summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-04-18ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include filesCorey Minyard2-23/+23
Convert over to struct ipmi_user * and struct ipmi_smi *. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: ipmi_unregister_smi() cannot fail, have it return voidCorey Minyard4-11/+4
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_devintf: Add an error return on invalid ioctlsCorey Minyard1-0/+4
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove usecount function from interfacesCorey Minyard1-9/+0
All the users are now gone. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Remove usecount handlingCorey Minyard1-21/+0
Now that we can handle hot remove there is no need for usecounts for interfaces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Remove condition on interface shutdownCorey Minyard1-2/+1
Now that the interfaces have shutdown handlers, this no longer needs to be conditional. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_ssif: Convert over to a shutdown handlerCorey Minyard1-24/+31
Move the shutdown handling to a shutdown function called from the IPMI core code. That makes for a cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_si: Convert over to a shutdown handlerCorey Minyard1-13/+18
Move the shutdown handling to a shutdown function called from the IPMI core code. That makes for a cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rework locking and shutdown for hot removeCorey Minyard1-210/+280
To handle hot remove of interfaces, a lot of rework had to be done to the locking. Several things were switched over to srcu and shutdown for users and interfaces was added for cleaner shutdown. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Fix some counter issuesCorey Minyard1-31/+45
Counters would not be pegged properly on some errors. Have deliver_response() return an error so the counters can be incremented properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Change ipmi_smi_t to struct ipmi_smi *Corey Minyard3-95/+99
Get rid of this coding style violation in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Rename ipmi_user_t to struct ipmi_user *Corey Minyard4-47/+47
Get rid of that non-compliance in the user files. Include files will come later. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add shutdown functions for users and interfacesCorey Minyard2-0/+14
Since things that IPMI uses can be hot-swapped, the users and interfaces really need to be able to handle this. Add the functions so the users and interfaces can implement them, the actual function will be added after everything is ready. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi_devintf: Small lock reworkCorey Minyard1-55/+28
The mutex didn't really serve any useful purpose, from what I can tell, and it would just get in the way. So remove it. Removing that required a mutex around the default value setting and getting, so just use the receive mutex for that. Also pull the fasync stuff outside of the lock for adding the data to the queue, since it didn't need to be there. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up some style issues in the message handlerCorey Minyard1-48/+35
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Break up i_ipmi_requestCorey Minyard1-310/+344
It was huge, and easily broken into pieces. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up comments in include files.Corey Minyard2-86/+134
Make the comments correct and consistent. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi:devintf: Clean up some coding style issuesCorey Minyard1-22/+18
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Clean up some debug codeCorey Minyard1-33/+25
Replace ifdefs in the code with a simple function. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi:watchdog: Use the IPMI panic handler instead of the system oneCorey Minyard1-37/+23
This is a cleaner interface and the main IPMI panic handler does setup required by the watchdog handler. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a panic handler for IPMI usersCorey Minyard2-110/+110
Users of the IPMI code had their own panic handlers, but the order was not necessarily right, the base IPMI code would need to handle the panic first, and the user had no way to know if the IPMI interface could run at panic time. Add a panic handler to the user interface, it is called if non-NULL and the interface the user is on is capable of panic handling. It also cleans up the panic log handling a bit to reuse the existing interface loop in the main panic handler. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi:watchdog: Replace printk() with pr_xxx()Corey Minyard1-30/+20
