summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-29platform/x86/intel/pmc: Add suspend callbackDavid E. Box2-0/+5
Add a suspend callback to struct pmc for performing platform specific tasks before device suspend. This is needed in order to perform GBE LTR ignore on certain platforms at suspend-time instead of at probe-time and replace the GBE LTR ignore removal that was done in order to fix a bug introduced by commit 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()"). Fixes: 804951203aa5 ("platform/x86:intel/pmc: Combine core_init() and core_configure()") Signed-off-by: "David E. Box" <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20231223032548.1680738-4-david.e.box@linux.intel.com Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probeShin'ichiro Kawasaki1-41/+131
p2sb_bar() unhides P2SB device to get resources from the device. It guards the operation by locking pci_rescan_remove_lock so that parallel rescans do not find the P2SB device. However, this lock causes deadlock when PCI bus rescan is triggered by /sys/bus/pci/rescan. The rescan locks pci_rescan_remove_lock and probes PCI devices. When PCI devices call p2sb_bar() during probe, it locks pci_rescan_remove_lock again. Hence the deadlock. To avoid the deadlock, do not lock pci_rescan_remove_lock in p2sb_bar(). Instead, do the lock at fs_initcall. Introduce p2sb_cache_resources() for fs_initcall which gets and caches the P2SB resources. At p2sb_bar(), refer the cache and return to the caller. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Fixes: 9745fb07474f ("platform/x86/intel: Add Primary to Sideband (P2SB) bridge support") Cc: stable@vger.kernel.org Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/linux-pci/6xb24fjmptxxn5js2fjrrddjae6twex5bjaftwqsuawuqqqydx@7cl3uik5ef6j/ Link: https://lore.kernel.org/r/20231229063912.2517922-2-shinichiro.kawasaki@wdc.com Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2023-12-29ALSA: hda/tas2781: remove sound controls in unbindGergo Koteles1-93/+130
Remove sound controls in hda_unbind to make module loadable after module unload. Add a driver specific struct (tas2781_hda) to store the controls. This patch depends on patch: ALSA: hda/tas2781: do not use regcache Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/362aa3e2f81b9259a3e5222f576bec5debfc5e88.1703204848.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda/tas2781: move set_drv_data outside tasdevice_initGergo Koteles3-2/+4
allow driver specific driver data in tas2781-hda-i2c and tas2781-i2c Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/1398bd8bf3e935b1595a99128320e4a1913e210a.1703204848.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda/tas2781: fix typos in commentGergo Koteles1-2/+2
Correct typos. Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/ead5609d63e71e8e87c13e1767decca5b272d696.1703203812.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29ALSA: hda/tas2781: do not use regcacheGergo Koteles2-17/+2
There are two problems with using regcache in this module. The amplifier has 3 addressing levels (BOOK, PAGE, REG). The firmware contains blocks that must be written to BOOK 0x8C. The regcache doesn't know anything about BOOK, so regcache_sync writes invalid values to the actual BOOK. The module handles 2 or more separate amplifiers. The amplifiers have different register values, and the module uses only one regmap/regcache for all the amplifiers. The regcache_sync only writes the last amplifier used. The module successfully restores all the written register values (RC profile, program, configuration, calibration) without regcache. Remove regcache functions and set regmap cache_type to REGCACHE_NONE. Link: https://lore.kernel.org/r/21a183b5a08cb23b193af78d4b1114cc59419272.1701906455.git.soyer@irl.hu/ Fixes: 5be27f1e3ec9 ("ALSA: hda/tas2781: Add tas2781 HDA driver") Acked-by: Mark Brown <broonie@kernel.org> CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/491aeed0e2eecc3b704ec856f815db21bad3ba0e.1703202126.git.soyer@irl.hu Signed-off-by: Takashi Iwai <tiwai@suse.de>
2023-12-29genetlink: Use internal flags for multicast groupsIdo Schimmel5-8/+11
As explained in commit e03781879a0d ("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group"), the "flags" field in the multicast group structure reuses uAPI flags despite the field not being exposed to user space. This makes it impossible to extend its use without adding new uAPI flags, which is inappropriate for internal kernel checks. Solve this by adding internal flags (i.e., "GENL_MCAST_*") and convert the existing users to use them instead of the uAPI flags. Tested using the reproducers in commit 44ec98ea5ea9 ("psample: Require 'CAP_NET_ADMIN' when joining "packets" group") and commit e03781879a0d ("drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" group"). No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29ptp: ocp: fix bug in unregistering the DPLL subsystemSagi Maimon1-1/+1
