summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-19b43: read PHY info only when needed (for PHY-A)Rafał Miłecki1-1/+2
We risk reading TMSHIGH register twice, but PHY-A are really rare and we do not support them at the moment. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: separate ssb core resetRafał Miłecki1-2/+8
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: add helper for finding GPIO deviceRafał Miłecki1-20/+21
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: dma: cache translation (routing bits)Rafał Miłecki2-3/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: make b43_wireless_init less bus specificRafał Miłecki1-13/+10
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19b43: add helpers for block R/W opsRafał Miłecki2-10/+22
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc nexttbtt calculationFelix Fietkau1-1/+1
rounding up the delta between last-beacon-tsf and tsf to intval is wrong and can lead to misconfigured timers which breaks beacon transmission. Fix this by adding intval and subtracting the offset of the tsf within the current slot. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: Drag the driver to the year 2011Sujith Manoharan65-64/+80
The Times They Are a-Changin'. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath_hw: Fix bssid mask documentationMohammed Shafi Shajakhan1-6/+4
Signed-off-by: Mohammed Shafi Shajakhan <mshajakhan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix packet timeoutSujith Manoharan1-2/+2
The WMI tx status event timeout was not aligning with the TX cleanup timer threshold value. Fix this to handle dropped packets. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Change credit limit for UB94/95Sujith Manoharan1-1/+1
Reduce the credit size for UB94/95 to fix target hangs. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix max subframe handlingSujith Manoharan2-6/+1
Commit "ath9k_htc: Fix AMPDU subframe handling" registered the maximum subframe limit of the driver with mac80211, which was used in ADDBA negotiation. While technically correct, this causes inter-operability issues with a few APs. Revert to the older behavior to fix this. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix BSSID calculationSujith Manoharan2-23/+44
The BSSID/AID has to be set for the first associated station interface. Subsequent interfaces may move out of assoc/disassoc status, in which case, the BSSID has to be re-calculated from the available interfaces. Also, ANI should be enabled or disabled based on the current opmode. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix RX filter calculationSujith Manoharan1-0/+4
Choose the MY_BEACON filter only in case of a single interface. Also, set the ATH9K_RX_FILTER_MCAST_BCAST_ALL filter in case of interfaces. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Recalculate the BSSID mask on interfaceSujith Manoharan1-0/+2
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix station flagsSujith Manoharan2-9/+1
The FW does absolutely nothing with the station flags, so remove them. But keep the field around since it might come in handy in the future. Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k_htc: Fix mode selectionSujith Manoharan3-11/+6
Remove all the unsupported modes like FH, TURBO etc. Since this requires a FW update, increase the fw version to 1.3 Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19iwlwifi: remove unused parameter from iwl_hcmd_queue_reclaimDaniel Halperin1-3/+2
cmd_index is never used. Signed-off-by: Daniel Halperin <dhalperi@cs.washington.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19mwifiex: adjust high/low water marks for tx_pending queueMarc Yang2-2/+5
This is to fix an issue that the throughput of the higher priority stream gets dropped when a lower priority stream is present. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19mwifiex: CPU mips optimization with NO_PKT_PRIO_TIDMarc Yang2-0/+7
If we go through the entire for loop in mwifiex_wmm_get_highest_priolist_ptr() and don't find any packets, set highest_queued_prio to NO_PKT_PRIO_TID (< LOW_PRIO_TID). Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19mwifiex: check mwifiex_wmm_lists_empty() before dequeueMarc Yang1-1/+1
add checks to mwifiex_wmm_process_tx() loop so it doesn't re-enter mwifiex_dequeue_tx_packet() to find it can't send. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19mwifiex: reduce CPU usage by tracking highest_queued_prioMarc Yang2-3/+28