And clean broken strings. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi:watchdog: Rework locking and handlingCorey Minyard1-155/+140
Simplify things by creating one set of message handling data for setting the watchdog and doing a heartbeat. Rework the locking to avoid some (probably not very important) races and to avoid a fairly unlikely infinite recursion. Get rid of ipmi_ignore_heartbeat, it wasn't used, and use watchdog_user to tell if we have a working IPMI device below us. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a maintenance mode for IPMB messagesCorey Minyard1-0/+28
If you send a command to another BMC that might take some extra time, increase the timeouts temporarily. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18ipmi: Add a way to tune some timeoutsCorey Minyard1-32/+48
By default the retry timeout is 1 second. Allow that to be modified, primarily for slow operations, like firmware writes. Also, the timeout was driven by a 1 second timer, so 1 second really meant between 0 and 1 second. Set the default to 2 seconds so it means between 1 and 2 seconds. Also allow the time the interface automatically stays in mainenance mode to be modified from it's default 30 seconds. Also consolidate some of the timeout and retry setup. Signed-off-by: Corey Minyard <cminyard@mvista.com> more
2018-04-17Merge branch 'parisc-4.17-3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc build fix from Helge Deller: "Fix build error because of missing binfmt_elf32.o file which is still mentioned in the Makefile" * 'parisc-4.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Fix missing binfmt_elf32.o build error
2018-04-16Merge branch 'timers-core-for-linus' of ↵Linus Torvalds6-11/+279
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull missed timer updates from Thomas Gleixner: "This is a branch which got forgotten during the merge window, but it contains only fixes and hardware enablement. No fundamental changes. - Various fixes for the imx-tpm clocksource driver - A new timer driver for the NCPM7xx SoC family" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource/drivers/imx-tpm: Add different counter width support clocksource/drivers/imx-tpm: Correct some registers operation flow clocksource/drivers/imx-tpm: Fix typo of clock name dt-bindings: timer: tpm: fix typo of clock name clocksource/drivers/npcm: Add NPCM7xx timer driver dt-binding: timer: document NPCM7xx timer DT bindings
2018-04-16Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds11-73/+1081
Pull kvm fixes from Paolo Bonzini: "Bug fixes, plus a new test case and the associated infrastructure for writing nested virtualization tests" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: kvm: selftests: add vmx_tsc_adjust_test kvm: x86: move MSR_IA32_TSC handling to x86.c X86/KVM: Properly update 'tsc_offset' to represent the running guest kvm: selftests: add -std=gnu99 cflags x86: Add check for APIC access address for vmentry of L2 guests KVM: X86: fix incorrect reference of trace_kvm_pi_irte_update X86/KVM: Do not allow DISABLE_EXITS_MWAIT when LAPIC ARAT is not available kvm: selftests: fix spelling mistake: "divisable" and "divisible" X86/VMX: Disable VMX preemption timer if MWAIT is not intercepted
2018-04-16x86/ldt: Fix support_pte_mask filtering in map_ldt_struct()Joerg Roedel1-1/+1
The |= operator will let us end up with an invalid PTE. Use the correct &= instead. [ The bug was also independently reported by Shuah Khan ] Fixes: fb43d6cb91ef ('x86/mm: Do not auto-massage page protections') Acked-by: Andy Lutomirski <luto@kernel.org> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-16kvm: selftests: add vmx_tsc_adjust_testPaolo Bonzini6-13/+991
The test checks the behavior of setting MSR_IA32_TSC in a nested guest, and the TSC_OFFSET VMCS field in general. It also introduces the testing infrastructure for Intel nested virtualization. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-16kvm: x86: move MSR_IA32_TSC handling to x86.cPaolo Bonzini3-29/+6
This is not specific to Intel/AMD anymore. The TSC offset is available in vcpu->arch.tsc_offset. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-16X86/KVM: Properly update 'tsc_offset' to represent the running guestKarimAllah Ahmed4-22/+56
Update 'tsc_offset' on vmentry/vmexit of L2 guests to ensure that it always captures the TSC_OFFSET of the running guest whether it is the L1 or L2 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Reviewed-by: Jim Mattson <jmattson@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> [AMD changes, fix update_ia32_tsc_adjust_msr. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-04-16Linux 4.17-rc1Linus Torvalds1-2/+2
