summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-03-10can: gs_usb: add quirk for CANtact Pro overlapping GS_USB_BREQ valueMarc Kleine-Budde1-1/+13
For the GS_USB_BREQ_DATA_BITTIMING USB control message the CANtact Pro firmware uses a request value, which is already used by the candleLight firmware for a different purpose (GS_USB_BREQ_GET_USER_ID). This patch adds a quirk to use the CANtact Pro's value for the GS_USB_BREQ_DATA_BITTIMING USB control message instead of the official one. Link: https://lore.kernel.org/all/20220309124132.291861-18-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add usb quirk for NXP LPC546xx controllersPeter Fink1-2/+27
Introduce a workaround for a NXP chip errata on LPC546xx controllers (Errata sheet LPC546xx / USB.15). According to the document corruption can occur when the following conditions are met: * A TX (IN) transfer happens after a RX (OUT) transfer. * The RX (OUT) transfer length is 4 + N * 16 (N >= 0) bytes. Even though the struct gs_host_frame has a size of 76 bytes for a FD frame, which does not apply to the above rule, corruption could be seen. Adding a dummy byte to break the second condition also on transfer lengths with 4 + N * 8 bytes reliably circumvents USB transfer data corruption. The firmware can now request this quirk by setting GS_CAN_FEATURE_REQ_USB_QUIRK_LPC546XX. Link: https://lore.kernel.org/all/20220309124132.291861-17-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Christoph Möhring <cmoehring@christ-es.de> Signed-off-by: Alexander Schartner <aschartner@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add CAN-FD supportPeter Fink1-16/+108
CANtact Pro from Linklayer is the first gs_usb compatible device supporting CAN-FD with a different HW and re-written candlelight FW. Support for CAN-FD is indicated by the device setting the GS_CAN_FEATURE_FD flag. CAN-FD support is requested by the driver with the GS_CAN_MODE_FD flag. The CAN-FD specific data bit timing parameters are set with the GS_USB_BREQ_DATA_BITTIMING control message. This patch is based on the Eric Evenchick's gs_usb_fd driver (which itself is a fork of gs_usb). The gs_usb_fd code base was reintegrated into the gs_usb driver, and reworked to not break the existing classical-CAN only hardware. Link: https://lore.kernel.org/all/20220309124132.291861-16-mkl@pengutronix.de Link: https://github.com/linklayer/gs_usb_fd/issues/2 Co-developed-by: Eric Evenchick <eric@evenchick.com> Signed-off-by: Eric Evenchick <eric@evenchick.com> Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: use union and FLEX_ARRAY for data in struct gs_host_framePeter Fink1-11/+26
Modify struct gs_host_frame to make use of a union and DECLARE_FLEX_ARRAY to be able to store different data (lengths), which will be added in later commits. Store the gs_host_frame length in TX direction (host -> device) in struct gs_can::hf_size_tx and RX direction (device -> host) in struct gs_usb::hf_size_rx so it must be calculated only once. Link: https://lore.kernel.org/all/20220309124132.291861-15-mkl@pengutronix.de Signed-off-by: Peter Fink <pfink@christ-es.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: support up to 3 channels per deviceMarc Kleine-Budde1-2/+2
Some STM32G3 chips support up to 3 CAN-FD channels, increase number of supported channels in this driver to 3 accordingly. Link: https://lore.kernel.org/all/20220309124132.291861-14-mkl@pengutronix.de Suggested-by: Ryan Edwards <ryan.edwards@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: gs_usb_probe(): introduce udev and make use of itMarc Kleine-Budde1-5/+4
Introduce the variable udev in the gs_usb_probe() function to hold a pointer to the struct usb_device. This avoids recalculating the value several times in this function. Link: https://lore.kernel.org/all/20220309124132.291861-13-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: document the PAD_PKTS_TO_MAX_PKT_SIZE featureMarc Kleine-Budde1-0/+2
The widely used open source firmware candleLight supports padding the USB packets to max packet size to improve performance on Windows systems. This patch documents the bit. Link: https://lore.kernel.org/all/20220309124132.291861-12-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/pull/7 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: document the USER_ID featureMarc Kleine-Budde1-0/+4
The widely used open source firmware candleLight has optional support for reading/writing of an user defined value into the device's flash. This is indicated by the GS_CAN_FEATURE_USER_ID feature. The corresponding request are GS_USB_BREQ_GET_USER_ID and GS_USB_BREQ_SET_USER_ID. This patch documents these values. Link: https://lore.kernel.org/all/20220309124132.291861-11-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/commit/1453d70dc9a9d98ac254893ba5114b8e826e0e39 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: update GS_CAN_FEATURE_IDENTIFY documentationMarc Kleine-Budde1-0/+1
