summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-14arm64: dts: imx8mm-beacon: Enable overdrive modeAdam Ford1-0/+2
The SoC runs at a high enough voltage to support overdrive mode, so include the imx8mm-overdrive.dtsi file to increase the VPU and GPU clocks to their overdrive speeds. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm: Add optional overdrive DTSIAdam Ford1-0/+29
For boards who run their SoC at a higher voltage than nominal, the boards can run several clocks at an overdrive rate for better performance. Add an optional DTSI file which can be included by various boards to run in overdrive mode. This raises the GPU PLL to 1000MHz, and the VPU PLL to 700MHz while moving VPU_G1 and VPU_H1 to the SYS_PLL3_OUT which runs at 750MHz. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx8mm: Reduce GPU to nominal speedAdam Ford1-2/+2
When the GPU nodes were added, the GPU_PLL_OUT was configured for 1000MHz, but this requires the SoC to run in overdrive mode which requires an elevated voltage operating point. Since this may run some boards out of spec, the default clock should be set to 800MHz for nominal operating mode. Boards that run at the higher voltage can update their clocks accordingly. Fixes: 4523be8e46be ("arm64: dts: imx8mm: Add GPU nodes for 2D and 3D core") Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14arm64: dts: imx93: Fix the micfil clock-names entriesFabio Estevam1-4/+2
fsl,micfil.yaml defines the clock-names in the following sequence: clock-names: items: - const: ipg_clk - const: ipg_clk_app - const: pll8k - const: pll11k - const: clkext3 minItems: 2 imx93.dtsi currently misses the 'pll11k' entry and jump to 'clkext3'. This leads to the following dt-schema warning: imx93-11x11-evk.dtb: micfil@44520000: clock-names:3: 'pll11k' was expected from schema $id: http://devicetree.org/schemas/sound/fsl,micfil.yaml# Fix the warning by describing the clocks up to 'pll8k' as 'clkext3' is assigned to a dummy clock. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx23/28: Fix the DMA controller node nameFabio Estevam2-2/+2
Per fsl,mxs-dma.yaml, the node name should be 'dma-controller'. Change it to fix the following dt-schema warning. imx28-apf28.dtb: dma-apbx@80024000: $nodename:0: 'dma-apbx@80024000' does not match '^dma-controller(@.*)?$' from schema $id: http://devicetree.org/schemas/dma/fsl,mxs-dma.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx23-sansa: Use preferred i2c-gpios propertiesFabio Estevam1-8/+4
The 'gpios' property to describe the SDA and SCL GPIOs is considered deprecated according to i2c-gpio.yaml. Switch to the preferred 'sda-gpios' and 'scl-gpios' properties. This fixes the following schema warnings: imx23-sansa.dtb: i2c-0: 'sda-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# imx23-sansa.dtb: i2c-0: 'scl-gpios' is a required property from schema $id: http://devicetree.org/schemas/i2c/i2c-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx27-apf27dev: Fix LED nameFabio Estevam1-1/+1
Per leds-gpio.yaml, the led names should start with 'led'. Change it to fix the following dt-schema warning: imx27-apf27dev.dtb: leds: 'user' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/leds/leds-gpio.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25/27: Pass timing0Fabio Estevam8-8/+8
Per display-timings.yaml, the 'timing' pattern should be used to describe the display timings. Change it accordingly to fix the following dt-schema warning: imx27-apf27dev.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/display/panel/display-timings.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-14ARM: dts: imx25: Fix the iim compatible stringFabio Estevam1-1/+1
Per imx-iim.yaml, the compatible string should only contain a single entry. Use it as "fsl,imx25-iim" to fix the following dt-schema warning: imx25-karo-tx25.dtb: efuse@53ff0000: compatible: ['fsl,imx25-iim', 'fsl,imx27-iim'] is too long from schema $id: http://devicetree.org/schemas/nvmem/imx-iim.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: renesas: white-hawk-cpu: Fix missing serial console pin controlGeert Uytterhoeven1-0/+3
The pin control description for the serial console was added, but not enabled, due to missing pinctrl properties in the serial port device node. Fixes: 7a8d590de8132853 ("arm64: dts: renesas: white-hawk-cpu: Add serial port pin control") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/8a51516581cd71ecbfa174af9c7cebad1fc83c5b.1702459865.git.geert+renesas@glider.be
2023-12-13arm64: dts: renesas: rzg3s-smarc-som: Enable the Ethernet interfacesClaudiu Beznea1-1/+140
