| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The C#_EN_F in SHADOWCON register is updated per frame.
So it should be protected by fimd_shadow_protect_win().
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It's better to be checking whether triggerring in fimd_trigger function.
Also it will return if in triggerring on fimd_te_handler, then it can't
execute remain codes.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The exynos fimd provides video type selection bits from system register
but exynos3 series don't has it, so needs has_vtsel flag and we can
distinguish whether set video type selection bits.
Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
During system resume from suspend to RAM the Exynos DRM driver forced
CRTC mode thus turning display on (DPMS_ON). This lead to runtime resuming
of DSI which failed because whole LCD power domain was off and it was
not allowed to turn on because of system resume in progress.
Forcing mode should not be needed and removing it solves this particular
problem.
This necessary fix for following scenario reproduced on Exynos DRM:
1. Power domain is off before suspending the system.
2. System is suspended to RAM.
3. Resuming starts. The Exynos DRM driver resume callback is called.
4. The Exynos DRM driver calls drm_helper_resume_force_mode() which turns
on the screen by calling exynos_dsi_dpms with DRM_MODE_DPMS_ON.
5. The Exynos DSI driver calls pm_runtime_get. The driver runtime
resumes and this should turn LCD power domain on.
6. Unfortunately the domain cannot be turned on because system resume is
in progress and genpd->prepared_count is positive.
Steps to reproduce:
1. Add runtime PM to Exynos DSI driver.
2. Build Exynos DRM/FB without FRAMEBUFFER_CONSOLE.
3. Enable the connector and screen (e.g. with modeset-vsync).
4. echo 3 > /sys/devices/platform/exynos-drm/graphics/fb0/blank
5. echo mem > /sys/power/state
6. Resume.
[ 77.712469] PM: early resume of devices complete after 3.854 msecs
[ 77.712739] exynos-dsi 11c80000.dsi: pm_genpd_resume()
[ 77.712758] exynos4-fimc 11800000.fimc: pm_genpd_resume()
[ 77.712774] exynos4-fimc 11810000.fimc: pm_genpd_resume()
[ 77.712787] exynos-drm-fimc 11820000.fimc: pm_genpd_resume()
[ 77.712802] exynos-drm-fimc 11830000.fimc: pm_genpd_resume()
[ 77.712815] s5p-mipi-csis 11880000.csis: pm_genpd_resume()
[ 77.712829] s5p-mipi-csis 11890000.csis: pm_genpd_resume()
[ 77.712843] exynos-fimc-lite 12390000.fimc-lite: pm_genpd_resume()
[ 77.712856] exynos-fimc-lite 123a0000.fimc-lite: pm_genpd_resume()
[ 77.713788] exynos4-fb 11c00000.fimd: pm_genpd_resume()
[ 77.713912] wake disabled for irq 184
[ 77.713923] wake disabled for irq 185
[ 77.714082] wake disabled for irq 173
[ 77.715676] wake disabled for irq 176
[ 77.718540] exynos4-fb 11c00000.fimd: pm_genpd_runtime_resume()
[ 77.718567] exynos4-fb 11c00000.fimd: state restore latency exceeded, new value 1708 ns
[ 77.718636] exynos-dsi 11c80000.dsi: pm_genpd_runtime_resume()
[ 77.892366] exynos-dsi 11c80000.dsi: PLL failed to stabilize
[ 77.892377] exynos-dsi 11c80000.dsi: failed to configure DSI PLL
[ 78.192168] exynos-dsi 11c80000.dsi: timeout waiting for reset
[ 78.211578] exynos-dsi 11c80000.dsi: waiting for bus lanes timed out
[ 78.307173] exynos-dsi 11c80000.dsi: xfer timed out: d1 00 (null)
[ 78.307190] panel_s6e8aa0 11c80000.dsi.0: error -110 reading dcs seq(0xd1)
[ 78.307199] panel_s6e8aa0 11c80000.dsi.0: read id failed
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The command mode panel should draw image earlier than the display
on command execution to prevent showing garbage GRAM screen data.
So should set dsi->state as DSIM_STATE_ENABLED between calling
exynos_dsi_set_display_enable() and drm_panel_enable() to transmit
image data before executing display on command.
And moves the display on command execution routine from prepare()
to enable() in drm_panel_funcs also.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
For providing VBLANK information, drm_handle_vblank() should
be called properly, but it is blocked by wait_vsync_event
condition which is set by manager_ops->wait_for_vblank().
So moves it out from wait_vsync_event routine.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
|
|
The exynos_drm_crtc_dpms() waits until pended page flip
queue is empty, calls the drm_vblank_off() then calls
manager->ops->dpms() when mode is DRM_MODE_DPMS_OFF.
The fimd_dpms() is one of manager->ops->dpms()s and
finally calls fimd_window_suspend().
But there is no active window and vblank is already off
when it is called.
