summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-08-26media: venus: venc: set correct resolution on compressed streamStanimir Varbanov1-3/+5
This change the alignment restriction for output type of buffers only, also set corect input resolution and fill bidirectional vb2 queue flag in order to map output type buffers read/write. The last is needed by encoder firmware to add padding at the bottom of output (input buffers). Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: vb2: add bidirectional flag in vb2_queueStanimir Varbanov5-14/+31
This change is intended to give to the v4l2 drivers a choice to change the default behavior of the v4l2-core DMA mapping direction from DMA_TO/FROM_DEVICE (depending on the buffer type CAPTURE or OUTPUT) to DMA_BIDIRECTIONAL during queue_init time. Initially the issue with DMA mapping direction has been found in Venus encoder driver where the hardware (firmware side) adds few lines padding on bottom of the image buffer, and the consequence is triggering of IOMMU protection faults. This will help supporting venus encoder (and probably other drivers in the future) which wants to map output type of buffers as read/write. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Acked-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: g_/s_selection crop supportHugues Fruchet1-4/+370
Implements g_/s_selection crop support by using DCMI crop hardware feature. User can first get the maximum supported resolution of the sensor by calling g_selection(V4L2_SEL_TGT_CROP_BOUNDS). Then user call to s_selection(V4L2_SEL_TGT_CROP) will reset sensor to its maximum resolution and crop request is saved for later usage in s_fmt(). Next call to s_fmt() will check if sensor can do frame size request with crop request. If sensor supports only discrete frame sizes, the frame size which is larger than user request is selected in order to be able to match the crop request. Then s_fmt() resolution user request is adjusted to match crop request resolution. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: cleanup variable/fields namingsHugues Fruchet1-49/+54
Uniformize "pixfmt" variables to "pix". Change "current_fmt" & "dcmi_fmt" variables to variables with "sd_" prefix to explicitly refer to subdev format. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: revisit control register handlingHugues Fruchet1-10/+4
Simplify bits handling of DCMI_CR register. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: catch dma submission errorHugues Fruchet1-0/+4
Test cookie return by dmaengine_submit() and return error if any. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l: fwnode: Use a less clash-prone name for MAX_DATA_LANES macroSakari Ailus2-5/+6
Avoid using a generic name such as MAX_DATA_LANES in a header file widely included in drivers. Instead, call it V4L2_FWNODE_CSI2_MAX_DATA_LANES. Fixes: 4ee236219f6d ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l: fwnode: The clock lane is the first lane in lane_polaritiesSakari Ailus2-2/+2
The clock lane is the first lane in the lane_polarities array. Reflect this consistently by putting the number of data lanes after the number of clock lanes. Fixes: 4ee236219f6d ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: v4l: fwnode: Fix lane-polarities property parsingSakari Ailus1-3/+7
fwnode_property_read_u32_array() only returns the number of array elements if the array argument is NULL. The assumption that it always did so lead to lane-polarities properties never being read. Fixes: 4ee236219f6d ("media: v4l2-fwnode: suppress a warning at OF parsing logic") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: dw9714: Remove ACPI match tables, convert to use probe_newSakari Ailus1-15/+4
The ACPI match table is empty. Remove it. Also convert the drive to use probe_new callback in struct i2c_driver. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: dw9714: Add Devicetree supportSakari Ailus1-0/+7
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: dt-bindings: Add bindings for Dongwoon DW9714 voice coilSakari Ailus2-0/+10
Dongwoon DW9714 is a voice coil lens driver. Also add a vendor prefix for Dongwoon for one did not exist previously. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: venc: drop VP9 codec supportStanimir Varbanov1-4/+0
No one of the supported Venus version has implemented VP9 codec for enconding, so drop it from the list of codecs. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: use helper function to check supported codecsStanimir Varbanov2-16/+36
Use the helper function in decoder and encoder find_format to runtime check supported codecs. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: add helper to check supported codecsStanimir Varbanov2-0/+50
Adds a helper function to runtime check supported encoder and decoder codecs depending on venus version and platform. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: fill missing video_device nameStanimir Varbanov2-0/+2
