| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The custom rate constraint list was necessary to support 128kHz.
This rate is now available through SNDRV_PCM_RATE_128000.
Use it and drop the custom rate constraint rule.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-2-8371948d3921@baylibre.com
|
|
This adds a sample rate definition for 12kHz, 24kHz and 128kHz.
Admittedly, just a few drivers are currently using these sample
rates but there is enough of a recurrence to justify adding a definition
for them and remove some custom rate constraint code while at it.
The new definitions are not added to the interval definitions, such as
SNDRV_PCM_RATE_8000_44100, because it would silently add new supported
rates to drivers that may or may not support them. For sure the drivers
have not been tested for these new rates so it is better to leave them out
of interval definitions.
That being said, the added rates are multiples of well know rates families,
it is very likely that a lot of devices out there actually supports them.
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: David Rhodes <drhodes@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240905-alsa-12-24-128-v1-1-8371948d3921@baylibre.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.11
A larger set of fixes than I'd like at this point, but mainly due to
people working on fixing module autoloading by adding missing exports of
ID tables rather than anything particularly concerning. There are some
other runtime fixes and quirks, and a tweak to the ABI definition for
SOF which ensures that a struct layout doesn't vary depending on the
architecture of the host.
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240905022017.1642550-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240905032148.1929393-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from amergnat@baylibre.com:
This serie aim to add the following audio support for the Genio 350-evk:
- Playback
- 2ch Headset Jack (Earphone)
- 1ch Line-out Jack (Speaker)
- 8ch HDMI Tx
- Capture
- 1ch DMIC (On-board Digital Microphone)
- 1ch AMIC (On-board Analogic Microphone)
- 1ch Headset Jack (External Analogic Microphone)
Of course, HDMI playback need the MT8365 display patches [1] and a DTS
change documented in "mediatek,mt8365-mt6357.yaml".
|
|
When the headset is connected, there is no automatic switching of the
capture source - you can only manually select the headset microphone
in pavucontrol.
This patch fixes/activates the inactive microphone of the headset.
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240905140211.937385-1-kovalev@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The period size represents the size of the DMA descriptor. To ensure all
DMA descriptors start from a well-aligned address, the period size must
be divided by (sample size * maxburst), not just by maxburst.
This adjustment allows for computing a higher maxburst value, thereby
increasing the performance of the DMA transfer.
Previously, snd_pcm_lib_period_bytes() returned 0 because the runtime HW
parameters are computed after the hw_params() callbacks are used.
To address this, we now use params_*() functions to compute the period
size accurately. This change optimizes the DMA transfer performance by
ensuring proper alignment and efficient use of maxburst values.
[andrei.simion@microchip.com: Reword commit message and commit title.
Add macros with values for maximum DMA chunk size allowed.
Add DMA_BURST_ALIGNED preprocessor function to check the alignment of the
DMA burst]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240905095633.113784-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
- Add specific config to enable:
- MT8365 sound support
- MT6357 audio codec support
- Add the mt8365 directory and all drivers under it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v8-2-e80a57d026ce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the support of MT6357 PMIC audio codec.
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v8-1-e80a57d026ce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Zhang Zekun <zhangzekun11@huawei.com>:
There are some helper functions which can be used to simplify the code.
So, let's use these functions to make code more simple.
|
|
of_get_child_count() can help to get the num of child directly and we
don't need to manually count the child num. No functional change with
this conversion.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240827070650.11424-3-zhangzekun11@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for_each_child_of_node_scoped() can put the device_node automatically.
So, using it to make the code logic more simple and remove the device_node
clean up code.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/20240827070650.11424-2-zhangzekun11@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
mt2701_cs42448_machine_probe
Utilize the defined parameter 'dev' to make the code cleaner.
Signed-off-by: Liu Jing <liujing@cmss.chinamobile.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240903093623.7120-1-liujing@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The mute LED on this HP laptop uses ALC236 and requires a quirk to function. This patch enables the existing quirk for the device.
