summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-10-20Merge tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds3-36/+48
Pull dma-mapping fixes from Christoph Hellwig: - fix more dma-debug fallout (Gerald Schaefer, Hamza Mahfooz) - fix a kerneldoc warning (Logan Gunthorpe) * tag 'dma-mapping-5.15-2' of git://git.infradead.org/users/hch/dma-mapping: dma-debug: teach add_dma_entry() about DMA_ATTR_SKIP_CPU_SYNC dma-debug: fix sg checks in debug_dma_map_sg() dma-mapping: fix the kerneldoc for dma_map_sgtable()
2021-10-20net/mlx5e: IPsec: Fix work queue entry ethernet segment checksum flagsEmeel Hakim1-9/+11
Current Work Queue Entry (WQE) checksum (csum) flags in the ethernet segment (eseg) in case of IPsec crypto offload datapath are not aligned with PRM/HW expectations. Currently the driver always sets the l3_inner_csum flag in case of IPsec because of the wrong usage of skb->encapsulation as indicator for inner IPsec header since skb->encapsulation is always ON for IPsec packets since IPsec itself is an encapsulation protocol. The above forced a failing attempts of calculating csum of non-existing segments (like in the IP|ESP|TCP packet case which does not have an l3_inner) which led to lots of packet drops hence the low throughput. Fix by using xo->inner_ipproto as indicator for inner IPsec header instead of skb->encapsulation in addition to setting the csum flags as following: * Tunnel Mode: * Pkt: MAC IP ESP IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs * * Transport Mode: * Pkt: MAC IP ESP L4 * CSUM: l3_cs [ | l4_cs (checksum partial case)] * * Tunnel(VXLAN TCP/UDP) over Transport Mode * Pkt: MAC IP ESP UDP VXLAN IP L4 * CSUM: l3_cs | l3_inner_cs | l4_inner_cs Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5e: IPsec: Fix a misuse of the software parser's fieldsEmeel Hakim1-24/+27
IPsec crypto offload current Software Parser (SWP) fields settings in the ethernet segment (eseg) are not aligned with PRM/HW expectations. Among others in case of IP|ESP|TCP packet, current driver sets the offsets for inner_l3 and inner_l4 although there is no inner l3/l4 headers relative to ESP header in such packets. SWP provides the offsets for HW ,so it can be used to find csum fields to offload the checksum, however these are not necessarily used by HW and are used as fallback in case HW fails to parse the packet, e.g when performing IPSec Transport Aware (IP | ESP | TCP) there is no need to add SW parse on inner packet. So in some cases packets csum was calculated correctly , whereas in other cases it failed. The later faced csum errors (caused by wrong packet length calculations) which led to lots of packet drops hence the low throughput. Fix by setting the SWP fields as expected in a IP|ESP|TCP packet. the following describe the expected SWP offsets: * Tunnel Mode: * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP IP L4 * * Transport Mode: * SWP: OutL3 OutL4 * Pkt: MAC IP ESP L4 * * Tunnel(VXLAN TCP/UDP) over Transport Mode * SWP: OutL3 InL3 InL4 * Pkt: MAC IP ESP UDP VXLAN IP L4 Fixes: f1267798c980 ("net/mlx5: Fix checksum issue of VXLAN and IPsec crypto offload") Signed-off-by: Emeel Hakim <ehakim@nvidia.com> Reviewed-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5e: Fix vlan data lost during suspend flowMoshe Shemesh3-12/+26
During suspend flow the driver calls mlx5e_destroy_vlan_table() which does not only delete the vlans steering flow rules, but also frees the data on currently active vlans, thus it is not restored during resume flow. This fix keeps the vlan data on suspend flow and frees it only on driver remove flow. Fixes: 6783f0a21a3c ("net/mlx5e: Dynamic alloc vlan table for netdev when needed") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5: E-switch, Return correct error code on group creation failureDmytro Linkin1-4/+3
Dan Carpenter report: The patch f47e04eb96e0: "net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups" from May 31, 2021, leads to the following Smatch static checker warning: drivers/net/ethernet/mellanox/mlx5/core/esw/qos.c:483 esw_qos_create_rate_group() warn: passing zero to 'ERR_PTR' If min rate normalization failed then error code may be overwritten to 0 if scheduling element destruction succeed. Ignore this value and always return initial one. Fixes: f47e04eb96e0 ("net/mlx5: E-switch, Allow setting share/max tx rate limits of rate groups") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20net/mlx5: Lag, change multipath and bonding to be mutually exclusiveMaor Dickman6-6/+18
