summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-08-23selftests/nolibc: vfprintf: remove MEMFD_CREATE dependencyZhangjin Wu1-3/+3
The vfprintf test case require to open a temporary file to write, the old memfd_create() method is perfect but has strong dependency on MEMFD_CREATE and also TMPFS or HUGETLBFS (see fs/Kconfig): config MEMFD_CREATE def_bool TMPFS || HUGETLBFS And from v6.2, MFD_NOEXEC_SEAL must be passed for the non-executable memfd, otherwise, The kernel warning will be output to the test result like this: Running test 'vfprintf' 0 emptymemfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=1 'init' "" = "" [OK] To avoid such warning and also to remove the MEMFD_CREATE dependency, let's open a file from tmpfs directly. The /tmp directory is used to detect the existing of tmpfs, if not there, skip instead of fail. And further, for pid == 1, the initramfs is loaded as ramfs, which can be used as tmpfs, so, it is able to further remove TMPFS dependency too. Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/9ad51430-b7c0-47dc-80af-20c86539498d@t-8ch.de Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: prepare /tmp for tests that need to writeZhangjin Wu1-0/+3
create a /tmp directory. If it succeeds, the directory is writable, which is normally the case when booted from an initramfs anyway. This will be used instead of procfs for some tests. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Link: https://lore.kernel.org/lkml/20230710050600.9697-1-falcon@tinylab.org/ [wt: removed the unneeded mount() call] Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: fix up failures when CONFIG_PROC_FS=nZhangjin Wu1-2/+5
For CONFIG_PROC_FS=n, the /proc is not mountable, but the /proc directory has been created in the prepare() stage whenever /proc is there or not. so, the checking of /proc in the run_syscall() stage will be always true and at last it will fail all of the procfs dependent test cases, which deviates from the 'cond' check design of the EXPECT_xx macros, without procfs, these test cases should be skipped instead of failed. To solve this issue, one method is checking /proc/self instead of /proc, another method is removing the /proc directory completely for CONFIG_PROC_FS=n, we apply the second method to avoid misleading the users. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add a new rmdir() test caseZhangjin Wu1-0/+1
A new rmdir_blah test case is added to remove a non-existing /blah, which expects failure with ENOENT errno. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: add rmdir() supportZhangjin Wu1-0/+22
a reverse operation of mkdir() is meaningful, add rmdir() here. required by nolibc-test to remove /proc while CONFIG_PROC_FS is not enabled. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: link_cross: use /proc/self/cmdlineZhangjin Wu1-1/+1
For CONFIG_NET=n, there would be no /proc/self/net, so, use /proc/self/cmdline instead. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: fix up kernel parameters supportZhangjin Wu1-2/+31
kernel parameters allow pass two types of strings, one type is like 'noapic', another type is like 'panic=5', the first type is passed as arguments of the init program, the second type is passed as environment variables of the init program. when users pass kernel parameters like this: noapic NOLIBC_TEST=syscall our nolibc-test program will use the test setting from argv[1] and ignore the one from NOLIBC_TEST environment variable, and at last, it will print the following line and ignore the whole test setting. Ignoring unknown test name 'noapic' reversing the parsing order does solve the above issue: test = getenv("NOLIBC_TEST"); if (test) test = argv[1]; but it still doesn't work with such kernel parameters (without NOLIBC_TEST environment variable): noapic FOO=bar To support all of the potential kernel parameters, let's verify the test setting from both of argv[1] and NOLIBC_TEST environment variable. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: prefer <sys/reboot.h> to <linux/reboot.h>Zhangjin Wu1-2/+1