Signed-off-by: Maximilien Perreault <maximilienperreault@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240904031013.21220-1-maximilienperreault@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mute led is controlled by ALC245. This patch enables the already
existing quirk for this device.
Signed-off-by: Adam Queler <queler+k@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903202419.31433-1-queler+k@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from Venkata Prasad Potturu <venkataprasad.potturu@amd.com>:
1. Refactor acp generic driver to support all platforms.
2. Add i2s/tdm and support for acp7.0 and acp7.1 platforms.
|
|
Merge series from Heiko Stuebner <heiko@sntech.de>:
The Nanopc-T6 board does contain some devicetree errors, that came to
light with recent changes to the board.
|
|
Merge series from Alexandre Mergnat <amergnat@baylibre.com>:
This serie aim to add the following audio support for the Genio 350-evk:
- Playback
- 2ch Headset Jack (Earphone)
- 1ch Line-out Jack (Speaker)
- 8ch HDMI Tx
- Capture
- 1ch DMIC (On-board Digital Microphone)
- 1ch AMIC (On-board Analogic Microphone)
- 1ch Headset Jack (External Analogic Microphone)
Of course, HDMI playback need the MT8365 display patches [1] and a DTS
change documented in "mediatek,mt8365-mt6357.yaml".
Applied patch:
- mfd: mt6397-core: register mt6357 sound codec
Test passed:
- mixer-test log: [3]
- pcm-test log: [4]
[1]: https://lore.kernel.org/all/20231023-display-support-v1-0-5c860ed5c33b@baylibre.com/
[2]: https://lore.kernel.org/all/20240313110147.1267793-1-angelogioacchino.delregno@collabora.com/
[3]: https://pastebin.com/pc43AVrT
[4]: https://pastebin.com/cCtGhDpg
[5]: https://gitlab.baylibre.com/baylibre/mediatek/bsp/linux/-/commits/sound/for-next/add-i350-audio-support
|
|
In function loongson_card_parse_of(), when get device_node
'codec' failed, the function of_node_put(codec) should not
be invoked, thus fix error release.
Fixes: d24028606e76 ("ASoC: loongson: Add Loongson ASoC Sound Card Support")
Signed-off-by: tangbin <tangbin@cmss.chinamobile.com>
Link: https://patch.msgid.link/20240903090620.6276-1-tangbin@cmss.chinamobile.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support multiple endpoints on TLV320AIC32x4 codec port when
used in of_graph context.
This patch allows to share the codec port between two CPU DAIs.
Example:
Custom STM32MP157C board uses TLV320AIC32x4 audio codec. This codec
is connected to two serial audio interfaces, which are configured
either as rx or tx.
>From AsoC point of view the topolgy is the following:
// 2 CPU DAIs (SAI2A/B), 1 Codec (TLV320AIC32x4)
Playback: CPU-A-DAI(slave) -> (master)CODEC-DAI/port0
Record: CPU-B-DAI(slave) <- (master)CODEC-DAI/port0
In the DT two endpoints have to be associated to the codec port:
tlv320aic32x4_port: port {
tlv320aic32x4_tx_endpoint: endpoint@0 {
remote-endpoint = <&sai2a_endpoint>;
};
tlv320aic32x4_rx_endpoint: endpoint@1 {
remote-endpoint = <&sai2b_endpoint>;
};
};
However, when the audio graph card parses the codec nodes, it expects
to find DAI interface indexes matching the endpoints indexes.
The current patch forces the use of DAI id 0 for both endpoints,
which allows to share the codec DAI between the two CPU DAIs
for playback and capture streams respectively.
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240830231007.205707-1-marex@denx.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Return devm_of_clk_add_hw_provider() in order to transfer the error, if it
fails due to resource allocation failure or device tree clock provider
registration failure.
Cc: stable@vger.kernel.org
Fixes: ebbfabc16d23 ("ASoC: rt5682: Add CCF usage for providing I2S clks")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20240830143154.3448004-1-make24@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a driver for the Audio Front End (AFE) PCM to provide Audio
Uplink (UL) and Downlink (DL) paths.