Both multipath and bonding events are changing the HW LAG state independently. Handling one of the features events while the other is already enabled can cause unwanted behavior, for example handling bonding event while multipath enabled will disable the lag and cause multipath to stop working. Fix it by ignoring bonding event while in multipath and ignoring FIB events while in bonding mode. Fixes: 544fe7c2e654 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events") Signed-off-by: Maor Dickman <maord@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-10-20Merge tag 'sound-5.15-rc7' of ↵Linus Torvalds16-56/+157
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Again it became bigger than wished, unfortunately, as this contains quite a few ASoC fixes that came up a bit late. It also includes yet more HD- and USB-audio quirks: I decided to merge them now, as those are for stable, and we'll need them sooner or later. Although the volumes are a bit high, all changes are device-specific (and reasonably small) fixes, so it should be safe for the late rc" * tag 'sound-5.15-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Fix microphone sound on Jieli webcam. ALSA: hda/realtek: Fixes HP Spectre x360 15-eb1xxx speakers ALSA: usb-audio: Provide quirk for Sennheiser GSP670 Headset ALSA: hda/realtek: Add quirk for Clevo PC50HS ALSA: usb-audio: add Schiit Hel device to quirk table ASoC: wm8960: Fix clock configuration on slave mode ASoC: cs42l42: Ensure 0dB full scale volume is used for headsets ASoC: soc-core: fix null-ptr-deref in snd_soc_del_component_unlocked() ASoC: codec: wcd938x: Add irq config support ASoC: DAPM: Fix missing kctl change notifications ASoC: Intel: bytcht_es8316: Utilize dev_err_probe() to avoid log saturation ASoC: Intel: bytcht_es8316: Switch to use gpiod_get_optional() ASoC: Intel: bytcht_es8316: Use temporary variable for struct device ASoC: Intel: bytcht_es8316: Get platform data via dev_get_platdata() ASoC: wcd938x: Fix jack detection issue ASoC: nau8824: Fix headphone vs headset, button-press detection no longer working ASoC: cs4341: Add SPI device ID table ASoC: pcm179x: Add missing entries SPI to device ID table ASoC: fsl_xcvr: Fix channel swap issue with ARC ASoC: pcm512x: Mend accesses to the I2S_1 and I2S_2 registers
2021-10-20Merge tag 'audit-pr-20211019' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fix from Paul Moore: "One small audit patch to add a pointer NULL check" * tag 'audit-pr-20211019' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: fix possible null-pointer dereference in audit_filter_rules
2021-10-20Merge tag 'mt76-for-kvalo-2021-10-20' of https://github.com/nbd168/wirelessKalle Valo71-2539/+6114
mt76 patches for 5.16 * various bugfixes * endian fixes * mt7921 aspm support * cleanup * mt7921 testmode support * rate handling fixes * tx status fixes/improvements * mt7921 power management improvements * mt7915 LED support * DBDC fixes * mt7921 6GHz support * support for eeprom data in DT * mt7915 TWT support * mt7915 txbf + MU-MIMO improvements # gpg: Signature made Wed 20 Oct 2021 12:24:46 PM EEST # gpg: using DSA key D77D141D02A76EF5 # gpg: Good signature from "Felix Fietkau <nbd@nbd.name>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 75D1 1A7D 91A7 710F 4900 42EF D77D 141D 02A7 6EF5
2021-10-20ice: Add missing E810 device idsTony Nguyen3-0/+8
As part of support for E810 XXV devices, some device ids were inadvertently left out. Add those missing ids. Fixes: 195fb97766da ("ice: add additional E810 device id") Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Acked-by: Paul Menzel <pmenzel@molgen.mpg.de>
2021-10-20igc: Update I226_K device IDSasha Neftin1-1/+1
The device ID for I226_K was incorrectly assigned, update the device ID to the correct one. Fixes: bfa5e98c9de4 ("igc: Add new device ID") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20e1000e: Fix packet loss on Tiger Lake and laterSasha Neftin2-1/+13
