summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-07-24Merge tag 'zynq-dt-for-3.17-2' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann1-0/+18
Merge "arm: Xilinx Zynq dt patches for v3.17 second pull request" from Michal Simek: - Add GPIO and XADC node to dtsi * tag 'zynq-dt-for-3.17-2' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Add GPIO node ARM: zynq: DT: Add XADC node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-24Merge tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu into next/dtArnd Bergmann1-0/+3
Merge "mvebu DT changes for v3.17 (round 3)" from Jason Cooper: - Armada 375 - Fix ethernet aliases for new node added for v3.17 - Add missing MDIO clock for new node added for v3.17 * tag 'mvebu-dt-3.17-3' of git://git.infradead.org/linux-mvebu: ARM: mvebu: Add missing MDIO clock in Armada 375 ARM: mvebu: Add ethernet aliases required by U-Boot Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-07-23ARM: zynq: DT: Add GPIO nodeSoren Brinkmann1-0/+10
Add node describing Zynq's GPIO controller. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-23ARM: zynq: DT: Add XADC nodeSoren Brinkmann1-0/+8
Add node for the Xilinx A/D Converter. Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-23ARM: mvebu: Add missing MDIO clock in Armada 375Ezequiel Garcia1-0/+1
In Armada 375 SoCs, the MDIO is handled by a separate orion-mdio driver, despite the register is contained within the "LMS" block of the network controller. Therefore we need to add the clock to the MDIO devicetree to prevent the controller from being accesed with its clock gated. This is needed, for instance, to be able to load the MDIO driver before the network driver. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Link: https://lkml.kernel.org/r/1405961296-5846-7-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-23ARM: mvebu: Add ethernet aliases required by U-BootMarcin Wojtas1-0/+2
The vendor bootloader provided for Armada 375 boards expect an alias for the ethernet nodes, which is used to fixup the MAC address. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Link: https://lkml.kernel.org/r/1405961296-5846-6-git-send-email-ezequiel.garcia@free-electrons.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2014-07-20Merge tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson13-27/+186
Merge "ARM: mvebu: DT changes for v3.17 (round 2)" from Jason Cooper: mvebu DT changes for v3.17 (round 2): - kirkwood * Add d2 Network v2 board - mvebu * Add Armada 375 ethernet node * Add CA9 MPcore SoC controller node * Add support for dynamic freq scaling on Armada XP * tag 'mvebu-dt-3.17-2' of git://git.infradead.org/linux-mvebu: ARM: mvebu: update Armada XP DT for dynamic frequency scaling ARM: mvebu: add CA9 MPcore SoC Controller node ARM: mvebu: Enable the network controller in Armada 375 DB board ARM: mvebu: Add support for the network controller in Armada 375 SoC ARM: Kirkwood: add DT support for d2 Network v2 ARM: Kirkwood: allow to use netxbig DTSI for d2net_v2 DTS Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20Merge tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu into next/dtOlof Johansson7-3/+309
Merge "ARM: mvebu: DT changes for v3.17" from Jason Cooper: mvebu DT changes for v3.17 - kirkwood * add boards net2big and net5big - dove * add vendor prefix for SolidRun * split CuBox into it's variants * tag 'mvebu-dt-3.17' of git://git.infradead.org/linux-mvebu: ARM: kirkwood: fix net5big regulator gpio assignments ARM: dts: mvebu: split SolidRun CuBox into variants dt-binding: add vendor prefix for SolidRun ARM: Kirkwood: Add DT descriptions for net2big and net5big. Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-20Merge tag 'samsung-dt' of ↵Olof Johansson15-475/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Merge "Samsung DT updates for v3.17" from Kukjin Kim: exynos3250: add i2s dt for audio interface exynos4 - cleanup arm-pmu node because of 4 pmu on exynos4412 but 2 pmu on other exynos4 SoCs - add support sub-nodes to exynos usb host for exynos4 exynos4412-odroid-common - fix T-FLASH hotplug detection - disable 'always on' for BUCK8 - add support for GPIO based buttons - add MAX98090 audio codec exynos4412-odroidx2 and exynos4412-odroidu3 - refactor exynos4412-odroidx and exynos4412-odroid-common for odroid-x2 and u2/u3 exynos4412-odroidx - add support for USB phy, host and device - enable common hardware blocks, secure firmware calls, watchdog, g2d and fimc (mem2mem) multimedia accelerators - add support for USB phy, host and device - correct memory size exynos5410 - fill in CPU clock-frequency property to avoid warning exynos5420 - remove display pd because of instability exynos5420-peach-pit and exynos5800-peach-pi - sort nodes each other to check its differences easily - enable audio support and add sound-card name property - add mask-tpm-reset node - add cros_ec including keyboard, i2c tunnel and tps65090 and battery under the i2c tunnel * tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Add I2S dt node for exynos3250 ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-pi ARM: dts: clean up arm-pmu node for exynos4 ARM: dts: remove display power domain for exynos5420 ARM: dts: Add sound nodes for Odroid-X2/U3 boards ARM: dts: fix T-FLASH hotplug detection for exynos4412-odroid-common ARM: dts: add support for GPIO buttons for exynos4412-odroid ARM: dts: disable 'always on' for BUCK8 regulator for exynos4412-odroid-common ARM: dts: refactor Odroid DTS file and add support for Odroid X2 and U2/U3 ARM: dts: correct memory size for exynos4412-odroidx ARM: dts: add support for USB phy, host and device for exynos4412-odroidx ARM: dts: enable common hardware blocks for exynos4412-odroidx ARM: dts: add port sub-nodes to exynos usb host modules for exynos4 ARM: dts: Add mask-tpm-reset node in exynos5800-peach-pi ARM: dts: Add mask-tpm-reset node in exynos5420-peach-pit ARM: dts: Add sound-card name for Snow/Peach-Pit/Peach-Pi ARM: dts: Fill in CPU clock-frequency for exynos5410 ARM: dts: Sort nodes within Peach-pit/Peach-pi dts files ARM: dts: Enable audio support for exynos5800-peach-pi
2014-07-19Merge tag 'tegra-for-3.17-dt' of ↵Olof Johansson71-1055/+2797
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.17" from Thierry Reding: - New board support: * Apalis T30 - HDA support for Tegra124 and Venice2 - Display on Medcom Wide and Roth - GK20A support on Tegra124 - XUSB pad controller for Tegra124 and Jetson TK1 - Various cleanups This pulls in the for-3.17/fuse-move, for-3.17/dt-cros-ec-kbd and for-3.17/xusb-padctl branches to resolve dependencies. Note that the Apalis T30 support has a runtime dependency on the for-3.17/pcie-regulators branch, so they should preferably be applied in that order. I didn't merge that branch into this because Apalis T30 support is new, therefore can't regress, and because the dependency exists only at runtime. * tag 'tegra-for-3.17-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits) ARM: tegra: roth: add display DT node ARM: tegra: Fix typoed ams,ext-control properties ARM: tegra: jetson-tk1: Add XUSB pad controller ARM: tegra: tegra124: Add XUSB pad controller ARM: tegra: add GK20A GPU to Tegra124 DT ARM: tegra: of: add GK20A device tree binding ARM: tegra: roth: enable input on mmc clock pins ARM: tegra: roth: fix unsupported pinmux properties ARM: tegra: Migrate Apalis T30 PCIe power supply scheme ARM: tegra: tamonten: add the display to the Medcom Wide ARM: tegra: tamonten: add the base board regulators ARM: tegra: initial support for apalis t30 ARM: tegra: jetson-tk1: mark eMMC as non-removable ARM: tegra: venice2 - Enable HDA ARM: tegra: Add Tegra124 HDA support ARM: tegra: Add the EC i2c tunnel to tegra124-venice2 soc/tegra: fuse: fix dummy functions soc/tegra: fuse: move APB DMA into Tegra20 fuse driver soc/tegra: Add efuse and apbmisc bindings soc/tegra: Add efuse driver for Tegra ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'tegra-for-3.17-xusb-padctl' of ↵Olof Johansson5-0/+1114