The RZ/G3S Smarc Module has Ethernet PHYs (KSZ9131) connected to each Ethernet IP. For this, add proper DT descriptions to enable Ethernet communication through these PHYs. The interface b/w PHYs and MACs is RGMII. The skew settings were set to zero as based on phy-mode (rgmii-id) the KSZ9131 driver enables internal DLL, which adds a 2ns delay b/w clocks (TX/RX) and data signals. Different pin settings were applied to TXC and TX_CTL compared with the rest of the RGMII pins to comply with requirements for these pins imposed by HW manual of RZ/G3S (see chapters "Ether Ch0 Voltage Mode Control Register (ETH0_POC)", "Ether Ch1 Voltage Mode Control Register (ETH1_POC)", for power source selection, "Ether MII/RGMII Mode Control Register (ETH_MODE)" for output-enable and "Input Enable Control Register (IEN_m)" for input-enable configurations). Also enable the Ethernet interfaces by selecting SW_CONFIG3 = SW_ON. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231207070700.4156557-12-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-12-13arm64: dts: renesas: rzg3s-smarc-som: Use switches' names to select on-board ↵Claudiu Beznea1-13/+21
functionalities The intention of the SW_SD0_DEV_SEL and SW_SD2_EN macros was to reflect the state of the SW_CONFIG individual switches available on the RZ/G3S Smarc Module, and at the same time to have a descriptive name for the switches themselves. Each individual switch is associated with a signal name, which might be active-low or not on the board. Using signal names instead of SW_CONFIG switch names may be confusing for a user who just playes with switches to select individual functionalities, but also for an advanced user who looks at the schematics. To avoid even further confusion, use the switches' names here and instantiate them with an ON/OFF state. This should be simpler, even though the name of the switches is not that intuitive. The switches' names documentation reflects the switches' purposes. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231207070700.4156557-11-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-12-13arm64: dts: renesas: r9a08g045: Add Ethernet nodesClaudiu Beznea1-0/+38
Add the Ethernet nodes available on RZ/G3S (R9A08G045). Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231207070700.4156557-10-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-12-13arm64: dts: renesas: r9a08g045: Add IA55 interrupt controller nodeClaudiu Beznea1-0/+68
Add IA55 interrupt controller node and set it as interrupt parent for pin controller. Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20231120111820.87398-10-claudiu.beznea.uj@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2023-12-13ARM: dts: imx25: Move usbphy nodes out of simple-busFabio Estevam1-18/+10
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx1-apf9328.dtb: aipi@200000: $nodename:0: 'aipi@200000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-rdk: Move usbphy nodes out of simple-busFabio Estevam2-22/+13
The USB PHY nodes should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-pdk: Move usbphy0 out of simple-busFabio Estevam1-12/+6
The USB PHY should not be described under 'simple-bus'. Move it out of simple-bus. Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for EMI busFabio Estevam1-1/+1
Per simple-bus.yaml, 'emi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx25-pdk.dtb: emi@80000000: $nodename:0: 'emi@80000000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Use 'bus' for AIPI busFabio Estevam1-2/+2
Per simple-bus.yaml, 'aipi' is not a valid node name. Change it to 'bus' to fix the following dt-schema warning: imx27-pdk.dtb: aipi@10020000: $nodename:0: 'aipi@10020000' does not match '^([a-z][a-z0-9\\-]+-bus|bus|localbus|soc|axi|ahb|apb)(@.+)?$' from schema $id: http://devicetree.org/schemas/simple-bus.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: add fsl-lx2160a-mblx2160a boardGregor Herburger8-0/+658
Add the different serdes configurations as overlays. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13dt-bindings: arm: fsl: Add TQ-Systems LX2160A based boardsGregor Herburger1-0/+10
TQMLX2160A is a TQ-Systems GmbH SoM using the LX2160A SoC. MBLX2160a is the starterkit baseboard for TQMLX2160A. Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27-phytec-phycore-som: Use the mux- prefixFabio Estevam1-2/+2
