| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Just call the function directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-17-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Just call the code to setup the opregions and EDID data directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-16-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Just open code the calls to the VFIO APIs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-15-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Just call the VFIO functions directly instead of through the method
table.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-14-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Always pass the actual vgpu structure instead of encoding it as a
"handle" and add a bool flag to denote if a VGPU is attached.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-13-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Consolidate the per-VGPU structures into a single one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-12-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Move towards having only a single structure for the per-VGPU state.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-11-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-10-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
The map_gfn_to_mfn and set_trap_area ops are never defined, so remove
them and clean up code that depends on them in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-9-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Remove these pointless indirect alls by just calling the only instance
of each method directly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-8-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Instead of having an option to build the gvt code into the main i915
module, just move it into the kvmgt.ko module. This only requires
a new struct with three entries that the KVMGT modules needs to register
with the main i915 module, and a proper list of GVT-enabled devices
instead of global device pointer.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-7-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Free the intel_vgpu_ops symbol name for something that fits better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-4-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
The only supported hypervisor is KVM, so don't bother with dead code
enumerating hypervisors.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-3-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
THIS_MODULE always is reference when a symbol called by it is used, so
don't bother with the additional reference.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220411141403.86980-2-hch@lst.de
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
|
|
Drop extra ccflags, drop extra intermediate variables, list object files
one per line alphabetically.
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/8bc0895376c077156a671e24ac6a5c75b7db4c9c.1649852517.git.jani.nikula@intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
TRACE_INCLUDE_PATH should be a path relative to define_trace.h, not the
file including it. (See the comment in include/trace/define_trace.h.)
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/48b772795b7ab674f609ecad53b4882c66a8262a.1649852517.git.jani.nikula@intel.com
Reviewed-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
|
|
The code of saving initial HW state snapshot has been moved into i915.
Let the GVT-g core logic use that snapshot.
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Vivi Rodrigo <rodrigo.vivi@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220407071945.72148-4-zhi.a.wang@intel.com
|
|
Save the initial HW state snapshot in i915 so that the rest code of GVT-g
can be moved into a dedicated module while it can still get a clean
initial HW state saved at the correct time during the initialization of
i915. The futhrer vGPU created by GVT-g will use this HW state as the
initial HW state.
v6:
- Remove the reference of intel_gvt_device_info.(Christoph)
- Refine the save_mmio() function. (Christoph)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Vivi Rodrigo <rodrigo.vivi@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220407071945.72148-3-zhi.a.wang@intel.com
|
|
To support the new mdev interfaces and the re-factor patches from
Christoph, which moves the GVT-g code into a dedicated module, the GVT-g
MMIO tracking table needs to be separated from GVT-g.
v9:
- Fix a problem might cause kernel panic.
- Remove the redaundant definitation of intel_get_device_type(). (Jani)
- Sort the list of header reference in intel_gvt_mmio.c (Jani)
- Include minimum header insted in intel_gvt_mmio.c (Jani)
v8:
- Use SPDX header in the intel_gvt_mmio_table.c
- Reference the gvt.h with path. (Jani)
- Add a missing fix on mmio emulation path during the debug.
- Fix a building problem on refreshed gvt-staging branch. (Christoph)
v7:
- Keep the marcos of device generation in GVT-g. (Christoph, Jani)
v6:
- Move the mmio_table.c into i915. (Christoph)
- Keep init_device_info and related structures in GVT-g. (Christoph)
- Refine the callbacks of the iterator. (Christoph)
- Move the flags of MMIO register defination to GVT-g. (Chrsitoph)
- Move the mmio block handling to GVT-g.
v5:
- Re-design the mmio table framework. (Christoph)
v4:
- Fix the errors of patch checking scripts.
v3:
- Fix the errors when CONFIG_DRM_I915_WERROR is turned on. (Jani)
v2:
- Implement a mmio table instead of generating it by marco in i915. (Jani)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Vivi Rodrigo <rodrigo.vivi@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220407071945.72148-2-zhi.a.wang@intel.com
|
|
This reverts commit 461fa7b0ac565ef25c1da0ced31005dd437883a7.