So addtional waiting vblank is not necessary any more.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Inki Dae <inki.dae@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch supports Exynos4415 SoC.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch supports Exynos4415 SoC.
Signed-off-by: YoungJun Cho <yj44.cho@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Now that we have moved to generic phy based bindings,
we don't need to have any code related to older dptx-phy.
Nobody is using this dptx-phy anymore, so removing the
same.
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
They are not implemented anywhere, so wipe them out.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Description of the @create_connector callback was missing,
and the @manager was no longer needed.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Save a few bytes by compiling them all in the same byte.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This is a leftover, all code using this macro have been removed/
changed already.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Re-declare struct is not a good practice, let's use the original
drm and exynos declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
Re-declare struct is not a good practice, let's use the original
drm declarations.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The struct is defined in the same file, declare it here is just
unnecessary
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The struct is defined in the same file, declare it here is just
unnecessary.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
It is not even used in this header anymore.
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch replaces accesses to display->ctx pointer by container_of
construct. It will allow to remove ctx field in the future.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch removes redundant encoder field from private DSI context.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch replaces multiple evaluation of device address
with local variable.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
exynos_dsi_display is used by internal Exynos DRM framework for
representing pair encoder->connecter. As it should be mapped 1:1 to dsi
private context it seems more reasonable to embed it directly
in that context. As a result further code simplification will be possible.
Moreover it will be possible to handle multiple DSI devices in the system.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
The patch replaces separate calls to driver (de)registration by
loops over the array of drivers. As a result it significantly
decreases number of ifdefs. Additionally it moves device registration
related ifdefs to header file.
Changelog v2:
- Rebased.
- Consider non kms driver in respect to infinite loop issue.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch fixes null pointer dereference issue incurred
when ipp driver is enabled and Exynos drm driver is closed.
Non kms driver should register its own sub driver to setup necessary
resources, which is done by load(). So null pointer dereference
occurs when ipp driver is enabled and Exynos drm driver is closed
because ipp core device is registered after component_master_add_with_match
call.
This patch makes exynos_drm_device_subdrv_probe() to be called after all non
kms drivers are registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch fixes possible infinite loop issue by postponing
registration to non kms drivers after component_master_add_with_match
call, which can be incurred in all cases that non kms driver is probed
and then component bind is failed
This patch should be applied on top of below patches,
http://comments.gmane.org/gmane.comp.video.dri.devel/117740
http://www.spinics.net/lists/linux-samsung-soc/msg38624.html
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch fixes a null pointer dereference issue incurred by
calling g2d_remove when exynos_drm_platform_probe is failed.
cmdlist_pool of g2d is allocated when g2d sub driver is probed.
So if exynos_drm_platform_probe is failed, the g2d sub driver is
not probed and the cmdlist_pool is still NULL.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch resovles the infinite loop issue incurred
when Exyno drm driver is enabled but all kms drivers
are disabled on Exynos board by returning -EPROBE_DEFER
only in case that there is kms device registered.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
This patch resolves temporarily infinite loop issue incurred
when Exynos drm driver is enabled and multi-platform kernel
is used by registering Exynos drm device object only in case
of Exynos SoC. So this patch will be replaced with more generic
way later.
Signed-off-by: Inki Dae <inki.dae@samsung.com>
|
|
In disable_outputs() we need to shut down the outgoing encoder, not the
incoming one (we have already swapped-state at this point). Without
this, we end up telling the driver to crtc->dpms(OFF) without first
encoder->dpms(OFF), and that makes some hw quite unhappy.
v2: missing WARN_ON() hunk and comment
Reviewed-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The intention is that drivers can set crtc_state->mode_changed in their
atomic_check() fxns if they encounter a scenario that requires full
modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
On mdp4 there is a single global LAYERMIXER_IN_CFG register. The
previous logic to share that between multiple crtcs didn't actually
handle plane-disable very well. Easier just to look at all of the
crtcs each time.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
When disabling the interface (INTF), the change doesn't latch until next
vblank, so we need to wait for vblank.
Also, to be pedantic, in the crtc, set all the mixer stages to unused.
It shouldn't really matter, since at this point we have already disabled
the INTF and waited for necessary vblank.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Convert mdp5 over to atomic helpers. Extend/wrap drm_plane_state to
track plane zpos and to keep track of the needed when applying the
atomic update. In mdp5's plane->atomic_check() we also need to check
for updates which require SMP reallocation, in order to trigger full
modeset.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Fixes for a couple little issues found in testing.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A bit cleaner.. and won't resulting in an attempt to kfree() a static
global in unload path.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
For example, use 'struct mdp5_smp *' everywhere instead of 'void *', but
only declare it as 'struct mdp5_smp;' in common headers, so the struct
body is still private. The accomplishes the desired modularity while
still letting the compiler provide some type checking for us.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
MDP5 currently support one single CRTC with its private pipe.
