summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-04-25rtnl: use nla_put_u64_64bit()Nicolas Dichtel2-18/+19
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25wcn36xx: Fill in capability listBjorn Andersson2-1/+78
Fill in the capability list with more values from the downstream driver. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Correct remove bss key response encodingBjorn Andersson2-27/+1
The WCN36XX_HAL_RMV_BSSKEY_RSP carries a single u32 with "status", so we can use the standard status check function for decoding the result. This is the last user of the v2 status checker, so remove the struct and helper function. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Delete BSS before idling linkBjorn Andersson1-1/+1
When disabling the beacon we must delete the bss before idling the link. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use correct command struct for EXIT_BMPS_REQPontus Fuchs1-1/+1
EXIT_BMPS_REQ was using the command struct for ENTER_BMPS_REQ. I spotted this when looking at command dumps. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Implement multicast filteringPontus Fuchs4-6/+104
Pass the multicast list to FW. This patch also adds a way to build the smd command in place. This is needed because the MC list command is too big for the stack. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [bjorn: dropped FIF_PROMISC_IN_BSS usage] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Track association statePontus Fuchs2-0/+3
Knowing the association state is needed for mc filtering. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Clear encrypt_type when deleting bss keyPontus Fuchs1-0/+2
This fixes a problem connecting to an open network after being connected to an encrypted network. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use allocated self sta index instead of hard codedPontus Fuchs1-1/+1
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Copy all members in config_sta v1 conversionPontus Fuchs1-2/+17
When converting to version 1 of the config_sta struct not all members where copied. This fixes the problem of multicast frames not being delivered on an encrypted network. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Parse trigger_ba response properlyPontus Fuchs1-2/+12
This message does not follow the canonical format and needs it's own parser. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Remove sta pointer in private vif structPontus Fuchs3-17/+15
This does not work with multiple sta's in a vif. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Fetch private sta data from sta entry instead of from vifPontus Fuchs1-1/+1
For consistency with other code. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Add helper macros to cast sta to privPontus Fuchs3-14/+18
While poking at this I also change two related things. I rename one variable to make the names consistent. I also move one assignment of priv_sta to the declaration to save a few lines. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use define for invalid index and fix typoPontus Fuchs3-4/+4
Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Use consistent name for private vifPontus Fuchs1-14/+14
Some code used priv_vif and some used vif_priv. Convert all to vif_priv for consistency. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Add helper macros to cast vif to private vif and vice versaPontus Fuchs6-40/+36
Makes the code a little easier to read. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Pad TIM PVM if neededPontus Fuchs2-2/+28
The wcn36xx FW expects a fixed size TIM PVM in the beacon template. If supplied with a shorter than expected PVM it will overwrite the IE following the TIM. Squashed with fix from Jason Mobarak <jam@cozybit.com>: Patch "wcn36xx: Pad TIM PVM if needed" has caused a regression in mesh beaconing. The field tim_off is always 0 for mesh mode, and thus pvm_len (referring to the TIM length field) and pad are both incorrectly calculated. Thus, msg_body.beacon_length is incorrectly calculated for mesh mode. Fix this. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: Jason Mobarak <jam@cozybit.com> [bjorn: squashed in Jason's fixup] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25wcn36xx: Clean up wcn36xx_smd_send_beaconPontus Fuchs2-8/+9
Needed for coming improvements. No functional changes. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> [bjorn: restored BEACON_TEMPLATE_SIZE define to 0x180] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25ath9k: Fix LED polarity for some Mini PCI AR9220 MB92 cards.Vittorio Gambaletta (VittGam)1-0/+10
The Wistron DNMA-92 and Compex WLM200NX have inverted LED polarity (active high instead of active low). The same PCI Subsystem ID is used by both cards, which are based on the same Atheros MB92 design. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25ath9k: Add a module parameter to invert LED polarity.Vittorio Gambaletta (VittGam)1-0/+7