This patch adds highest_queued_prio to track priority of packets as they are enqueued so that mwifiex_wmm_get_highest_priolist_ptr() starts checking at the first level where we have packets, instead of the highest. The function also lowers priority value to the level where first packet is found. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19mwifiex: reduce CPU usage by tracking tx_pkts_queuedMarc Yang3-10/+19
This patch adds tx_pkts_queued to track number of packets being enqueued & dequeued so that mwifiex_wmm_lists_empty() evaluation is lightweight. Signed-off-by: Marc Yang <yangyang@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19net: rfkill: add generic gpio rfkill driverRhyland Klein4-0/+280
This adds a new generic gpio rfkill driver to support rfkill switches which are controlled by gpios. The driver also supports passing in data about the clock for the radio, so that when rfkill is blocking, it can disable the clock. This driver assumes platform data is passed from the board files to configure it for specific devices. Original-patch-by: Anantha Idapalapati <aidapalapati@nvidia.com> Signed-off-by: Rhyland Klein <rklein@nvidia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19ath9k: fix ad-hoc mode beacon selectionFelix Fietkau1-12/+20
In ad-hoc mode, beacon timers are configured differently compared to AP mode, and (depending on the scenario) can vary enough to make the beacon tasklet not detect slot 0 based on the TSF. Since staggered beacons are not (and cannot be) used in ad-hoc mode, it makes more sense to just hardcode slot 0 here, avoiding unnecessary TSF reads and calculations. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Reported-by: Rajkumar Manoharan <rmanoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-05-19Merge branch 'tip/perf/core' of ↵Ingo Molnar11-145/+1116
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
2011-05-19Merge branch 'tip/perf/core-3' of ↵Ingo Molnar1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/core
2011-05-19kmemleak: Initialise kmemleak after debug_objects_mem_init()Catalin Marinas1-1/+1
Kmemleak frees objects via RCU and when CONFIG_DEBUG_OBJECTS_RCU_HEAD is enabled, the RCU callback triggers a call to free_object() in lib/debugobjects.c. Since kmemleak is initialised before debug objects initialisation, it may result in a kernel panic during booting. This patch moves the kmemleak_init() call after debug_objects_mem_init(). Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Tested-by: Tejun Heo <tj@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: <stable@kernel.org>
2011-05-19kmemleak: Select DEBUG_FS unconditionally in DEBUG_KMEMLEAKCatalin Marinas1-1/+1
In the past DEBUG_FS used to depend on SYSFS and DEBUG_KMEMLEAK selected it conditionally. This is no longer the case, so always select DEBUG_FS via DEBUG_KMEMLEAK. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2011-05-19kmemleak: Do not return a pointer to an object that kmemleak did not getCatalin Marinas1-2/+5
The kmemleak_seq_next() function tries to get an object (and increment its use count) before returning it. If it could not get the last object during list traversal (because it may have been freed), the function should return NULL rather than a pointer to such object that it did not get. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Acked-by: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: <stable@kernel.org>
2011-05-19ALSA: hda - Enable Realtek ALC269 codec input layer beepMadis Janson1-0/+1
This fixes the input layer beep not working on some EeePC 1000 models by adding the subsystem id into whitelist. Otherwise the corresponding ALSA mixer is not enabled and stays muted, resulting in no console beep. Signed-off-by: Madis Janson <madis@cyber.ee> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-19input/atari: Fix mouse movement and button mappingGeert Uytterhoeven1-4/+4
Up and down movements were reversed, left and right buttons were swapped. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Fix atarimouse initMichael Schmitz2-4/+6
Atarimouse fails to load as a module (with ENODEV), due to a brown paper bag bug, misinterpreting the semantics of atari_keyb_init(). [geert] Propagate the return value of atari_keyb_init() everywhere Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19input/atari: Use the correct mouse interrupt hookMichael Schmitz3-8/+3
The Atari keyboard driver calls atari_mouse_interrupt_hook if it's set, not atari_input_mouse_interrupt_hook. Fix below. [geert] Killed off atari_mouse_interrupt_hook completely, after fixing another incorrect assignment in atarimouse.c. Signed-off-by: Michael Schmitz <schmitz@debian.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k/atari: Do not use "/" in interrupt namesGeert Uytterhoeven4-4/+4
