summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-03-08netxen_nic: Replace fake flex-array with flexible-array memberGustavo A. R. Silva1-1/+1
Zero-length arrays as fake flexible arrays are deprecated and we are moving towards adopting C99 flexible-array members instead. Transform zero-length array into flexible-array member in struct nx_cardrsp_rx_ctx_t. Address the following warnings found with GCC-13 and -fstrict-flex-arrays=3 enabled: drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:361:26: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c:372:25: warning: array subscript <unknown> is outside array bounds of ‘char[0]’ [-Warray-bounds=] This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -fstrict-flex-arrays=3 [1]. Link: https://github.com/KSPP/linux/issues/21 Link: https://github.com/KSPP/linux/issues/265 Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1] Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/ZAZ57I6WdQEwWh7v@work Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: phy: smsc: simplify lan95xx_config_aneg_extHeiner Kallweit1-10/+7
lan95xx_config_aneg_ext() can be simplified by using phy_set_bits(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/3da785c7-3ef8-b5d3-89a0-340f550be3c2@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: remove enum skb_free_reasonEric Dumazet2-22/+16
enum skb_drop_reason is more generic, we can adopt it instead. Provide dev_kfree_skb_irq_reason() and dev_kfree_skb_any_reason(). This means drivers can use more precise drop reasons if they want to. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/20230306204313.10492-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08net: phy: improve phy_read_poll_timeoutHeiner Kallweit1-3/+2
cond sometimes is (val & MASK) what may result in a false positive if val is a negative errno. We shouldn't evaluate cond if val < 0. This has no functional impact here, but it's not nice. Therefore switch order of the checks. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/6d8274ac-4344-23b4-d9a3-cad4c39517d4@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08Merge branch 'libbpf: usdt arm arg parsing support'Andrii Nakryiko1-78/+118
Puranjay Mohan says: ==================== This series add the support of the ARM architecture to libbpf USDT. This involves implementing the parse_usdt_arg() function for ARM. It was seen that the last part of parse_usdt_arg() is repeated for all architectures, so, the first patch in this series refactors these functions and moved the post processing to parse_usdt_spec() Changes in V2[1] to V3: - Use a tabular approach to find register offsets. - Add the patch for refactoring parse_usdt_arg() ==================== Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2023-03-08libbpf: USDT arm arg parsing supportPuranjay Mohan1-0/+80
Parsing of USDT arguments is architecture-specific; on arm it is relatively easy since registers used are r[0-10], fp, ip, sp, lr, pc. Format is slightly different compared to aarch64; forms are - "size @ [ reg, #offset ]" for dereferences, for example "-8 @ [ sp, #76 ]" ; " -4 @ [ sp ]" - "size @ reg" for register values; for example "-4@r0" - "size @ #value" for raw values; for example "-8@#1" Add support for parsing USDT arguments for ARM architecture. To test the above changes QEMU's virt[1] board with cortex-a15 CPU was used. libbpf-bootstrap's usdt example[2] was modified to attach to a test program with DTRACE_PROBE1/2/3/4... probes to test different combinations. [1] https://www.qemu.org/docs/master/system/arm/virt.html [2] https://github.com/libbpf/libbpf-bootstrap/blob/master/examples/c/usdt.bpf.c Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230307120440.25941-3-puranjay12@gmail.com
2023-03-08libbpf: Refactor parse_usdt_arg() to re-use codePuranjay Mohan1-82/+42
The parse_usdt_arg() function is defined differently for each architecture but the last part of the function is repeated verbatim for each architecture. Refactor parse_usdt_arg() to fill the arg_sz and then do the repeated post-processing in parse_usdt_spec(). Signed-off-by: Puranjay Mohan <puranjay12@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230307120440.25941-2-puranjay12@gmail.com
2023-03-08libbpf: Fix theoretical u32 underflow in find_cd() functionDaniel Müller1-2/+1
Coverity reported a potential underflow of the offset variable used in the find_cd() function. Switch to using a signed 64 bit integer for the representation of offset to make sure we can never underflow. Fixes: 1eebcb60633f ("libbpf: Implement basic zip archive parsing support") Signed-off-by: Daniel Müller <deso@posteo.net> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20230307215504.837321-1-deso@posteo.net
2023-03-08igc: Clean up and optimize watchdog taskSasha Neftin2-19/+0
i225/i226 parts used only one media type copper. The copper media type is not replaceable. Clean up the code accordingly, and remove the obsolete media replacement and reset options. Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-08igc: offload queue max SDU from tc-taprioTan Tee Min3-4/+31