Since both glibc and musl provide RB_ flags via <sys/reboot.h>, and we just add RB_ flags for nolibc, let's use RB_ flags instead of LINUX_REBOOT_ flags and only reserve the required <sys/reboot.h> header. This allows compile libc-test for musl libc without the linux headers. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: types.h: add RB_ flags for reboot()Zhangjin Wu2-2/+11
Both glibc and musl provide RB_ flags via <sys/reboot.h> for reboot(), they don't need to include <linux/reboot.h>, let nolibc provide RB_ flags too. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: fix up int_fast16/32_t test cases for muslZhangjin Wu1-4/+8
musl limits the fast signed int in 32bit, but glibc and nolibc don't, to let such test cases work on musl, let's provide the type based SINT_MAX_OF_TYPE(type) and SINT_MIN_OF_TYPE(type). Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/bc635c4f-67fe-4e86-bfdf-bcb4879b928d@t-8ch.de/ Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add _LARGEFILE64_SOURCE for muslZhangjin Wu1-0/+1
_GNU_SOURCE Implies _LARGEFILE64_SOURCE in glibc, but in musl, the default configuration doesn't enable _LARGEFILE64_SOURCE. >From include/dirent.h of musl, getdents64 is provided as getdents when _LARGEFILE64_SOURCE is defined. #if defined(_LARGEFILE64_SOURCE) ... #define getdents64 getdents #endif Let's define _LARGEFILE64_SOURCE to fix up this compile error: tools/testing/selftests/nolibc/nolibc-test.c: In function ‘test_getdents64’: tools/testing/selftests/nolibc/nolibc-test.c:453:8: warning: implicit declaration of function ‘getdents64’; did you mean ‘getdents’? [-Wimplicit-function-declaration] 453 | ret = getdents64(fd, (void *)buffer, sizeof(buffer)); | ^~~~~~~~~~ | getdents /usr/bin/ld: /tmp/ccKILm5u.o: in function `test_getdents64': nolibc-test.c:(.text+0xe3e): undefined reference to `getdents64' collect2: error: ld returned 1 exit status Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: gettid: restore for glibc and muslZhangjin Wu1-3/+7
As the gettid manpage [1] shows, glibc 2.30 has gettid support, so, let's enable the test for glibc >= 2.30. gettid works on musl too. [1]: https://man7.org/linux/man-pages/man2/gettid.2.html Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: stat_fault: silence NULL argument warning with glibcZhangjin Wu1-1/+1
Use another invalid address (void *)1 instead of NULL to silence this compile warning with glibc: $ make libc-test CC libc-test nolibc-test.c: In function ‘run_syscall’: nolibc-test.c:622:49: warning: null argument where non-null required (argument 1) [-Wnonnull] 622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break; | ^~~~ nolibc-test.c:304:79: note: in definition of macro ‘EXPECT_SYSER2’ 304 | do { if (!cond) pad_spc(llen, 64, "[SKIPPED]\n"); else ret += expect_syserr2(expr, expret, experr1, experr2, llen); } while (0) | ^~~~ nolibc-test.c:622:33: note: in expansion of macro ‘EXPECT_SYSER’ 622 | CASE_TEST(stat_fault); EXPECT_SYSER(1, stat(NULL, &stat_buf), -1, EFAULT); break; Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add run-libc-test targetZhangjin Wu1-0/+4
allow run and report glibc or musl based libc-test. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add mmap_munmap_good test caseZhangjin Wu1-0/+60
mmap() a file with a good offset and then munmap() it. a non-zero offset is passed to test the 6th argument of my_syscall6(). Note, it is not easy to find a unique file for mmap() in different scenes, so, a file list is used to search the right one: - /dev/zero: is commonly used to allocate anonymous memory and is likely present and readable - /proc/1/exe: for 'run' and 'run-user' target, 'run-user' can not find '/proc/self/exe' - /proc/self/exe: for 'libc-test' target, normal program 'libc-test' has no permission to access '/proc/1/exe' - argv0: the path of the program itself, let it pass even with worst case scene: no procfs and no /dev/zero Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/20230702193306.GK16233@1wt.eu/ Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/lkml/bff82ea6-610b-4471-a28b-6c76c28604a6@t-8ch.de/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add munmap_bad test caseZhangjin Wu1-0/+1
