summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-27ASoC: dt-bindings: fsl-sai: Add new property to configure datalineShengjiu Wang1-0/+8
"fsl,dataline" is added to configure the dataline of SAI. It has 3 value for each configuration, first one means the type: I2S(1) or PDM(2), second one is dataline mask for 'rx', third one is dataline mask for 'tx'. for example: fsl,dataline = <1 0xff 0xff 2 0xff 0x11>, it means I2S type rx mask is 0xff, tx mask is 0xff, PDM type rx mask is 0xff, tx mask is 0x11 (dataline 1 and 4 enabled). Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-7-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Make res a member of struct fsl_saiShengjiu Wang2-4/+4
The resource info need to be accessed by hw_params() function for multi fifo case, the start address may be not the FIFO0. So move it to be a member of struct fsl_sai. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-6-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoc: fsl_sai: Add pinctrl operation for PDM and DSDShengjiu Wang2-9/+63
With DSD format, the pinctrl is different compare with I2S format, because one dataline only has one channel data, and the codec always mux the LRCLK pin to DSD data line, and on i.MX8MQ the BCLK pin can route to codec on DSD case for the MCLK is too high. Add pinctrl operation that the pinctrl can be switched on runtime according to the I2S format or DSD format Signed-off-by: Viorel Suman <viorel.suman@nxp.com> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-5-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Add support for more sample ratesShengjiu Wang1-3/+4
Add support for more sample rates, because PDM format bitstream has higher sample rates. for example DSD512 format, the bit clock is 22.5792MHz, if the word width is U8_LE, then the max sample rate is 2822400. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Add DSD bit format supportShengjiu Wang1-1/+4
Support DSD_U8, DSD_U16_LE, DSD_U32_LE. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-3-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-27ASoC: fsl_sai: Add PDM daifmt supportShengjiu Wang2-2/+16
PDM format is used for 1-bit stream, so clear the FBT and SYWD, and the each dataline only has one channel data. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1655451877-16382-2-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: cs35l41: Add support for CLSA3541 ACPI device IDCristian Ciocaltea1-0/+1
Add support for the CLSA3541 ACPI device ID used on Valve's Steam Deck. The driver is fully compatible with the indicated hardware, hence no additional changes are required. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Acked-by: David Rhodes <drhodes@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621213819.262537-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: rockchip: i2s: Fix missing error code in rockchip_i2s_probe()Jiapeng Chong1-0/+1
The error code is missing in this code scenario, add the error code '-EINVAL' to the return value 'ret'. This was found by coccicheck: sound/soc/rockchip/rockchip_i2s.c:810 rockchip_i2s_probe() warn: missing error code 'ret'. Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20220624082745.68367-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-24ASoC: Intel: haswell and broadwell boards updateMark Brown7-547/+462
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: A number of patches improving overall quality and readability of haswell.c and broadwell.c source files found in sound/soc/intel/boards. Both files are first renamed and only then actual changes are being incrementally added. The respective names are: hsw_rt5640 and bdw_rt286 to match the pattern found in more recent boards. Most patches bring no functional change - the more impactful patches at are placed the end. The last patch is removing of FE DAI ops. Given the existence of platform FE DAI capabilities (either static declaration or through topology file), this code is redundant.
2022-06-23ASoC: dapm: Move stereo autodisable checkCharles Keepax1-5/+5
Tidy up the code a little, rather than repeating the check of mc->autodisable move the stereo error check to be under the existing if for mc->autodisable. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-6-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: topology: KUnit: Followup prototype change of snd_soc_unregister_card()Uwe Kleine-König1-20/+10
snd_soc_unregister_card() was recently converted to return void. Only the first instance was adapted, so convert the remaining ones now to fix building the topology test. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1892a991886a ("ASoC: core: Make snd_soc_unregister_card() return void") Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220622210629.286487-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Remove FE DAI opsCezary Rojewski1-25/+0
bdw_rt286_fe_ops is redundant as platform components already limit the number of channels available for the endpoint. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-18-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Improve codec_init() qualityCezary Rojewski1-4/+3
Drop redundant 'ret' assignemnt, stop ignoring set_jack() return value and reword local 'component' variable to 'codec' to improve readability. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-16-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Improve hw_params() debug-abilityCezary Rojewski1-1/+1
Print status if setting sysclk fails. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-15-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Improve probe() function qualityCezary Rojewski1-12/+11
Declare local 'dev' and make use of it plus dev_get_platdata() to improve code readability. Relocate few relevant to the function macros for the exact same read too. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-14-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Update file commentsCezary Rojewski2-17/+8
Drop redundant and update valuable comments within the file to increase readability. This patch also revisits module information and kconfig help strings. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-13-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Update code indentationCezary Rojewski1-51/+28
Make use of 100 character limit and modify indentation so code is easier to read. While at it, sort includes in alphabetical order. While at it, rename local variable 'chan' to 'channels' to match hsw_rt5640 board's equivalent. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-12-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Reword driver nameCezary Rojewski2-3/+3