Update the HW MAC initialization flow. Do not gate DMA clock from the modPHY block. Keeping this clock will prevent dropped packets sent in burst mode on the Kumeran interface. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213651 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213377 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20Merge tag 'trace-v5.15-rc5' of ↵Linus Torvalds2-42/+11
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fix from Steven Rostedt: "Recursion fix for tracing. While cleaning up some of the tracing recursion protection logic, I discovered a scenario that the current design would miss, and would allow an infinite recursion. Removing an optimization trick that opened the hole fixes the issue and cleans up the code as well" * tag 'trace-v5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Have all levels of checks prevent recursion
2021-10-20Merge tag 'nios2_fixes_for_v5.15_part2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fix from Dinh Nguyen: - Renamed CTL_STATUS to CTL_FSTATUS to fix a redefined warning * tag 'nios2_fixes_for_v5.15_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: irqflags: rename a redefined register name
2021-10-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds12-22/+80
Pull kvm fixes from Paolo Bonzini: "Tools: - kvm_stat: do not show halt_wait_ns since it is not a cumulative statistic x86: - clean ups and fixes for bus lock vmexit and lazy allocation of rmaps - two fixes for SEV-ES (one more coming as soon as I get reviews) - fix for static_key underflow ARM: - Properly refcount pages used as a concatenated stage-2 PGD - Fix missing unlock when detecting the use of MTE+VM_SHARED" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SEV-ES: reduce ghcb_sa_len to 32 bits KVM: VMX: Remove redundant handling of bus lock vmexit KVM: kvm_stat: do not show halt_wait_ns KVM: x86: WARN if APIC HW/SW disable static keys are non-zero on unload Revert "KVM: x86: Open code necessary bits of kvm_lapic_set_base() at vCPU RESET" KVM: SEV-ES: Set guest_state_protected after VMSA update KVM: X86: fix lazy allocation of rmaps KVM: SEV-ES: fix length of string I/O KVM: arm64: Release mmap_lock when using VM_SHARED with MTE KVM: arm64: Report corrupted refcount at EL2 KVM: arm64: Fix host stage-2 PGD refcount KVM: s390: Function documentation fixes
2021-10-20e1000e: Separate TGP board type from SPTSasha Neftin3-23/+46
We have the same LAN controller on different PCHs. Separate TGP board type from SPT which will allow for specific fixes to be applied for TGP platforms. Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Mark Pearson <markpearson@lenovo.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-10-20ucounts: Move get_ucounts from cred_alloc_blank to key_change_session_keyringEric W. Biederman2-2/+8
Setting cred->ucounts in cred_alloc_blank does not make sense. The uid and user_ns are deliberately not set in cred_alloc_blank but instead the setting is delayed until key_change_session_keyring. So move dealing with ucounts into key_change_session_keyring as well. Unfortunately that movement of get_ucounts adds a new failure mode to key_change_session_keyring. I do not see anything stopping the parent process from calling setuid and changing the relevant part of it's cred while keyctl_session_to_parent is running making it fundamentally necessary to call get_ucounts in key_change_session_keyring. Which means that the new failure mode cannot be avoided. A failure of key_change_session_keyring results in a single threaded parent keeping it's existing credentials. Which results in the parent process not being able to access the session keyring and whichever keys are in the new keyring. Further get_ucounts is only expected to fail if the number of bits in the refernece count for the structure is too few. Since the code has no other way to report the failure of get_ucounts and because such failures are not expected to be common add a WARN_ONCE to report this problem to userspace. Between the WARN_ONCE and the parent process not having access to the keys in the new session keyring I expect any failure of get_ucounts will be noticed and reported and we can find another way to handle this condition. (Possibly by just making ucounts->count an atomic_long_t). Cc: stable@vger.kernel.org Fixes: 905ae01c4ae2 ("Add a reference to ucounts for each cred") Link: https://lkml.kernel.org/r/7k0ias0uf.fsf_-_@disp2133 Tested-by: Yu Zhao <yuzhao@google.com> Reviewed-by: Alexey Gladkov <legion@kernel.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-10-20ptp: Fix possible memory leak in ptp_clock_register()Yang Yingliang1-4/+11