The addr argument of munmap() must be a multiple of the page size, passing invalid (void *)1 addr expects failure with -EINVAL. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add mmap_bad test caseZhangjin Wu1-0/+1
The length argument of mmap() must be greater than 0, passing a zero length argument expects failure with -EINVAL. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add sbrk_0 to test current brk gettingZhangjin Wu1-0/+1
>From musl 0.9.14 (to the latest version 1.2.3), both sbrk() and brk() have almost been disabled for they conflict with malloc, only sbrk(0) is still permitted as a way to get the current location of the program break, let's support such case. EXPECT_PTRNE() is used to expect sbrk() always successfully getting the current break. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: add EXPECT_PTREQ, EXPECT_PTRNE and EXPECT_PTRERZhangjin Wu1-0/+58
The syscalls like sbrk() and mmap() return pointers, to test them, more pointer compare test macros are required, add them: - EXPECT_PTREQ() expects two equal pointers. - EXPECT_PTRNE() expects two non-equal pointers. - EXPECT_PTRER() expects failure with a specified errno. - EXPECT_PTRER2() expects failure with one of two specified errnos. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: prepare: create /dev/zeroZhangjin Wu1-1/+3
/dev/zero is commonly used to allocate anonymous memory, it is a very good file for tests, let's prepare it. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/20230702193306.GK16233@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: export argv0 for some testsZhangjin Wu1-0/+4
argv0 is the path to nolibc-test program itself, which is a very good always existing readable file for some tests, let's export it. Note, the path may be absolute or relative, please make sure the tests work with both of them. If it is relative, we must make sure the current path is the one specified by the PWD environment variable. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZKKbS3cwKcHgnGwu@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: clean up sbrk() routineZhangjin Wu1-5/+4
Fix up the error reported by scripts/checkpatch.pl: ERROR: do not use assignment in if condition #95: FILE: tools/include/nolibc/sys.h:95: + if ((ret = sys_brk(0)) && (sys_brk(ret + inc) == ret + inc)) Apply the new generic __sysret() to merge the SET_ERRNO() and return lines. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: clean up mmap() routineZhangjin Wu2-23/+12
Do several cleanups together: - Since all supported architectures have my_syscall6() now, remove the #ifdef check. - Move the mmap() related macros to tools/include/nolibc/types.h and reuse most of them from <linux/mman.h> - Apply the new generic __sysret() to convert the calling of sys_map() to oneline code Note, since MAP_FAILED is -1 on Linux, so we can use the generic __sysret() which returns -1 upon error and still satisfy user land that checks for MAP_FAILED. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/20230702192347.GJ16233@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: __sysret: support syscalls who return a pointerZhangjin Wu1-5/+12
No official reference states the errno range, here aligns with musl and glibc and uses [-MAX_ERRNO, -1] instead of all negative ones. - musl: src/internal/syscall_ret.c - glibc: sysdeps/unix/sysv/linux/sysdep.h The MAX_ERRNO used by musl and glibc is 4095, just like the one nolibc defined in tools/include/nolibc/errno.h. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZKKdD%2Fp4UkEavru6@1wt.eu/ Suggested-by: David Laight <David.Laight@ACULAB.COM> Link: https://lore.kernel.org/linux-riscv/94dd5170929f454fbc0a10a2eb3b108d@AcuMS.aculab.com/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: add missing my_syscall6() for mipsZhangjin Wu2-6/+30
It is able to pass the 6th argument like the 5th argument via the stack for mips, let's add a new my_syscall6() now, see [1] for details: The mips/o32 system call convention passes arguments 5 through 8 on the user stack. Both mmap() and pselect6() require my_syscall6(). [1]: https://man7.org/linux/man-pages/man2/syscall.2.html Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: arch-mips.h: shrink with _NOLIBC_SYSCALL_CLOBBERLISTZhangjin Wu1-12/+10