When unregistering the DPLL subsystem the priv pointer is different then the one used for registration which cause failure in unregistering. Fixes: 09eeb3aecc6c ("ptp_ocp: implement DPLL ops") Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29Merge tag 'nf-23-12-20' of ↵David S. Miller3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablu Neira Syuso says: ==================== netfilter pull request 23-12-20 The following patchset contains Netfilter fixes for net: 1) Skip set commit for deleted/destroyed sets, this might trigger double deactivation of expired elements. 2) Fix packet mangling from egress, set transport offset from mac header for netdev/egress. Both fixes address bugs already present in several releases. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29iucv: make iucv_bus constGreg Kroah-Hartman2-3/+3
Now that the driver core can properly handle constant struct bus_type, move the iucv_bus variable to be a constant structure as well, placing it into read-only memory which can not be modified at runtime. Cc: Wenjia Zhang <wenjia@linux.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: linux-s390@vger.kernel.org Cc: netdev@vger.kernel.org Acked-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29ASoC: fsl_rpmsg: Fix error handler with pm_runtime_enableChancel Liu1-2/+8
There is error message when defer probe happens: fsl_rpmsg rpmsg_audio: Unbalanced pm_runtime_enable! Fix the error handler with pm_runtime_enable. Fixes: b73d9e6225e8 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg") Signed-off-by: Chancel Liu <chancel.liu@nxp.com> Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20231225080608.967953-1-chancel.liu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-29ethtool: reformat kerneldoc for struct ethtool_fec_statsJonathan Corbet1-2/+4
The kerneldoc comment for struct ethtool_fec_stats attempts to describe the "total" and "lanes" fields of the ethtool_fec_stat substructure in a way leading to these warnings: ./include/linux/ethtool.h:424: warning: Excess struct member 'lane' description in 'ethtool_fec_stats' ./include/linux/ethtool.h:424: warning: Excess struct member 'total' description in 'ethtool_fec_stats' Reformat the comment to retain the information while eliminating the warnings. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29ethtool: reformat kerneldoc for struct ethtool_link_settingsJonathan Corbet1-12/+15
The kernel doc comments for struct ethtool_link_settings includes documentation for three fields that were never present there, leading to these docs-build warnings: ./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'supported' description in 'ethtool_link_settings' ./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'advertising' description in 'ethtool_link_settings' ./include/uapi/linux/ethtool.h:2207: warning: Excess struct member 'lp_advertising' description in 'ethtool_link_settings' Remove the entries to make the warnings go away. There was some information there on how data in >link_mode_masks is formatted; move that to the body of the comment to preserve it. Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29net: sock: remove excess structure-member documentationJonathan Corbet1-2/+0
Remove a couple of kerneldoc entries for struct members that do not exist, addressing these warnings: ./include/net/sock.h:548: warning: Excess struct member '__sk_flags_offset' description in 'sock' ./include/net/sock.h:548: warning: Excess struct member 'sk_padding' description in 'sock' Signed-off-by: Jonathan Corbet <corbet@lwn.net> Reviewed-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-29Merge tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbdLinus Torvalds1-3/+12
Pull ksmbd server fix from Steve French: - address possible slab out of bounds in parsing of open requests * tag '6.7rc7-smb3-srv-fix' of git://git.samba.org/ksmbd: ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()
2023-12-28Merge tag 'kbuild-fixes-v6.7-2' of ↵Linus Torvalds4-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Revive proper alignment for the ksymtab and kcrctab sections - Fix gen_compile_commands.py tool to resolve symbolic links - Fix symbolic links to installed debug VDSO files - Update MAINTAINERS * tag 'kbuild-fixes-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: linux/export: Ensure natural alignment of kcrctab array kbuild: fix build ID symlinks to installed debug VDSO files gen_compile_commands.py: fix path resolve with symlinks in it MAINTAINERS: Add scripts/clang-tools to Kbuild section linux/export: Fix alignment for 64-bit ksymtab entries