I got memory leak as follows when doing fault injection test: unreferenced object 0xffff88800906c618 (size 8): comm "i2c-idt82p33931", pid 4421, jiffies 4294948083 (age 13.188s) hex dump (first 8 bytes): 70 74 70 30 00 00 00 00 ptp0.... backtrace: [<00000000312ed458>] __kmalloc_track_caller+0x19f/0x3a0 [<0000000079f6e2ff>] kvasprintf+0xb5/0x150 [<0000000026aae54f>] kvasprintf_const+0x60/0x190 [<00000000f323a5f7>] kobject_set_name_vargs+0x56/0x150 [<000000004e35abdd>] dev_set_name+0xc0/0x100 [<00000000f20cfe25>] ptp_clock_register+0x9f4/0xd30 [ptp] [<000000008bb9f0de>] idt82p33_probe.cold+0x8b6/0x1561 [ptp_idt82p33] When posix_clock_register() returns an error, the name allocated in dev_set_name() will be leaked, the put_device() should be used to give up the device reference, then the name will be freed in kobject_cleanup() and other memory will be freed in ptp_clock_release(). Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: a33121e5487b ("ptp: fix the race between the release of ptp_clock and cdev") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: stmmac: Fix E2E delay mechanismKurt Kanzenbach1-1/+1
When utilizing End to End delay mechanism, the following error messages show up: |root@ehl1:~# ptp4l --tx_timestamp_timeout=50 -H -i eno2 -E -m |ptp4l[950.573]: selected /dev/ptp3 as PTP clock |ptp4l[950.586]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[950.586]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE |ptp4l[952.879]: port 1: new foreign master 001395.fffe.4897b4-1 |ptp4l[956.879]: selected best master clock 001395.fffe.4897b4 |ptp4l[956.879]: port 1: assuming the grand master role |ptp4l[956.879]: port 1: LISTENING to GRAND_MASTER on RS_GRAND_MASTER |ptp4l[962.017]: port 1: received DELAY_REQ without timestamp |ptp4l[962.273]: port 1: received DELAY_REQ without timestamp |ptp4l[963.090]: port 1: received DELAY_REQ without timestamp Commit f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") already addresses this problem for the dwmac v5.10. However, same holds true for all dwmacs above version v4.10. Correct the check accordingly. Afterwards everything works as expected. Tested on Intel Atom(R) x6414RE Processor. Fixes: 14f347334bf2 ("net: stmmac: Correctly take timestamp for PTPv2") Fixes: f2fb6b6275eb ("net: stmmac: enable timestamp snapshot for required PTP packets in dwmac v5.10a") Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20nfc: st95hf: Make spi remove() callback return zeroUwe Kleine-König1-4/+2
If something goes wrong in the remove callback, returning an error code just results in an error message. The device still disappears. So don't skip disabling the regulator in st95hf_remove() if resetting the controller via spi fails. Also don't return an error code which just results in two error messages. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20phy: micrel: ksz8041nl: do not use power down modeStefan Agner1-2/+3
Some Micrel KSZ8041NL PHY chips exhibit continuous RX errors after using the power down mode bit (0.11). If the PHY is taken out of power down mode in a certain temperature range, the PHY enters a weird state which leads to continuously reporting RX errors. In that state, the MAC is not able to receive or send any Ethernet frames and the activity LED is constantly blinking. Since Linux is using the suspend callback when the interface is taken down, ending up in that state can easily happen during a normal startup. Micrel confirmed the issue in errata DS80000700A [*], caused by abnormal clock recovery when using power down mode. Even the latest revision (A4, Revision ID 0x1513) seems to suffer that problem, and according to the errata is not going to be fixed. Remove the suspend/resume callback to avoid using the power down mode completely. [*] https://ww1.microchip.com/downloads/en/DeviceDoc/80000700A.pdf Fixes: 1a5465f5d6a2 ("phy/micrel: Add suspend/resume support to Micrel PHYs") Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: enetc: unmap DMA in enetc_send_cmd()Tim Gardner1-7/+11