We are missing some inter dependencies here so re-introduce the lock
until we have figured out what's missing. Just drop/retake it while
adding dependencies.
v2: still drop the lock while adding dependencies
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> (v1)
Fixes: 461fa7b0ac56 ("drm/amdgpu: remove ctx->lock")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220419110633.166236-1-christian.koenig@amd.com
|
|
There is a deadlock in rr_close(), which is shown below:
(Thread 1) | (Thread 2)
| rr_open()
rr_close() | add_timer()
spin_lock_irqsave() //(1) | (wait a time)
... | rr_timer()
del_timer_sync() | spin_lock_irqsave() //(2)
(wait timer to stop) | ...
We hold rrpriv->lock in position (1) of thread 1 and
use del_timer_sync() to wait timer to stop, but timer handler
also need rrpriv->lock in position (2) of thread 2.
As a result, rr_close() will block forever.
This patch extracts del_timer_sync() from the protection of
spin_lock_irqsave(), which could let timer handler to obtain
the needed lock.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://lore.kernel.org/r/20220417125519.82618-1-duoming@zju.edu.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n
due to "-mabi=apcs-gnu", even though it has a single u8:
whiteheat_private {
__u8 mcr; /* 0 1 */
/* size: 4, cachelines: 1, members: 1 */
/* padding: 3 */
/* last cacheline: 4 bytes */
};
The result is technically harmless, as both the source and the
destinations are currently the same allocation size (4 bytes) and don't
use their padding, but if anything were to ever be added after the
"mcr" member in "struct whiteheat_private", it would be overwritten. The
structs both have a single u8 "mcr" member, but are 4 bytes in padded
size. The memcpy() destination was explicitly targeting the u8 member
(size 1) with the length of the whole structure (size 4), triggering
the memcpy buffer overflow warning:
In file included from include/linux/string.h:253,
from include/linux/bitmap.h:11,
from include/linux/cpumask.h:12,
from include/linux/smp.h:13,
from include/linux/lockdep.h:14,
from include/linux/spinlock.h:62,
from include/linux/mmzone.h:8,
from include/linux/gfp.h:6,
from include/linux/slab.h:15,
from drivers/usb/serial/whiteheat.c:17:
In function 'fortify_memcpy_chk',
inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4:
include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
328 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Instead, just assign the one byte directly.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202204142318.vDqjjSFn-lkp@intel.com
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220421001234.2421107-1-keescook@chromium.org
Signed-off-by: Johan Hovold <johan@kernel.org>
|
|
845/865 G9
On HP EliteBook 845 G9 and EliteBook 865 G9, the audio LEDs can be enabled by
ALC285_FIXUP_HP_MUTE_LED. So use it accordingly.
Signed-off-by: Andy Chi <andy.chi@canonical.com>
Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops")
Link: https://lore.kernel.org/r/20220421063606.39772-1-andy.chi@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
This patch fixes a memory corruption that occurred in the
nand_scan() path for Hynix nand device.
On boot, for Hynix nand device will panic at a weird place:
| Unable to handle kernel NULL pointer dereference at virtual
address 00000070
| [00000070] *pgd=00000000
| Internal error: Oops: 5 [#1] PREEMPT SMP ARM
| Modules linked in:
| CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0
#38
| Hardware name: Generic DT based system
| PC is at nandc_set_reg+0x8/0x1c
| LR is at qcom_nandc_command+0x20c/0x5d0
| pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113
| sp : c14adc50 ip : c14ee208 fp : c0cc970c
| r10: 000000a3 r9 : 00000000 r8 : 00000040
| r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040
| r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040
| Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
| Control: 10c5387d Table: 8020406a DAC: 00000051
| Register r0 information: slab kmalloc-2k start c14ee000 pointer offset
64 size 2048
| Process swapper/0 (pid: 1, stack limit = 0x(ptrval))
| nandc_set_reg from qcom_nandc_command+0x20c/0x5d0
| qcom_nandc_command from nand_readid_op+0x198/0x1e8
| nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78
| hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454
| hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8
| nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0
| qcom_nandc_probe from platform_probe+0x58/0xac
The problem is that the nand_scan()'s qcom_nand_attach_chip callback
is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size.