Align with other Intel boards naming convention and let the name explicitly state which components are being connected. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-11-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: bdw_rt286: Reword prefixes of all driver membersCezary Rojewski1-51/+51
Replace ambiguous 'broadwell_rt286_' prefixes in favour of 'card_', 'link_' and other similar strings to clearly state which object given member implements behavior for. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-10-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: Rename broadwell source file to bdw_rt286Cezary Rojewski2-1/+1
Rename source file to drop any ambiguity. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-9-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Improve hw_params() debug-abilityCezary Rojewski1-1/+1
Print status if setting sysclk fails. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Improve probe() function qualityCezary Rojewski1-3/+4
Declare local 'dev' and make use of it plus dev_get_platdata() to improve code readability. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-7-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Update file commentsCezary Rojewski2-11/+7
Drop redundant and update valuable comments within the file to increase readability. This patch also revisits module information and kconfig help strings. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-6-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Update code indentationCezary Rojewski1-41/+18
Make use of 100 character limit and modify indentation so code is easier to read. While at it, sort includes in alphabetical order. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-5-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Reword driver nameCezary Rojewski2-4/+4
Align with other Intel boards naming convention and let the name explicitly state which components are being connected. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-4-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: hsw_rt5640: Reword prefixes of all driver membersCezary Rojewski1-23/+23
Replace ambiguous 'haswell_rt5640_' prefixes in favour of 'card_', 'link_' and other similar strings to clearly state which object given member implements behavior for. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-3-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-23ASoC: Intel: Rename haswell source file to hsw_rt5640Cezary Rojewski2-1/+1
Rename source file to drop any ambiguity. Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220620101402.2684366-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22ASoC: rockchip: i2s: switch BCLK to GPIOMark Brown2-45/+42
Merge series from Judy Hsiao <judyhsiao@chromium.org>: The patches series is to fix the unexpected large DC output voltage of Max98357a that burns the speakers on the rockchip platform when BCLK and SD_MODE are ON but LRCLK is OFF.
2022-06-22Add MT8186 ADSP dt-bindingMark Brown4-31/+110
Merge series from Tinghan Shen <tinghan.shen@mediatek.com>: Some updates to the DT bindings to make things less surprising for users.
2022-06-22ASoC: rockchip: i2s: Fix crash on missing pinctrlChen-Yu Tsai1-15/+14
Commit 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") added pinctrl lookups, but did not skip the lookup if there was no pinctrl device tied to the I2S controller. As a result, the lookup was done on an invalid pointer in such cases, causing a kernel panic. Only do the subsequent pinctrl state lookups and switch if a pinctrl device was found. i2s_pinctrl_select_bclk_{on,off} already guard against missing pinctrl device or pinctrl state, so those two functions aren't touched. Fixes: 44f362c2cc6d ("ASoC: rockchip: i2s: switch BCLK to GPIO") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20220621185747.2782-1-wens@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22ASoC: amd: acp: Fix error handling in .remove()Uwe Kleine-König1-8/+2
Even in the presence of problems (here: rn_acp_deinit() might fail), it's important to unregister all resources acquired during .probe() because even if .remove() returns an error code, the device is removed. As .remove() is only called after .probe() returned success, platdata must be valid, so the first check in .remove() can just be dropped. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220622061739.225966-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22ASoC: core: Make snd_soc_unregister_card() return voidUwe Kleine-König5-11/+8
The function snd_soc_unregister_card() returned 0 unconditionally and most callers don't care to check the return value. Make it return void and adapt the callers that didn't ignore the return value before. This is a preparation for making platform remove callbacks return void. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20220621145834.198519-1-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22ASoC: SOF: mediatek: Align mt8186 clock names with dt-bindingsTinghan Shen1-2/+2
Align clock names in mt8186 dsp driver with dt-bindings. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Link: https://lore.kernel.org/r/20220622062245.21021-5-tinghan.shen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22dt-bindings: dsp: mediatek: Add mt8186 dsp documentTinghan Shen1-0/+91
This patch adds mt8186 dsp document. The dsp is used for Sound Open Firmware driver node. It includes registers, clocks, memory regions, and mailbox for dsp. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220622062245.21021-4-tinghan.shen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22firmware: mediatek: Use meaningful names for mboxTinghan Shen1-24/+12
Rename mbox according to actions instead of 'mbox0' and 'mbox1' Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Link: https://lore.kernel.org/r/20220622062245.21021-3-tinghan.shen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22dt-bindings: dsp: mediatek: Use meaningful names for mboxTinghan Shen1-5/+5
Rename mbox according to actions instead of 'mbox0' and 'mbox1'. The 8195 dsp node, which uses this binding, has not yet been added to the 8195 devicetree. Signed-off-by: Tinghan Shen <tinghan.shen@mediatek.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220622062245.21021-2-tinghan.shen@mediatek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-22ASoC: Merge fixesMark Brown14-130/+272
Needed for new development.