Coverity complains of a possible dereference of a null return value. 5. returned_null: kzalloc returns NULL. [show details] 6. var_assigned: Assigning: si_data = NULL return value from kzalloc. 488 si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL); 489 cbd.length = cpu_to_le16(data_size); 490 491 dma = dma_map_single(&priv->si->pdev->dev, si_data, 492 data_size, DMA_FROM_DEVICE); While this kzalloc() is unlikely to fail, I did notice that the function returned without unmapping si_data. Fix this by refactoring the error paths and checking for kzalloc() failure. Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver") Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org (open list) Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net-core: use netdev_* calls for kernel messagesJesse Brandeburg1-12/+10
While loading a driver and changing the number of queues, I noticed this message in the kernel log: "[253489.070080] Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!" But I had no idea what interface was being talked about because this message used pr_warn(). After investigating, it appears we can use the netdev_* helpers already defined to create predictably formatted messages, and that already handle <unknown netdev> cases, in more of the messages in dev.c. After this change, this message (and others) will look like this: "[ 170.181093] ice 0000:3b:00.0 ens785f0: Number of in use tx queues changed invalidating tc mappings. Priority traffic classification disabled!" One goal here was not to change the message significantly from the original format so as to not break user's expectations, so I just changed messages that used pr_* and generally started with %s == dev->name. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20batman-adv: use eth_hw_addr_set() instead of ether_addr_copy()Jakub Kicinski1-1/+1
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Convert batman from ether_addr_copy() to eth_hw_addr_set(): @@ expression dev, np; @@ - ether_addr_copy(dev->dev_addr, np) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20mac802154: use dev_addr_set() - manualJakub Kicinski2-8/+9
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20mac802154: use dev_addr_set()Jakub Kicinski1-1/+1
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20batman-adv: prepare for const netdev->dev_addrJakub Kicinski5-13/+14
netdev->dev_addr will be constant soon, make sure the qualifier is propagated thru batman-adv. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20soc: fsl: dpio: Unsigned compared against 0 in qbman_swp_set_irq_coalescing()Tim Gardner1-6/+5
Coverity complains of unsigned compare against 0. There are 2 cases in this function: 1821 itp = (irq_holdoff * 1000) / p->desc->qman_256_cycles_per_ns; CID 121131 (#1 of 1): Unsigned compared against 0 (NO_EFFECT) unsigned_compare: This less-than-zero comparison of an unsigned value is never true. itp < 0U. 1822 if (itp < 0 || itp > 4096) { 1823 max_holdoff = (p->desc->qman_256_cycles_per_ns * 4096) / 1000; 1824 pr_err("irq_holdoff must be between 0..%dus\n", max_holdoff); 1825 return -EINVAL; 1826 } 1827 unsigned_compare: This less-than-zero comparison of an unsigned value is never true. irq_threshold < 0U. 1828 if (irq_threshold >= p->dqrr.dqrr_size || irq_threshold < 0) { 1829 pr_err("irq_threshold must be between 0..%d\n", 1830 p->dqrr.dqrr_size - 1); 1831 return -EINVAL; 1832 } Fix this by removing the comparisons altogether as they are incorrect. Zero is a possible value in either case. Also fix a minor comment typo and update the 2 pr_err() calls to use %u formatting as well as be more precise regarding the exact error. Fixes: ed1d2143fee5 ("soc: fsl: dpio: add support for irq coalescing per software portal") Cc: Ioana Ciornei <ioana.ciornei@nxp.com> Cc: Roy Pledge <Roy.Pledge@nxp.com> Cc: Li Yang <leoyang.li@nxp.com> Cc: linux-kernel@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: netdev@vger.kernel.org Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: dsa: qca8k: tidy for loop in setup and add cpu port checkAnsuel Smith1-30/+44
Tidy and organize qca8k setup function from multiple for loop. Change for loop in bridge leave/join to scan all port and skip cpu port. No functional change intended. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20Merge branch '100GbE' of ↵David S. Miller17-286/+764