This causes the sg_init_table of clear_bam_transaction() in the driver's
qcom_nandc_command() to memset much more than what was initially
allocated by alloc_bam_transaction().
This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page
size in qcom_nand_attach_chip call back after freeing the previously
allocated memory for bam txn as per nandc->max_cwperpage = 1 and then
again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on
page size in qcom_nand_attach_chip call back itself.
Cc: stable@vger.kernel.org
Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()")
Reported-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Co-developed-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Sricharan R <quic_srichara@quicinc.com>
Signed-off-by: Md Sadre Alam <quic_mdalam@quicinc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/1650268107-5363-1-git-send-email-quic_mdalam@quicinc.com
|
|
Commit 46b5889cc2c5 ("mtd: implement proper partition handling")
started using "mtd_get_master_ofs()" in mtd callbacks to determine
memory offsets by means of 'part' field from mtd_info, what previously
was smashed accessing 'master' field in the mtd_set_dev_defaults() method.
That provides wrong offset what causes hardware access errors.
Just make 'part', 'master' as separate fields, rather than using
union type to avoid 'part' data corruption when mtd_set_dev_defaults()
is called.
Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling")
Signed-off-by: Oleksandr Ocheretnyi <oocheret@cisco.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220417184649.449289-1-oocheret@cisco.com
|
|
wait_for_completion_timeout() returns unsigned long not int.
It returns 0 if timed out, and positive if completed.
The check for <= 0 is ambiguous and should be == 0 here
indicating timeout which is the only error case.
Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220412083435.29254-1-linmq006@gmail.com
|
|
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or
bridge")' attempted to simplify the case of expressing a simple panel
under a DSI controller, by assuming that the first non-graph child node
was a panel or bridge.
Unfortunately for non-trivial cases the first child node might not be a
panel or bridge. Examples of this can be a aux-bus in the case of
DisplayPort, or an opp-table represented before the panel node.
In these cases the reverted commit prevents the caller from ever finding
a reference to the panel.
This reverts commit '80253168dbfd ("drm: of: Lookup if child node has
panel or bridge")', in favor of using an explicit graph reference to the
panel in the trivial case as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-2-bjorn.andersson@linaro.org
|
|
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or
bridge")' introduced the ability to describe a panel under a display
controller without having to use a graph to connect the controller to
its single child panel (or bridge).
The implementation of this would find the first non-graph node and
attempt to acquire the related panel or bridge. This prevents cases
where any other child node, such as a aux bus for a DisplayPort
controller, or an opp-table to find the referenced panel.
Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for
bridge/panel detection")' attempted to solve this problem by not
bypassing the graph reference lookup before attempting to find the panel
or bridge.
While this does solve the case where a proper graph reference is
present, it does not allow the caller to distinguish between a
yet-to-be-probed panel or bridge and the absence of a reference to a
panel.
One such case is a DisplayPort controller that on some boards have an
explicitly described reference to a panel, but on others have a
discoverable DisplayPort display attached (which doesn't need to be
expressed in DeviceTree).
This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible
cases for bridge/panel detection")', as a step towards reverting commit
'80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420231230.58499-1-bjorn.andersson@linaro.org
|
|
If the device is already in a runtime PM enabled state
pm_runtime_get_sync() will return 1.
Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync()
fails, so use pm_runtime_resume_and_get() instead. this function
will handle this.
