| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Callers of __dev_alloc_name() want to pass dev->name as
the output buffer. Make __dev_alloc_name() not clobber
that buffer on failure, and remove the workarounds
in callers.
dev_alloc_name_ns() is now completely unnecessary.
The extra strscpy() added here will be gone by the end
of the patch series.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231023152346.3639749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential
buffer overflow") switched from snprintf to the more secure scnprintf
but never updated the exit condition for PAGE_SIZE.
As the commit say and as scnprintf document, what scnprintf returns what
is actually written not counting the '\0' end char. This results in the
case of len exceeding the size, len set to PAGE_SIZE - 1, as it can be
written at max PAGE_SIZE - 1 (as '\0' is not counted)
Because of len is never set to PAGE_SIZE, the function never break early,
never prints the warning and never return -EFBIG.
Fix this by changing the condition to PAGE_SIZE - 1 to correctly trigger
the error.
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Fixes: 3c0897c180c6 ("cpufreq: Use scnprintf() for avoiding potential buffer overflow")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Mat Martineau says:
====================
mptcp: convert Netlink code to use YAML spec
This series from Davide converts most of the MPTCP Netlink interface
(plus uAPI bits) to use sources generated by YNL using a YAML spec file.
This new YAML file is useful to validate the API and to generate a good
documentation page.
Patch 1 modifies YNL spec to support "uns-admin-perm" for genetlink
legacy.
Patch 2 adds support for validating exact length of netlink attrs.
Patch 3 converts Netlink structures from small_ops to ops to prepare the
switch to YAML.
Patch 4 adds the Netlink YAML spec for MPTCP.
Patch 5 adds and uses a new header file generated from the new YAML
spec.
Patch 6 renames some handlers to match the ones generated from the YAML
spec.
Patch 7 adds and uses Netlink policies automatically generated from the
YAML spec.
====================
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-0-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
generated with:
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
> --spec Documentation/netlink/specs/mptcp.yaml --source \
> -o net/mptcp/mptcp_pm_gen.c
$ ./tools/net/ynl/ynl-gen-c.py --mode kernel \
> --spec Documentation/netlink/specs/mptcp.yaml --header \
> -o net/mptcp/mptcp_pm_gen.h
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-7-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
so that they will match names generated from YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-6-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
generated with:
$ ./tools/net/ynl/ynl-gen-c.py --mode uapi \
> --spec Documentation/netlink/specs/mptcp.yaml \
> --header -o include/uapi/linux/mptcp_pm.h
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-5-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
it describes most of the current netlink interface (uAPI definitions,
doit/dumpit operations and attributes)
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-4-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
in the current MPTCP control plane, all operations use a netlink
attribute of the same type "MPTCP_PM_ATTR". However, add/del/get/flush
operations only parse the first element in the message _ the one that
describes MPTCP endpoints (that was named MPTCP_PM_ATTR_ADDR and
mostly used in ADD_ADDR operations _ probably the similarity of "attr",
"addr" and "add" might cause some confusion to human readers).
Convert MPTCP from 'small_ops' to 'ops', thus allowing different attributes
for each single operation, hopefully makes all this clearer to human
readers.
- use a separate attribute set for add/del/get/flush address operation,
binary compatible with the existing one, to store the endpoint address.
MPTCP_PM_ENDPOINT_ADDR is added to the uAPI (with the same value as
MPTCP_PM_ATTR_ADDR) for these operations.
- convert mptcp_pm_ops[] and add policy files accordingly.
this prepares MPTCP control plane to be described as YAML spec.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-3-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
add support for 'exact-len' validation on netlink attributes.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/340
Acked-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-2-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
this flag maps to GENL_UNS_ADMIN_PERM and will be used by future specs.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20231023-send-net-next-20231023-1-v2-1-16b1f701f900@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add GPE quirk entry for HP 250 G7 Notebook PC.
This change allows the lid switch to be identified as the lid switch
and not a keyboard button. With the lid switch properly identified, the
device triggers suspend correctly on lid close.