The LED can be active high instead of active low on some hardware. Add the led_active_high module parameter. It defaults to -1 to obey platform data as before. Setting the parameter to 1 or 0 will force the LED respectively active high or active low. Cc: <linux-wireless@vger.kernel.org> Cc: <ath9k-devel@qca.qualcomm.com> Cc: <ath9k-devel@lists.ath9k.org> Cc: <stable@vger.kernel.org> Signed-off-by: Vittorio Gambaletta <linuxbugs@vittgam.net> Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2016-04-25soreuseport: Resolve merge conflict for v4/v6 ordering fixCraig Gallek2-2/+10
d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") was merged as a bug fix to the net tree. Two conflicting changes were committed to net-next before the above fix was merged back to net-next: ca065d0cf80f ("udp: no longer use SLAB_DESTROY_BY_RCU") 3b24d854cb35 ("tcp/dccp: do not touch listener sk_refcnt under synflood") These changes switched the datastructure used for TCP and UDP sockets from hlist_nulls to hlist. This patch applies the necessary parts of the net tree fix to net-next which were not automatic as part of the merge. Fixes: 1602f49b58ab ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net") Signed-off-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25Merge branch 'linus' of ↵Linus Torvalds1-30/+57
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "This fixes a couple of regressions in the talitos driver that were introduced back in 4.3. The first bug causes a crash when the driver's AEAD functionality is used while the second bug prevents its AEAD feature from working once you get past the first bug" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix AEAD tcrypt tests crypto: talitos - fix crash in talitos_cra_init()
2016-04-25Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of ↵Kevin Hilman2-31/+238
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Enable dm814x and dra62x clock driver. This branch has a dependency to the clk-ti branch from the Linux clk tree for the ADPLL clock driver. Otherwise things won't keep booting properly when we flip over to use the clock driver instead of fixed clocks set up by the bootloader. * tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add clocks for dm814x ADPLL
2016-04-25sock: relax WARN_ON() in sock_owned_by_user()Eric Dumazet1-1/+1
Valdis reported tons of stack dumps caused by WARN_ON() in sock_owned_by_user() This test needs to be relaxed if/when lockdep disables itself. Note that other lockdep_sock_is_held() callers are all from rcu_dereference_protected() sections which already are disabled if/when lockdep has been disabled. Fixes: fafc4e1ea1a4 ("sock: tigthen lockdep checks for sock_owned_by_user") Reported-by: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ixgbe: use msleep for long delaysArnd Bergmann1-1/+1
The newly added x550em_a support causes a link failure on ARM because of an overly long time passed into udelay(): ERROR: "__bad_udelay" [drivers/net/ethernet/intel/ixgbe/ixgbe.ko] undefined! There are multiple variants of the ixgbe_acquire_swfw_sync_*() function, and the other ones all use msleep(), so we can safely assume that all callers are allowed to sleep, which makes msleep() a better replacement than mdelay(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 49425dfc7451 ("ixgbe: Add support for x550em_a 10G MAC type") Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: Move API negotiation function into mac_opsAlexander Duyck3-4/+5
This patch moves API negotiation into mac_ops. The general idea here is that with HyperV on the way we need to make certain that anything that will have different versions between HyperV and a standard VF needs to be abstracted enough so that we can have a separate function between the two so we can avoid changes in one breaking something in the other. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe/ixgbevf: Add support for GSO partialAlexander Duyck2-82/+180
This patch adds support for partial GSO segmentation in the case of tunnels. Specifically with this change the driver an perform segmentation as long as the frame either has IPv6 inner headers, or we are allowed to mangle the IP IDs on the inner header. This is needed because we will not be modifying any fields from the start of the start of the outer transport header to the start of the inner transport header as we are treating them like they are just a block of IP options. Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: make use of BIT() macro to avoid shift of signed valuesJacob Keller4-26/+27
Also cleanup a case where we're bit shifting a value into place, and use an unsigned constant. Make use of the unsigned postfix in places where BIT() macro is not appropriate. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: resolve shift of negative value warningJacob Keller1-2/+2