Fixes: 4078f5757144 ("drm/vc4: Add DSI driver")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420135008.2757-1-linmq006@gmail.com
|
|
The LoPAPR spec defines a guest visible IOMMU with a variable page size.
Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks
the biggest (16MB). In the case of a passed though PCI device, there is
a hardware IOMMU which does not support all pages sizes from the above -
P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated
16M IOMMU page we may create several smaller mappings ("TCEs") in
the hardware IOMMU.
The code wrongly uses the emulated TCE index instead of hardware TCE
index in error handling. The problem is easier to see on POWER8 with
multi-level TCE tables (when only the first level is preallocated)
as hash mode uses real mode TCE hypercalls handlers.
The kernel starts using indirect tables when VMs get bigger than 128GB
(depends on the max page order).
The very first real mode hcall is going to fail with H_TOO_HARD as
in the real mode we cannot allocate memory for TCEs (we can in the virtual
mode) but on the way out the code attempts to clear hardware TCEs using
emulated TCE indexes which corrupts random kernel memory because
it_offset==1<<59 is subtracted from those indexes and the resulting index
is out of the TCE table bounds.
This fixes kvmppc_clear_tce() to use the correct TCE indexes.
While at it, this fixes TCE cache invalidation which uses emulated TCE
indexes instead of the hardware ones. This went unnoticed as 64bit DMA
is used these days and VMs map all RAM in one go and only then do DMA
and this is when the TCE cache gets populated.
Potentially this could slow down mapping, however normally 16MB
emulated pages are backed by 64K hardware pages so it is one write to
the "TCE Kill" per 256 updates which is not that bad considering the size
of the cache (1024 TCEs or so).
Fixes: ca1fc489cfa0 ("KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages")
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Tested-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220420050840.328223-1-aik@ozlabs.ru
|
|
The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB.
ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8
Exynos selects only the latter leading to possible wrong configuration
on ARMv8 build:
WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS
Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y])
Selected by [y]:
- ARCH_EXYNOS [=y]
Always select the GPIOLIB from the Samsung pinctrl drivers to fix the
issue. This requires removing of OF_GPIO dependency (to avoid recursive
dependency), so add dependency on OF for COMPILE_TEST cases.
Reported-by: Necip Fazil Yildiran <fazilyildiran@gmail.com>
Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20220420141407.470955-1-krzysztof.kozlowski@linaro.org
|
|
This is a partial revert of commit 0faf20a1ad16 ("powerpc/64s/interrupt:
Don't enable MSR[EE] in irq handlers unless perf is in use").
Prior to that commit, we always set the decrementer in
timer_interrupt(), to clear the timer interrupt. Otherwise we could end
up continuously taking timer interrupts.
When high res timers are enabled there is no problem seen with leaving
the decrementer untouched in timer_interrupt(), because it will be
programmed via hrtimer_interrupt() -> tick_program_event() ->
clockevents_program_event() -> decrementer_set_next_event().
However with CONFIG_HIGH_RES_TIMERS=n or booting with highres=off, we
see a stall/lockup, because tick_nohz_handler() does not cause a
reprogram of the decrementer, leading to endless timer interrupts.
Example trace:
[ 1.898617][ T7] Freeing initrd memory: 2624K^M
[ 22.680919][ C1] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:^M
[ 22.682281][ C1] rcu: 0-....: (25 ticks this GP) idle=073/0/0x1 softirq=10/16 fqs=1050 ^M
[ 22.682851][ C1] (detected by 1, t=2102 jiffies, g=-1179, q=476)^M
[ 22.683649][ C1] Sending NMI from CPU 1 to CPUs 0:^M
[ 22.685252][ C0] NMI backtrace for cpu 0^M
[ 22.685649][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc2-00185-g0faf20a1ad16 #145^M
[ 22.686393][ C0] NIP: c000000000016d64 LR: c000000000f6cca4 CTR: c00000000019c6e0^M
[ 22.686774][ C0] REGS: c000000002833590 TRAP: 0500 Not tainted (5.16.0-rc2-00185-g0faf20a1ad16)^M
[ 22.687222][ C0] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24000222 XER: 00000000^M
[ 22.688297][ C0] CFAR: c00000000000c854 IRQMASK: 0 ^M
...