2018-04-16Merge tag 'for-4.17-part2-tag' of ↵Linus Torvalds94-1234/+277
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull more btrfs updates from David Sterba: "We have queued a few more fixes (error handling, log replay, softlockup) and the rest is SPDX updates that touche almost all files so the diffstat is long" * tag 'for-4.17-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Only check first key for committed tree blocks btrfs: add SPDX header to Kconfig btrfs: replace GPL boilerplate by SPDX -- sources btrfs: replace GPL boilerplate by SPDX -- headers Btrfs: fix loss of prealloc extents past i_size after fsync log replay Btrfs: clean up resources during umount after trans is aborted btrfs: Fix possible softlock on single core machines Btrfs: bail out on error during replay_dir_deletes Btrfs: fix NULL pointer dereference in log_dir_items
2018-04-16Merge tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds13-71/+240
Pull cifs fixes from Steve French: "SMB3 fixes, a few for stable, and some important cleanup work from Ronnie of the smb3 transport code" * tag '4.17-rc1SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: change validate_buf to validate_iov cifs: remove rfc1002 hardcoded constants from cifs_discard_remaining_data() cifs: Change SMB2_open to return an iov for the error parameter cifs: add resp_buf_size to the mid_q_entry structure smb3.11: replace a 4 with server->vals->header_preamble_size cifs: replace a 4 with server->vals->header_preamble_size cifs: add pdu_size to the TCP_Server_Info structure SMB311: Improve checking of negotiate security contexts SMB3: Fix length checking of SMB3.11 negotiate request CIFS: add ONCE flag for cifs_dbg type cifs: Use ULL suffix for 64-bit constant SMB3: Log at least once if tree connect fails during reconnect cifs: smb2pdu: Fix potential NULL pointer dereference
2018-04-16Merge tag 'scsi-fixes' of ↵Linus Torvalds18-82/+109
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of minor (and safe changes) that didn't make the initial pull request plus some bug fixes. The status handling code is actually a running regression from the previous merge window which had an incomplete fix (now reverted) and most of the remaining bug fixes are for problems older than the current merge window" [ Side note: this merge also takes the base kernel git repository to 6+ million objects for the first time. Technically we hit it a couple of merges ago already if you count all the tag objects, but now it reaches 6M+ objects reachable from HEAD. I was joking around that that's when I should switch to 5.0, because 3.0 happened at the 2M mark, and 4.0 happened at 4M objects. But probably not, even if numerology is about as good a reason as any. - Linus ] * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: devinfo: Add Microsoft iSCSI target to 1024 sector blacklist scsi: cxgb4i: silence overflow warning in t4_uld_rx_handler() scsi: dpt_i2o: Use after free in I2ORESETCMD ioctl scsi: core: Make scsi_result_to_blk_status() recognize CONDITION MET scsi: core: Rename __scsi_error_from_host_byte() into scsi_result_to_blk_status() Revert "scsi: core: return BLK_STS_OK for DID_OK in __scsi_error_from_host_byte()" scsi: aacraid: Insure command thread is not recursively stopped scsi: qla2xxx: Correct setting of SAM_STAT_CHECK_CONDITION scsi: qla2xxx: correctly shift host byte scsi: qla2xxx: Fix race condition between iocb timeout and initialisation scsi: qla2xxx: Avoid double completion of abort command scsi: qla2xxx: Fix small memory leak in qla2x00_probe_one on probe failure scsi: scsi_dh: Don't look for NULL devices handlers by name scsi: core: remove redundant assignment to shost->use_blk_mq
2018-04-16Merge tag 'kbuild-v4.17-2' of ↵Linus Torvalds41-5164/+316
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - pass HOSTLDFLAGS when compiling single .c host programs - build genksyms lexer and parser files instead of using shipped versions - rename *-asn1.[ch] to *.asn1.[ch] for suffix consistency - let the top .gitignore globally ignore artifacts generated by flex, bison, and asn1_compiler - let the top Makefile globally clean artifacts generated by flex, bison, and asn1_compiler - use safer .SECONDARY marker instead of .PRECIOUS to prevent intermediate files from being removed - support -fmacro-prefix-map option to make __FILE__ a relative path - fix # escaping to prepare for the future GNU Make release - clean up deb-pkg by using debian tools instead of handrolled source/changes generation - improve rpm-pkg portability by supporting kernel-install as a fallback of new-kernel-pkg - extend Kconfig listnewconfig target to provide more information * tag 'kbuild-v4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kconfig: extend output of 'listnewconfig' kbuild: rpm-pkg: use kernel-install as a fallback for new-kernel-pkg Kbuild: fix # escaping in .cmd files for future Make kbuild: deb-pkg: split generating packaging and build kbuild: use -fmacro-prefix-map to make __FILE__ a relative path kbuild: mark $(targets) as .SECONDARY and remove .PRECIOUS markers kbuild: rename *-asn1.