Add support for configuring the max SDU for each Tx queue. If not specified, keep the default. Signed-off-by: Tan Tee Min <tee.min.tan@linux.intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-08igc: Add qbv_config_change_errors counterMuhammad Husaini Zulkifli4-0/+15
Add ConfigChangeError(qbv_config_change_errors) when user try to set the AdminBaseTime to past value while the current GCL is still running. The ConfigChangeError counter should not be increased when a gate control list is scheduled into the future. User can use "ethtool -S <interface> | grep qbv_config_change_errors" command to check the counter values. Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-08ynl: re-license uniformly under GPL-2.0 OR BSD-3-ClauseJakub Kicinski20-18/+28
I was intending to make all the Netlink Spec code BSD-3-Clause to ease the adoption but it appears that: - I fumbled the uAPI and used "GPL WITH uAPI note" there - it gives people pause as they expect GPL in the kernel As suggested by Chuck re-license under dual. This gives us benefit of full BSD freedom while fulfilling the broad "kernel is under GPL" expectations. Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/ Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08mailmap: update entries for Stephen HemmingerStephen Hemminger1-1/+4
Map all my old email addresses to current address. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20230306194405.108236-1-stephen@networkplumber.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08mailmap: add entry for Maxim MikityanskiyJakub Kicinski1-0/+2
Map Maxim's old corporate addresses to his personal one. Link: https://lore.kernel.org/r/20230306192018.3894988-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08nfc: change order inside nfc_se_io error pathFedor Pchelkin1-1/+1
cb_context should be freed on the error path in nfc_se_io as stated by commit 25ff6f8a5a3b ("nfc: fix memory leak of se_io context in nfc_genl_se_io"). Make the error path in nfc_se_io unwind everything in reverse order, i.e. free the cb_context after unlocking the device. Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230306212650.230322-1-pchelkin@ispras.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-03-08wifi: iwlwifi: mvm: fix EOF bit reportingJohannes Berg1-18/+10
In monitor mode, we try to report the EOF bit on the first MPDU of an A-MPDU (hardware duplicates this bit over all MPDUs, so it's only trustable on the first). However, due to reshuffling in an ealier commit, the toggle_bit != mvm->ampdu_toggle logic can no longer work since mvm->ampdu_toggle is now set before this code runs. Fix this by tracking the first_subframe status in the phy data struct and using that instead of checking. Fixes: f1490546bec9 ("wifi: iwlwifi: mvm: rxmq: refactor mac80211 rx_status setting") Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.e273aa0d3fdc.I77db4cc247898eae8a98b80659386d6737052b95@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-08ethernet: ice: avoid gcc-9 integer overflow warningArnd Bergmann1-4/+4
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178b302 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-08ice: don't ignore return codes in VSI related codeMichal Swiatkowski1-7/+10
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780a577 ("ice: split ice_vsi_setup into smaller functions") Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-08ice: Fix DSCP PFC TLV creationDave Ertman1-1/+1
When creating the TLV to send to the FW for configuring DSCP mode PFC,the PFCENABLE field was being masked with a 4 bit mask (0xF), but this is an 8 bit bitmask for enabled classes for PFC. This means that traffic classes 4-7 could not be enabled for PFC. Remove the mask completely, as it is not necessary, as we are assigning 8 bits to an 8 bit field. Fixes: 2a87bd73e50d ("ice: Add DSCP support") Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Karen Ostrowska <karen.ostrowska@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-03-07cpumask: be more careful with 'cpumask_setall()'Linus Torvalds1-5/+5
Commit 596ff4a09b89 ("cpumask: re-introduce constant-sized cpumask optimizations") changed cpumask_setall() to use "bitmap_set()" instead of "bitmap_fill()", because bitmap_fill() would explicitly set all the bits of a constant sized small bitmap, and that's exactly what we don't want: we want to only set bits up to 'nr_cpu_ids', which is what "bitmap_set()" does. However, Yury correctly points out that while "bitmap_set()" does indeed only set bits up to the required bitmap size, it doesn't _clear_ bits above that size, so the upper bits would still not have well-defined values. Now, none of this should really matter, since any bits set past 'nr_cpu_ids' should always be ignored in the first place. Yes, the bit scanning functions might return them as a result, but since users should always consider the ">= nr_cpu_ids" condition to mean "no more bits", that shouldn't have any actual effect (see previous commit 8ca09d5fa354 "cpumask: fix incorrect cpumask scanning result checks"). But let's just do it right, the way the code was _intended_ to work. We