2023-12-28Merge tag 'bcachefs-2023-12-27' of https://evilpiepirate.org/git/bcachefsLinus Torvalds5-12/+16
Pull bcachefs fixes from Kent Overstreet: "Just a few fixes: besides a few one liners, we have a fix for snapshots + compression where the extent update path didn't account for the fact that with snapshots, we might split an existing extent into three, not just two; and a small fixup for promotes which were broken by the recent changes in the data update path to correctly take into account device durability" * tag 'bcachefs-2023-12-27' of https://evilpiepirate.org/git/bcachefs: bcachefs: Fix promotes bcachefs: Fix leakage of internal error code bcachefs: Fix insufficient disk reservation with compression + snapshots bcachefs: fix BCH_FSCK_ERR enum
2023-12-28linux/export: Ensure natural alignment of kcrctab arrayHelge Deller1-0/+1
The ___kcrctab section holds an array of 32-bit CRC values. Add a .balign 4 to tell the linker the correct memory alignment. Fixes: f3304ecd7f06 ("linux/export: use inline assembler to populate symbol CRCs") Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-12-28ksmbd: fix slab-out-of-bounds in smb_strndup_from_utf16()Namjae Jeon1-3/+12
If ->NameOffset/Length is bigger than ->CreateContextsOffset/Length, ksmbd_check_message doesn't validate request buffer it correctly. So slab-out-of-bounds warning from calling smb_strndup_from_utf16() in smb2_open() could happen. If ->NameLength is non-zero, Set the larger of the two sums (Name and CreateContext size) as the offset and length of the data area. Reported-by: Yang Chaoming <lometsj@live.com> Cc: stable@vger.kernel.org Signed-off-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2023-12-28Merge tag 'mm-hotfixes-stable-2023-12-27-15-00' of ↵Linus Torvalds13-32/+74
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "11 hotfixes. 7 are cc:stable and the other 4 address post-6.6 issues or are not considered backporting material" * tag 'mm-hotfixes-stable-2023-12-27-15-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mailmap: add an old address for Naoya Horiguchi mm/memory-failure: cast index to loff_t before shifting it mm/memory-failure: check the mapcount of the precise page mm/memory-failure: pass the folio and the page to collect_procs() selftests: secretmem: floor the memory size to the multiple of page_size mm: migrate high-order folios in swap cache correctly maple_tree: do not preallocate nodes for slot stores mm/filemap: avoid buffered read/write race to read inconsistent data kunit: kasan_test: disable fortify string checker on kmalloc_oob_memset kexec: select CRYPTO from KEXEC_FILE instead of depending on it kexec: fix KEXEC_FILE dependencies
2023-12-27igc: Check VLAN EtherType maskKurt Kanzenbach1-0/+8
Currently the driver accepts VLAN EtherType steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. The VLAN EtherType can only be matched by full mask. Therefore, add a check for that. For instance the following rule is invalid, but the driver accepts it and ignores the user specified mask: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 \ | m 0x00ff action 0 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Suggested-by: Suman Ghosh <sumang@marvell.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Check VLAN TCI maskKurt Kanzenbach2-3/+26
Currently the driver accepts VLAN TCI steering rules regardless of the configured mask. And things might fail silently or with confusing error messages to the user. There are two ways to handle the VLAN TCI mask: 1. Match on the PCP field using a VLAN prio filter 2. Match on complete TCI field using a flex filter Therefore, add checks and code for that. For instance the following rule is invalid and will be converted into a VLAN prio rule which is not correct: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |Added rule with ID 61 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 61 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x0 mask: 0xffff | VLAN: 0x1 mask: 0x1fff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 1 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan 0x0001 m 0xf000 \ | action 1 |rmgr: Cannot insert RX class rule: Operation not supported Fixes: 7991487ecb2d ("igc: Allow for Flex Filters to be installed") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27igc: Report VLAN EtherType matching back to userKurt Kanzenbach1-0/+6