This fills missing (forgotten) video device name with appropriate string so that udev can distinguishes between decoder and encoder devices. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: mark venc and vdec PM functions as __maybe_unusedStanimir Varbanov2-8/+4
Without PM support gcc could warns about unused functions, thus mark runtime_suspend/resume as __maybe_unused. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: ths8200: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: tc358743: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: saa7127: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: adv7842: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: adv7511: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: ad9389b: constify i2c_device_idArvind Yadav1-1/+1
i2c_device_id are not supposed to change at runtime. All functions working with i2c_device_id provided by <linux/i2c.h> work with const i2c_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: usb: make i2c_adapter constBhumika Goyal7-8/+8
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: radio-usb-si4713: make i2c_adapter constBhumika Goyal1-1/+1
Make this const as it is only used in a copy operation. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: pci: make i2c_adapter constBhumika Goyal8-9/+9
Make these const as they are only used in a copy operation. Done using Coccinelle Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: i2c: make device_type constBhumika Goyal1-1/+1
Make this const as it is only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: usb: make i2c_algorithm constBhumika Goyal2-2/+2
Make these const as they are only used in a copy operation or are stored in the algo field of i2c_adapter structure, which is const. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Acked-by: Mike Isely <isely@pobox.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-cec: use CEC_CAP_DEFAULTSHans Verkuil1-3/+1
Use the new CEC_CAP_DEFAULTS define in this driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stih-cec: use CEC_CAP_DEFAULTSHans Verkuil1-3/+1
Use the new CEC_CAP_DEFAULTS define in this driver. This also adds the CEC_CAP_RC capability which was missing here (and this is also the reason for this new define, to avoid missing such capabilities). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: vivid: fix incorrect HDMI input/output CEC loggingHans Verkuil1-4/+4
Only the first HDMI input has a CEC adapter, so just report 'HDMI 0' as the HDMI input name. For the HDMI outputs use bus_cnt instead of i as the output number. The HDMI name now corresponds to what 'v4l2-ctl --list-outputs' reports. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: vivid: add CEC pin monitoring emulationHans Verkuil1-1/+64
Add support to emulate CEC pin monitoring. There are few hardware devices that support this, so being able to emulate it here helps developing software for this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: cec: replace pin->cur_value by adap->cec_pin_is_highHans Verkuil5-8/+6
The current CEC pin value (0 or 1) was part of the cec_pin struct, but that assumes that CEC pin monitoring can only be used with a driver that uses the low-level CEC pin framework. But hardware that has both a high-level API and can monitor the CEC pin at low-level at the same time does not need to depend on the cec pin framework. To support such devices remove the cur_value field from struct cec_pin and add a cec_pin_is_high field to cec_adapter. This also makes it possible to drop the '#ifdef CONFIG_CEC_PIN' in cec-api.c. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: cec: ensure that adap_enable(false) is called from cec_delete_adapter()Hans Verkuil1-1/+3
When the adapter is removed the cec_delete_adapter() call attempts to set the physical address to INVALID by calling __cec_s_phys_addr() and so disabling the adapter. However, __cec_s_phys_addr checks if the device node was unregistered and just returns in that case. This means that the adap_enable callback is never called with 'false' to disable the CEC adapter. Most drivers don't care, but some need to do cleanup here. Change the test so the adapter is correctly disabled, even when the device node is unregistered. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: ddbridge: fix semicolon.cocci warningsFengguang Wu1-2/+2
drivers/media/pci/ddbridge/ddbridge-maxs8.c:145:2-3: Unneeded semicolon drivers/media/pci/ddbridge/ddbridge-maxs8.c:173:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Fixes: a43dbe430fb4 ("media: ddbridge: support MaxLinear MXL5xx based cards (MaxS4/8)") CC: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: isl6421: add checks for current overflowJemma Denson1-4/+72
