summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-30phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRPTony Lindgren1-2/+2
If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy") Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20240128120556.8848-1-tony@atomide.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: lan966x: Add missing serdes mux entryHoratiu Vultur1-0/+2
According to the datasheet(Table 3-2: Port configuration) the serdes 2 (SD2) can be configured to run QSGMII or SGMII mode. Already the QSGMII mode is supported in the serdes_muxes list but was missing the SGMII mode. In this mode the serdes is connected to the port 4. Therefore add this entry in the list. Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com> Link: https://lore.kernel.org/r/20240108205140.1701770-1-horatiu.vultur@microchip.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: renesas: rcar-gen3-usb2: Fix returning wrong error codeYoshihiro Shimoda1-4/+0
Even if device_create_file() returns error code, rcar_gen3_phy_usb2_probe() will return zero because the "ret" is variable shadowing. Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202312161021.gOLDl48K-lkp@intel.com/ Fixes: 441a681b8843 ("phy: rcar-gen3-usb2: fix implementation for runtime PM") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20240105093703.3359949-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: qcom-qmp-usb: fix serdes init sequence for IPQ6018Mantas Pucka1-1/+19
Commit 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") noted that IPQ6018 init is identical to IPQ8074. Yet downstream uses separate serdes init sequence for IPQ6018. Since already existing IPQ9574 serdes init sequence is identical, just reuse it and fix failing USB3 mode in IPQ6018. Fixes: 23fd679249df ("phy: qcom-qmp: add USB3 PHY support for IPQ6018") Signed-off-by: Mantas Pucka <mantas@8devices.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1706026160-17520-3-git-send-email-mantas@8devices.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-24phy: qcom-qmp-usb: fix register offsets for ipq8074/ipq6018Mantas Pucka1-1/+9
Commit 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") introduced register offsets to the driver but for ipq8074/ipq6018 they do not match what was in the old style device tree. Example from old ipq6018.dtsi: <0x00078200 0x130>, /* Tx */ <0x00078400 0x200>, /* Rx */ <0x00078800 0x1f8>, /* PCS */ <0x00078600 0x044>; /* PCS misc */ which would translate to: {.., .pcs = 0x800, .pcs_misc = 0x600, .tx = 0x200, .rx = 0x400 } but was translated to: {.., .pcs = 0x600, .tx = 0x200, .rx = 0x400 } So split usb_offsets and fix USB initialization for IPQ8074 and IPQ6018. Tested only on IPQ6018 Fixes: 2be22aae6b18 ("phy: qcom-qmp-usb: populate offsets configuration") Signed-off-by: Mantas Pucka <mantas@8devices.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/1706026160-17520-2-git-send-email-mantas@8devices.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-22Linux 6.8-rc1Linus Torvalds1-2/+2
2024-01-22Merge tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefsLinus Torvalds78-1426/+1629
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ...