my_syscall<N> share the same long clobber list, define a macro for them. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: arch-loongarch.h: shrink with _NOLIBC_SYSCALL_CLOBBERLISTZhangjin Wu1-14/+9
my_syscall<N> share the same long clobber list, define a macro for them. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23toolc/nolibc: arch-*.h: clean up whitespaces after __asm__Zhangjin Wu8-54/+54
replace "__asm__ volatile" with "__asm__ volatile" and insert necessary whitespace before "\" to make sure the lines are aligned. $ sed -i -e 's/__asm__ volatile ( /__asm__ volatile ( /g' tools/include/nolibc/*.h Note, arch-s390.h uses post-tab instead of post-whitespaces, must avoid insert whitespace just before the tabs: $ sed -i -e 's/__asm__ volatile (\t/__asm__ volatile (\t/g' tools/include/nolibc/arch-*.h Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23tools/nolibc: arch-*.h: fix up code indent errorsZhangjin Wu5-39/+39
More than 8 whitespaces of the code indent are replaced with "tab + whitespaces" to fix up such errors reported by scripts/checkpatch.pl: ERROR: code indent should use tabs where possible #64: FILE: tools/include/nolibc/arch-mips.h:64: +^I \$ ERROR: code indent should use tabs where possible #72: FILE: tools/include/nolibc/arch-mips.h:72: +^I "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" \$ This command is used: $ sed -i -e '/^\t* /{s/ /\t/g}' tools/include/nolibc/arch-*.h Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-23selftests/nolibc: simplify call to iopermThomas Weißschuh1-5/+1
Since commit 53fcfafa8c5c ("tools/nolibc/unistd: add syscall()") nolibc has support for syscall(2). Use it to get rid of some ifdef-ery. Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: unistd.h: reorder the syscall macrosZhangjin Wu1-2/+2
Tune the macros in the using order and align most of them. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: sys.h: apply __sysret() helperZhangjin Wu1-310/+44
Use __sysret() to shrink most of the library routines to oneline code. Removed 266 lines of duplicated code. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: unistd.h: apply __sysret() helperZhangjin Wu1-10/+1
Use __sysret() to shrink the whole _syscall() to oneline code. Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: sys.h: add a syscall return helperZhangjin Wu1-0/+10
Most of the library routines share the same syscall return logic: In general, a 0 return value indicates success. A -1 return value indicates an error, and an error number is stored in errno. [1] Let's add a __sysret() helper for the above logic to simplify the coding and shrink the code lines too. Thomas suggested to use inline function instead of macro for __sysret(). Willy suggested to make __sysret() be always inline. [1]: https://man7.org/linux/man-pages/man2/syscall.2.html Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/linux-riscv/ZH1+hkhiA2+ItSvX@1wt.eu/ Suggested-by: Thomas Weißschuh <linux@weissschuh.net> Link: https://lore.kernel.org/linux-riscv/ea4e7442-7223-4211-ba29-70821e907888@t-8ch.de/ Reviewed-by: Thomas Weißschuh <linux@weissschuh.net> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: fix up undeclared syscall macros with #ifdef and -ENOSYSZhangjin Wu1-0/+12
Compiling nolibc for rv32 got such errors: nolibc/sysroot/riscv/include/sys.h: In function ‘sys_gettimeofday’: nolibc/sysroot/riscv/include/sys.h:557:21: error: ‘__NR_gettimeofday’ undeclared (first use in this function); did you mean ‘sys_gettimeofday’? 557 | return my_syscall2(__NR_gettimeofday, tv, tz); | ^~~~~~~~~~~~~~~~~ nolibc/sysroot/riscv/include/sys.h: In function ‘sys_lseek’: nolibc/sysroot/riscv/include/sys.h:675:21: error: ‘__NR_lseek’ undeclared (first use in this function) 675 | return my_syscall3(__NR_lseek, fd, offset, whence); | ^~~~~~~~~~ nolibc/sysroot/riscv/include/sys.h: In function ‘sys_wait4’: nolibc/sysroot/riscv/include/sys.h:1341:21: error: ‘__NR_wait4’ undeclared (first use in this function) 1341 | return my_syscall4(__NR_wait4, pid, status, options, rusage); If a syscall macro is not supported by a target platform, wrap it with '#ifdef' and 'return -ENOSYS' for the '#else' branch, which lets the other syscalls work as-is and allows developers to fix up the test failures reported by nolibc-test one by one later. This wraps all of the failed syscall macros with '#ifdef' and 'return -ENOSYS' for the '#else' branch, so, all of the undeclared failures are fixed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06tools/nolibc: fix up #error compile failures with -ENOSYSZhangjin Wu1-13/+13