[ 22.692637][ C0] NIP [c000000000016d64] arch_local_irq_restore+0x174/0x250^M
[ 22.694443][ C0] LR [c000000000f6cca4] __do_softirq+0xe4/0x3dc^M
[ 22.695762][ C0] Call Trace:^M
[ 22.696050][ C0] [c000000002833830] [c000000000f6cc80] __do_softirq+0xc0/0x3dc (unreliable)^M
[ 22.697377][ C0] [c000000002833920] [c000000000151508] __irq_exit_rcu+0xd8/0x130^M
[ 22.698739][ C0] [c000000002833950] [c000000000151730] irq_exit+0x20/0x40^M
[ 22.699938][ C0] [c000000002833970] [c000000000027f40] timer_interrupt+0x270/0x460^M
[ 22.701119][ C0] [c0000000028339d0] [c0000000000099a8] decrementer_common_virt+0x208/0x210^M
Possibly this should be fixed in the lowres timing code, but that would
be a generic change and could take some time and may not backport
easily, so for now make the programming of the decrementer unconditional
again in timer_interrupt() to avoid the stall/lockup.
Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use")
Reported-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/20220420141657.771442-1-mpe@ellerman.id.au
|
|
because the copychunk_write might cover a region of the file that has not yet
been sent to the server and thus fail.
A simple way to reproduce this is:
truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile
the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with
the 'fcollapse 16k 24k' due to write-back caching.
fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call
and it will fail serverside since the file is still 0b in size serverside
until the writes have been destaged.
To avoid this we must ensure that we destage any unwritten data to the
server before calling COPYCHUNK_WRITE.
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373
Reported-by: Xiaoli Feng <xifeng@redhat.com>
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
TCP_Server_Info::origin_fullpath and TCP_Server_Info::leaf_fullpath
are protected by refpath_lock mutex and not cifs_tcp_ses_lock
spinlock.
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
Either mount(2) or automount might not have server->origin_fullpath
set yet while refresh_cache_worker() is attempting to refresh DFS
referrals. Add missing NULL check and locking around it.
This fixes bellow crash:
[ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
[ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
[ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10
[ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014
[ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs]
[ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.284990] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.285625] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.286683] Call Trace:
[ 1070.286890] <TASK>
[ 1070.287070] refresh_cache_worker+0x895/0xd20 [cifs]
[ 1070.287475] ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs]
[ 1070.287905] ? __lock_acquire+0xcd1/0x6960
[ 1070.288247] ? is_dynamic_key+0x1a0/0x1a0
[ 1070.288591] ? lockdep_hardirqs_on_prepare+0x410/0x410
[ 1070.289012] ? lock_downgrade+0x6f0/0x6f0
[ 1070.289318] process_one_work+0x7bd/0x12d0
[ 1070.289637] ? worker_thread+0x160/0xec0
[ 1070.289970] ? pwq_dec_nr_in_flight+0x230/0x230
[ 1070.290318] ? _raw_spin_lock_irq+0x5e/0x90
[ 1070.290619] worker_thread+0x5ac/0xec0
[ 1070.290891] ? process_one_work+0x12d0/0x12d0
[ 1070.291199] kthread+0x2a5/0x350
[ 1070.291430] ? kthread_complete_and_exit+0x20/0x20
[ 1070.291770] ret_from_fork+0x22/0x30
[ 1070.292050] </TASK>
[ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4
[ 1070.292765] ---[ end trace 0000000000000000 ]---
[ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150
[ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44
[ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246
[ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000
[ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27
[ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000
[ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000
[ 1070.302645] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000
[ 1070.303462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0
[ 1070.305004] Kernel panic - not syncing: Fatal exception
[ 1070.305711] Kernel Offset: disabled
[ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]---
Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Cc: stable@vger.kernel.org
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
|
|
v2: Add the last part of the ref count fix which was spotted by
Philipp Sieweck where the ref count of cpu writers is off due to
ERESTARTSYS or EBUSY during bo waits.