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2021-10-19 This series contains updates to ice driver only. Brett implements support for ndo_set_vf_rate allowing for min_tx_rate and max_tx_rate to be set for a VF. Jesse updates DIM moderation to improve latency and resolves problems with reported rate limit and extra software generated interrupts. Wojciech moves a check for trusted VFs to the correct function, disables lb_en for switchdev offloads, and refactors ethtool ops due to differences in support for PF and port representor support. Cai Huoqing utilizes the helper function devm_add_action_or_reset(). Gustavo A. R. Silva replaces uses of allocation to devm_kcalloc() as applicable. Dan Carpenter propagates an error instead of returning success. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20Merge branch 'dev_addr-conversions-part-three'David S. Miller6-17/+31
Jakub Kicinski says: ==================== ethernet: manual netdev->dev_addr conversions (part 3) Manual conversions of Ethernet drivers writing directly to netdev->dev_addr (part 3 out of 3). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: via-velocity: use eth_hw_addr_set()Jakub Kicinski1-1/+3
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: via-rhine: use eth_hw_addr_set()Jakub Kicinski1-1/+3
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: tlan: use eth_hw_addr_set()Jakub Kicinski1-4/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, do the swapping, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: tehuti: use eth_hw_addr_set()Jakub Kicinski1-2/+4
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Break the address up into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: stmmac: use eth_hw_addr_set()Jakub Kicinski1-2/+6
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20ethernet: netsec: use eth_hw_addr_set()Jakub Kicinski1-7/+9
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20Merge branch 'hns3-fixes'David S. Miller10-23/+68
Guangbin Huang says: ==================== net: hns3: add some fixes for -net This series adds some fixes for the HNS3 ethernet driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: disable sriov before unload hclge layerPeng Li3-0/+23
HNS3 driver includes hns3.ko, hnae3.ko and hclge.ko. hns3.ko includes network stack and pci_driver, hclge.ko includes HW device action, algo_ops and timer task, hnae3.ko includes some register function. When SRIOV is enable and hclge.ko is removed, HW device is unloaded but VF still exists, PF will not reply VF mbx messages, and cause errors. This patch fix it by disable SRIOV before remove hclge.ko. Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix vf reset workqueue cannot exitYufeng Mo1-3/+3
The task of VF reset is performed through the workqueue. It checks the value of hdev->reset_pending to determine whether to exit the loop. However, the value of hdev->reset_pending may also be assigned by the interrupt function hclgevf_misc_irq_handle(), which may cause the loop fail to exit and keep occupying the workqueue. This loop is not necessary, so remove it and the workqueue will be rescheduled if the reset needs to be retried or a new reset occurs. Fixes: 1cc9bc6e5867 ("net: hns3: split hclgevf_reset() into preparing and rebuilding part") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: schedule the polling again when allocation failsYunsheng Lin1-10/+12
Currently when there is a rx page allocation failure, it is possible that polling may be stopped if there is no more packet to be reveiced, which may cause queue stall problem under memory pressure. This patch makes sure polling is scheduled again when there is any rx page allocation failure, and polling will try to allocate receive buffers until it succeeds. Now the allocation retry is added, it is unnecessary to do the rx page allocation at the end of rx cleaning, so remove it. And reset the unused_count to zero after calling hns3_nic_alloc_rx_buffers() to avoid calling hns3_nic_alloc_rx_buffers() repeatedly under memory pressure. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix for miscalculation of rx unused descYunsheng Lin2-0/+9