Signed-off-by: Jonathan Denose <jdenose@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes. 12 are cc:stable and the remainder address post-6.5
issues or aren't considered necessary for earlier kernel versions"
* tag 'mm-hotfixes-stable-2023-10-24-09-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
maple_tree: add GFP_KERNEL to allocations in mas_expected_entries()
selftests/mm: include mman header to access MREMAP_DONTUNMAP identifier
mailmap: correct email aliasing for Oleksij Rempel
mailmap: map Bartosz's old address to the current one
mm/damon/sysfs: check DAMOS regions update progress from before_terminate()
MAINTAINERS: Ondrej has moved
kasan: disable kasan_non_canonical_hook() for HW tags
kasan: print the original fault addr when access invalid shadow
hugetlbfs: close race between MADV_DONTNEED and page fault
hugetlbfs: extend hugetlb_vma_lock to private VMAs
hugetlbfs: clear resv_map pointer if mmap fails
mm: zswap: fix pool refcount bug around shrink_worker()
mm/migrate: fix do_pages_move for compat pointers
riscv: fix set_huge_pte_at() for NAPOT mappings when a swap entry is set
riscv: handle VM_FAULT_[HWPOISON|HWPOISON_LARGE] faults instead of panicking
mmap: fix error paths with dup_anon_vma()
mmap: fix vma_iterator in error path of vma_merge()
mm: fix vm_brk_flags() to not bail out while holding lock
mm/mempolicy: fix set_mempolicy_home_node() previous VMA pointer
mm/page_alloc: correct start page when guard page debug is enabled
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Convert manual _UID references to use the standard ACPI helper.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce acpi_dev_uid_match() helper that matches the device with
supplied _UID string.
Signed-off-by: Raag Jadav <raag.jadav@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add support for displaying 10-bit 4:2:0 and 4:2:2 formats produced by
the Rockchip Video Decoder on RK322X, RK3288, RK3328 and RK3399.
Also add support for 10-bit 4:4:4 format while at it.
V5: Use drm_format_info_min_pitch() for correct bpp
Add missing NV21, NV61 and NV42 formats
V4: Rework RK3328/RK3399 win0/1 data to not affect RK3368
V2: Added NV30 support
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-3-jonas@kwiboo.se
|
|
DRM_FORMAT_NV20 and DRM_FORMAT_NV30 formats is the 2x1 and non-subsampled
variant of NV15, a 10-bit 2-plane YUV format that has no padding between
components. Instead, luminance and chrominance samples are grouped into 4s
so that each group is packed into an integer number of bytes:
YYYY = UVUV = 4 * 10 bits = 40 bits = 5 bytes
The '20' and '30' suffix refers to the optimum effective bits per pixel
which is achieved when the total number of luminance samples is a multiple
of 4.
V2: Added NV30 format
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Sandy Huang <hjc@rock-chips.com>
Reviewed-by: Christopher Obbard <chris.obbard@collabora.com>
Tested-by: Christopher Obbard <chris.obbard@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231023173718.188102-2-jonas@kwiboo.se
|
|
'modalias' is only written with snprintf() and it is already guaranteed
to be nul-terminated, so remove the unneeded (but harmless) writes of a
trailing '\0' to it.
Also snprintf() never returns negative values, so remove redundant (but
harmless) checks for it.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
snprintf() does not return negative values on error.
To know if the buffer was too small, the returned value needs to be
compared with the length of the passed buffer. If it is greater or
equal, the output has been truncated, so add checks for the truncation
to create_pnp_modalias() and create_of_modalias(). Also make them
return -ENOMEM in that case, as they already do that elsewhere.
Moreover, the remaining size of the buffer used by snprintf() needs to
be updated after the first write to avoid out-of-bounds access as
already done correctly in create_pnp_modalias(), but not in
create_of_modalias(), so change the latter accordingly.
Fixes: 8765c5ba1949 ("ACPI / scan: Rework modalias creation when "compatible" is present")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[ rjw: Merge two patches into one, combine changelogs, add subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
formats_win_full_10bit is for cluster window,
formats_win_full_10bit_yuyv is for rk356x esmart, rk3588 esmart window
will support more format.
formats_win_lite is for smart window.
Rename it based the windows type may let meaning is clearer
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094339.2476142-1-andyshrk@163.com
|
|
Add 10 bit RGB and AFBC based YUV format supported
by vop2.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094318.2476081-1-andyshrk@163.com
|
|
The cluster window on vop2 doesn't support linear yuv
format(NV12/16/24), it only support afbc based yuv
format(DRM_FORMAT_YUV420_8BIT/10BIT), which will be
added in next patch.
Fixes: 604be85547ce ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094239.2475851-1-andyshrk@163.com
|
|
We can't rely on cpp for bpp calculation as the cpp of
some formats(DRM_FORMAT_YUV420_8BIT/10BIT, etc) is zero.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018094210.2475771-1-andyshrk@163.com
|
|
Since transformation from ACPI driver to platform driver there are two
devices on which the driver operates - ACPI device and platform device.