Currently the driver allows to configure matching by VLAN EtherType. However, the retrieval function does not report it back to the user. Add it. Before: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | Action: Direct to queue 0 After: |root@host:~# ethtool -N enp3s0 flow-type ether vlan-etype 0x8100 action 0 |Added rule with ID 63 |root@host:~# ethtool --show-ntuple enp3s0 |4 RX rings available |Total 1 rules | |Filter: 63 | Flow Type: Raw Ethernet | Src MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Dest MAC addr: 00:00:00:00:00:00 mask: FF:FF:FF:FF:FF:FF | Ethertype: 0x0 mask: 0xFFFF | VLAN EtherType: 0x8100 mask: 0x0 | VLAN: 0x0 mask: 0xffff | User-defined: 0x0 mask: 0xffffffffffffffff | Action: Direct to queue 0 Fixes: 2b477d057e33 ("igc: Integrate flex filter into ethtool ops") Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27i40e: Fix filter input checks to prevent config with invalid valuesSudheer Mogilappagari1-4/+4
Prevent VF from configuring filters with unsupported actions or use REDIRECT action with invalid tc number. Current checks could cause out of bounds access on PF side. Fixes: e284fc280473 ("i40e: Add and delete cloud filter") Reviewed-by: Andrii Staikov <andrii.staikov@intel.com> Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: dpll: fix phase offset valueArkadiusz Kubalewski1-3/+1
Stop dividing the phase_offset value received from firmware. This fault is present since the initial implementation. The phase_offset value received from firmware is in 0.01ps resolution. Dpll subsystem is using the value in 0.001ps, raw value is adjusted before providing it to the user. The user can observe the value of phase offset with response to `pin-get` netlink message of dpll subsystem for an active pin: $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \ --do pin-get --json '{"id":2}' Where example of correct response would be: {'board-label': 'C827_0-RCLKA', 'capabilities': 6, 'clock-id': 4658613174691613800, 'frequency': 1953125, 'id': 2, 'module-name': 'ice', 'parent-device': [{'direction': 'input', 'parent-id': 6, 'phase-offset': -216839550, 'prio': 9, 'state': 'connected'}, {'direction': 'input', 'parent-id': 7, 'phase-offset': -42930, 'prio': 8, 'state': 'connected'}], 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, 'type': 'mux'} Provided phase-offset value (-42930) shall be divided by the user with DPLL_PHASE_OFFSET_DIVIDER to get actual value of -42.930 ps. Before the fix, the response was not correct: {'board-label': 'C827_0-RCLKA', 'capabilities': 6, 'clock-id': 4658613174691613800, 'frequency': 1953125, 'id': 2, 'module-name': 'ice', 'parent-device': [{'direction': 'input', 'parent-id': 6, 'phase-offset': -216839, 'prio': 9, 'state': 'connected'}, {'direction': 'input', 'parent-id': 7, 'phase-offset': -42, 'prio': 8, 'state': 'connected'}], 'phase-adjust': 0, 'phase-adjust-max': 16723, 'phase-adjust-min': -16723, 'type': 'mux'} Where phase-offset value (-42), after division (DPLL_PHASE_OFFSET_DIVIDER) would be: -0.042 ps. Fixes: 8a3a565ff210 ("ice: add admin commands to access cgu configuration") Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks") Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Shut down VSI with "link-down-on-close" enabledNgai-Mint Kwan1-0/+2
Disabling netdev with ethtool private flag "link-down-on-close" enabled can cause NULL pointer dereference bug. Shut down VSI regardless of "link-down-on-close" state. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Ngai-Mint Kwan <ngai-mint.kwan@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27ice: Fix link_down_on_close messageKatarzyna Wieczerzycka1-3/+7
The driver should not report an error message when for a medialess port the link_down_on_close flag is enabled and the physical link cannot be set down. Fixes: 8ac7132704f3 ("ice: Fix interface being down after reset with link-down-on-close flag on") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Katarzyna Wieczerzycka <katarzyna.wieczerzycka@intel.com> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2023-12-27MAINTAINERS: Add a missing file to the INTEL GPIO sectionAndy Shevchenko1-0/+1
When gpio-tangier was split the new born headers had been missed in the MAINTAINERS. Add it there. Fixes: d2c19e89e03c ("gpio: tangier: Introduce Intel Tangier GPIO driver") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27MAINTAINERS: Remove Andy from GPIO maintainersAndy Shevchenko1-1/+0
Too many things are going on, and reviewing GPIO related code seems not the best I can do, hence I step down as a reviewer of the GPIO subsystem. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2023-12-27MAINTAINERS: split out the uAPI into a new sectionBartosz Golaszewski1-2/+10
Kent Gibson is the author of the character device uAPI v2 and should be Cc'ed on all patches aimed for it. Unfortunately this is not the case as he's not listed in MAINTAINERS. Split the uAPI files into their own section and make Kent the reviewer. Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2023-12-27net: pktgen: Use wait_event_freezable_timeout() for freezable kthreadKevin Hao1-4/+2