Compiling nolibc for rv32 got such errors: In file included from nolibc/sysroot/riscv/include/nolibc.h:99, from nolibc/sysroot/riscv/include/errno.h:26, from nolibc/sysroot/riscv/include/stdio.h:14, from tools/testing/selftests/nolibc/nolibc-test.c:12: nolibc/sysroot/riscv/include/sys.h:946:2: error: #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll() 946 | #error Neither __NR_ppoll nor __NR_poll defined, cannot implement sys_poll() | ^~~~~ nolibc/sysroot/riscv/include/sys.h:1062:2: error: #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select() 1062 | #error None of __NR_select, __NR_pselect6, nor __NR__newselect defined, cannot implement sys_select() If a syscall is not supported by a target platform, 'return -ENOSYS' is better than '#error', which lets the other syscalls work as-is and allows developers to fix up the test failures reported by nolibc-test one by one later. This converts all of the '#error' to 'return -ENOSYS', so, all of the '#error' failures are fixed. Suggested-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/linux-riscv/5e7d2adf-e96f-41ca-a4c6-5c87a25d4c9c@app.fastmail.com/ Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06selftests/nolibc: restore the failed tests printZhangjin Wu1-1/+1
The commit fa0df56a804b ("selftests/nolibc: also count skipped and failed tests in output") added counting for the skipped and failed tests, but also removed the 'FAIL' results print, let's restore it for it really allow users to learn the failed details without opening the log file. Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06selftests/nolibc: always print the path to test log fileZhangjin Wu1-2/+2
Even when there is no failure, developers may be still interested in the test log file, especially, string alignment, duplicated print, kernel message and so forth, so, always print the path to test log file. A new line is added for such a print to avoid annoying people who don't care about it when the test pass completely. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-08-06selftests/nolibc: add a standalone test report macroZhangjin Wu1-12/+7
The run-user, run and rerun targets use the same test report script, let's add a standalone test report macro for them. This shrinks code lines and simplify the future maintainability. Suggested-by: Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/lkml/ZIB792FtG6ibOudp@1wt.eu/ Signed-off-by: Zhangjin Wu <falcon@tinylab.org> Signed-off-by: Willy Tarreau <w@1wt.eu>
2023-07-09Linux 6.5-rc1Linus Torvalds1-2/+2
2023-07-09MAINTAINERS 2: Electric BoogalooLinus Torvalds1-46/+46
We just sorted the entries and fields last release, so just out of a perverse sense of curiosity, I decided to see if we can keep things ordered for even just one release. The answer is "No. No we cannot". I suggest that all kernel developers will need weekly training sessions, involving a lot of Big Bird and Sesame Street. And at the yearly maintainer summit, we will all sing the alphabet song together. I doubt I will keep doing this. At some point "perverse sense of curiosity" turns into just a cold dark place filled with sadness and despair. Repeats: 80e62bc8487b ("MAINTAINERS: re-sort all entries and fields") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2023-07-09Merge tag 'dma-mapping-6.5-2023-07-09' of ↵Linus Torvalds1-11/+35
git://git.infradead.org/users/hch/dma-mapping Pull dma-mapping fixes from Christoph Hellwig: - swiotlb area sizing fixes (Petr Tesarik) * tag 'dma-mapping-6.5-2023-07-09' of git://git.infradead.org/users/hch/dma-mapping: swiotlb: reduce the number of areas to match actual memory pool size swiotlb: always set the number of areas before allocating the pool