According to Documentation/devicetree/bindings/sound/imx-audmux.yaml, there must be a "mux-" prefix in the audmux port nodes. Add the "mux-" prefix to avoid the following dt-schema warning: imx27-phytec-phycore-rdk.dtb: audmux@10016000: 'pins4', 'ssi0' do not match any of the regexes: '^mux-[0-9a-z]*$', 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/sound/imx-audmux.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx1: Fix sram nodeFabio Estevam1-1/+4
Per sram.yaml, address-cells, size-cells and ranges are mandatory. The node name should be sram. Change the node name and pass the required properties to fix the following dt-schema warnings: imx1-apf9328.dtb: esram@300000: $nodename:0: 'esram@300000' does not match '^sram(@.*)?' from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#address-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: '#size-cells' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# imx1-apf9328.dtb: esram@300000: 'ranges' is a required property from schema $id: http://devicetree.org/schemas/sram/sram.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx27: Fix sram nodeFabio Estevam1-0/+3
Per sram.yaml, address-cells, size-cells and ranges are mandatory. Pass them to fix the following dt-schema warnings: Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx: Use flash@0,0 patternFabio Estevam4-4/+4
Per mtd-physmap.yaml, 'nor@0,0' is not a valid node pattern. Change it to 'flash@0,0' to fix the following dt-schema warning: imx1-ads.dtb: nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$' from schema $id: http://devicetree.org/schemas/mtd/mtd-physmap.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25/27-eukrea: Fix RTC node nameFabio Estevam2-2/+2
Node names should be generic. Use 'rtc' as node name to fix the following dt-schema warning: imx25-eukrea-mbimxsd25-baseboard.dtb: pcf8563@51: $nodename:0: 'pcf8563@51' does not match '^rtc(@.*|-([0-9]|[1-9][0-9]+))?$' from schema $id: http://devicetree.org/schemas/rtc/nxp,pcf8563.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25-pdk: Pass #sound-dai-cellsFabio Estevam1-0/+1
Per sgtl5000.yaml, '#sound-dai-cells' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: sgtl5000@a: '#sound-dai-cells' is a required property from schema $id: http://devicetree.org/schemas/sound/sgtl5000.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13ARM: dts: imx25: Pass I2C clock-names propertyFabio Estevam1-3/+3
Per i2c-imx.yaml, 'clock-names' is a required property. Pass it to fix the following dt-schema warning: imx25-pdk.dtb: i2c@43f80000: clock-names:0: 'ipg' was expected from schema $id: http://devicetree.org/schemas/i2c/i2c-imx.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: freescale: imx93: add i3c1 and i3c2Frank Li1-0/+26
Add I3C1 and I3C2. Signed-off-by: Frank Li <Frank.Li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-13arm64: dts: ls1012a: Remove big-endian from thermalFabio Estevam1-1/+0
Per qoriq-thermal.yaml, 'big-endian' is not a valid property. When the 'little-endian' property is absent, the default is big endian. Remove it to fix the following schema warning: tmu@1f00000: 'big-endian' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml# Signed-off-by: Fabio Estevam <festevam@denx.de> Acked-by: Li Yang <leoyang.li@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2023-12-12arm64: dts: rockchip: Add Anbernic RG351VChris Morgan2-0/+45
Add support for the Anbernic RG351V, which is a handheld gaming console from Anbernic with an RK3326 SoC, a 640x480 LCD display, a single analog joystick with several face buttons, two USB C ports, and internal WiFi over USB. All hardware has been tested as working except for the battery, which will require further modification to the mainline rk817 battery driver before it can be used (the device was built without a shunt resistor, and as such the battery cannot measure current; only voltage). Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20231120230131.57705-4-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Split RG351M from Odroid Go AdvanceChris Morgan2-16/+480
Split the RG351M into its own DTSI file. The RG351M, unlike the Odroid Go Advance, has no ADC joysticks, no GPIO buttons (except for volume on the RG351V), a PWM vibrator that interferes with an Odroid regulator, and different LEDs. Split the RG351M into a DTSI file that can then be imported into the DTS files for the RG351M and a new RG351V. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20231120230131.57705-3-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12dt-bindings: arm: rockchip: Add Anbernic RG351VChris Morgan1-2/+4
The Anbernic RG351V is a portable gaming console from Anbernic with the RK3326 SoC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231120230131.57705-2-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3588(S) boardsDragan Simic4-0/+4