For the sake of reader this calls for the distinction in their naming,
to avoid confusion. Rename device to adev, as corresponding
platform device is called pdev.
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Change the way sysfs files are created. Use dev_groups, as it's a
better approach - it allows to declare attributes, and the core code
would take care of the lifecycle of those objects.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The acpi_pad driver uses struct acpi_driver to register itself while it
would be more logically consistent to use struct platform_driver for this
purpose, because the corresponding platform device is present and the
role of struct acpi_device is to amend the other bus types. ACPI devices
are not meant to be used as proper representation of hardware entities,
but to collect information on those hardware entities provided by the
platform firmware.
Use struct platform_driver for registering the acpi_pad driver.
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Michal Wilczynski <michal.wilczynski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Slow devices such as flash may not meet the default 1ms timeout value,
so use the ERST max execution time value that they provide as the
timeout if it is larger.
Signed-off-by: Jeshua Smith <jeshuas@nvidia.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In order to support burst mode, vendor drivers set lane_mbps higher than
bandwidth through DPI interface. So, calculate horizontal component lane
byte clock cycle(lbcc) based on lane_mbps instead of pixel clock rate for
burst mode.
Fixes: ac87d23694f4 ("drm/bridge: synopsys: dw-mipi-dsi: Use pixel clock rate to calculate lbcc")
Reported-by: Heiko Stübner <heiko@sntech.de>
Closes: https://lore.kernel.org/linux-arm-kernel/5979575.UjTJXf6HLC@diego/T/#u
Tested-by: Heiko Stübner <heiko@sntech.de> # px30 minievb with xinpeng xpp055c272
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231018035212.1778767-1-victor.liu@nxp.com
|
|
The mtk_clk_register_pll_ops() currently frees the "pll" parameter.
The function has two callers, mtk_clk_register_pll() and
mtk_clk_register_pllfh(). The first one, the _pll() function relies on
the free, but for the second _pllfh() function it causes a double free
bug.
Really the frees should be done in the caller because that's where
the allocation is.
Fixes: d7964de8a8ea ("clk: mediatek: Add new clock driver to handle FHCTL hardware")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/cd7fa365-28cc-4c34-ac64-6da57c98baa6@moroto.mountain
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
fpga_region_class_find() in fpga_region_test_class_find() will call
get_device() if the data is matched, which will increment refcount for
dev->kobj, so it should call put_device() to decrement refcount for
dev->kobj to free the region, because fpga_region_unregister() will call
fpga_region_dev_release() only when the refcount for dev->kobj is zero
but fpga_region_test_init() call device_register() in
fpga_region_register_full(), which also increment refcount.
So call put_device() after calling fpga_region_class_find() in
fpga_region_test_class_find(). After applying this patch, the following
memory leak is never detected.
unreferenced object 0xffff88810c8ef000 (size 1024):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 32 bytes):
b8 d1 fb 05 81 88 ff ff 08 f0 8e 0c 81 88 ff ff ................
08 f0 8e 0c 81 88 ff ff 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff817ebad7>] kmalloc_trace+0x27/0xa0
[<ffffffffa02385e1>] fpga_region_register_full+0x51/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff888105fbd1b8 (size 8):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 8 bytes):
72 65 67 69 6f 6e 30 00 region0.
backtrace:
[<ffffffff817ec023>] __kmalloc_node_track_caller+0x53/0x150
[<ffffffff82995590>] kvasprintf+0xb0/0x130
[<ffffffff83f713b1>] kobject_set_name_vargs+0x41/0x110
[<ffffffff8304ac1b>] dev_set_name+0xab/0xe0
[<ffffffffa02388a2>] fpga_region_register_full+0x312/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
unreferenced object 0xffff88810b3b8a00 (size 256):
comm "kunit_try_catch", pid 1875, jiffies 4294715298 (age 836.836s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 8a 3b 0b 81 88 ff ff ..........;.....