2024-01-21Merge tag 'timers-core-2024-01-21' of ↵Linus Torvalds7-12/+41
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs
2024-01-21Merge tag 'powerpc-6.8-2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
2024-01-21bcachefs: Improve inode_to_text()Kent Overstreet1-7/+18
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: logged_ops_format.hKent Overstreet2-27/+31
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: reflink_format.hKent Overstreet3-47/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; extents_format.hKent Overstreet2-279/+284
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: ec_format.hKent Overstreet2-16/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: subvolume_format.hKent Overstreet2-32/+36
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: snapshot_format.hKent Overstreet2-33/+37
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: alloc_background_format.hKent Overstreet2-93/+94
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: xattr_format.hKent Overstreet2-15/+20
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: dirent_format.hKent Overstreet2-39/+43
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: inode_format.hKent Overstreet2-164/+167
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs; quota_format.hKent Overstreet2-42/+48
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: sb-counters_format.hKent Overstreet2-95/+100
bcachefs_format.h has gotten too big; let's do some organizing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: counters.c -> sb-counters.cKent Overstreet5-8/+7
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: comment bch_subvolumeKent Overstreet1-0/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_snapshot::btimeKent Overstreet2-0/+3
Add a field to bch_snapshot for creation time; this will be important when we start exposing the snapshot tree to userspace. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: add missing __GFP_NOWARNKent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: opts->compression can now also be applied in the backgroundKent Overstreet11-23/+24
The "apply this compression method in the background" paths now use the compression option if background_compression is not set; this means that setting or changing the compression option will cause existing data to be compressed accordingly in the background. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Prep work for variable size btree node buffersKent Overstreet18-97/+87
bcachefs btree nodes are big - typically 256k - and btree roots are pinned in memory. As we're now up to 18 btrees, we now have significant memory overhead in mostly empty btree roots. And in the future we're going to start enforcing that certain btree node boundaries exist, to solve lock contention issues - analagous to XFS's AGIs. Thus, we need to start allocating smaller btree node buffers when we can. This patch changes code that refers to the filesystem constant c->opts.btree_node_size to refer to the btree node buffer size - btree_buf_bytes() - where appropriate. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: grab s_umount only if snapshottingSu Yue1-6/+5
When I was testing mongodb over bcachefs with compression, there is a lockdep warning when snapshotting mongodb data volume. $ cat test.sh prog=bcachefs $prog subvolume create /mnt/data $prog subvolume create /mnt/data/snapshots while true;do $prog subvolume snapshot /mnt/data /mnt/data/snapshots/$(date +%s) sleep 1s done $ cat /etc/mongodb.conf systemLog: destination: file logAppend: true path: /mnt/data/mongod.log storage: dbPath: /mnt/data/ lockdep reports: [ 3437.452330] ====================================================== [ 3437.452750] WARNING: possible circular locking dependency detected [ 3437.453168] 6.7.0-rc7-custom+ #85 Tainted: G E [ 3437.453562] ------------------------------------------------------ [ 3437.453981] bcachefs/35533 is trying to acquire lock: [ 3437.454325] ffffa0a02b2b1418 (sb_writers#10){.