Add ethernet0 alias to the board dts files for a few supported RK3588 and RK3588S boards that had it missing. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/9af2026bf8a5538aff627381289cb06f2fab4263.1702368023.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Add ethernet0 alias to the dts for RK3566 boardsDragan Simic6-1/+14
Add ethernet0 alias to the board dts files for a few supported RK3566 boards that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to the dependent board dts files, which actually enable the GMAC. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for PX30Dragan Simic4-1/+3
Not all supported boards actually use the PX30's built-in (G)MAC, while the SoC TRM and the datasheet don't define some standard numbering in this case. Thus, remove the ethernet0 alias from the PX30 SoC dtsi file, and add the same alias back to the appropriate board dts(i) files. This is quite similar to the already performed migration of the mmcX aliases from the Rockchip SoC dtsi files to the board dts(i) files. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/0d9da8959b4f567622676c34b5feb74c49489554.1702366958.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Remove ethernetX aliases from the SoC dtsi for RK3328Dragan Simic9-2/+9
Not all supported boards actually use the RK3328's built-in GMACs, while the SoC TRM and the datasheet don't define some standard numbering in this case. Thus, remove the ethernet0 and ethernet1 aliases from the RK3328 SoC dtsi file, and add the same alias back to the appropriate board dts(i) files. These changes also touch one RK3318-based board dts, because it actually depends on the RK3328 SoC dtsi and enables one of the GMACs. This is quite similar to the already performed migration of the mmcX aliases from the Rockchip SoC dtsi files to the board dts(i) files. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/0c14f2e354d32f5d45c718ce16643553ca72f6a5.1702366958.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3368Dragan Simic6-1/+5
Not all supported boards actually use the RK3368's built-in GMAC, while the SoC TRM and the datasheet don't define some standard numbering in this case. Thus, remove the ethernet0 alias from the RK3368 SoC dtsi file, and add the same alias back to the appropriate board dts(i) files. This is quite similar to the already performed migration of the mmcX aliases from the Rockchip SoC dtsi files to the board dts(i) files. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/77115184d633190c917d868f883070e100d93dbc.1702366958.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Remove ethernet0 alias from the SoC dtsi for RK3399Dragan Simic19-1/+27
Not all supported boards actually use the RK3399's built-in GMAC, while the SoC TRM and the datasheet don't define some standard numbering in this case. Thus, remove the ethernet0 alias from the RK3399 SoC dtsi file, and add the same alias back to the appropriate board dts(i) files. This is quite similar to the already performed migration of the mmcX aliases from the Rockchip SoC dtsi files to the board dts(i) files. Signed-off-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20879826c01fb9ead71c339866846ea794669802.1702366958.git.dsimic@manjaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: make dts use gpio-fan matrix instead of arrayDavid Heidelberg2-3/+4
No functional changes. Adjust to comply with dt-schema requirements and make possible to validate values. Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: David Heidelberg <david@ixit.cz> Link: https://lore.kernel.org/r/20231209171653.85468-2-david@ixit.cz Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: add gpio alias for gpio dt nodesJohan Jonker4-0/+18
Rockchip SoC TRM, SoC datasheet and board schematics always refer to the same gpio numbers - even if not all are used for a specific board. In order to not have to re-define them for every board add the aliases to SoC dtsi files. Co-developed-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com> Signed-off-by: Johan Jonker <jbx6244@gmail.com> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/56daeead-1d35-44bb-00c0-614b84a986de@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: Add dynamic-power-coefficient to rk3399 GPULukasz Luba1-0/+1