have had enough lazy code that works but bites us in the *rse later (again, see previous commit) that there's no reason to not just do this properly. It turns out that "bitmap_fill()" gets this all right for the complex case, and really only fails for the inlined optimized case that just fills the whole word. And while we could just fix bitmap_fill() to use the proper last word mask, there's two issues with that: - the cpumask case wants to do the _optimization_ based on "NR_CPUS is a small constant", but then wants to do the actual bit _fill_ based on "nr_cpu_ids" that isn't necessarily that same constant - we have lots of non-cpumask users of bitmap_fill(), and while they hopefully don't care, and probably would want the proper semantics anyway ("only set bits up to the limit"), I do not want the cpumask changes to impact other parts So this ends up just doing the single-word optimization by hand in the cpumask code. If our cpumask is fundamentally limited to a single word, just do the proper "fill in that word" exactly. And if it's the more complex multi-word case, then the generic bitmap_fill() will DTRT. This is all an example of how our bitmap function optimizations really are somewhat broken. They conflate the "this is size of the bitmap" optimizations with the actual bit(s) we want to set. In many cases we really want to have the two be separate things: sometimes we base our optimizations on the size of the whole bitmap ("I know this whole bitmap fits in a single word, so I'll just use single-word accesses"), and sometimes we base them on the bit we are looking at ("this is just acting on bits that are in the first word, so I'll use single-word accesses"). Notice how the end result of the two optimizations are the same, but the way we get to them are quite different. And all our cpumask optimization games are really about that fundamental distinction, and we'd often really want to pass in both the "this is the bit I'm working on" (which _can_ be a small constant but might be variable), and "I know it's in this range even if it's variable" (based on CONFIG_NR_CPUS). So this cpumask_setall() implementation just makes that explicit. It checks the "I statically know the size is small" using the known static size of the cpumask (which is what that 'small_cpumask_bits' is all about), but then sets the actual bits using the exact number of cpus we have (ie 'nr_cpumask_bits') Of course, in a perfect world, the compiler would have done all the range analysis (possibly with help from us just telling it that "this value is always in this range"), and would do all of this for us. But that is not the world we live in. While we dream of that perfect world, this does that manual logic to make it all work out. And this was a very long explanation for a small code change that shouldn't even matter. Reported-by: Yury Norov <yury.norov@gmail.com> Link: https://lore.kernel.org/lkml/ZAV9nGG9e1%2FrV+L%2F@yury-laptop/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-03-07wifi: iwlwifi: Do not include radiotap EHT user info if not neededIlan Peer1-21/+37
Do not include user information in radtiotap EHT data for EHT sounding NDP as the frame doesn't include the user specific field. Instead, encode the NSS and the beamforming information in the EHT data. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.ac6474ded9bd.I9655589e9afbacc16820f35f6f5d90c6a91b8b05@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: add EHT RU allocation to radiotapMordechay Goodstein2-10/+95
FW new API added the info missing for update RU allocation, so use the new API to update radiotap information. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.b16acaa4bad1.I53afa03058dbd2cd8afbaf5e82596c8ed501a476@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: Update logs for yoyo reset sw changesMukesh Sisodiya1-9/+11
Update the log category for the reset-fw changes. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.852a6b5f95fa.Ie67bd28da65c7e42424cacb37495930475de2dad@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: clean up duplicated definesMordechay Goodstein5-24/+13
VHT, HE and EHT rates use the same bits for NSS, so no need for defines per PHY version. Also use spatch to replace bit manipulation with FIELD_GET: @@ identifier rate; @@ -((rate & RATE_MCS_NSS_MSK) >> RATE_MCS_NSS_POS) +FIELD_GET(RATE_MCS_NSS_MSK, rate) Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.167ed9477aa8.Ibd8e71d31896e8d8f067ce4e3a6e9a0e86c78f3f@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: rs-fw: break out for unsupported bandwidthMordechay Goodstein1-2/+6
Currently the for loop runs also over unsupported bandwidth in the command, shorten the path in case we don't support it. Also use the right macro for setting BW20. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.0264ba9df63b.I6c7c9efc806e0ffb7cb3b6051b2d109646e8708c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: Add support for B step of BnJ-Fm4Golan Ben Ami3-0/+18