The initial GEM port broke refcounting on shareable (prime) surfaces and
memory evictions. The prime surfaces broke because the parent surfaces
weren't increasing the ref count on GEM surfaces, which meant that
the memory backing textures could have been deleted while the texture
was still accessible. The evictions broke due to a typo, the code was
supposed to exit if the passed buffers were not vmw_buffer_object
not if they were. They're tied because the evictions depend on having
memory to actually evict.
This fixes crashes with XA state tracker which is used for xrender
acceleration on xf86-video-vmware, apps/tests which use a lot of
memory (a good test being the piglit's streaming-texture-leak) and
desktops.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM")
Reported-by: Philipp Sieweck <psi@informatik.uni-kiel.de>
Cc: <stable@vger.kernel.org> # v5.17+
Reviewed-by: Maaz Mombasawala <mombasawalam@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220420040328.1007409-1-zack@kde.org
|
|
The mount option "explicit_open" manages the device open zone
resources to ensure that if an application opens a sequential file for
writing, the file zone can always be written by explicitly opening
the zone and accounting for that state with the s_open_zones counter.
However, if some zones are already open when mounting, the device open
zone resource usage status will be larger than the initial s_open_zones
value of 0. Ensure that this inconsistency does not happen by closing
any sequential zone that is open when mounting.
Furthermore, with ZNS drives, closing an explicitly open zone that has
not been written will change the zone state to "closed", that is, the
zone will remain in an active state. Since this can then cause failures
of explicit open operations on other zones if the drive active zone
resources are exceeded, we need to make sure that the zone is not
active anymore by resetting it instead of closing it. To address this,
zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request
into a REQ_OP_ZONE_RESET for sequential zones that have not been
written.
Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
|
|
Ensure that the i_flags field of struct zonefs_inode_info is cleared to
0 when initializing a zone file inode, avoiding seeing the flag
ZONEFS_ZONE_OPEN being incorrectly set.
Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close")
Cc: <stable@vger.kernel.org>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
|
|
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails:
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config':
pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce'
drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq':
pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq'
Select EINT_MTK for PINCTRL_MTK_V2 to fix this.
Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20220409105958.37412-1-yuehaibing@huawei.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The O_TMPFILE creation implementation creates a specific order of
operations for inode allocation/freeing and unlinked list
modification. Currently both are serialised by the AGI, so the order
doesn't strictly matter as long as the are both in the same
transaction.
However, if we want to move the unlinked list insertions largely out
from under the AGI lock, then we have to be concerned about the
order in which we do unlinked list modification operations.
O_TMPFILE creation tells us this order is inode allocation/free,
then unlinked list modification.
Change xfs_ifree() to use this same ordering on unlinked list
removal. This way we always guarantee that when we enter the
iunlinked list removal code from this path, we already have the AGI
locked and we don't have to worry about lock nesting AGI reads
inside unlink list locks because it's already locked and attached to
the transaction.
We can do this safely as the inode freeing and unlinked list removal
are done in the same transaction and hence are atomic operations
with respect to log recovery.