2023-07-09Merge tag 'irq_urgent_for_v6.5_rc1' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq update from Borislav Petkov: - Optimize IRQ domain's name assignment * tag 'irq_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Use return value of strreplace()
2023-07-09Merge tag 'x86_urgent_for_v6.5_rc1' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fpu fix from Borislav Petkov: - Do FPU AP initialization on Xen PV too which got missed by the recent boot reordering work * tag 'x86_urgent_for_v6.5_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/xen: Fix secondary processors' FPU initialization
2023-07-09Merge tag 'x86-core-2023-07-09' of ↵Linus Torvalds1-0/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for the mechanism to park CPUs with an INIT IPI. On shutdown or kexec, the kernel tries to park the non-boot CPUs with an INIT IPI. But the same code path is also used by the crash utility. If the CPU which panics is not the boot CPU then it sends an INIT IPI to the boot CPU which resets the machine. Prevent this by validating that the CPU which runs the stop mechanism is the boot CPU. If not, leave the other CPUs in HLT" * tag 'x86-core-2023-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Don't send INIT to boot CPU
2023-07-09Merge tag 'mips_6.5_1' of ↵Linus Torvalds10-53/+46
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fixes for KVM - fix for loongson build and cpu probing - DT fixes * tag 'mips_6.5_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: kvm: Fix build error with KVM_MIPS_DEBUG_COP0_COUNTERS enabled MIPS: dts: add missing space before { MIPS: Loongson: Fix build error when make modules_install MIPS: KVM: Fix NULL pointer dereference MIPS: Loongson: Fix cpu_probe_loongson() again
2023-07-09Merge tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds1-1/+1
Pull xfs fix from Darrick Wong: "Nothing exciting here, just getting rid of a gcc warning that I got tired of seeing when I turn on gcov" * tag 'xfs-6.5-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: fix uninit warning in xfs_growfs_data
2023-07-09Merge tag '6.5-rc-smb3-client-fixes-part2' of ↵Linus Torvalds4-5/+72
git://git.samba.org/sfrench/cifs-2.6 Pull more smb client updates from Steve French: - fix potential use after free in unmount - minor cleanup - add worker to cleanup stale directory leases * tag '6.5-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: cifs: Add a laundromat thread for cached directories smb: client: remove redundant pointer 'server' cifs: fix session state transition to avoid use-after-free issue
2023-07-09Merge tag 'ntb-6.5' of https://github.com/jonmason/ntbLinus Torvalds10-33/+36
Pull NTB updates from Jon Mason: "Fixes for pci_clean_master, error handling in driver inits, and various other issues/bugs" * tag 'ntb-6.5' of https://github.com/jonmason/ntb: ntb: hw: amd: Fix debugfs_create_dir error checking ntb.rst: Fix copy and paste error ntb_netdev: Fix module_init problem ntb: intel: Remove redundant pci_clear_master ntb: epf: Remove redundant pci_clear_master ntb_hw_amd: Remove redundant pci_clear_master ntb: idt: drop redundant pci_enable_pcie_error_reporting() MAINTAINERS: git://github -> https://github.com for jonmason NTB: EPF: fix possible memory leak in pci_vntb_probe() NTB: ntb_tool: Add check for devm_kcalloc NTB: ntb_transport: fix possible memory leak while device_register() fails ntb: intel: Fix error handling in intel_ntb_pci_driver_init() NTB: amd: Fix error handling in amd_ntb_pci_driver_init() ntb: idt: Fix error handling in idt_pci_driver_init()
2023-07-09mm: lock newly mapped VMA with corrected orderingHugh Dickins1-2/+2
Lockdep is certainly right to complain about (&vma->vm_lock->lock){++++}-{3:3}, at: vma_start_write+0x2d/0x3f but task is already holding lock: (&mapping->i_mmap_rwsem){+.+.}-{3:3}, at: mmap_region+0x4dc/0x6db Invert those to the usual ordering. Fixes: 33313a747e81 ("mm: lock newly mapped VMA which can be modified after it becomes visible") Cc: stable@vger.kernel.org Signed-off-by: Hugh Dickins <hughd@google.com> Tested-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 23:59:31 +0300