A freezable kernel thread can enter frozen state during freezing by either calling try_to_freeze() or using wait_event_freezable() and its variants. So for the following snippet of code in a kernel thread loop: wait_event_interruptible_timeout(); try_to_freeze(); We can change it to a simple wait_event_freezable_timeout() and then eliminate a function call. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27Merge tag 'wireless-2023-12-19' of ↵David S. Miller6-23/+30
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Johannes Berg says: ==================== Just a couple of things: * debugfs fixes * rfkill fix in iwlwifi * remove mostly-not-working list ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27Merge branch 'net-tja11xx-macsec-support'David S. Miller12-101/+2043
Radu Pirea says: ==================== Add MACsec support for TJA11XX C45 PHYs This is the MACsec support for TJA11XX PHYs. The MACsec block encrypts the ethernet frames on the fly and has no buffering. This operation will grow the frames by 32 bytes. If the frames are sent back to back, the MACsec block will not have enough room to insert the SecTAG and the ICV and the frames will be dropped. To mitigate this, the PHY can parse a specific ethertype with some padding bytes and replace them with the SecTAG and ICV. These padding bytes might be dummy or might contain information about TX SC that must be used to encrypt the frame. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: phy: nxp-c45-tja11xx: implement mdo_insert_tx_tagRadu Pirea (NXP OSS)1-0/+41
Implement mdo_insert_tx_tag to insert the TLV header in the ethernet frame. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: phy: nxp-c45-tja11xx: add MACsec statisticsRadu Pirea (NXP OSS)1-0/+345
Add MACsec statistics callbacks. The statistic registers must be set to 0 if the SC/SA is deleted to read relevant values next time when the SC/SA is used. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: phy: nxp-c45-tja11xx: add MACsec supportRadu Pirea (NXP OSS)6-33/+1460
Add MACsec support. The MACsec block has four TX SCs and four RX SCs. The driver supports up to four SecY. Each SecY with one TX SC and one RX SC. The RX SCs can have two keys, key A and key B, written in hardware and enabled at the same time. The TX SCs can have two keys written in hardware, but only one can be active at a given time. On TX, the SC is selected using the MAC source address. Due of this selection mechanism, each offloaded netdev must have a unique MAC address. On RX, the SC is selected by SCI(found in SecTAG or calculated using MAC SA), or using RX SC 0 as implicit. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: macsec: introduce mdo_insert_tx_tagRadu Pirea (NXP OSS)2-5/+93
Offloading MACsec in PHYs requires inserting the SecTAG and the ICV in the ethernet frame. This operation will increase the frame size with up to 32 bytes. If the frames are sent at line rate, the PHY will not have enough room to insert the SecTAG and the ICV. Some PHYs use a hardware buffer to store a number of ethernet frames and, if it fills up, a pause frame is sent to the MAC to control the flow. This HW implementation does not need any modification in the stack. Other PHYs might offer to use a specific ethertype with some padding bytes present in the ethernet frame. This ethertype and its associated bytes will be replaced by the SecTAG and ICV. mdo_insert_tx_tag allows the PHY drivers to add any specific tag in the skb. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: macsec: revert the MAC address if mdo_upd_secy failsRadu Pirea (NXP OSS)1-12/+26
Revert the MAC address if mdo_upd_secy fails. Offloaded MACsec device might be left in an inconsistent state. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: macsec: documentation for macsec_context and macsec_opsRadu Pirea (NXP OSS)1-0/+39
Add description for fields of struct macsec_context and struct macsec_ops. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: macsec: move sci_to_cpu to macsec headerRadu Pirea (NXP OSS)2-5/+5
Move sci_to_cpu to the MACsec header to use it in drivers. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: macsec: use skb_ensure_writable_head_tail to expand the skbRadu Pirea (NXP OSS)1-20/+5
Use skb_ensure_writable_head_tail to expand the skb if needed instead of reimplementing a similar operation. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27net: rename dsa_realloc_skb to skb_ensure_writable_head_tailRadu Pirea (NXP OSS)3-26/+29
Rename dsa_realloc_skb to skb_ensure_writable_head_tail and move it to skbuff.c to use it as helper. Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27drm/i915/perf: Update handling of MMIO triggered reportsUmesh Nerlige Ramappa1-5/+34