In the binary interface a feature bit might have a corresponding mode bit (of the same value). The GS_CAN_FEATURE_IDENTIFY feature doesn't come with a mode. Document this, to avoid gaps when adding more features/modes later. Link: https://lore.kernel.org/all/20220309124132.291861-10-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: add HW timestamp mode bitMarc Kleine-Budde1-0/+1
Newer versions of the widely used open source firmware candleLight support hardware timestamps. The support is activated by setting the GS_CAN_MODE_HW_TIMESTAMP in the GS_USB_BREQ_MODE request. Although timestamp support is not yet supported by this driver, add the missing bit for documentation purpose. Link: https://lore.kernel.org/all/20220309124132.291861-9-mkl@pengutronix.de Link: https://github.com/candle-usb/candleLight_fw/commit/44431f4a4354a878fbd15b273bf04fce1dcdff7e Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: gs_make_candev(): call SET_NETDEV_DEV() after handling all ↵Marc Kleine-Budde1-2/+2
bt_const->feature This patch moves the call to SET_NETDEV_DEV() after all handling (including cleanup) of the bt_const->feature is done. This looks more consistent. Link: https://lore.kernel.org/all/20220309124132.291861-8-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: rewrap usb_control_msg() and usb_fill_bulk_urb()Marc Kleine-Budde1-65/+22
This patch rewraps the arguments of usb_control_msg() and usb_fill_bulk_urb() to make full use of the standard line length of 80 characters. Link: https://lore.kernel.org/all/20220309124132.291861-7-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: rewrap error messagesMarc Kleine-Budde1-4/+2
This patch rewraps the arguments of netdev_err() to make full use of the standard line length of 80 characters. Link: https://lore.kernel.org/all/20220309124132.291861-6-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: GS_CAN_FLAG_OVERFLOW: make use of BIT()Marc Kleine-Budde1-1/+1
This patch converts the driver to use BIT() to define flags. Link: https://lore.kernel.org/all/20220309124132.291861-5-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: sort include files alphabeticallyMarc Kleine-Budde1-1/+1
This patch sorts the include files alphabetically. Link: https://lore.kernel.org/all/20220309124132.291861-4-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: fix checkpatch warningMarc Kleine-Budde1-1/+2
This patch fixes a checkpatch warning by converting a "unsigned" into an "unsigned int". Link: https://lore.kernel.org/all/20220309124132.291861-3-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: gs_usb: use consistent one space indentionMarc Kleine-Budde1-19/+19
With this patch a consistent one space indention throughout the whole driver is used. Link: https://lore.kernel.org/all/20220309124132.291861-2-mkl@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: rcar_canfd: Add support for r8a779a0 SoCUlrich Hecht1-136/+217
Adds support for the CANFD IP variant in the V3U SoC. Differences to controllers in other SoCs are limited to an increase in the number of channels from two to eight, an absence of dedicated registers for "classic" CAN mode, and a number of differences in magic numbers (register offsets and layouts). Inspired by BSP patch by Kazuya Mizuguchi. Link: https://lore.kernel.org/all/20220309162609.3726306-2-uli+renesas@fpond.eu Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10dt-bindings: can: renesas,rcar-canfd: Document r8a779a0 supportUlrich Hecht1-0/+2
Document support for rcar_canfd on R8A779A0 (V3U) SoCs. Link: https://lore.kernel.org/all/20220309162609.3726306-5-uli+renesas@fpond.eu Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: etas_es58x: es58x_fd_rx_event_msg(): initialize rx_event_msg before ↵Vincent Mailhol1-2/+1
calling es58x_check_msg_len() Function es58x_fd_rx_event() invokes the es58x_check_msg_len() macro: | ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len); While doing so, it dereferences an uninitialized variable: *rx_event_msg. This is actually harmless because es58x_check_msg_len() only uses preprocessor macros (sizeof() and __stringify()) on *rx_event_msg. c.f. [1]. Nonetheless, this pattern is confusing so the lines are reordered to make sure that rx_event_msg is correctly initialized. This patch also fixes a false positive warning reported by cppcheck: | cppcheck possible warnings: (new ones prefixed by >>, may not be real problems) | | In file included from drivers/net/can/usb/etas_es58x/es58x_fd.c: | >> drivers/net/can/usb/etas_es58x/es58x_fd.c:174:8: warning: Uninitialized variable: rx_event_msg [uninitvar] | ret = es58x_check_msg_len(es58x_dev->dev, *rx_event_msg, msg_len); | ^ [1] https://elixir.bootlin.com/linux/v5.16/source/drivers/net/can/usb/etas_es58x/es58x_core.h#L467 Link: https://lore.kernel.org/all/20220306101302.708783-1-mailhol.vincent@wanadoo.fr Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10vxcan: enable local echo for sent CAN framesOliver Hartkopp1-1/+1