rx unused desc is the desc that need attatching new buffer before refilling to hw to receive new packet, the number of desc need attatching new buffer is calculated using next_to_use and next_to_clean. when next_to_use == next_to_clean, currently hns3 driver assumes that all the desc has the buffer attatched, but 'next_to_use == next_to_clean' also means all the desc need attatching new buffer if hw has comsumed all the desc and the driver has not attatched any buffer to the desc yet. This patch adds 'refill' in desc_cb to indicate whether a new buffer has been refilled to a desc. Fixes: 76ad4f0ee747 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: fix the max tx size according to user manualYunsheng Lin2-9/+4
Currently the max tx size supported by the hw is calculated by using the max BD num supported by the hw. According to the hw user manual, the max tx size is fixed value for both non-TSO and TSO skb. This patch updates the max tx size according to the manual. Fixes: 8ae10cfb5089("net: hns3: support tx-scatter-gather-fraglist feature") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: add limit ets dwrr bandwidth cannot be 0Guangbin Huang1-0/+9
If ets dwrr bandwidth of tc is set to 0, the hardware will switch to SP mode. In this case, this tc may occupy all the tx bandwidth if it has huge traffic, so it violates the purpose of the user setting. To fix this problem, limit the ets dwrr bandwidth must greater than 0. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: reset DWRR of unused tc to zeroGuangbin Huang1-0/+2
Currently, DWRR of tc will be initialized to a fixed value when this tc is enabled, but it is not been reset to 0 when this tc is disabled. It cause a problem that the DWRR of unused tc is not 0 after using tc tool to add and delete multi-tc parameters. For examples, after enabling 4 TCs and restoring to 1 TC by follow tc commands: $ tc qdisc add dev eth0 root mqprio num_tc 4 map 0 1 2 3 0 1 2 3 queues \ 8@0 8@8 8@16 8@24 hw 1 mode channel $ tc qdisc del dev eth0 root Now there is just one TC is enabled for eth0, but the tc info querying by debugfs is shown as follow: $ cat /mnt/hns3/0000:7d:00.0/tm/tc_sch_info enabled tc number: 1 weight_offset: 14 TC MODE WEIGHT 0 dwrr 100 1 dwrr 100 2 dwrr 100 3 dwrr 100 4 dwrr 0 5 dwrr 0 6 dwrr 0 7 dwrr 0 This patch fixes it by resetting DWRR of tc to 0 when tc is disabled. Fixes: 848440544b41 ("net: hns3: Add support of TX Scheduler & Shaper to HNS3 driver") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: hns3: Add configuration of TM QCN error eventJiaran Zhang2-1/+6
Add configuration of interrupt type and fifo interrupt enable of TM QCN error event if enabled, otherwise this event will not be reported when there is error. Fixes: d914971df022 ("net: hns3: remove redundant query in hclge_config_tm_hw_err_int()") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20powerpc/smp: do not decrement idle task preempt count in CPU offlineNathan Lynch1-2/+0
With PREEMPT_COUNT=y, when a CPU is offlined and then onlined again, we get: BUG: scheduling while atomic: swapper/1/0/0x00000000 no locks held by swapper/1/0. CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0-rc2+ #100 Call Trace: dump_stack_lvl+0xac/0x108 __schedule_bug+0xac/0xe0 __schedule+0xcf8/0x10d0 schedule_idle+0x3c/0x70 do_idle+0x2d8/0x4a0 cpu_startup_entry+0x38/0x40 start_secondary+0x2ec/0x3a0 start_secondary_prolog+0x10/0x14 This is because powerpc's arch_cpu_idle_dead() decrements the idle task's preempt count, for reasons explained in commit a7c2bb8279d2 ("powerpc: Re-enable preemption before cpu_die()"), specifically "start_secondary() expects a preempt_count() of 0." However, since commit 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") and commit f1a0a376ca0c ("sched/core: Initialize the idle task with preemption disabled"), that justification no longer holds. The idle task isn't supposed to re-enable preemption, so remove the vestigial preempt_enable() from the CPU offline path. Tested with pseries and powernv in qemu, and pseries on PowerVM. Fixes: 2c669ef6979c ("powerpc/preempt: Don't touch the idle task's preempt_count during hotplug") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015173902.2278118-1-nathanl@linux.ibm.com
2021-10-20powerpc/idle: Don't corrupt back chain when going idleMichael Ellerman1-4/+6