08 8a 3b 0b 81 88 ff ff e0 ac 04 83 ff ff ff ff ..;.............
backtrace:
[<ffffffff817ebad7>] kmalloc_trace+0x27/0xa0
[<ffffffff83056d7a>] device_add+0xa2a/0x15e0
[<ffffffffa02388b1>] fpga_region_register_full+0x321/0x430 [fpga_region]
[<ffffffffa0228e47>] 0xffffffffa0228e47
[<ffffffff829c479d>] kunit_try_run_case+0xdd/0x250
[<ffffffff829c9f2a>] kunit_generic_run_threadfn_adapter+0x4a/0x90
[<ffffffff81238b85>] kthread+0x2b5/0x380
[<ffffffff81097ded>] ret_from_fork+0x2d/0x70
[<ffffffff810034d1>] ret_from_fork_asm+0x11/0x20
Fixes: 64a5f972c93d ("fpga: add an initial KUnit suite for the FPGA Region")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Marco Pagani <marpagan@redhat.com>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231007094321.3447084-1-ruanjinjie@huawei.com
[yilun.xu@intel.com: slightly changes the commit message]
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-3-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the maintainer for the Intel MAX10 BMC Secure Update driver from
Russ Weight to Peter Colberg. Update the ABI documentation contact
information as well.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Acked-by: Peter Colberg <peter.colberg@intel.com>
Link: https://lore.kernel.org/r/20230928164753.278684-1-russell.h.weight@intel.com
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Link: https://lore.kernel.org/r/20231023032857.902699-2-yilun.xu@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A bug was recently found via CONFIG_DEBUG_ENTRY=y, and the x86
tree kinda is the main source of changes to the x86 entry code,
so enable this debug option by default in our defconfigs.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
|
|
Convert the Dialog Semiconductor DA9210 Multi-Phase 12A DC-DC Buck
Converter Device Tree binding documentation to json-schema.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/bfd1cf9d620a8229f5a5e62e6fe9e59c153d0830.1698051619.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The common reserved-memory bindings have recently been copied from the
kernel tree into dtschema. The preference is to host common, stable
bindings in dtschema. As reserved-memory is documented in the DT Spec,
it meets the criteria.
The v2023.09 version of dtschema is what contains the reserved-memory
schemas we depend on, so bump the minimum version to that. Otherwise,
references to these schemas will generate errors.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20231013200851.347042-1-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Currently drm_client_buffer_addfb() uses the legacy drm_mode_addfb(),
which uses bpp and depth to guess the wanted buffer format.
However, drm_client_buffer_addfb() already knows the exact buffer
format, so there is no need to convert back and forth between buffer
format and bpp/depth, and the function can just call drm_mode_addfb2()
directly instead.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4b84adfc686288714e69d0442d22f1259ff74903.1697379891.git.geert@linux-m68k.org
|
|
Since commit bad3db104f89 ("ARM: imx: source gpt per clk from OSC for
system timer") osc_per can be used for clocking the GPT which is not
scaled when entering low bus mode.
This clock source is available only on i.MX6Q (incl. i.MX6QP) and i.MX6DL.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20230810144451.1459985-7-alexander.stein@ew.tq-group.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Relieve the dump callback from having to check nlmsg_type upon each
call. Prep work for set element reset locking.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
When supporting OA for TGL, it was seen that the context valid bit in
the report ID was not defined, however revisiting the spec seems to have
this bit defined. The bit is used to determine if a context is valid on
a context switch and is essential to determine active and idle periods
for a context. Re-enable the context valid bit for gen12 platforms.
BSpec: 52196 (description of report_id)
v2: Include BSpec reference (Ashutosh)
Fixes: 00a7f0d7155c ("drm/i915/tgl: Add perf support on TGL")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230802202854.1224547-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 7eeaedf79989a8f131939782832e21e9218ed2a0)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
When determining if an if/else branch will always or never be taken, use
signed range knowledge in addition to currently used unsigned range knowledge.
If either signed or unsigned range suggests that condition is always/never
taken, return corresponding branch_taken verdict.
Current use of unsigned range for this seems arbitrary and unnecessarily
incomplete. It is possible for *signed* operations to be performed on
register, which could "invalidate" unsigned range for that register. In such
case branch_taken will be artificially useless, even if we can still tell
that some constant is outside of register value range based on its signed
bounds.
veristat-based validation shows zero differences across selftests, Cilium,
and Meta-internal BPF object files.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/bpf/20231022205743.72352-2-andrii@kernel.org
|
|
The bpf_user_ringbuf_drain() BPF_CALL function uses an atomic_set()
immediately preceded by smp_mb__before_atomic() so as to order storing
of ring-buffer consumer and producer positions prior to the atomic_set()
call's clearing of the ->busy flag, as follows:
smp_mb__before_atomic();
atomic_set(&rb->busy, 0);
Although this works given current architectures and implementations, and
given that this only needs to order prior writes against a later write.