[ch] to *.asn1.[ch] kbuild: clean up *-asn1.[ch] patterns from top-level Makefile .gitignore: move *-asn1.[ch] patterns to the top-level .gitignore kbuild: add %.dtb.S and %.dtb to 'targets' automatically kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically genksyms: generate lexer and parser during build instead of shipping kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile .gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore kbuild: use HOSTLDFLAGS for single .c executables
2018-04-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds33-802/+1150
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A set of fixes and updates for x86: - Address a swiotlb regression which was caused by the recent DMA rework and made driver fail because dma_direct_supported() returned false - Fix a signedness bug in the APIC ID validation which caused invalid APIC IDs to be detected as valid thereby bloating the CPU possible space. - Fix inconsisten config dependcy/select magic for the MFD_CS5535 driver. - Fix a corruption of the physical address space bits when encryption has reduced the address space and late cpuinfo updates overwrite the reduced bit information with the original value. - Dominiks syscall rework which consolidates the architecture specific syscall functions so all syscalls can be wrapped with the same macros. This allows to switch x86/64 to struct pt_regs based syscalls. Extend the clearing of user space controlled registers in the entry patch to the lower registers" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix signedness bug in APIC ID validity checks x86/cpu: Prevent cpuinfo_x86::x86_phys_bits adjustment corruption x86/olpc: Fix inconsistent MFD_CS5535 configuration swiotlb: Use dma_direct_supported() for swiotlb_ops syscalls/x86: Adapt syscall_wrapper.h to the new syscall stub naming convention syscalls/core, syscalls/x86: Rename struct pt_regs-based sys_*() to __x64_sys_*() syscalls/core, syscalls/x86: Clean up compat syscall stub naming convention syscalls/core, syscalls/x86: Clean up syscall stub naming convention syscalls/x86: Extend register clearing on syscall entry to lower registers syscalls/x86: Unconditionally enable 'struct pt_regs' based syscalls on x86_64 syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32 syscalls/core: Prepare CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y for compat syscalls syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls syscalls/core: Introduce CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y x86/syscalls: Don't pointlessly reload the system call number x86/mm: Fix documentation of module mapping range with 4-level paging x86/cpuid: Switch to 'static const' specifier
2018-04-15Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds22-105/+329
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 pti updates from Thomas Gleixner: "Another series of PTI related changes: - Remove the manual stack switch for user entries from the idtentry code. This debloats entry by 5k+ bytes of text. - Use the proper types for the asm/bootparam.h defines to prevent user space compile errors. - Use PAGE_GLOBAL for !PCID systems to gain back performance - Prevent setting of huge PUD/PMD entries when the entries are not leaf entries otherwise the entries to which the PUD/PMD points to and are populated get lost" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pgtable: Don't set huge PUD/PMD on non-leaf entries x86/pti: Leave kernel text global for !PCID x86/pti: Never implicitly clear _PAGE_GLOBAL for kernel image x86/pti: Enable global pages for shared areas x86/mm: Do not forbid _PAGE_RW before init for __ro_after_init x86/mm: Comment _PAGE_GLOBAL mystery x86/mm: Remove extra filtering in pageattr code x86/mm: Do not auto-massage page protections x86/espfix: Document use of _PAGE_GLOBAL x86/mm: Introduce "default" kernel PTE mask x86/mm: Undo double _PAGE_PSE clearing x86/mm: Factor out pageattr _PAGE_GLOBAL setting x86/entry/64: Drop idtentry's manual stack switch for user entries x86/uapi: Fix asm/bootparam.h userspace compilation errors