Make use of GENMASK instead of open coding the equivalent operation incorrectly. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: use BIT() macroJacob Keller17-195/+195
Several areas of ixgbe were written before widespread usage of the BIT(n) macro. With the impending release of GCC 6 and its associated new warnings, some usages such as (1 << 31) have been noted within the ixgbe driver source. Fix these wholesale and prevent future issues by simply using BIT macro instead of hand coded bit shifts. Also fix a few shifts that are shifting values into place by using the 'u' prefix to indicate unsigned. It doesn't strictly matter in these cases because we're not shifting by too large a value, but these are all unsigned values and should be indicated as such. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: Add work around for empty SFP+ cage crosstalkDon Skidmore3-0/+42
It is possible on some systems that crosstalk could lead to link flap on empty SFP+ cages. A new NVM bit was defined to let SW know it needs to implement the work around which consists of verifying that there is a module in the cage before acting on the LSC. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: Use correct FC setup function for x550em_aMark Rustad1-2/+2
Somehow the wrong fc_setup function was used for x550em_a, so correct that. Also set setup_link to NULL as its value is determined later, just like it is with X550EM_x. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: add support for per-queue ethtool statsEmil Tantilov2-46/+91
Implement per-queue statistics for packets, bytes and busy poll specific counters. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbevf: refactor ethtool stats handlingEmil Tantilov1-62/+64
This brings the logic closer to how we handle the stats in ixgbe and it sets us up for introducing per-queue stats. Use IXGBEVF_STAT and IXGBEVF_NETDEV_STAT for accessing the driver and netdev stats respectively. This way we don't have to calculate the stats based on register values which could lead to the counters not being initialized properly when the interface is down. IXGBEVF_QUEUE_STATS_LEN is set to include the number of queues. Also some defines were renamed to use the IXGBEVF prefix. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: Add register wait for slow linksMark Rustad2-0/+22
Use a new register to wait for previous register writes to complete before issuing a register read. This is needed when slower links are in use. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25hv_netvsc: Fix the list processing for network change eventHaiyang Zhang1-1/+1
RNDIS_STATUS_NETWORK_CHANGE event is handled as two "half events" -- media disconnect & connect. The second half should be added to the list head, not to the tail. So all events are processed in normal order. Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ipv4/fib: don't warn when primary address is missing if in_dev is deadPaolo Abeni1-1/+5
After commit fbd40ea0180a ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-25ixgbe: make 'action' field in struct ixgbe_fdir_filter a u64 valueSridhar Samudrala1-1/+1
This field is used to record the RX queue index for a redirect action passed via ring_cookie field in struct ethtool_rx_flow_spec which is a u64 value. For ex: after adding a filter rule to redirect to a VF using ethtool # echo 4 > /sys/class/net/p4p1/device/sriov_numvfs # ethtool -N p4p1 flow-type ip4 src-ip 192.168.0.1 action 0x100000000 querying for the rule shows the Action as 'Direct to queue 0' # ethtool -n p4p1 4 RX rings available Total 1 rules Filter: 2045 Rule Type: Raw IPv4 Src IP addr: 192.168.0.1 mask: 0.0.0.0 Dest IP addr: 0.0.0.0 mask: 255.255.255.255 TOS: 0x0 mask: 0xff Protocol: 0 mask: 0xff L4 bytes: 0x0 mask: 0xffffffff VLAN EtherType: 0x0 mask: 0xffff VLAN: 0x0 mask: 0xffff User-defined: 0x0 mask: 0xffffffffffffffff Action: Direct to queue 0 With this fix, ethtool will report the right queue index even for VFs. Action: Direct to queue 4294967296 Here 4294967296 corresponds to 0x100000000. We need to update 'ethtool' to report the queue index as a Hex value so that it is more user friendly and matches with the 'action' value that is passed when adding the rule. Signed-off-by: Sridhar Samudrala <sridhar.samudrala@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: fix default mac->ops.setup_link for X550EMEmil Tantilov1-2/+2
X550EM_a/x did not have a default value for mac->ops.setup_link which was causing link issues for backplane devices. This patch sets mac->ops.setup_link to ixgbe_setup_mac_link_X540 for X550EM_a/x which is also default for X550. This will result in mac->ops.setup_link calling the link setup function for the respective PHY type in case we do not need a special function to deal with it. Reported-by: Ken Cox <jkc@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: set VLAN spoof checking unconditionallyEmil Tantilov2-26/+2