+.+}-{0:0}, at: filename_create+0x62/0x190 [ 3437.454875] but task is already holding lock: [ 3437.455268] ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.456009] which lock already depends on the new lock. [ 3437.456553] the existing dependency chain (in reverse order) is: [ 3437.457054] -> #3 (&type->s_umount_key#48){.+.+}-{3:3}: [ 3437.457507] down_read+0x3e/0x170 [ 3437.457772] bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.458206] __x64_sys_ioctl+0x93/0xd0 [ 3437.458498] do_syscall_64+0x42/0xf0 [ 3437.458779] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.459155] -> #2 (&c->snapshot_create_lock){++++}-{3:3}: [ 3437.459615] down_read+0x3e/0x170 [ 3437.459878] bch2_truncate+0x82/0x110 [bcachefs] [ 3437.460276] bchfs_truncate+0x254/0x3c0 [bcachefs] [ 3437.460686] notify_change+0x1f1/0x4a0 [ 3437.461283] do_truncate+0x7f/0xd0 [ 3437.461555] path_openat+0xa57/0xce0 [ 3437.461836] do_filp_open+0xb4/0x160 [ 3437.462116] do_sys_openat2+0x91/0xc0 [ 3437.462402] __x64_sys_openat+0x53/0xa0 [ 3437.462701] do_syscall_64+0x42/0xf0 [ 3437.462982] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.463359] -> #1 (&sb->s_type->i_mutex_key#15){+.+.}-{3:3}: [ 3437.463843] down_write+0x3b/0xc0 [ 3437.464223] bch2_write_iter+0x5b/0xcc0 [bcachefs] [ 3437.464493] vfs_write+0x21b/0x4c0 [ 3437.464653] ksys_write+0x69/0xf0 [ 3437.464839] do_syscall_64+0x42/0xf0 [ 3437.465009] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.465231] -> #0 (sb_writers#10){.+.+}-{0:0}: [ 3437.465471] __lock_acquire+0x1455/0x21b0 [ 3437.465656] lock_acquire+0xc6/0x2b0 [ 3437.465822] mnt_want_write+0x46/0x1a0 [ 3437.465996] filename_create+0x62/0x190 [ 3437.466175] user_path_create+0x2d/0x50 [ 3437.466352] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.466617] __x64_sys_ioctl+0x93/0xd0 [ 3437.466791] do_syscall_64+0x42/0xf0 [ 3437.466957] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.467180] other info that might help us debug this: [ 3437.469670] 2 locks held by bcachefs/35533: other info that might help us debug this: [ 3437.467507] Chain exists of: sb_writers#10 --> &c->snapshot_create_lock --> &type->s_umount_key#48 [ 3437.467979] Possible unsafe locking scenario: [ 3437.468223] CPU0 CPU1 [ 3437.468405] ---- ---- [ 3437.468585] rlock(&type->s_umount_key#48); [ 3437.468758] lock(&c->snapshot_create_lock); [ 3437.469030] lock(&type->s_umount_key#48); [ 3437.469291] rlock(sb_writers#10); [ 3437.469434] *** DEADLOCK *** [ 3437.469670] 2 locks held by bcachefs/35533: [ 3437.469838] #0: ffffa0a02ce00a88 (&c->snapshot_create_lock){++++}-{3:3}, at: bch2_fs_file_ioctl+0x1e3/0xc90 [bcachefs] [ 3437.470294] #1: ffffa0a02b2b10e0 (&type->s_umount_key#48){.+.+}-{3:3}, at: bch2_fs_file_ioctl+0x232/0xc90 [bcachefs] [ 3437.470744] stack backtrace: [ 3437.470922] CPU: 7 PID: 35533 Comm: bcachefs Kdump: loaded Tainted: G E 6.7.0-rc7-custom+ #85 [ 3437.471313] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 3437.471694] Call Trace: [ 3437.471795] <TASK> [ 3437.471884] dump_stack_lvl+0x57/0x90 [ 3437.472035] check_noncircular+0x132/0x150 [ 3437.472202] __lock_acquire+0x1455/0x21b0 [ 3437.472369] lock_acquire+0xc6/0x2b0 [ 3437.472518] ? filename_create+0x62/0x190 [ 3437.472683] ? lock_is_held_type+0x97/0x110 [ 3437.472856] mnt_want_write+0x46/0x1a0 [ 3437.473025] ? filename_create+0x62/0x190 [ 3437.473204] filename_create+0x62/0x190 [ 3437.473380] user_path_create+0x2d/0x50 [ 3437.473555] bch2_fs_file_ioctl+0x2ec/0xc90 [bcachefs] [ 3437.473819] ? lock_acquire+0xc6/0x2b0 [ 3437.474002] ? __fget_files+0x2a/0x190 [ 3437.474195] ? __fget_files+0xbc/0x190 [ 3437.474380] ? lock_release+0xc5/0x270 [ 3437.474567] ? __x64_sys_ioctl+0x93/0xd0 [ 3437.474764] ? __pfx_bch2_fs_file_ioctl+0x10/0x10 [bcachefs] [ 3437.475090] __x64_sys_ioctl+0x93/0xd0 [ 3437.475277] do_syscall_64+0x42/0xf0 [ 3437.475454] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 3437.475691] RIP: 0033:0x7f2743c313af ====================================================== In __bch2_ioctl_subvolume_create(), we grab s_umount unconditionally and unlock it at the end of the function. There is a comment "why do we need this lock?" about the lock coming from commit 42d237320e98 ("bcachefs: Snapshot creation, deletion") The reason is that __bch2_ioctl_subvolume_create() calls sync_inodes_sb() which enforce locked s_umount to writeback all dirty nodes before doing snapshot works. Fix it by read locking s_umount for snapshotting only and unlocking s_umount after sync_inodes_sb(). Signed-off-by: Su Yue <glass.su@suse.