2018-04-15Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds7-14/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A few scheduler fixes: - Prevent a bogus warning vs. runqueue clock update flags in do_sched_rt_period_timer() - Simplify the helper functions which handle requests for skipping the runqueue clock updat. - Do not unlock the tunables mutex in the error path of the cpu frequency scheduler utils. Its not held. - Enforce proper alignement for 'struct util_est' in sched_avg to prevent a misalignment fault on IA64" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Force proper alignment of 'struct util_est' sched/core: Simplify helpers for rq clock update skip requests sched/rt: Fix rq->clock_update_flags < RQCF_ACT_SKIP warning sched/cpufreq/schedutil: Fix error path mutex unlock
2018-04-15Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds33-187/+629
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more perf updates from Thomas Gleixner: "A rather large set of perf updates: Kernel: - Fix various initialization issues - Prevent creating [ku]probes for not CAP_SYS_ADMIN users Tooling: - Show only failing syscalls with 'perf trace --failure' (Arnaldo Carvalho de Melo) e.g: See what 'openat' syscalls are failing: # perf trace --failure -e openat 762.323 ( 0.007 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video2) = -1 ENOENT No such file or directory <SNIP N /dev/videoN open attempts... sigh, where is that improvised camera lid?!? > 790.228 ( 0.008 ms): VideoCapture/4566 openat(dfd: CWD, filename: /dev/video63) = -1 ENOENT No such file or directory ^C# - Show information about the event (freq, nr_samples, total period/nr_events) in the annotate --tui and --stdio2 'perf annotate' output, similar to the first line in the 'perf report --tui', but just for the samples for a the annotated symbol (Arnaldo Carvalho de Melo) - Introduce 'perf version --build-options' to show what features were linked, aliased as well as a shorter 'perf -vv' (Jin Yao) - Add a "dso_size" sort order (Kim Phillips) - Remove redundant ')' in the tracepoint output in 'perf trace' (Changbin Du) - Synchronize x86's cpufeatures.h, no effect on toolss (Arnaldo Carvalho de Melo) - Show group details on the title line in the annotate browser and 'perf annotate --stdio2' output, so that the per-event columns can have headers (Arnaldo Carvalho de Melo) - Fixup vertical line separating metrics from instructions and cleaning unused lines at the bottom, both in the annotate TUI browser (Arnaldo Carvalho de Melo) - Remove duplicated 'samples' in lost samples warning in 'perf report' (Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing the perf build process, automagically adding support for the new DRM_I915_QUERY ioctl (Arnaldo Carvalho de Melo) - Make auxtrace_queues__add_buffer() allocate struct buffer, from a patchkit already applied (Adrian Hunter) - Fix the --stdio2/TUI annotate output to include group details, be it for a recorded '{a,b,f}' explicit event group or when forcing group display using 'perf report --group' for a set of events not recorded as a group (Arnaldo Carvalho de Melo) - Fix display artifacts in the ui browser (base class for the annotate and main report/top TUI browser) related to the extra title lines work (Arnaldo Carvalho de Melo) - perf auxtrace refactorings, leftovers from a previously partially processed patchset (Adrian Hunter) - Fix the builtin clang build (Sandipan Das, Arnaldo Carvalho de Melo) - Synchronize i915_drm.h, silencing a perf build warning and in the process automagically adding support for a new ioctl command (Arnaldo Carvalho de Melo) - Fix a strncpy issue in uprobe tracing" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (36 commits) perf/core: Need CAP_SYS_ADMIN to create k/uprobe with perf_event_open() tracing/uprobe_event: Fix strncpy corner case perf/core: Fix perf_uprobe_init() perf/core: Fix perf_kprobe_init() perf/core: Fix use-after-free in uprobe_perf_close() perf tests clang: Fix function name for clang IR test perf clang: Add support for recent clang versions perf tools: Fix perf builds with clang support perf tools: No need to include namespaces.h in util.h perf hists browser: Remove leftover from row returned from refresh perf hists browser: Show extra_title_lines in the 'D' debug hotkey perf auxtrace: Make auxtrace_queues__add_buffer() do CPU filtering tools headers uapi: Synchronize i915_drm.h perf report: Remove duplicated 'samples' in lost samples warning perf ui browser: Fixup cleaning unused lines at the bottom perf annotate browser: Fixup vertical line separating metrics from instructions perf annotate: Show group details on the title line perf auxtrace: Make auxtrace_queues__add_buffer() allocate struct buffer perf/x86/intel: Move regs->flags EXACT bit init perf trace: Remove redundant ')' ...