The vxcan driver provides a pair of virtual CAN interfaces to exchange CAN traffic between different namespaces - analogue to veth. In opposite to the vcan driver the local sent CAN traffic on this interface is not echo'ed back but only sent to the remote peer. This is unusual and can be easily fixed by removing IFF_ECHO from the netdevice flags that are set for vxcan interfaces by default at startup. Without IFF_ECHO set on driver level, the local sent CAN frames are echo'ed in af_can.c in can_send(). This patch makes vxcan interfaces adopt the same local echo behavior and procedures as known from the vcan interfaces. Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/all/20220309120416.83514-5-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10vxcan: remove sk reference in peer skbOliver Hartkopp1-6/+11
With can_create_echo_skb() the skb which is forwarded to the peer CAN interface shares the sk pointer from the originating socket. This makes the CAN frame show up in the peer namespace as a TX packet. With the use of skb_clone() analogue to the handling in gw.c the peer skb gets a new start in the peer namespace and correctly appears as a RX packet. Link: https://lore.kernel.org/all/20220309120416.83514-4-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: isotp: set max PDU size to 64 kByteOliver Hartkopp1-2/+2
The reason to extend the max PDU size from 4095 Byte (12 bit length value) to a 32 bit value (up to 4 GByte) was to be able to flash 64 kByte bootloaders with a single ISO-TP PDU. The max PDU size in the Linux kernel implementation was set to 8200 Bytes to be able to test the length information escape sequence. It turns out that the demand for 64 kByte PDUs is real so the value for MAX_MSG_LENGTH is set to 66000 to be able to potentially add some checksums to the 65.536 Byte block. Link: https://github.com/linux-can/can-utils/issues/347#issuecomment-1056142301 Link: https://lore.kernel.org/all/20220309120416.83514-3-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: isotp: set default value for N_As to 50 micro secondsOliver Hartkopp2-7/+33
The N_As value describes the time a CAN frame needs on the wire when transmitted by the CAN controller. Even very short CAN FD frames need arround 100 usecs (bitrate 1Mbit/s, data bitrate 8Mbit/s). Having N_As to be zero (the former default) leads to 'no CAN frame separation' when STmin is set to zero by the receiving node. This 'burst mode' should not be enabled by default as it could potentially dump a high number of CAN frames into the netdev queue from the soft hrtimer context. This does not affect the system stability but is just not nice and cooperative. With this N_As/frame_txtime value the 'burst mode' is disabled by default. As user space applications usually do not set the frame_txtime element of struct can_isotp_options the new in-kernel default is very likely overwritten with zero when the sockopt() CAN_ISOTP_OPTS is invoked. To make sure that a N_As value of zero is only set intentional the value '0' is now interpreted as 'do not change the current value'. When a frame_txtime of zero is required for testing purposes this CAN_ISOTP_FRAME_TXTIME_ZERO u32 value has to be set in frame_txtime. Link: https://lore.kernel.org/all/20220309120416.83514-2-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10can: isotp: add local echo tx processing for consecutive framesOliver Hartkopp1-80/+139
Instead of dumping the CAN frames into the netdevice queue the process to transmit consecutive frames (CF) now waits for the frame to be transmitted and therefore echo'ed from the CAN interface. Link: https://lore.kernel.org/all/20220309120416.83514-1-socketcan@hartkopp.net Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-03-10iwlwifi: bump FW API to 72 for AX devicesLuca Coelho1-2/+2
Start supporting API version 72 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8de72a8ea67f.I66681363afeb34c619379a5989090264fe6b5f2a@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: acpi: move ppag code from mvm to fw/acpiMatt Chen3-184/+234
Move the ppag code to fw/acpi to keep consistency with the other ACPI handling we do. Signed-off-by: Matt Chen <matt.chen@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.7f250088b443.I61e64c2758ad178da729ce00428287cc94430eed@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: dbg: check trigger data before accessMordechay Goodstein1-0/+5
