the original LFC calculation optimizations. Signed-off-by: Amanda Liu <amanda.liu@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: AVI info package change due to spec updateQingqing Zhuo1-1/+1
YQ should be limited range for all cases. Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Add definition for number of backlight data pointsCamille Cho1-1/+2
[Why] A hardcoded number is used today [How] Add definition for number of BL data points Signed-off-by: Camille Cho <Camille.Cho@amd.com> Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Add interface to adjust DSC max target bpp limitJoshua Aberback2-3/+13
[Why] For some use cases we need to be able to adjust the maximum target bpp allowed by DSC policy. [How] New interface dc_dsc_policy_set_max_target_bpp_limit Signed-off-by: Joshua Aberback <joshua.aberback@amd.com> Reviewed-by: Nikola Cornij <Nikola.Cornij@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Disable integerscaling for downscale and MPOAidan Yang1-1/+17
[Why] Integer scaling is applied to MPO planes when downscaling, MPO planes use variable taps and integer scaling sets taps=1 [How] Disable integer scaling on MPO planes, Disable integer scaling for downscaling planes Signed-off-by: Aidan Yang <Aidan.Yang@amd.com> Reviewed-by: Aric Cyr <Aric.Cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Use physical addressing for DMCUB on both dcn20/21Nicholas Kazlauskas4-125/+44
[Why] CW0 and CW1 need to use physical addressing mode for dcn20 and dcn21. The current code for dcn20 is using virtual. [How] We already program the DMCUB like this on dcn21 so we should just use the same sequence for both. Copy the dcn21 sequences into the dmjub_dcn20.c file and rename them. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Get DMUB registers from ASIC specific structsNicholas Kazlauskas7-6/+176
[Why] These values can differ per ASIC and should follow the full DC style register programming model. [How] Define a common list and fill in the common list separately for dcn20 and dcn21. Unlike DC we're not using designated initializers for better compiler compatibility since this resides in the DMUB service. Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: Add wait for flip not pending on pipe unlockNoah Abradjian1-3/+36
[Why] Lack of proper timing caused intermittent underflow on unplug external DP. A previous fix was invalid and caused S0i3 regression, so had to be reverted. [How] When unlocking pipe, wait for no pipes to have flip pending before unlocking. Signed-off-by: Noah Abradjian <noah.abradjian@amd.com> Reviewed-by: Tony Cheng <Tony.Cheng@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: disable lttpr for RNabdoulaye berthe1-1/+1
Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com> Reviewed-by: George Shen <George.Shen@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: HDMI 2.x audio bandwidth checkCharlene Liu5-2/+57
Add HDMI 2.x audio bandwidth check Signed-off-by: Charlene Liu <charlene.liu@amd.com> Reviewed-by: Chris Park <Chris.Park@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu/vcn: remove JPEG related code from idle handler and begin useLeo Liu1-23/+5
For VCN2.0 and above, VCN has been separated from JPEG Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu/vcn1.0: use its own idle handler and begin use funcsLeo Liu5-6/+95
Because VCN1.0 power management and DPG mode are managed together with JPEG1.0 under both HW and FW, so separated them from general VCN code. Also the multiple instances case got removed, since VCN1.0 HW just have a single instance. v2: override work func with vcn1.0's own Signed-off-by: Leo Liu <leo.liu@amd.com> Reviewed-by: James Zhu <James.Zhu@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu: enable gfxoff for raven1 refreshchangzhu1-11/+4
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by: changzhu <Changfeng.Zhu@amd.com> Reviewed-by: Huang Rui <ray.huang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu/sriov: Tonga sriov also need load firmware with smuEmily Deng2-4/+2
Fix Tonga sriov load driver fail issue. Signed-off-by: Emily Deng <Emily.Deng@amd.com> Reviewd-by Yintian Tao <Yintian.tao@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu: drop useless BACO arg in amdgpu_ras_reset_gpuGuchun Chen6-8/+7
BACO reset mode strategy is determined by latter func when calling amdgpu_ras_reset_gpu. So not to confuse audience, drop it. Signed-off-by: Guchun Chen <guchun.chen@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/display: add missing dcn link encoder regsRoman Li5-6/+253