It may trigger a warning in fs/proc/generic.c:__xlate_proc_name() when trying to add an entry for the interrupt handler to sysfs. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k: unistd - Comment out definitions for unimplemented syscallsGeert Uytterhoeven1-22/+24
Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k: Really wire up sys_pselect6 and sys_ppollGeert Uytterhoeven1-2/+2
We reserved the numbers a long time ago, but never wired them up in the syscall table as they need TIF_RESTORE_SIGMASK, which we only got last year in commit cb6831d5d3099e772a510eb3e1ed0760ccffb45e ("m68k: Switch to saner sigsuspend()") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org> Cc: stable@kernel.org
2011-05-19m68k: Merge mmu and non-mmu versions of sys_call_tableGeert Uytterhoeven3-445/+96
Impact for nommu: - Store table in .rodata instead of .text, - Let kernel/sys_ni.c handle the stubbing of MMU-only syscalls, - Implement sys_mremap and sys_nfsservct, - Remove unused padding at the end of the table. Impact for mmu: - Store table in .rodata instead of .data. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Greg Ungerer <gerg@uclinux.org>
2011-05-19MAINTAINERS: Roman Zippel has been MIA for several years.Geert Uytterhoeven1-5/+4
Hence make AFFS and HFS orphans, and remove him as an m68k maintainer. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k: bitops - Never step beyond the end of the bitmapGeert Uytterhoeven1-26/+55
find_next bitops on m68k (find_next_zero_bit, find_next_bit, and find_next_bit_le) may cause out of bounds memory access when the bitmap size in bits % 32 != 0 and offset (the bitnumber to start searching at) is very close to the bitmap size. For example, unsigned long bitmap[2] = { 0, 0 }; find_next_bit(bitmap, 63, 62); 1. find_next_bit() tries to find any set bits in bitmap[1], but no bits set. 2. Then find_first_bit(bimap + 2, -1) 3. Unfortunately find_first_bit() takes unsigned int as the size argument. 4. find_first_bit will access bitmap[2~] until it find any set bits. Add missing tests for stepping beyond the end of the bitmap to all find_{first,next}_*() functions, and make sure they never return a value larger than the bitmap size. Reported-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19m68k: bitops - offset == ((long)p - (long)vaddr) * 8Geert Uytterhoeven1-4/+2
Hence use "offset" in find_next_{,zero_}bit(), like is already done for find_next_{,zero_}bit_le() Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Akinobu Mita <akinobu.mita@gmail.com> Cc: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
2011-05-19ALSA: intel8x0m: enable AMD8111 modemDmitry Eremin-Solenikov1-2/+2
AMD 8111 southbridges contain a controller for MC'97 modem. Enable support for this controller in intel8x0m driver. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-19drivers/xen/sys-hypervisor: Cleanup code/data sections definitionsDaniel Kiper1-1/+1
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19arch/x86/xen/smp: Cleanup code/data sections definitionsDaniel Kiper1-4/+4
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19arch/x86/xen/time: Cleanup code/data sections definitionsDaniel Kiper1-4/+4
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19arch/x86/xen/xen-ops: Cleanup code/data sections definitionsDaniel Kiper1-1/+1
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19arch/x86/xen/mmu: Cleanup code/data sections definitionsDaniel Kiper1-17/+17
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: Daniel Kiper <dkiper@net-space.pl> [v1: Rebased on top of latest linus's to include fixes in mmu.c] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-05-19hwmon: (pmbus) Add support for Analog Devices ADM1275Guenter Roeck4-0/+192
Add support for Analog Devices ADM1275 Hot-Swap Controller and Digital Power Monitor Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health ↵Guenter Roeck4-1/+402
Controllers Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
2011-05-19hwmon: (pmbus) Add support for TI UCD9200 series of PWM System ControllersGuenter Roeck4-0/+333
This patch adds hardware monitoring support for TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 Digital PWM System Controllers. Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com> Reviewed-by: Tom Grennan <tom.grennan@ericsson.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 06:14:52 +0300