Support new HW step of BnJ-Fm4 device Signed-off-by: Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.bb0591c59898.If04d7a45707ba008981f8c8ea7f7f107880f146c@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: make flush code a bit clearerJohannes Berg1-1/+2
The mask building here is only relevant for the old TX API, so move it into the else branch. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.c0795543f254.I302124a8584dd049577b0c2c74ecd7c48ddf4f3e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: avoid UB shift of snif_queueJohannes Berg1-1/+9
For the old TX API we need the tfd_queue_msk, but for the new TX API we don't need it here because we add it to the station later. However, for the new API mvm->snif_queue is set to IWL_MVM_INVALID_QUEUE == 0xffff, so the BIT() here is undefined behaviour. Since we don't need the tfd_queue_msk value for the new TX API at all, simply fill it in only for the old API. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.b8da0b7eb194.I53744fd7cfb6e146a9393272a2a61852841238d9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: add primary 80 known for EHT radiotapMordechay Goodstein3-1/+40
Calculate the position of the control channel in the wide channel based on the chandef, this is used to obtain the value of N in 802.11be D1.5 Table 9-53a in the column PHY MU/MRU index. To avoid the need to calculate every frame the value, do it once monitor vif is added. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.fe9a5b58e241.I291ee480252d098f62d9ec39040284d3e521d88e@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: parse FW frame metadata for EHT sniffer modeMordechay Goodstein2-23/+213
In EHT sniffer mode DW4 is all used for sniffer data (unlike we have in HE mode), so move the full DW4 into a union, and we extract the new data5 used for parsing USIG info and set all to radiotap TLVs with the extracted data. Also parse OFDM_RX_VECTOR_USIG_A1_OUT and OFDM_RX_VECTOR_USIG_A2_OUT for rx_no_data notification. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.557d3870753b.I4e9fa4d21900a187753529d46956ba2a7ee75fda@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: decode USIG_B1_B7 RU to nl80211 RU widthMordechay Goodstein1-0/+71
This is based on 802.11be D1.5 table 9-53a Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.0b720d6d6a48.I0034dd108696223494799d3ffe4f09685800b831@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: rename define to generic nameMordechay Goodstein2-2/+2
The type RX_NO_DATA_INFO_TYPE_HE_TB_UNMATCHED is applied to all TB frames including EHT mode, so rename accordingly. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.e4f51f347e48.I2d6ecb6eadc95666d2ef9794662ee779488ceac1@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: allow Microsoft to use TASAlon Giladi1-0/+5
Add Microsoft to the list of OEMs which allowed to use TAS. Signed-off-by: Alon Giladi <alon.giladi@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.662967fec1cc.Icb30cddc049cb5402fd5ab2ce7f95033e478b1b9@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: add all EHT based on data0 info from HWMordechay Goodstein2-3/+73
Update all radiotap EHT TLVs that we can extract from data0 in HW. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.730f219e02ee.Ife3dd85c65758694d7602e8bc8660887d77faacf@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: add EHT radiotap info based on rate_n_flagsMordechay Goodstein2-7/+152
rate_n_flags is always present in the data so at least give all of the information we can extract from rate_n_flags Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.b1c7d49ad35e.Ie2412ac6f88700aa3767ff95ffb52a806b13b7ce@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: iwlwifi: mvm: add an helper function radiotap TLVsMordechay Goodstein1-17/+26
Add a helper function setting type, length, zeroing out TLV data and including adding padding if necessary. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.8ac5195bb3e6.I19ad99c1ad3108453aede64bddf6ef1a7c4a0b74@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07wifi: radiotap: separate vendor TLV into header/contentMordechay Goodstein3-21/+29
To be able to use a general function later for any kind of TLV, separate the vendor TLV header/content in the structs. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230305124407.8ac5195bb3e6.I19ad99c1ad3108453aede64bddf6ef1a7c4a0b74@changeid [separate from the original combined patch] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2023-03-07Merge branch 'bpf: bpf memory usage'Alexei Starovoitov24-15/+273