[Why] The earlier change: "check phy dpalt lane count config" uses link encoder registers not defined properly. That caused regression with mst-enabled display not lighting up. [How] Add missing reg definitions. Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu: add dpcs20 registersRoman Li2-0/+4559
add reg headers to dpcs includes Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu: move dpcs headers to dpcs includesRoman Li2-0/+0
- create dpcs directory for dpcs asic_reg headers - move dpcs21 reg headers from dcn to dpcs directory Signed-off-by: Roman Li <Roman.Li@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdgpu: Add CU info print logYong Zhao1-0/+6
The log will be useful for easily getting the CU info on various emulation models or ASICs. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdkfd: Use Arcturus specific set_vm_context_page_table_base()Yong Zhao3-14/+22
Since Arcturus has it own function pointer, we can move Arcturus specific logic to there rather than leaving it entangled with other GFX9 chips. Signed-off-by: Yong Zhao <Yong.Zhao@amd.com> Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amd/powerplay: fix various dereferences of a pointer before it is null ↵Colin Ian King2-15/+6
checked There are several occurrances of the pointer hwmgr being dereferenced before it is null checked. Fix these by performing the dereference of hwmgr after it has been null checked. Addresses-Coverity: ("Dereference before null check") Fixes: c9ffa427db34e6 ("drm/amd/powerplay: enable pp one vf mode for vega10") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19drm/amdkfd: queue kfd interrupt work to different CPUPhilip Yang1-1/+16
Because queue_work schedule the work on the same CPU the interrupt handler is running, if there are many interrupts pending, it takes longer time for work queue to start, or even worse system will hang. v2: queue work to same NUMA node for better cache locality v3: handle cpumask_next wraparound case Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Eric Huang <JinhuiEric.Huang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19amdgpu: Wrap FPU dependent functions in dc20Timothy Pearson1-4/+16
dc20 containes several FPU-dependent functions without proper FPU kernel mode enable/disable wrappers. Add the required wrappers for both x86 and POWER. This enables Navi DC20 support for POWER systems. v2: fix compilation Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19amdgpu: Enable initial DCN support on POWERTimothy Pearson8-1/+73
DCN requires floating point support to operate. Add the appropriate x86/ppc64 guards and FPU / AltiVec / VSX context switches to DCN. Note that the current DC20 code doesn't contain all required FPU wrappers on x86 or POWER, so this patch is insufficient to fully enable DC20 on POWER. v2: s/X86_64/X86/g to retain previous behavior. Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-19amdgpu: Prepare DCN floating point macros for generic arch supportTimothy Pearson4-16/+22
Introduce DC_FP_START()/DC_FP_END() macros to help enable floating point kernel mode support across various architectures. v2: move copyright update to commit which adds the changes Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-12-18drm/i915: Ratelimit i915_globals_parkChris Wilson1-9/+44
When doing our global park, we like to be a good citizen and shrink our slab caches (of which we have quite a few now), but each kmem_cache_shrink() incurs a stop_machine() and so ends up being quite expensive, causing machine-wide stalls. While ideally we would like to throw away unused pages in our slab caches whenever it appears that we are idling, doing so will require a much cheaper mechanism. In the meantime use a delayed worked to impose a rate-limit that means we have to have been idle for more than 2 seconds before we start shrinking. References: https://gitlab.freedesktop.org/drm/intel/issues/848 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218094057.3510459-1-chris@chris-wilson.co.uk
2019-12-18drm/i915/gt: Remove direct invocation of breadcrumb signalingChris Wilson10-38/+27
Only signal the breadcrumbs from inside the irq_work, simplifying our interface and calling conventions. The micro-optimisation here is that by always using the irq_work interface, we know we are always inside an irq-off critical section for the breadcrumb signaling and can ellide save/restore of the irq flags. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191217095642.3124521-7-chris@chris-wilson.co.uk