In isa206_idle_insn_mayloss() we store various registers into the stack red zone, which is allowed. However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again, to 0(r1), which corrupts the stack back chain. We used to do the same in isa206_idle_insn_mayloss() itself, but we fixed that in 73287caa9210 ("powerpc64/idle: Fix SP offsets when saving GPRs"), however we missed that the macro also corrupts the back chain. Corrupting the back chain is bad for debuggability but doesn't necessarily cause a bug. However we recently changed the stack handling in some KVM code, and it now relies on the stack back chain being valid when it returns. The corruption causes that code to return with r1 pointing somewhere in kernel data, at some point LR is restored from the stack and we branch to NULL or somewhere else invalid. Only affects Power8 hosts running KVM guests, with dynamic_mt_modes enabled (which it is by default). The fixes tag below points to the commit that changed the KVM stack handling, exposing this bug. The actual corruption of the back chain has always existed since 948cf67c4726 ("powerpc: Add NAP mode support on Power7 in HV mode"). Fixes: 9b4416c5095c ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au
2021-10-20Merge branch 'sja1105-next'David S. Miller5-47/+157
Vladimir Oltean says: ==================== New RGMII delay DT bindings for the SJA1105 DSA driver During recent reviews I've been telling people that new MAC drivers should adopt a certain DT binding format for RGMII delays in order to avoid conflicting interpretations. Some suggestions were better received than others, and it appears we are still far from a consensus. Part of the problem seems to be that there are still drivers that apply RGMII delays based on an incorrect interpretation of the device tree, and these serve as a bad example for others. I happen to maintain one of those drivers and I am able to test it, so I figure that one of the ways in which I can make a change is to stop providing a bad example. Therefore, this series adds support for the "rx-internal-delay-ps" and "tx-internal-delay-ps" properties inside sja1105 switch port DT nodes, and if these are present, they will decide what RGMII delays will the driver apply. The in-tree device trees are also updated to follow the new format, as well as the schema validator. I assume it's okay to get all changes merged in through the same tree (net-next). Although the DTS changes could be split, if needed - the driver works with or without them. There is one more DTS which should be changed, which is in Shawn's tree but not in net-next: https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux.git/tree/arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dts?h=for-next For that, I'd have to send a separate patch. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-20net: dsa: sja1105: parse {rx, tx}-internal-delay-ps properties for RGMII delaysVladimir Oltean3-47/+107
This change does not fix any functional issue or address any real life use case that wasn't possible before. It is just a small step in the process of standardizing the way in which Ethernet MAC drivers may apply RGMII delays (traditionally these have been applied by PHYs, with no clear definition of what to do in the case of a fixed-link). The sja1105 driver used to apply MAC-level RGMII delays on the RX data lines when in fixed-link mode and using a phy-mode of "rgmii-rxid" or "rgmii-id" and on the TX data lines when using "rgmii-txid" or "rgmii-id". But the standard definitions don't say anything about behaving differently when the port is in fixed-link vs when it isn't, and the new device tree bindings are about having a way of applying the delays in a way that is independent of the phy-mode and of the fixed-link property. When the {rx,tx}-internal-delay-ps properties are present, use them, otherwise fall back to the old behavior and warn. One other thing to note is that the SJA1105 hardware applies a delay value in degrees rather than in picoseconds (the delay in ps changes depending on the frequency of the RGMII clock - 125 MHz at 1G, 25 MHz at 100M, 2.5MHz at 10M). I assume that is fine, we calculate the phase shift of the internal delay lines assuming that the device tree meant gigabit, and we let the hardware scale those according to the link speed. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20210723173108.459770-6-prasanna.vengateshan@microchip.com/ Link: https://patchwork.ozlabs.org/project/netdev/patch/20200616074955.GA9092@laureti-dev/#2461123 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 00:26:54 +0300