This Kaffeine's BZ: https://bugs.kde.org/show_bug.cgi?id=374693 affects SkyStar S2 PCI DVB-S/S2 rev 3.3 device. It could be due to a Kernel bug. While checking the Isil 6421, comparing with its manual, available at: http://www.intersil.com/content/dam/Intersil/documents/isl6/isl6421a.pdf It was noticed that, if the output load is highly capacitive, a different approach is recomended when energizing the LNBf. Also, it is possible to detect if a current overload is happening, by checking an special flag. Add support for it. Tested on Skystar S2. Changes respect override_or option so should still work fine on cx88 based cards which disable dynamic current limit. Changes since v1: v2 - fixed incorrect checking of i2c return values v3 - fix if logic to check if dcl needs re-enabling - respect override_or values which aim to disable dcl - only do long sleep on overload if dcl enabled - add short sleep before re-enabling dcl - only check overload and potentially return EINVAL if device is on v4 - revert v3 sleep logic changes to remove tuning delays Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Jemma Denson <jdenson@gmail.com>
2017-08-20media: stv6111: return NULL instead of plain integerDaniel Scheller1-1/+1
Fixes: stv6111.c:665:24: warning: Using plain integer as NULL pointer Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: stv0910: declare global list_head stvlist staticDaniel Scheller1-1/+1
Cleans up smatch warning: symbol 'stvlist' was not declared. Should it be static? Patch originally submitted by Colin Ian King <colin.king@canonical.com>, remainder after the merge of all other stv0910 fixes. Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by: Daniel Scheller <d.scheller@gmx.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: rename RC_TYPE_* to RC_PROTO_* and RC_BIT_* to RC_PROTO_BIT_*Sean Young200-1158/+1204
RC_TYPE is confusing and it's just the protocol. So rename it. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: cec: fix remote control passthroughHans Verkuil3-5/+69
The 'Press and Hold' operation was not correctly implemented, in particular the requirement that the repeat doesn't start until the second identical keypress arrives. The REP_DELAY value also had to be adjusted (see the comment in the code) to achieve the desired behavior. The 'enabled_protocols' field was also never set, fix that too. Since CEC is a fixed protocol the driver has to set this field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: per-protocol repeat periodSean Young1-73/+65
CEC needs a keypress timeout of 550ms, which is too high for the IR protocols. Also fill in known repeat times, with 50ms error margin. Also, combine all protocol data into one structure. Signed-off-by: Sean Young <sean@mess.org> Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: saa7134: raw decoder can support any protocolSean Young1-1/+3
Any protocol for which we have a software decoder, can be enabled. Without this only the loaded protocol decoders can be selected. Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: ensure we do not read out of boundsSean Young1-1/+4
If rc_validate_filter() is called for CEC or XMP, then we would read beyond the end of the array. Suggested-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: simplify ir_raw_event_store_edge()Sean Young6-44/+10
Since commit 12749b198fa4 ("[media] rc: saa7134: add trailing space for timely decoding"), the workaround of inserting reset events is no longer needed. Note that the initial reset is not needed either; other rc-core drivers that don't use ir_raw_event_store_edge() never call this at all. Verified on a HVR-1150 and Raspberry Pi. Fixes: 3f5c4c73322e ("[media] rc: fix ghost keypresses with certain hw") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: saa7134: add trailing space for timely decodingSean Young3-22/+21
The gpio-ir-recv driver adds timeouts which the saa7134 lacks; this causes keypress not to arrive, and to only arrive once more IR is received. This is what the commit below calls "ghost keypresses", and that commit does not solve the issue completely. This makes the IR on the HVR-1150 much more reliable and responsive. Fixes: 3f5c4c73322e ("[media] rc: fix ghost keypresses with certain hw") Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc-core: improve ir_raw_store_edge() handlingSean Young3-25/+18
The gpio-ir-recv driver does many wakeups (once per edge); the saa7134 driver has special handling to only wakeup 15ms after the first edge. Make this part of rc-core so gpio-ir-recv also benefits from this (so a rc-5 keypress now causes 3 wakeups rather than 24). Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: winbond-cir: buffer overrun during transmitSean Young1-1/+1
We're reading beyond the buffer before checking its length. BUG: KASAN: slab-out-of-bounds in wbcir_irq_tx Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: mceusb: do not read data parameters unless requiredSean Young1-19/+17
This causes out-of-bounds read on device probe. BUG: KASAN: slab-out-of-bounds in mceusb_dev_printdata+0xdc/0x830 [mceusb] Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: lirc_zilog: driver only sends LIRCCODESean Young1-4/+4
This driver cannot send pulse, it only accepts driver-dependent codes. Cc: <stable@vger.kernel.org> # v3.2 Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: rc: add zx-irdec remote control driverShawn Guo6-1/+277
It adds the remote control driver and corresponding keymap file for IRDEC block found on ZTE ZX family SoCs. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 01:49:41 +0300