This change allows the configuration of multiple CRTCs with
the possibility to attach several public planes to these CRTCs.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Set a "safe" rate at first, in order to read out the hw revision. And
then after set the optimal value.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The hardware configuration modification from a version to another
is quite consequent. Introducing a configuration module
(mdp5_cfg) may make things more clear and easier to access when a
new hardware version comes up.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The Shared Memory Pool (SMP) has its own limitation, features and
state. Some examples are:
- the number of Memory Macro Block (MMB) and their size
- the number of lines that can be fetched
- the state of MMB currently allocated
- the computation of number of blocks required per plane
- client IDs ...
In order to avoid private data to be overwritten by other modules,
let's make these private to the SMP module.
Some of these depend on the hardware configuration, let's add them
to the mdp5_config struct.
In some hw configurations, some MMBs are statically tied to RGB
pipes and cannot be re-allocated dynamically. This change
introduces the concept of MMB static usage and makes sure that
dynamic MMB requests are dimensioned accordingly.
A note on passing a pipe pointer, instead of client IDs:
Client IDs are SMP-related information. Passing PIPE information
to SMP lets SMP module to find out which SMP client(s) are used.
This allows the SMP module to access the PIPE pointer, which can
be used for FIFO watermark configuration.
By the way, even though REG_MDP5_PIPE_REQPRIO_FIFO_WM_* registers
are part of the PIPE registers, their functionality is to reflect
the behavior of the SMP block. These registers access is now
restricted to the SMP module.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
A left-over from prior to component framework. The original intent was
to deal with hdmi getting unloaded before the master component, but that
isn't really going to work anyways. These days with the component
framework taking care to unload the master component first, we don't
have to worry about this.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
The core clock rate depends on the hw configuration. Once we have
read the hardware revision, we can set the core clock to its
maximum value.
Before then, the clock is set at a rate supported by all MDP5
revisions.
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
For mdp5, the irqs of hdmi/eDP/dsi0/dsi1 blocks get routed through the
mdp block. In order to decouple hdmi/eDP/etc, register an irq domain
in mdp5. When hdmi/dsi/etc are used with mdp4, they can directly setup
their irqs in their DT nodes as normal. When used with mdp5, instead
set the mdp device as the interrupt-parent, as in:
mdp: qcom,mdss_mdp@fd900000 {
compatible = "qcom,mdss_mdp";
interrupt-controller;
#interrupt-cells = <1>;
...
};
hdmi: qcom,hdmi_tx@fd922100 {
compatible = "qcom,hdmi-tx-8074";
interrupt-parent = <&mdp>;
interrupts = <8 0>; /* MDP5_HW_INTR_STATUS.INTR_HDMI */
...
};
There is a slight awkwardness, in that we cannot disable child irqs
at the mdp level, they can only be cleared in the child block. So
you must not use threaded irq handlers in the child. I'm not sure
if there is a better way to deal with that.
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
into drm-next
- More CI dpm fixes
- Initial DPM fan control for SI/CI (disabled by default)
- GPUVM multi-ring efficiency improvements
- Some cursor fixes
* 'drm-next-3.19' of git://people.freedesktop.org/~agd5f/linux: (22 commits)
drm/radeon: update the VM after setting BO address v4
drm/radeon: sync PT updates as shared v2
drm/radeon: sync PD updates as shared
drm/radeon: fence BO_VAs manually
drm/radeon: use one VMID for each ring
drm/radeon: track VM update fences separately
drm/radeon: fence PT updates manually v2
drm/radeon: split semaphore and sync object handling v2
drm/radeon: remove unnecessary VM syncs
drm/radeon: stop re-reserving the BO in radeon_vm_bo_set_addr
drm/radeon: rework vm_flush parameters
drm/radeon/ci: disable needless sclk changes
drm/radeon/ci: force pcie level before sclk and mclk
drm/radeon/ci: use different smc command for pcie dpm
drm/radeon/ci: apply disp voltage changes before clk changes
drm/radeon: fix PCC debugging message for CI DPM
drm/radeon/dpm: add thermal dpm support for CI
drm/radeon/dpm: add smc fan control for CI (v2)
drm/radeon/dpm: add smc fan control for SI (v2)
drm/radeon: work around a hw bug in MGCG on CIK
...
|
|
The vfree() function performes also input parameter validation. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
The vunmap() function performes also input parameter validation. Thus the test
around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
"drm_fbdev_cma_hotplug_event"
The drm_fbdev_cma_hotplug_event() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
"release_firmware"
The release_firmware() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Reviewed-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This is an oversight from
commit f52b69f1ecfdd7ef6867a257620258c09e569552
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Wed Nov 19 18:38:08 2014 +0100
drm/atomic: Don't overrun the connector array when hotplugging
Cc: Dave Airlie <airlied@redhat.com>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