2018-04-15Merge branch 'efi-urgent-for-linus' of ↵Linus Torvalds1-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 EFI bootup fixlet from Thomas Gleixner: "A single fix for an early boot warning caused by invoking this_cpu_has() before SMP initialization" * 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix bogus warning during EFI bootup, use boot_cpu_has() instead of this_cpu_has() in build_cr3_noflush()
2018-04-15Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-56/+106
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq affinity fixes from Thomas Gleixner: - Fix error path handling in the affinity spreading code - Make affinity spreading smarter to avoid issues on systems which claim to have hotpluggable CPUs while in fact they can't hotplug anything. So instead of trying to spread the vectors (and thereby the associated device queues) to all possibe CPUs, spread them on all present CPUs first. If there are left over vectors after that first step they are spread among the possible, but not present CPUs which keeps the code backwards compatible for virtual decives and NVME which allocate a queue per possible CPU, but makes the spreading smarter for devices which have less queues than possible or present CPUs. * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq/affinity: Spread irq vectors among present CPUs as far as possible genirq/affinity: Allow irq spreading from a given starting point genirq/affinity: Move actual irq vector spreading into a helper function genirq/affinity: Rename *node_to_possible_cpumask as *node_to_cpumask genirq/affinity: Don't return with empty affinity masks on error
2018-04-15Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds1-2/+0
Pull OpenRISC fixlet from Stafford Horne: "Just one small thing here, it came in a while back but I didnt have anything in my 4.16 queue, still its the only thing for 4.17 so sending it alone. Small cleanup: remove unused __ARCH_HAVE_MMU define" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: remove unused __ARCH_HAVE_MMU define
2018-04-15Merge tag 'powerpc-4.17-2' of ↵Linus Torvalds10-40/+63
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when loading modules built with a different CONFIG_RELOCATABLE value by adding CONFIG_RELOCATABLE to vermagic. - Fix busy loops in the OPAL NVRAM driver if we get certain error conditions from firmware. - Remove tlbie trace points from KVM code that's called in real mode, because it causes crashes. - Fix checkstops caused by invalid tlbiel on Power9 Radix. - Ensure the set of CPU features we "know" are always enabled is actually the minimal set when we build with support for firmware supplied CPU features. Thanks to: Aneesh Kumar K.V, Anshuman Khandual, Nicholas Piggin. * tag 'powerpc-4.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Fix CPU_FTRS_ALWAYS vs DT CPU features powerpc/mm/radix: Fix checkstops caused by invalid tlbiel KVM: PPC: Book3S HV: trace_tlbie must not be called in realmode powerpc/8xx: Fix build with hugetlbfs enabled powerpc/powernv: Fix OPAL NVRAM driver OPAL_BUSY loops powerpc/powernv: define a standard delay for OPAL_BUSY type retry loops powerpc/fscr: Enable interrupts earlier before calling get_user() powerpc/64s: Fix section mismatch warnings from setup_rfi_flush() powerpc/modules: Fix crashes by adding CONFIG_RELOCATABLE to vermagic
2018-04-14Merge branch 'akpm' (patches from Andrew)Linus Torvalds29-654/+681
Merge yet more updates from Andrew Morton: - various hotfixes - kexec_file updates and feature work * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (27 commits) kernel/kexec_file.c: move purgatories sha256 to common code kernel/kexec_file.c: allow archs to set purgatory load address kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory load kernel/kexec_file.c: remove unneeded variables in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: remove unneeded for-loop in kexec_purgatory_setup_sechdrs kernel/kexec_file.c: split up __kexec_load_puragory kernel/kexec_file.c: use read-only sections in arch_kexec_apply_relocations* kernel/kexec_file.c: search symbols in read-only kexec_purgatory kernel/kexec_file.c: make purgatory_info->ehdr const kernel/kexec_file.c: remove checks in kexec_purgatory_load include/linux/kexec.h: silence compile warnings kexec_file, x86: move re-factored code to generic side x86: kexec_file: clean up prepare_elf64_headers() x86: kexec_file: lift CRASH_MAX_RANGES limit on crash_mem buffer x86: kexec_file: remove X86_64 dependency from prepare_elf64_headers() x86: kexec_file: purge system-ram walking from prepare_elf64_headers() kexec_file,x86,powerpc: factor out kexec_file_ops functions kexec_file: make use of purgatory optional proc: revalidate misc dentries mm, slab: reschedule cache_reap() on the same CPU ...