However, it does so by accident because the smp_mb__before_atomic()
is only guaranteed to work with read-modify-write atomic operations, and
not at all with things like atomic_set() and atomic_read().
Note especially that smp_mb__before_atomic() will not, repeat *not*,
order the prior write to "a" before the subsequent non-read-modify-write
atomic read from "b", even on strongly ordered systems such as x86:
WRITE_ONCE(a, 1);
smp_mb__before_atomic();
r1 = atomic_read(&b);
Therefore, replace the smp_mb__before_atomic() and atomic_set() with
atomic_set_release() as follows:
atomic_set_release(&rb->busy, 0);
This is no slower (and sometimes is faster) than the original, and also
provides a formal guarantee of ordering that the original lacks.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/ec86d38e-cfb4-44aa-8fdb-6c925922d93c@paulmck-laptop
|
|
htab_lock_bucket uses the following logic to avoid recursion:
1. preempt_disable();
2. check percpu counter htab->map_locked[hash] for recursion;
2.1. if map_lock[hash] is already taken, return -BUSY;
3. raw_spin_lock_irqsave();
However, if an IRQ hits between 2 and 3, BPF programs attached to the IRQ
logic will not able to access the same hash of the hashtab and get -EBUSY.
This -EBUSY is not really necessary. Fix it by disabling IRQ before
checking map_locked:
1. preempt_disable();
2. local_irq_save();
3. check percpu counter htab->map_locked[hash] for recursion;
3.1. if map_lock[hash] is already taken, return -BUSY;
4. raw_spin_lock().
Similarly, use raw_spin_unlock() and local_irq_restore() in
htab_unlock_bucket().
Fixes: 20b6cc34ea74 ("bpf: Avoid hashtab deadlock with map_locked")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/7a9576222aa40b1c84ad3a9ba3e64011d1a04d41.camel@linux.ibm.com
Link: https://lore.kernel.org/bpf/20231012055741.3375999-1-song@kernel.org
|
|
acpi_scan_device_not_present() is called when a device in the
hierarchy is not available for enumeration. Historically enumeration
was only based on whether the device was present.
To add support for only enumerating devices that are both present
and enabled, this helper should be renamed. It was only ever about
enumeration, rename it acpi_scan_device_not_enumerated().
No change in behaviour is intended.
Signed-off-by: James Morse <james.morse@arm.com>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Miguel Luis <miguel.luis@oracle.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
EEXIST
Return struct nft_elem_priv instead of struct nft_set_ext for
consistency with ("netfilter: nf_tables: expose opaque set element as
struct nft_elem_priv") and to prepare the introduction of element
timeout updates from control path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of copying struct nft_set_elem into struct nft_trans_elem, store
the pointer to the opaque set element object in the transaction. Adapt
set backend API (and set backend implementations) to take the pointer to
opaque set element representation whenever required.
This patch deconstifies .remove() and .activate() set backend API since
these modify the set element opaque object. And it also constify
nft_set_elem_ext() this provides access to the nft_set_ext struct
without updating the object.
According to pahole on x86_64, this patch shrinks struct nft_trans_elem
size from 216 to 24 bytes.
This patch also reduces stack memory consumption by removing the
template struct nft_set_elem object, using the opaque set element object
instead such as from the set iterator API, catchall elements and the get
element command.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add placeholder structure and place it at the beginning of each struct
nft_*_elem for each existing set backend, instead of exposing elements
as void type to the frontend which defeats compiler type checks. Use
this pointer to this new type to replace void *.
This patch updates the following set backend API to use this new struct
nft_elem_priv placeholder structure:
- update
- deactivate
- flush
- get
as well as the following helper functions:
- nft_set_elem_ext()
- nft_set_elem_init()
- nft_set_elem_destroy()
- nf_tables_set_elem_destroy()
This patch adds nft_elem_priv_cast() to cast struct nft_elem_priv to
native element representation from the corresponding set backend.
BUILD_BUG_ON() makes sure this .priv placeholder is always at the top
of the opaque set element representation.
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
.flush is always successful since this results from iterating over the
set elements to toggle mark the element as inactive in the next
generation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Use the element object that is already offered instead.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Relieve the dump callback from having to inspect nlmsg_type upon each
call, just do it once at start of the dump.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No need to allocate it if one may just use struct netlink_callback's
scratch area for it.
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