Add dynamic-power-coefficient to the GPU node. That will create Energy Model for the GPU based on the coefficient and OPP table information. It will enable mechanism such as DTMP or IPA to work with the GPU DVFS. In similar way the Energy Model for CPUs in rk3399 is created, so both are aligned in power scale. The maximum power used from this coefficient is 1.5W at 600MHz. Signed-off-by: Lukasz Luba <lukasz.luba@arm.com> Link: https://lore.kernel.org/r/20231127081511.1911706-1-lukasz.luba@arm.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2023-12-12arm64: dts: rockchip: add rk3588 spi aliases to soc dtsiHeiko Stuebner1-0/+5
The spi controllers on rk3588 are named spi0 - spi4. Board schematics also use these exact numbers and we want those names to also reflect in the OS devices because everything else would just cause confusion. Userspace spi access is a thing afterall. To prevent each board repeating their list of spi aliases, define them in the soc dtsi, as previous Rockchip soc like the rk356x do already. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20231205164842.556684-5-heiko@sntech.de
2023-12-12arm64: dts: rockchip: add rk3588 gpio aliases to soc dtsiHeiko Stuebner1-0/+5
The gpio controllers on rk3588 are named gpio0 - gpio4. Board schematics also use these exact numbers and we want those names to also reflect in the OS devices because everything else would just cause confusion. Userspace gpio access is a thing afterall. To prevent each board repeating their list of gpio aliases, define them in the soc dtsi, as previous Rockchip soc like the rk356x do already. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20231205164842.556684-4-heiko@sntech.de
2023-12-12arm64: dts: rockchip: add rk3588 i2c aliases to soc dtsiHeiko Stuebner1-0/+9
The i2c controllers on rk3588 are named i2c0 - i2c8. Board schematics also use these exact numbers and we want those names to also reflect in the OS devices because everything else would just cause confusion. Userspace i2c access is a thing afterall. To prevent each board repeating their list of i2c aliases, define them in the soc dtsi, as all previous Rockchip soc do already. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20231205164842.556684-3-heiko@sntech.de
2023-12-12arm64: dts: rockchip: move rk3588 serial aliases to soc dtsiHeiko Stuebner13-19/+13
The serial ports on rk3588 are named uart0 - uart9. Board schematics also use these exact numbers and we want those names to also reflect in the OS devices because everything else would just cause confusion. To prevent each board repeating their list of serial aliases, move them to the soc dtsi, as all previous Rockchip soc do already. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> Link: https://lore.kernel.org/r/20231205164842.556684-2-heiko@sntech.de
2023-12-12arm64: dts: rockchip: add Theobroma Jaguar SBCHeiko Stuebner2-0/+804
Add a board dts for the Jaguar SBC from Theobroma-Systems JAGUAR is a Single-Board Computer (SBC) based around the rk3588 SoC and is targeting Autonomous Mobile Robots (AMR). It features: * LPDDR4X (up to 16GB) * 1Gbps Ethernet on RJ45 connector (KSZ9031 or KSZ9131) * PCIe 3.0 4-lane on M.2 M-key connector * PCIe 2.1 1-lane on M.2 E-key * USB 2.0 on M.2 E-key * 2x USB3 OTG type-c ports with DP Alt-Mode * USB2 host port * HDMI output * 2x camera connectors, each exposing: * 2-lane MIPI-CSI * 1v2, 1v8, 2v8 power rails * I2C bus * GPIOs * PPS input * CAN * RS485 UART * FAN connector * SD card slot * eMMC (up to 256GB) * RTC backup battery * Companion microcontroller * ISL1208 RTC emulation * AMC6821 PWM emulation * On/off buzzer control * Secure Element * 80-pin Mezzanine connector for daughterboards: * GPIOs * 1Gbps Ethernet * PCIe 2.1 1-lane * 2x 2-lane MIPI-CSI * ADC channel * I2C bus * PWM * UART * SPI * SDIO * CAN * I2S * 1v8, 3v3, 5v0, dc-in (12-24V) power rails Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Link: https://lore.kernel.org/r/20231201191103.343097-3-heiko@sntech.de
2023-12-12dt-bindings: arm: rockchip: Add Theobroma-Systems Jaguar SBCHeiko Stuebner1-0/+5
Add the binding for the Jaguar board from Theobroma-Systems. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Acked-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20231201191103.343097-2-heiko@sntech.de
2023-12-12arm64: dts: rockchip: Add Powkiddy X55Chris Morgan2-0/+927
Add support for the Powkiddy X55. The Powkiddy X55 is a handheld gaming device with a 720p 5.5 inch screen powered by the Rockchip RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC joysticks powered by 4 dedicated ADC channels, and several GPIO face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an 8GB internal eMMC. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20231204185719.569021-11-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 08:19:35 +0300