Without trigger data set, no point in any collection. so check that we have the info for collecting the data. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5fb34fb1f0eb.I4d7f2a4d162e80474540c5caf1194ed7d32977bc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: dbg: in sync mode don't call scheduleMordechay Goodstein1-2/+2
Today in the code we have two options for collecting data sync/schedule, the two options call the same function and can lead to racing in free resources after done. So we call only one of two sync/schedule, and in case of sync only call sync function without also schedule to immediately run as a side job. Signed-off-by: Mordechay Goodstein <mordechay.goodstein@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.88574097ce1b.I1b42297619d638d677a2300ed9a95105c1262101@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: use 4k queue size for Bz A-stepJohannes Berg1-0/+4
There's a hardware bug in Bz A-step that can be worked around by using 4k queue size, so do that. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.10ea0e115d05.Idfb3706133bf3b15f1f68f1145e77e89947449d1@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: pcie: fix SW error MSI-X mappingJohannes Berg1-1/+1
We need to also update the IVAR location, since we've shifted the bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Fixes: 571836a02c7b ("iwlwifi: pcie: update sw error interrupt for BZ family") Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.bcfb28484e50.I921df6b5134785d7eeb0c934e4a43157c582fa79@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: yoyo: dump IMR DRAM only for HW and FW errorMukesh Sisodiya1-0/+25
Support debug collection of the platform IMR memory region only for HW and FW error. This region needs to be collected as the last region. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.5b70e5ba9a41.I502f9b6179b97b163992729edd2b3c5c4ca9e311@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: mvm: add support for IMR based on platformMukesh Sisodiya5-4/+28
Driver needs to enable IMR which is needed for debug on certain platforms, so add a device config flag to set it. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.0b96b2760503.I08bc741c8c497a2edbe4784cdab6abd8d04c62f3@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: yoyo: disable IMR DRAM region if IMR is disabledMukesh Sisodiya1-0/+23
Disable IMR region if it is enabled in the TLVs, but disabled at runtime by the FW. Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.2a696656a161.I99705472a8838121ffaca72977015dc2069549b9@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: mvm: remove cipher scheme supportJohannes Berg5-97/+1
There are no shipping firmware versions with this, and there will also not be in the future, so remove the support. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.8b3c8b4adf41.Ib3ddb6b250ea2dd72b4ecc88bdd5cffb86af1dcc@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: Configure FW debug preset via module param.Ayala Barazani3-7/+43
The module param "enable_ini" is currently used to be enable/disable ini. Add the option to configure the FW debug preset via this module param, by change it type from boolean to an integer. Signed-off-by: Ayala Barazani <ayala.barazani@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.4929e4b14956.I1bdffa4c37d4ee349aa0001978b716b96e38b090@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: mvm: add a flag to reduce power command.Ayala Barazani6-9/+44
Add a flags bitfield in REDUCED_TX_POWER_CMD, and send it as is to FW. Signed-off-by: Ayala Barazani <ayala.barazani@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.55c2f014f5ee.Iceb632f620de959800f979e212f0dc20240f9d38@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10iwlwifi: bump FW API to 71 for AX devicesLuca Coelho1-1/+1
Start supporting API version 71 for AX devices. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/iwlwifi.20220304131517.d0898482506f.I2de2f9140c23f39a837f68199bbaf15a20f26abb@changeid Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
2022-03-10af_key: add __GFP_ZERO flag for compose_sadb_supported in function ↵Haimin Zhang1-1/+1
pfkey_register Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register to initialize the buffer of supp_skb to fix a kernel-info-leak issue. 1) Function pfkey_register calls compose_sadb_supported to request a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then compose_sadb_supported treats the memory as a struct sadb_supported and begins to initialize. But it just initializes the field sadb_supported_len and field sadb_supported_exttype without field sadb_supported_reserved. Reported-by: TCS Robot <tcs_robot@tencent.com> Signed-off-by: Haimin Zhang <tcs_kernel@tencent.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2022-03-10Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds6-9/+42