Use the ALSA SoC Dynamic Audio Power Management to add widget and
kcontrol supports.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-11-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add a specific soundcard for mt8365-evk. It supports audio jack
in/out, dmics, the amic and lineout.
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-10-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Pulse Code Modulation Device Audio Interface support for MT8365 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-9-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add Digital Micro Device Audio Interface support for MT8365 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-8-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add ADDA Device Audio Interface support for MT8365 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-7-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add I2S Device Audio Interface support for MT8365 SoC.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-6-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add audio clock wrapper and audio tuner control.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-5-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add header files for register definition and structure.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-4-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add the audio codec sub-device. This sub-device is used to set the
optional voltage values according to the hardware.
The properties are:
- Setup of microphone bias voltage.
- Setup of the speaker pin pull-down.
Also, add the audio power supply property which is dedicated for
the audio codec sub-device.
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-3-6518d953a141@baylibre.com
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add soundcard bindings for the MT8365 SoC with the MT6357 audio codec.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-2-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MT8365 audio front-end bindings
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v7-1-6518d953a141@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull 6.11 devel branch. The conflicts in HD-audio Realtek codec driver
got resolved.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Implement sync, output format, and input status mixer controls, to allow
the interface to be used as a straight ADAT/SPDIF (+ Headphones) I/O
interface.
This does not implement the matrix mixer, output gain controls, or input
level meter feedback. The full mixer interface is only really usable
using a dedicated userspace control app (there are too many mixer nodes
for alsamixer to be usable), so for now we leave it up to userspace to
directly control these features using raw USB control messages. This is
similar to how it's done with some FireWire interfaces (ffado-mixer).
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-2-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add trivial support for audio streaming on the RME Digiface USB. Binds
only to the first interface to allow userspace to directly drive the
complex I/O and matrix mixer controls.
Signed-off-by: Cyan Nyan <cyan.vtb@gmail.com>
[Lina: Added 2x/4x sample rate support & boot/format quirks]
Co-developed-by: Asahi Lina <lina@asahilina.net>
Signed-off-by: Asahi Lina <lina@asahilina.net>
Link: https://patch.msgid.link/20240903-rme-digiface-v2-1-71b06c912e97@asahilina.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The mic in those laptops suffers too high gain resulting in mostly (fan
or else) noise being recorded. In addition to the existing fixup about
mic detection, apply also limiting its boost. While at it, extend the
quirk to also V5[46]0TNE models, which have the same issue.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240903124939.6213-1-marmarek@invisiblethingslab.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Add acp71 revision id to support i2s/tdm mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-13-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add i2s master generation support for acp7.1 platform based on pci device
id.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-12-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add page table entry configurations to support higher sample rate
streams with multiple channels for ACP7.0 platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-11-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add acp70 revision id to support I2S TDM.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-10-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Modify max channels and max sample rate support in the dai driver for
acp7.0 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-9-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set i2s bclk and lrclk for acp7.0 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-8-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add I2S master clock generation support for acp7.0 platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-7-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update pcm hardware capabilities for acp7.0 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-6-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add slots selection and 32-channels TDM support for
acp6.3 platform.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-5-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update pcm hardware capabilities based on acp revision id.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-4-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All I2S instances are connected to different powertile form acp6.0
onwards, refactor dai driver to support all I2S instances for all acp
platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Refactor TDM slots selection based on acp revision id.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The codec can be used in conjunction with an audio-graph-card to provide
an endpoint for binding with the other side of the audio link.
Document the 'port' property that is used for this to prevent
dtbscheck errors like:
rockchip/rk3588-nanopc-t6-lts.dtb: codec@1b: Unevaluated properties are not allowed ('port' was unexpected)
from schema $id: http://devicetree.org/schemas/sound/realtek,rt5616.yaml#
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240830203819.1972536-3-heiko@sntech.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