On XEHP platforms user is not able to find MMIO triggered reports in the OA buffer since i915 squashes the context ID fields. These context ID fields hold the MMIO trigger markers. Update logic to not squash the context ID fields of MMIO triggered reports. Fixes: cba94bbcff08 ("drm/i915/perf: Determine context valid in OA reports") Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231219000543.1087706-1-umesh.nerlige.ramappa@intel.com (cherry picked from commit 0c68132df6e66244acec1bb5b9e19b0751414389) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2023-12-27drm/i915/dp: Fix passing the correct DPCD_REV for drm_dp_set_phy_test_patternKhaled Almahallawy1-1/+1
Using link_status to get DPCD_REV fails when disabling/defaulting phy pattern. Use intel_dp->dpcd to access DPCD_REV correctly. Fixes: 8cdf72711928 ("drm/i915/dp: Program vswing, pre-emphasis, test-pattern") Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231213211542.3585105-3-khaled.almahallawy@intel.com (cherry picked from commit 3ee302ec22d6e1d7d1e6d381b0d507ee80f2135c)
2023-12-27bcachefs: Fix promotesKent Overstreet1-1/+2
The recent work to fix data moves w.r.t. durability broke promotes, because the caused us to bail out when the extent minus pointers being dropped still has enough pointers to satisfy the current number of replicas. Disable this check when we're adding cached replicas. Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2023-12-27bridge: cfm: fix enum typo in br_cc_ccm_tx_parseLin Ma1-1/+1
It appears that there is a typo in the code where the nlattr array is being parsed with policy br_cfm_cc_ccm_tx_policy, but the instance is being accessed via IFLA_BRIDGE_CFM_CC_RDI_INSTANCE, which is associated with the policy br_cfm_cc_rdi_policy. This problem was introduced by commit 2be665c3940d ("bridge: cfm: Netlink SET configuration Interface."). Though it seems like a harmless typo since these two enum owns the exact same value (1 here), it is quite misleading hence fix it by using the correct enum IFLA_BRIDGE_CFM_CC_CCM_TX_INSTANCE here. Signed-off-by: Lin Ma <linma@zju.edu.cn> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27Merge branch 'mptcp-cleanups-ephemeral-port-sockopts'David S. Miller3-68/+79
Matthieu Baerts says: ==================== mptcp: cleanup and support more ephemeral ports sockopts Patch 1 is a cleanup one: mptcp_is_tcpsk() helper was modifying sock_ops in some cases which is unexpected with that name. Patch 2 to 4 add support for two socket options: IP_LOCAL_PORT_RANGE and IP_BIND_ADDRESS_NO_PORT. The first one is a preparation patch, the second one adds the support while the last one modifies an existing selftest to validate the new features. ==================== Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27selftests/net: add MPTCP coverage for IP_LOCAL_PORT_RANGEMaxim Galaganov1-0/+12
Since previous commit, MPTCP has support for IP_BIND_ADDRESS_NO_PORT and IP_LOCAL_PORT_RANGE sockopts. Add ip4_mptcp and ip6_mptcp fixture variants to ip_local_port_range selftest to provide selftest coverage for these sockopts. Acked-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Maxim Galaganov <max@internet.ru> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27mptcp: sockopt: support IP_LOCAL_PORT_RANGE and IP_BIND_ADDRESS_NO_PORTMaxim Galaganov1-1/+20
Support for IP_BIND_ADDRESS_NO_PORT sockopt was introduced in [1]. Recently [2] allowed its value to be accessed without locking the socket. Support for (newer) IP_LOCAL_PORT_RANGE sockopt was introduced in [3]. In the same series a selftest was added in [4]. This selftest also covers the IP_BIND_ADDRESS_NO_PORT sockopt. This patch enables getsockopt()/setsockopt() on MPTCP sockets for these socket options, syncing set values to subflows in sync_socket_options(). Ephemeral port range is synced to subflows, enabling NAT usecase described in [3]. [1] commit 90c337da1524 ("inet: add IP_BIND_ADDRESS_NO_PORT to overcome bind(0) limitations") [2] commit ca571e2eb7eb ("inet: move inet->bind_address_no_port to inet->inet_flags") [3] commit 91d0b78c5177 ("inet: Add IP_LOCAL_PORT_RANGE socket option") [4] commit ae5439658cce ("selftests/net: Cover the IP_LOCAL_PORT_RANGE socket option") Signed-off-by: Maxim Galaganov <max@internet.ru> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-27mptcp: rename mptcp_setsockopt_sol_ip_set_transparent()Maxim Galaganov1-3/+3
Next patch extends this function so that it's not specific to IP_TRANSPARENT. Change function name to mptcp_setsockopt_sol_ip_set(). Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Maxim Galaganov <max@internet.ru> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 01:27:57 +0300