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "One more small batch of clk driver fixes: - A fix for the Qualcomm GDSC power domain delays that avoids black screens at boot on some more recent SoCs that use a different delay than the hard-coded delays in the driver. - A build fix LAN966X clk driver that let it be built on architectures that didn't have IOMEM" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: lan966x: Fix linking error clk: qcom: dispcc: Update the transition delay for MDSS GDSC clk: qcom: gdsc: Add support to update GDSC transition delay
2022-03-10Merge tag 'xsa396-5.17-tag' of ↵Linus Torvalds10-134/+173
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: "Several Linux PV device frontends are using the grant table interfaces for removing access rights of the backends in ways being subject to race conditions, resulting in potential data leaks, data corruption by malicious backends, and denial of service triggered by malicious backends: - blkfront, netfront, scsifront and the gntalloc driver are testing whether a grant reference is still in use. If this is not the case, they assume that a following removal of the granted access will always succeed, which is not true in case the backend has mapped the granted page between those two operations. As a result the backend can keep access to the memory page of the guest no matter how the page will be used after the frontend I/O has finished. The xenbus driver has a similar problem, as it doesn't check the success of removing the granted access of a shared ring buffer. - blkfront, netfront, scsifront, usbfront, dmabuf, xenbus, 9p, kbdfront, and pvcalls are using a functionality to delay freeing a grant reference until it is no longer in use, but the freeing of the related data page is not synchronized with dropping the granted access. As a result the backend can keep access to the memory page even after it has been freed and then re-used for a different purpose. - netfront will fail a BUG_ON() assertion if it fails to revoke access in the rx path. This will result in a Denial of Service (DoS) situation of the guest which can be triggered by the backend" * tag 'xsa396-5.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/netfront: react properly to failing gnttab_end_foreign_access_ref() xen/gnttab: fix gnttab_end_foreign_access() without page specified xen/pvcalls: use alloc/free_pages_exact() xen/9p: use alloc/free_pages_exact() xen/usb: don't use gnttab_end_foreign_access() in xenhcd_gnttab_done() xen: remove gnttab_query_foreign_access() xen/gntalloc: don't use gnttab_query_foreign_access() xen/scsifront: don't use gnttab_query_foreign_access() for mapped status xen/netfront: don't use gnttab_query_foreign_access() for mapped status xen/blkfront: don't use gnttab_query_foreign_access() for mapped status xen/grant-table: add gnttab_try_end_foreign_access() xen/xenbus: don't let xenbus_grant_ring() remove grants in error case
2022-03-10net: dsa: tag_rtl8_4: fix typo in modalias nameLuiz Angelo Daros de Luca1-1/+1
DSA_TAG_PROTO_RTL8_4L is not defined. It should be DSA_TAG_PROTO_RTL8_4T. Fixes: cd87fecdedd7 ("net: dsa: tag_rtl8_4: add rtl8_4t trailing variant") Reported-by: Arınç ÜNAL <arinc.unal@arinc9.com> Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220309175641.12943-1-luizluca@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10Merge branch 'selftests-pmtu-sh-fix-cleanup-of-processes-launched-in-subshell'Jakub Kicinski1-4/+17
Guillaume Nault says: ==================== selftests: pmtu.sh: Fix cleanup of processes launched in subshell. Depending on the options used, pmtu.sh may launch tcpdump and nettest processes in the background. However it fails to clean them up after the tests complete. Patch 1 allows the cleanup() function to read the list of PIDs launched by the tests. Patch 2 fixes the way the nettest PIDs are retrieved. ==================== Link: https://lore.kernel.org/r/cover.1646776561.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10selftests: pmtu.sh: Kill nettest processes launched in subshell.Guillaume Nault1-2/+12
When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault1-2/+5
The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net: axienet: Use napi_alloc_skb when refilling RX ringRobert Hancock1-1/+1
Use napi_alloc_skb to allocate memory when refilling the RX ring in axienet_poll for more efficiency. napi_alloc_skb() can reuse softirq-local cache of freed skbs which may still be cache-warm and skipping allocator calls. Signed-off-by: Robert Hancock <robert.hancock@calian.com> Link: https://lore.kernel.org/r/20220308211013.1530955-1-robert.hancock@calian.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10tcp: adjust TSO packet sizes based on min_rttEric Dumazet5-13/+54