2019-12-18drm/i915/pmu: Ensure monotonic rc6Tvrtko Ursulin2-54/+21
Avoid rc6 counter going backward in close to 0% RC6 scenarios like: 15.005477996 114,246,613 ns i915/rc6-residency/ 16.005876662 667,657 ns i915/rc6-residency/ 17.006131417 7,286 ns i915/rc6-residency/ 18.006615031 18,446,744,073,708,914,688 ns i915/rc6-residency/ 19.007158361 18,446,744,073,709,447,168 ns i915/rc6-residency/ 20.007806498 0 ns i915/rc6-residency/ 21.008227495 1,440,403 ns i915/rc6-residency/ There are two aspects to this fix. First is not assuming rc6 value zero means GT is asleep since that can also mean GPU is fully busy and we do not want to enter the estimation path in that case. Second is ensuring monotonicity on the estimation path itself. I suspect what is happening is with extremely rapid park/unpark cycles we get no updates on the real rc6 and therefore have to careful not to unconditionally trust use last known real rc6 when creating a new estimation. v2: * Simplify logic by not tracking the estimate but last reported value. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Fixes: 16ffe73c186b ("drm/i915/pmu: Use GT parked for estimating RC6 while asleep") Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> # v1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20191217142057.1000-1-tvrtko.ursulin@linux.intel.com
2019-12-18Merge tag 'du-next-20191218' of git://linuxtv.org/pinchartl/media into drm-nextDaniel Vetter17-155/+856
R-Car Display Unit changes: - Color Management Module support - LVDS encoder dual-link support enhancements - R8A77980 support Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191218151710.GA13830@pendragon.ideasonboard.com
2019-12-18drm/i915: Move stuff from haswell_crtc_disable() into encoder .post_disable()Ville Syrjälä7-51/+86
Move all of haswell_crtc_disable() into the encoder .post_disable() hooks. Now we're left with just calling the .disable() and .post_disable() hooks back to back. I chose to move the code into the .post_disable() hook instead of the .disable() hook as most of the sequence is currently implemented in the .post_disable() hook. We should collapse it all down to just one hook and then the encoders can drive the modeset sequence fully. But that may need some further refactoring as we currently call the ddi .post_disable() hook from mst code and we can't just replace that with a call to the ddi .disable() hook. Should also follow up with similar treatment for the enable sequence but let's start here where it's easier. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-5-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-12-18drm/i915: Pass old crtc state to intel_crtc_vblank_off()Ville Syrjälä1-4/+6
To make life easier in the future let's pass the old crtc state to intel_crtc_vblank_off() just like we already do for its counterpart intel_crtc_vblank_on(). Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-4-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-12-18drm/i915: Pass old crtc state to skylake_scaler_disable()Ville Syrjälä1-2/+3
To make life easier in the future let's pass the old crtc state to skylake_scaler_disable() just like we already do for for its ancestor ironlake_pfit_disable(). Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-3-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-12-18drm/i915: Nuke .post_pll_disable() for DDI platformsVille Syrjälä3-36/+10
HSW+ platforms call encoder .post_disable() and .post_pll_disable() back to back. And since we don't even disable the PLL in between let's just move everything into .post_disable(). intel_dp_mst does forward the .post_disable() call to intel_ddi at the very end of its own .post_disable() hook, so this time MST I shouldn't even break MST by accident. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-12-18drm/i915: Call hsw_fdi_link_train() directly()Ville Syrjälä4-12/+6
Remove the pointless vfunc detour for hsw_fdi_link_train() and just call it directly. Also pass the encoder in so we can nuke the silly encoder loop within. Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191213195217.15168-1-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2019-12-18drm/i915: Introduce intel_plane_state_reset()Ville Syrjälä1-2/+13
For the sake of symmetry with the crtc stuff let's add a helper to reset the plane state to sane default values. For the moment this only gets caller from the plane init. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20191107142417.11107-5-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 14:18:43 +0300