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: kvfree bch_fs::snapshots in bch2_fs_snapshots_exitSu Yue1-1/+1
bch_fs::snapshots is allocated by kvzalloc in __snapshot_t_mut. It should be freed by kvfree not kfree. Or umount will triger: [ 406.829178 ] BUG: unable to handle page fault for address: ffffe7b487148008 [ 406.830676 ] #PF: supervisor read access in kernel mode [ 406.831643 ] #PF: error_code(0x0000) - not-present page [ 406.832487 ] PGD 0 P4D 0 [ 406.832898 ] Oops: 0000 [#1] PREEMPT SMP PTI [ 406.833512 ] CPU: 2 PID: 1754 Comm: umount Kdump: loaded Tainted: G OE 6.7.0-rc7-custom+ #90 [ 406.834746 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014 [ 406.835796 ] RIP: 0010:kfree+0x62/0x140 [ 406.836197 ] Code: 80 48 01 d8 0f 82 e9 00 00 00 48 c7 c2 00 00 00 80 48 2b 15 78 9f 1f 01 48 01 d0 48 c1 e8 0c 48 c1 e0 06 48 03 05 56 9f 1f 01 <48> 8b 50 08 48 89 c7 f6 c2 01 0f 85 b0 00 00 00 66 90 48 8b 07 f6 [ 406.837810 ] RSP: 0018:ffffb9d641607e48 EFLAGS: 00010286 [ 406.838213 ] RAX: ffffe7b487148000 RBX: ffffb9d645200000 RCX: ffffb9d641607dc4 [ 406.838738 ] RDX: 000065bb00000000 RSI: ffffffffc0d88b84 RDI: ffffb9d645200000 [ 406.839217 ] RBP: ffff9a4625d00068 R08: 0000000000000001 R09: 0000000000000001 [ 406.839650 ] R10: 0000000000000001 R11: 000000000000001f R12: ffff9a4625d4da80 [ 406.840055 ] R13: ffff9a4625d00000 R14: ffffffffc0e2eb20 R15: 0000000000000000 [ 406.840451 ] FS: 00007f0a264ffb80(0000) GS:ffff9a4e2d500000(0000) knlGS:0000000000000000 [ 406.840851 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 406.841125 ] CR2: ffffe7b487148008 CR3: 000000018c4d2000 CR4: 00000000000006f0 [ 406.841464 ] Call Trace: [ 406.841583 ] <TASK> [ 406.841682 ] ? __die+0x1f/0x70 [ 406.841828 ] ? page_fault_oops+0x159/0x470 [ 406.842014 ] ? fixup_exception+0x22/0x310 [ 406.842198 ] ? exc_page_fault+0x1ed/0x200 [ 406.842382 ] ? asm_exc_page_fault+0x22/0x30 [ 406.842574 ] ? bch2_fs_release+0x54/0x280 [bcachefs] [ 406.842842 ] ? kfree+0x62/0x140 [ 406.842988 ] ? kfree+0x104/0x140 [ 406.843138 ] bch2_fs_release+0x54/0x280 [bcachefs] [ 406.843390 ] kobject_put+0xb7/0x170 [ 406.843552 ] deactivate_locked_super+0x2f/0xa0 [ 406.843756 ] cleanup_mnt+0xba/0x150 [ 406.843917 ] task_work_run+0x59/0xa0 [ 406.844083 ] exit_to_user_mode_prepare+0x197/0x1a0 [ 406.844302 ] syscall_exit_to_user_mode+0x16/0x40 [ 406.844510 ] do_syscall_64+0x4e/0xf0 [ 406.844675 ] entry_SYSCALL_64_after_hwframe+0x6e/0x76 [ 406.844907 ] RIP: 0033:0x7f0a2664e4fb Signed-off-by: Su Yue <glass.su@suse.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bios must be 512 byte alginedKent Overstreet1-0/+4
Fixes: 023f9ac9f70f bcachefs: Delete dio read alignment check Reported-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: remove redundant variable tmpColin Ian King1-3/+1
The variable tmp is being assigned a value but it isn't being read afterwards. The assignment is redundant and so tmp can be removed. Cleans up clang scan build warning: warning: Although the value stored to 'ret' is used in the enclosing expression, the value is never actually read from 'ret' [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve trace_trans_restart_relockKent Overstreet5-24/+44
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Fix excess transaction restarts in __bchfs_fallocate()Kent Overstreet4-16/+35