Reported-by: Frank Hofmann <fhofmann@cloudflare.com>
Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
In IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM, the M(ail): entry is
redundant with the L(ist): entry, remove the redundant M(ail): entry.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned
fields to be unsigned. This manifests as a compiler error such as:
/kisskb/src/fs/xfs/./xfs_trace.h:432:2: note: in expansion of macro 'TP_printk'
TP_printk("dev %d:%d daddr 0x%llx bbcount 0x%x hold %d pincount %d "
^
/kisskb/src/fs/xfs/./xfs_trace.h:440:5: note: in expansion of macro '__print_flags'
__print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
^
/kisskb/src/fs/xfs/xfs_buf.h:67:4: note: in expansion of macro 'XBF_UNMAPPED'
{ XBF_UNMAPPED, "UNMAPPED" }
^
/kisskb/src/fs/xfs/./xfs_trace.h:440:40: note: in expansion of macro 'XFS_BUF_FLAGS'
__print_flags(__entry->flags, "|", XFS_BUF_FLAGS),
^
/kisskb/src/fs/xfs/./xfs_trace.h: In function 'trace_raw_output_xfs_buf_flags_class':
/kisskb/src/fs/xfs/xfs_buf.h:46:23: error: initializer element is not constant
#define XBF_UNMAPPED (1 << 31)/* do not map the buffer */
as __print_flags assigns XFS_BUF_FLAGS to a structure that uses an
unsigned long for the flag. Since this results in the value of
XBF_UNMAPPED causing a signed integer overflow, the result is
technically undefined behavior, which gcc-5 does not accept as an
integer constant.
This is based on a patch from Arnd Bergman <arnd@arndb.de>.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
|
|
kmap() is being deprecated and these usages are all local to the thread
so there is no reason kmap_local_page() can't be used.
Replace kmap() calls with kmap_local_page().
Signed-off-by: Alaa Mohamed <eng.alaamohamedsoliman.am@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220419234328.10346-1-eng.alaamohamedsoliman.am@gmail.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
The tone generator frequency control just returns 0 on successful write,
not a boolean value indicating if there was a change or not. Compare
what was written with the value that was there previously so that
notifications are generated appropriately when the value changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Pull xtensa fixes from Max Filippov:
- fix patching CPU selection in patch_text
- fix potential deadlock in ISS platform serial driver
- fix potential register clobbering in coprocessor exception handler
* tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix a7 clobbering in coprocessor context load/store
arch: xtensa: platforms: Fix deadlock in rs_close()
xtensa: patch_text: Fixup last cpu should be master
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
"One patch to fix a use-after-free race related to the on-stack
z_erofs_decompressqueue, which happens very rarely but needs to be
fixed properly soon.
The other patch fixes some sysfs Sphinx warnings"
* tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors
erofs: fix use-after-free of on-stack io[]
|
|
This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662.
It turns out that making the pipe almost arbitrarily large has some
rather unexpected downsides. The kernel test robot reports a kernel
warning that is due to pipe->max_usage now growing to the point where
the iter_file_splice_write() buffer allocation can no longer be
satisfied as a slab allocation, and the
int nbufs = pipe->max_usage;
struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec),
GFP_KERNEL);
code sequence there will now always fail as a result.
That code could be modified to use kvcalloc() too, but I feel very
uncomfortable making those kinds of changes for a very niche use case
that really should have other options than make these kinds of
fundamental changes to pipe behavior.
Maybe the CRIU process dumping should be multi-threaded, and use
multiple pipes and multiple cores, rather than try to use one larger
pipe to minimize splice() calls.
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/
Cc: Andrei Vagin <avagin@gmail.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The first "if" condition in __memcpy_flushcache is supposed to align the
"dest" variable to 8 bytes and copy data up to this alignment. However,
this condition may misbehave if "size" is greater than 4GiB.
The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both
arguments to unsigned int and selects the smaller one. However, the
cast truncates high bits in "size" and it results in misbehavior.
For example:
suppose that size == 0x100000001, dest == 0x200000002
min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1;
...
dest += 0x1;
so we copy just one byte "and" dest remains unaligned.
This patch fixes the bug by replacing unsigned with size_t.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch fixes wrong initialization.
Fixes: 50c63009f6ab ("f2fs: avoid an infinite loop in f2fs_sync_dirty_inodes")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
holders
Let's attach io_flags to bio only, so that we can merge IOs given original
io_flags only.
Fixes: 64bf0eef0171 ("f2fs: pass the bio operation to bio_alloc_bioset")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