2022-06-21ASoC: dt-bindings: rockchip: Document pinctrl-names for i2sJudy Hsiao1-0/+7
This patch documents pinctrl-names for i2s. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Link: https://lore.kernel.org/r/20220619095324.492678-4-judyhsiao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: rockchip: i2s: switch BCLK to GPIOJudy Hsiao1-46/+123
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch switches BCLK to GPIO func before LRCLK output, and configures BCLK func back during LRCLK is output. Without this fix, BCLK is turned on 11 ms earlier than LRCK by the da7219. With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by the rockchip codec. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20220619095324.492678-2-judyhsiao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: core: Add new SOC_DOUBLE_SX_TLV macroCharles Keepax1-0/+12
Currently macros only exist for SX style (implicit sign bit 2's compliment) volume controls where the volumes for left and right are in separate registers. Some future Cirrus devices will have both volumes in the same register, as such add a new macro to support this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: rt711-sdca: fix kernel NULL pointer dereference when IO errorShuming Fan1-2/+2
The initial settings will be written before the codec probe function. But, the rt711->component doesn't be assigned yet. If IO error happened during initial settings operations, it will cause the kernel panic. This patch changed component->dev to slave->dev to fix this issue. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20220621090719.30558-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: cs35l41: Correct some control namesCharles Keepax1-6/+6
Various boolean controls on cs35l41 are missing the required "Switch" in the name, add these. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: wm5110: Fix DRE controlCharles Keepax1-2/+6
The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-21ASoC: wm_adsp: Fix event for preloaderCharles Keepax1-1/+1
The preloader controls on ADSP should return a value of 1 if the preloader value was changed, update to correct this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20remap: Some fixes for bulk read/write callbacks in regmap_config supportMark Brown1-7/+8
Merge series from Javier Martinez Canillas <javierm@redhat.com>: This series contains fixes for a few issues found while testing the recent support for drivers to define bulk read/write callbacks in regmap_config. I tested this with drivers/gpu/drm/solomon/ssd130x-spi.c, by converting it to use this new API instead of defining its own regmap bus for bulk write. Patch #1 and patch #2 are fixes for regresions introduced by that commit and patch #3 adds regmap_config provided bulk write support to functions regmap_noinc_write() and regmap_bulk_write(), that were missed.
2022-06-20ASoC: fsl_asrc_dma: Use dmaengine_terminate_async()Sascha Hauer1-2/+2
dmaengine_terminate_all() is deprecated and should no longer be used. Use dmaengine_terminate_async() instead. This involves no functional change since both functions do the same. After dmaengine_terminate_async() dmaengine_synchronize() must be called to make sure the channel has really stopped before the underlying memory is freed. This is done implicitly by dma_release_channel() called from the .hw_free hook. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220617120133.4011846-1-s.hauer@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20MAINTAINERS: update ASoC Qualcomm maintainer email-idSrinivas Kandagatla1-1/+1
Update Banajit's email address from codeaurora.org to quicinc.com, as codeaurora.org is not in use anymore. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20220617210230.7685-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20ASoC: rockchip: i2s: switch BCLK to GPIOJudy Hsiao1-31/+129
We discoverd that the state of BCLK on, LRCLK off and SD_MODE on may cause the speaker melting issue. Removing LRCLK while BCLK is present can cause unexpected output behavior including a large DC output voltage as described in the Max98357a datasheet. In order to: 1. prevent BCLK from turning on by other component. 2. keep BCLK and LRCLK being present at the same time This patch switches BCLK to GPIO func before LRCLK output, and configures BCLK func back during LRCLK is output. Without this fix, BCLK is turned on 11 ms earlier than LRCK by the da7219. With this fix, BCLK is turned on only 0.4 ms earlier than LRCK by the rockchip codec. Signed-off-by: Judy Hsiao <judyhsiao@chromium.org> Link: https://lore.kernel.org/r/20220615045643.3137287-1-judyhsiao@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20regmap: Wire up regmap_config provided bulk write in missed functionsJavier Martinez Canillas1-6/+4
There are some functions that were missed by commit d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") when support to define bulk read/write callbacks in regmap_config was introduced. The regmap_bulk_write() and regmap_noinc_write() functions weren't changed to use the added map->write instead of the map->bus->write handler. Also, the regmap_can_raw_write() was not modified to take map->write into account. So will only return true if a bus with a .write callback is set. Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220616073435.1988219-4-javierm@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-06-20regmap: Make regmap_noinc_read() return -ENOTSUPP if map->read isn't setJavier Martinez Canillas1-0/+3
Before adding support to define bulk read/write callbacks in regmap_config by the commit d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config"), the regmap_noinc_read() function returned an errno early a map->bus->read callback wasn't set. But that commit dropped the check and now a call to _regmap_raw_read() is attempted even when bulk read operations are not supported. That function checks for map->read anyways but there's no point to continue if the read can't succeed. Also is a fragile assumption to make so is better to make it fail earlier. Fixes: d77e74561368 ("regmap: Add bulk read/write callbacks into regmap_config") Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220616073435.1988219-3-javierm@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 15:14:49 +0300