Yafang Shao says: ==================== Currently we can't get bpf memory usage reliably either from memcg or from bpftool. In memcg, there's not a 'bpf' item in memory.stat, but only 'kernel', 'sock', 'vmalloc' and 'percpu' which may related to bpf memory. With these items we still can't get the bpf memory usage, because bpf memory usage may far less than the kmem in a memcg, for example, the dentry may consume lots of kmem. bpftool now shows the bpf memory footprint, which is difference with bpf memory usage. The difference can be quite great in some cases, for example, - non-preallocated bpf map The non-preallocated bpf map memory usage is dynamically changed. The allocated elements count can be from 0 to the max entries. But the memory footprint in bpftool only shows a fixed number. - bpf metadata consumes more memory than bpf element In some corner cases, the bpf metadata can consumes a lot more memory than bpf element consumes. For example, it can happen when the element size is quite small. - some maps don't have key, value or max_entries For example the key_size and value_size of ringbuf is 0, so its memlock is always 0. We need a way to show the bpf memory usage especially there will be more and more bpf programs running on the production environment and thus the bpf memory usage is not trivial. This patchset introduces a new map ops ->map_mem_usage to calculate the memory usage. Note that we don't intend to make the memory usage 100% accurate, while our goal is to make sure there is only a small difference between what bpftool reports and the real memory. That small difference can be ignored compared to the total usage. That is enough to monitor the bpf memory usage. For example, the user can rely on this value to monitor the trend of bpf memory usage, compare the difference in bpf memory usage between different bpf program versions, figure out which maps consume large memory, and etc. This patchset implements the bpf memory usage for all maps, and yet there's still work to do. We don't want to introduce runtime overhead in the element update and delete path, but we have to do it for some non-preallocated maps, - devmap, xskmap When we update or delete an element, it will allocate or free memory. In order to track this dynamic memory, we have to track the count in element update and delete path. - cpumap The element size of each cpumap element is not determinated. If we want to track the usage, we have to count the size of all elements in the element update and delete path. So I just put it aside currently. - local_storage, bpf_local_storage When we attach or detach a cgroup, it will allocate or free memory. If we want to track the dynamic memory, we also need to do something in the update and delete path. So I just put it aside currently. - offload map The element update and delete of offload map is via the netdev dev_ops, in which it may dynamically allocate or free memory, but this dynamic memory isn't counted in offload map memory usage currently. The result of each map can be found in the individual patch. We may also need to track per-container bpf memory usage, that will be addressed by a different patchset. Changes: v3->v4: code improvement on ringbuf (Andrii) use READ_ONCE() to read lpm_trie (Tao) explain why we can't get bpf memory usage from memcg. v2->v3: check callback at map creation time and avoid warning (Alexei) fix build error under CONFIG_BPF=n (lkp@intel.com) v1->v2: calculate the memory usage within bpf (Alexei) - [v1] bpf, mm: bpf memory usage https://lwn.net/Articles/921991/ - [RFC PATCH v2] mm, bpf: Add BPF into /proc/meminfo https://lwn.net/Articles/919848/ - [RFC PATCH v1] mm, bpf: Add BPF into /proc/meminfo https://lwn.net/Articles/917647/ - [RFC PATCH] bpf, mm: Add a new item bpf into memory.stat https://lore.kernel.org/bpf/20220921170002.29557-1-laoar.shao@gmail].com/ ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: enforce all maps having memory usage callbackYafang Shao1-7/+3
We have implemented memory usage callback for all maps, and we enforce any newly added map having a callback as well. We check this callback at map creation time. If it doesn't have the callback, we will return EINVAL. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-19-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: offload map memory usageYafang Shao3-0/+13
A new helper is introduced to calculate offload map memory usage. But currently the memory dynamically allocated in netdev dev_ops, like nsim_map_update_elem, is not counted. Let's just put it aside now. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-18-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf, net: xskmap memory usageYafang Shao2-0/+14
A new helper is introduced to calculate xskmap memory usage. The xfsmap memory usage can be dynamically changed when we add or remove a xsk_map_node. Hence we need to track the count of xsk_map_node to get its memory usage. The result as follows, - before 10: xskmap name count_map flags 0x0 key 4B value 4B max_entries 65536 memlock 524288B - after 10: xskmap name count_map flags 0x0 <<< no elements case key 4B value 4B max_entries 65536 memlock 524608B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-17-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf, net: sock_map memory usageYafang Shao1-0/+20
sockmap and sockhash don't have something in common in allocation, so let's introduce different helpers to calculate their memory usage. The reuslt as follows, - before 28: sockmap name count_map flags 0x0 key 4B value 4B max_entries 65536 memlock 524288B 29: sockhash name count_map flags 0x0 key 4B value 4B max_entries 65536 memlock 524288B - after 28: sockmap name count_map flags 0x0 key 4B value 4B max_entries 65536 memlock 524608B 29: sockhash name count_map flags 0x0 <<<< no updated elements key 4B value 4B max_entries 65536 memlock 1048896B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-16-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf, net: bpf_local_storage memory usageYafang Shao6-0/+15