Back when tcp_tso_autosize() and TCP pacing were introduced, our focus was really to reduce burst sizes for long distance flows. The simple heuristic of using sk_pacing_rate/1024 has worked well, but can lead to too small packets for hosts in the same rack/cluster, when thousands of flows compete for the bottleneck. Neal Cardwell had the idea of making the TSO burst size a function of both sk_pacing_rate and tcp_min_rtt() Indeed, for local flows, sending bigger bursts is better to reduce cpu costs, as occasional losses can be repaired quite fast. This patch is based on Neal Cardwell implementation done more than two years ago. bbr is adjusting max_pacing_rate based on measured bandwidth, while cubic would over estimate max_pacing_rate. /proc/sys/net/ipv4/tcp_tso_rtt_log can be used to tune or disable this new feature, in logarithmic steps. Tested: 100Gbit NIC, two hosts in the same rack, 4K MTU. 600 flows rate-limited to 20000000 bytes per second. Before patch: (TSO sizes would be limited to 20000000/1024/4096 -> 4 segments per TSO) ~# echo 0 >/proc/sys/net/ipv4/tcp_tso_rtt_log ~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered" 96005 Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000': 65,945.29 msec task-clock # 2.845 CPUs utilized 1,314,632 context-switches # 19935.279 M/sec 5,292 cpu-migrations # 80.249 M/sec 940,641 page-faults # 14264.023 M/sec 201,117,030,926 cycles # 3049769.216 GHz (83.45%) 17,699,435,405 stalled-cycles-frontend # 8.80% frontend cycles idle (83.48%) 136,584,015,071 stalled-cycles-backend # 67.91% backend cycles idle (83.44%) 53,809,530,436 instructions # 0.27 insn per cycle # 2.54 stalled cycles per insn (83.36%) 9,062,315,523 branches # 137422329.563 M/sec (83.22%) 153,008,621 branch-misses # 1.69% of all branches (83.32%) 23.182970846 seconds time elapsed TcpInSegs 15648792 0.0 TcpOutSegs 58659110 0.0 # Average of 3.7 4K segments per TSO packet TcpExtTCPDelivered 58654791 0.0 TcpExtTCPDeliveredCE 19 0.0 After patch: ~# echo 9 >/proc/sys/net/ipv4/tcp_tso_rtt_log ~# nstat -n;perf stat ./super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000;nstat|egrep "TcpInSegs|TcpOutSegs|TcpRetransSegs|Delivered" 96046 Performance counter stats for './super_netperf 600 -H otrv6 -l 20 -- -K dctcp -q 20000000': 48,982.58 msec task-clock # 2.104 CPUs utilized 186,014 context-switches # 3797.599 M/sec 3,109 cpu-migrations # 63.472 M/sec 941,180 page-faults # 19214.814 M/sec 153,459,763,868 cycles # 3132982.807 GHz (83.56%) 12,069,861,356 stalled-cycles-frontend # 7.87% frontend cycles idle (83.32%) 120,485,917,953 stalled-cycles-backend # 78.51% backend cycles idle (83.24%) 36,803,672,106 instructions # 0.24 insn per cycle # 3.27 stalled cycles per insn (83.18%) 5,947,266,275 branches # 121417383.427 M/sec (83.64%) 87,984,616 branch-misses # 1.48% of all branches (83.43%) 23.281200256 seconds time elapsed TcpInSegs 1434706 0.0 TcpOutSegs 58883378 0.0 # Average of 41 4K segments per TSO packet TcpExtTCPDelivered 58878971 0.0 TcpExtTCPDeliveredCE 9664 0.0 Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Neal Cardwell <ncardwell@google.com> Link: https://lore.kernel.org/r/20220309015757.2532973-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10tcp: autocork: take MSG_EOR hint into considerationEric Dumazet1-1/+2
tcp_should_autocork() is evaluating if it makes senses to not immediately send current skb, hoping that user space will add more payload on it by the time TCP stack reacts to upcoming TX completions. If current skb got MSG_EOR mark, then we know that no further data will be added, it is therefore futile to wait. SOF_TIMESTAMPING_TX_ACK will become a bit more accurate, if prior packets are still in qdisc/device queues. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Link: https://lore.kernel.org/r/20220309054706.2857266-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10stmmac: intel: Add ADL-N PCI IDMichael Sit Wei Hong1-0/+2
Add PCI ID for Ethernet TSN Controller on ADL-N. Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com> Link: https://lore.kernel.org/r/20220309033415.3370250-1-michael.wei.hong.sit@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-10net/smc: fix -Wmissing-prototypes warning when CONFIG_SYSCTL not setDust Li1-2/+2
when CONFIG_SYSCTL not set, smc_sysctl_net_init/exit need to be static inline to avoid missing-prototypes if compile with W=1. Since __net_exit has noinline annotation when CONFIG_NET_NS not set, it should not be used with static inline. So remove the __net_init/exit when CONFIG_SYSCTL not set. Fixes: 7de8eb0d9039 ("net/smc: fix compile warning for smc_sysctl") Signed-off-by: Dust Li <dust.li@linux.alibaba.com> Link: https://lore.kernel.org/r/20220309033051.41893-1-dust.li@linux.alibaba.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 19:03:05 +0300