Previously the PF driver would only set VLAN spoof checking if the VF had created VLANs. This was done by setting and checking a counter (vlan_count) whenever a VLAN was created by the VF. However it is possible for the vlan_count to be !=0 while there are no VLANs assigned to the VF due to the count incrementing every time a VLAN 0 is added on ifdown/up, which resulted in VLAN spoofing always being set for those VFs. This patch cleans up the logic by unconditionally setting VLAN based on how the VF is configured (via ip link set ethX vf Y spoofchk on/off). This change also resolves an issue where the VLAN spoofing can remain set even after being disabled by the user due to the driver enabling VLAN spoof checking every time a VLAN is added to the VF, but would only allow changes in the setting if vlan_count != 0. Also default_vf_vlan_id and vlans_enabled were removed from the vf_data_storage structure since they are not being used in the driver. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25ixgbe: consolidate the configuration of spoof checkingEmil Tantilov4-73/+42
Consolidate the logic behind configuring spoof checking: Move the setting of the MAC, VLAN and Ethertype spoof checking into ixgbe_ndo_set_vf_spoofchk(). Change ixgbe_set_mac_anti_spoofing() to set MAC spoofing per VF similar to the VLAN and Ethertype functions - this allows us to call the helper functions in ixgbe_ndo_set_vf_spoofchk() for all spoof check types and only disable MAC spoof checking when creating MACVLAN. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-25Linux 4.6-rc5Linus Torvalds1-1/+1
2016-04-24Merge branch 'mlx5-fixes'David S. Miller11-67/+157
Saeed Mahameed says: ==================== mlx5 driver updates and fixes Changes from V0: - Dropped: ("net/mlx5e: Reset link modes upon setting speed to zero") - Fixed compilation issue introduced to mlx5_ib driver. - Rebased to df637193906a ('Revert "Prevent NUll pointer dereference with two PHYs on cpsw"') This series has few bug fixes for mlx5 core and ethernet driver. Eli fixed a wrong static local variable declaration in flow steering API. Majd added the support of ConnectX-5 PF and VF and added the support for kernel shutdown pci callback for more robust reboot procedures. Maor fixed a soft lockup in flow steering. Rana fixed a wrog speed define in mlx5 EN driver. I also had the chance to introduce some bug fixes in mlx5 EN mtu reporting and handling. For -stable: net/mlx5_core: Fix soft lockup in steering error flow net/mlx5e: Device's mtu field is u16 and not int net/mlx5e: Fix minimum MTU net/mlx5e: Use vport MTU rather than physical port MTU ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5: Add pci shutdown callbackMajd Dibbiny3-9/+36
This patch introduces kexec support for mlx5. When switching kernels, kexec() calls shutdown, which unloads the driver and cleans its resources. In addition, remove unregister netdev from shutdown flow. This will allow a clean shutdown, even if some netdev clients did not release their reference from this netdev. Releasing The HW resources only is enough as the kernel is shutting down Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5_core: Remove static from local variableEli Cohen1-1/+1
The static is not required and breaks re-entrancy if it will be required. Fixes: 2530236303d9 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Use vport MTU rather than physical port MTUSaeed Mahameed3-9/+77
Set and report vport MTU rather than physical MTU, Driver will set both vport and physical port mtu and will rely on the query of vport mtu. SRIOV VFs have to report their MTU to their vport manager (PF), and this will allow them to work with any MTU they need without failing the request. Also for some cases where the PF is not a port owner, PF can work with MTU less than the physical port mtu if set physical port mtu didn't take effect. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Fix minimum MTUSaeed Mahameed1-3/+8
Minimum MTU that can be set in Connectx4 device is 68. This fixes the case where a user wants to set invalid MTU, the driver will fail to satisfy this request and the interface will stay down. It is better to report an error and continue working with old mtu. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5e: Device's mtu field is u16 and not intSaeed Mahameed4-12/+12
For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-04-24net/mlx5_core: Add ConnectX-5 to list of supported devicesMajd Dibbiny1-0/+2
Add the upcoming ConnectX-5 devices (PF and VF) to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 18:06:34 +0300