summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-10-12Input: twl6040-vibra: Check the selected path for vibraPeter Ujfalusi1-0/+7
The VIBSELL/R bit in the VIBCTLL/R register tells the source of the data, which is going to be used to drive the attached motor(s). Do not allow effect execution if any of the channels are set to receive audio data. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12MFD: twl6040: function to query the vibra status for clientsPeter Ujfalusi2-0/+15
If the client only interested, if any of the vibra channels enabled, or if any of the channels are set to receive audio data via PDM. This function targets mainly the vibra driver, so it can check if it is allowed to execute effects ot not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12MFD: twl6040: Cache the vibra control registersPeter Ujfalusi2-4/+16
The vibra control register will be used from the ASoC codec driver as well. In order to avoid latency issues caused by I2C read access, cache the two control register within the core driver, so we do not need to reach out to the chip to read it back. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12Input: twl6040: Simplify vibra regsiter definitionsPeter Ujfalusi2-19/+13
The bits within the two control registers (for left and right channel) are identical. Use common names for the bits acros the two register. Also add the missing definition for the path selection bit. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: da7210: convert to soc-cacheAxel Lin1-78/+45
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: Remove impossible case from wm8994_hw_paramsAxel Lin1-10/+0
We set hw_params callback for wm8994_aif3_dai_ops to wm8994_aif3_hw_params. Thus no need to check wm8994-aif3 in wm8994_hw_params. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: Delete ads117x.hAxel Lin1-13/+0
This is not required after multi-component patch. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-12ASoC: ak4642: convert to soc-cacheAxel Lin1-70/+12
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Instantiate card widgets immediatelyMark Brown1-0/+2
This ensures they are available prior to the card late_probe(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Implement WM5100 accessory detection supportMark Brown2-0/+164
The WM5100 includes an advanced, low power, accessory detect subsystem capable of detecting both accessory presence and button presses while the device is in an ultra low power mode. Implement initial support for this. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Add missing default for WM5100 Clocking 1Mark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Fix typo in Kconfig symbol for tlv320aic32x4Wolfram Sang3-4/+4
It is currently named "TVL" instead of "TLV". Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Javier Martin <javier.martin@vista-silicon.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: tlv320dac33: Convert to table based initPeter Ujfalusi1-16/+7
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: twl4030: Convert to table based initPeter Ujfalusi1-14/+7
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: twl6040: Convert to table based initPeter Ujfalusi1-21/+10
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Writing register default value for the reset registerAxel Lin1-1/+1
The WM8983 can be reset by performing a write of any value to the software reset register. To avoid writing to the software reset register while resume, we should write the same value in wm8983_reg_defs to software reset register in wm8983_probe(). The write to the reset register is suppressed by the cache restore code when it skips writes of default registers. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-11ASoC: Convert Goni to data based DAPM initMark Brown1-8/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
2011-10-10ASoC: sdp3430: Let core to deal with the DAPM widgetsPeter Ujfalusi1-9/+5
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: osk5912: Let core to deal with the DAPM widgetsPeter Ujfalusi1-20/+5
Pass the DAPM widgets/routes via the snd_soc_card struct to core. With this change we do not need the init function since the remaining snd_soc_dapm_enable_pin calls are not needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: n810: Let the core to register DAPM widgets/routes and controlsPeter Ujfalusi1-13/+8
Pass the DAPM widgets/routes and static controls via the snd_soc_card struct to core. In this way the machine driver does not need to handle the DAPM widgets/routes. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: am3517evm: Let core to deal with the DAPM widgetsPeter Ujfalusi1-21/+5
Pass the DAPM widgets/routes via the snd_soc_card struct to core. With this change we do not need the init function since the remaining snd_soc_dapm_enable_pin calls are not needed. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: sdp4430: No need to call dapm_pin_enable at init timePeter Ujfalusi1-9/+0
Widgets are connected by default. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: sdp4430: Let core to deal with the DAPM widgetsPeter Ujfalusi1-9/+5
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: zoom2: No need to call dapm_pin_enable at init timePeter Ujfalusi1-7/+0
Widgets are connected by default. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: zoom2: Let core to deal with the DAPM widgetsPeter Ujfalusi1-10/+5
Pass the DAPM widgets/routes via the snd_soc_card struct to core. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: OMAP machines: Remove soc_dapm_sync() call from initPeter Ujfalusi9-29/+4
No need to call soc_dapm_sync at init time. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Anuj Aggarwal <anuj.aggarwal@ti.com> Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: GraÅžvydas Ignotas <notasas@gmail.com> Cc: Misael Lopez Cruz <misael.lopez@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: Convert Jive to table based initMark Brown1-11/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-10-10ASoC: Convert SMDK WM8580 to table based DAPM initMark Brown1-32/+7
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-10-10ASoC: Convert SmartQ to table based initMark Brown1-14/+7
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-10-10ASoC: Convert RX1950 to table based initMark Brown1-20/+11
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-10-10ASoC: Convert H1940 to table based initMark Brown1-12/+5
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Sangbeom Kim <sbkim73@samsung.com>
2011-10-10ASoC: Convert Simtec machines to table based DAPM initMark Brown2-10/+10
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: fix checkpatch.pl error in omap-mcbspMichael Opdenacker1-2/+1
Signed-off-by: Michael Opdenacker <michael.opdenacker@linaro.org> Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: ak4535: convert to soc-cacheAxel Lin1-82/+18
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8988: Convert to snd_soc_cache_syncAxel Lin1-15/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8974: Convert to snd_soc_cache_syncAxel Lin1-11/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8971: Convert to snd_soc_cache_syncAxel Lin1-12/+3
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8960: Convert to snd_soc_cache_syncAxel Lin1-10/+5
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8940: Convert to snd_soc_cache_syncAxel Lin1-24/+22
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8776: Convert to snd_soc_cache_syncAxel Lin1-14/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8750: Convert to snd_soc_cache_syncAxel Lin1-14/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8731: Convert to snd_soc_cache_syncAxel Lin1-13/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8711: Convert to snd_soc_cache_syncAxel Lin1-12/+3
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: wm8510: Convert to snd_soc_cache_syncAxel Lin1-11/+2
Convert to snd_soc_cache_sync for sync reg_cache with the hardware. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-10ASoC: Fix DAPM sync for TLV320AIC3x custom DAPM widgetMark Brown3-1/+9
We really should be doing this in the core, not in a driver... Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
2011-10-09ASoC: Squash error codes from regmap down to -1 on readMark Brown1-1/+1
The ASoC code always uses -1 as the error code due to reporting errors in band with the value. Ensure we don't confuse anything by making sure we don't pass actual error codes back into the rest of the code on read. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-09ASoC: Cache connected input and output recursionsMark Brown2-15/+47
The number of connected input and output endpoints for a given widgets can't change during a DAPM run so there is no need to redo the recursion through branches of the tree we've already visited. Doing this on one of my test systems gives an improvement of: Power Path Neighbour Before: 63 607 731 After: 63 141 181 which scales up well as more widgets are involved in paths. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-08ASoC: Assign power_check when we allocate DAPM widgetsMark Brown1-28/+39
This ensures none of the rest of the code ever encounters a widget which does not have a power check function. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-08ASoC: Ensure all DAPM widgets are instantiated with the cardMark Brown1-0/+2
Specifically for the widgets added by machine driver late probe functions. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-08ASoC: Remove redundant snd_soc_dapm_sync() calls from machine driversMark Brown31-73/+0
The core will sync DAPM as part of the card initialization, there is no need for machine drivers to do so during their setup. OMAP drivers are omitted as I know Peter already has patches for them. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 18:19:57 +0300