A new helper is introduced into bpf_local_storage map to calculate the memory usage. This helper is also used by other maps like bpf_cgrp_storage, bpf_inode_storage, bpf_task_storage and etc. Note that currently the dynamically allocated storage elements are not counted in the usage, since it will take extra runtime overhead in the elements update or delete path. So let's put it aside now, and implement it in the future when someone really need it. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-15-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: local_storage memory usageYafang Shao1-0/+7
A new helper is introduced to calculate local_storage map memory usage. Currently the dynamically allocated elements are not counted, since it will take runtime overhead in the element update or delete path. So let's put it aside currently, and implement it in the future if the user really needs it. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-14-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: bpf_struct_ops memory usageYafang Shao1-0/+16
A new helper is introduced to calculate bpf_struct_ops memory usage. The result as follows, - before 1: struct_ops name count_map flags 0x0 key 4B value 256B max_entries 1 memlock 4096B btf_id 73 - after 1: struct_ops name count_map flags 0x0 key 4B value 256B max_entries 1 memlock 5016B btf_id 73 Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-13-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: queue_stack_maps memory usageYafang Shao1-0/+10
A new helper is introduced to calculate queue_stack_maps memory usage. The result as follows, - before 20: queue name count_map flags 0x0 key 0B value 4B max_entries 65536 memlock 266240B 21: stack name count_map flags 0x0 key 0B value 4B max_entries 65536 memlock 266240B - after 20: queue name count_map flags 0x0 key 0B value 4B max_entries 65536 memlock 524288B 21: stack name count_map flags 0x0 key 0B value 4B max_entries 65536 memlock 524288B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-12-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: devmap memory usageYafang Shao1-2/+24
A new helper is introduced to calculate the memory usage of devmap and devmap_hash. The number of dynamically allocated elements are recored for devmap_hash already, but not for devmap. To track the memory size of dynamically allocated elements, this patch also count the numbers for devmap. The result as follows, - before 40: devmap name count_map flags 0x80 key 4B value 4B max_entries 65536 memlock 524288B 41: devmap_hash name count_map flags 0x80 key 4B value 4B max_entries 65536 memlock 524288B - after 40: devmap name count_map flags 0x80 <<<< no elements key 4B value 4B max_entries 65536 memlock 524608B 41: devmap_hash name count_map flags 0x80 <<<< no elements key 4B value 4B max_entries 65536 memlock 524608B Note that the number of buckets is same with max_entries for devmap_hash in this case. Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-11-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: cpumap memory usageYafang Shao1-0/+10
A new helper is introduced to calculate cpumap memory usage. The size of cpu_entries can be dynamically changed when we update or delete a cpumap element, but this patch doesn't include the memory size of cpu_entry yet. We can dynamically calculate the memory usage when we alloc or free a cpu_entry, but it will take extra runtime overhead, so let just put it aside currently. Note that the size of different cpu_entry may be different as well. The result as follows, - before 48: cpumap name count_map flags 0x4 key 4B value 4B max_entries 64 memlock 4096B - after 48: cpumap name count_map flags 0x4 key 4B value 4B max_entries 64 memlock 832B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-10-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: bloom_filter memory usageYafang Shao1-0/+12
Introduce a new helper to calculate the bloom_filter memory usage. The result as follows, - before 16: bloom_filter flags 0x0 key 0B value 8B max_entries 65536 memlock 524288B - after 16: bloom_filter flags 0x0 key 0B value 8B max_entries 65536 memlock 65856B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Link: https://lore.kernel.org/r/20230305124615.12358-9-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2023-03-07bpf: ringbuf memory usageYafang Shao1-1/+19
A new helper ringbuf_map_mem_usage() is introduced to calculate ringbuf memory usage. The result as follows, - before 15: ringbuf name count_map flags 0x0 key 0B value 0B max_entries 65536 memlock 0B - after 15: ringbuf name count_map flags 0x0 key 0B value 0B max_entries 65536 memlock 78424B Signed-off-by: Yafang Shao <laoar.shao@gmail.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20230305124615.12358-8-laoar.shao@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 12:58:02 +0300