2018-04-14parisc: Fix missing binfmt_elf32.o build errorHelge Deller1-1/+1
Commit 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") removed the binfmt_elf32.c source file, but missed to drop the object file from the list of object files the Makefile, which then results in a build error. Fixes: 71d577db01a5 ("parisc: Switch to generic COMPAT_BINFMT_ELF") Reported-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Helge Deller <deller@gmx.de>
2018-04-14kernel/kexec_file.c: move purgatories sha256 to common codePhilipp Rudo5-4/+28
The code to verify the new kernels sha digest is applicable for all architectures. Move it to common code. One problem is the string.c implementation on x86. Currently sha256 includes x86/boot/string.h which defines memcpy and memset to be gcc builtins. By moving the sha256 implementation to common code and changing the include to linux/string.h both functions are no longer defined. Thus definitions have to be provided in x86/purgatory/string.c Link: http://lkml.kernel.org/r/20180321112751.22196-12-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-14kernel/kexec_file.c: allow archs to set purgatory load addressPhilipp Rudo4-32/+31
For s390 new kernels are loaded to fixed addresses in memory before they are booted. With the current code this is a problem as it assumes the kernel will be loaded to an 'arbitrary' address. In particular, kexec_locate_mem_hole searches for a large enough memory region and sets the load address (kexec_bufer->mem) to it. Luckily there is a simple workaround for this problem. By returning 1 in arch_kexec_walk_mem, kexec_locate_mem_hole is turned off. This allows the architecture to set kbuf->mem by hand. While the trick works fine for the kernel it does not for the purgatory as here the architectures don't have access to its kexec_buffer. Give architectures access to the purgatories kexec_buffer by changing kexec_load_purgatory to take a pointer to it. With this change architectures have access to the buffer and can edit it as they need. A nice side effect of this change is that we can get rid of the purgatory_info->purgatory_load_address field. As now the information stored there can directly be accessed from kbuf->mem. Link: http://lkml.kernel.org/r/20180321112751.22196-11-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-14kernel/kexec_file.c: remove mis-use of sh_offset field during purgatory loadPhilipp Rudo2-34/+13
The current code uses the sh_offset field in purgatory_info->sechdrs to store a pointer to the current load address of the section. Depending whether the section will be loaded or not this is either a pointer into purgatory_info->purgatory_buf or kexec_purgatory. This is not only a violation of the ELF standard but also makes the code very hard to understand as you cannot tell if the memory you are using is read-only or not. Remove this misuse and store the offset of the section in pugaroty_info->purgatory_buf in sh_offset. Link: http://lkml.kernel.org/r/20180321112751.22196-10-prudo@linux.vnet.ibm.com Signed-off-by: Philipp Rudo <prudo@linux.vnet.ibm.com> Acked-by: Dave Young <dyoung@redhat.com> Cc: AKASHI Takahiro <takahiro.akashi@linaro.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com> Cc: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-02 01:25:24 +0300