drop_locks_do() should not be used in a fastpath without first trying the do in nonblocking mode - the unlock and relock will cause excessive transaction restarts and potentially livelocking with other threads that are contending for the same locks. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: extents_to_bp_stateKent Overstreet1-48/+41
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bkey_and_val_eq()Kent Overstreet1-3/+8
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Better journal tracepointsKent Overstreet2-60/+79
Factor out bch2_journal_bufs_to_text(), and use it in the journal_entry_full() tracepoint; when we can't get a journal reservation we need to know the outstanding journal entry sizes to know if the problem is due to excessive flushing. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Print size of superblock with space allocatedKent Overstreet1-1/+3
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Avoid flushing the journal in the discard pathKent Overstreet1-19/+41
When issuing discards, we may need to flush the journal if there's too many buckets that can't be discarded until a journal flush. But the heuristic was bad; we should be comparing the number of buckets that need to flushes against the number of free buckets, not the number of buckets we saw. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Improve move_extent tracepointKent Overstreet5-7/+48
Also print out the data_opts, so that we can see what specifically is being done to an extent. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add missing bch2_moving_ctxt_flush_all()Kent Overstreet1-0/+1
This fixes a bug with rebalance IOs getting stuck with reads completed, but writes never being issued. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Re-add move_extent_write tracepointKent Overstreet2-23/+20
It appears this was accidentally deleted at some point - also, do a bit of cleanup. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_kthread_io_clock_wait() no longer sleeps until full amountKent Overstreet1-2/+2
Drop t he loop in bch2_kthread_io_clock_wait(): this allows the code that uses it to be woken up for other reasons, and fixes a bug where rebalance wouldn't wake up when a scan was requested. This raises the possibility of spurious wakeups, but callers should always be able to handle that reasonably well. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Add .val_to_text() for KEY_TYPE_cookieKent Overstreet1-0/+9
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: Don't pass memcmp() as a pointerKent Overstreet1-2/+8
Some (buggy!) compilers have issues with this. Fixes: https://github.com/koverstreet/bcachefs/issues/625 Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefsLinus Torvalds1-6/+6
Pull header fix from Kent Overstreet: "Just one small fixup for the RT build" * tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs: spinlock: Fix failing build for PREEMPT_RT
2024-01-21bcachefs: Reduce would_deadlock restartsKent Overstreet1-0/+7
We don't have to take locks in any particular ordering - we'll make forward progress just fine - but if we try to stick to an ordering, it can help to avoid excessive would_deadlock transaction restarts. This tweaks the reflink path to take extents btree locks in the right order. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_trans_account_disk_usage_change()Kent Overstreet3-29/+48
The disk space accounting rewrite is splitting out accounting for each replicas set - those are moving to btree keys, instead of percpu counters. This breaks bch2_trans_fs_usage_apply() up, splitting out the part we will still need. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch_fs_usage_baseKent Overstreet7-47/+45
Split out base filesystem usage into its own type; prep work for breaking up bch2_trans_fs_usage_apply(). Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-01-21bcachefs: bch2_prt_compression_type()Kent Overstreet5-6/+15
bounds checking helper, since compression types are extensible Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 17:36:59 +0300