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: Add XUSB pad controller support" from Thierry Reding: Adds device tree bindings and a driver for the XUSB pad controller found on Tegra114 and later. This is a prerequisites for PCIe, SATA and XUSB drivers which are all currently being reviewed or pending for merge. This is a separate branch in case it needs to be pulled into the pinctrl tree to resolve conflicts. * tag 'tegra-for-3.17-xusb-padctl' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: pinctrl: Add NVIDIA Tegra XUSB pad controller support of: Add NVIDIA Tegra XUSB pad controller binding Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'sunxi-dt-for-3.17' of ↵Olof Johansson22-13/+1121
git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/dt Merge "Allwinner DT additions for 3.17" from Maxime Ripard: Among the few patches that we have so far, there's a few noticeable changes: - Introduction of the Allwinner A23 SoC - Support for the GMAC on the A31. This is only available so far on the boards which bootloader enable the PHY regulator. - Addition of the infrared receiver * tag 'sunxi-dt-for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (22 commits) ARM: dts: sun6i: Add Merrii A31 Hummingbird support ARM: dts: sun6i: Add ethernet alias for GMAC ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller node ARM: dts: sun6i: Add GMAC clock node to the A31 dtsi ARM: dts: sun6i: Add pin muxing options for GMAC ARM: sun8i: Add PRCM clock and reset controller nodes to the DTSI ARM: sun8i: Add reset controller nodes to the DTSI ARM: sun8i: Add basic clock nodes to the DTSI ARM: dts: sun4i: Add ir node to various boards ARM: dts: sun4i: Add ir controller nodes and pinmux ARM: dts: sun4i: Add new ba10-tvbox board ARM: dts: sun7i: Add board support for LinkSprite pcDuino V3 ARM: dts: sun7i: Add ir receiver support to a20-i12-tvbox ARM: dts: sun7i: Rename sun7i-a20-ir to sun4i-a10-ir ARM: dts: sun7i: Add AXP209 support to various boards ARM: dts: sun4i: Add AXP209 support to various boards ARM: dts: sunxi: Add #interrupt-cells to pinctrl nodes ARM: sun8i: dt: Add Ippo-q8h v5 support ARM: sunxi: Add Allwinner A23 dtsi ARM: sunxi: Add IR controllers on A20 to dtsi ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx into next/dtOlof Johansson206-790/+1649
Merge "Xilinx Zynq changes for v3.17" from Michal Simek: arm: Xilinx Zynq dt patches for v3.17 - Document and use new cadence serial binding * tag 'zynq-dt-for-3.17' of git://git.xilinx.com/linux-xlnx: ARM: zynq: DT: Migrate UART to Cadence binding tty: cadence: Document DT binding + Linux 3.16-rc5 Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'imx-dt-3.17' of ↵Olof Johansson189-5052/+9498
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree updates for 3.17" from Shawn Guo: The i.MX device tree updates for 3.17: - Add device tree sources and pin function header for i.MX6SX SoC - Initial imx6sx-sdb board support with FEC, MMC, USB, PMIC, Audio and GPIO key enabled - New board support: mbimxsd25 and mbimxsd27 from Eukrea, aristainetos imx6dl boards, Rex Pro and Basic, Ka-Ro TX6 - Restructure imx6qdl-wandboard.dtsi for new rev C1 board - Split M28EVK and M53EVK into SoM and EVK parts - A few correction around SDMA, SSI and SATA device nodes - Add eSATA support for Cubox-i board - Updates on edmqmx6 to enable PCIe, I2C and CAN - Use DT macro for clock ID for imx27 and imx6qdl - Add FlexCAN support for VF610 SoC * tag 'imx-dt-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (125 commits) ARM: dts: vf610: add FlexCAN node ARM: dts: add initial Rex Basic board support ARM: dts: add initial Rex Pro board support ARM: dts: mx5: Split M53EVK into SoM and EVK parts ARM: dts: imx6: RIoTboard explicitly define pad settings ARM: dts: vf610: fix length of eshdc1 register property ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board. ARM: dts: imx53: correct clock-names of SATA node ARM: imx6: Align ssi nodes between mx6 variants ARM: i.MX27 clk: dts: Use clock defines in DTS files ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sx ARM: dts: imx6sx-sdb: Add audio support ARM: dts: imx6sx: Pass the fsl,fifo-depth property ARM: dts: imx6sx: Fix sdma node ARM: dts: imx6: edmqmx6: Add can bus ARM: dts: imx6: edmqmx6: Add two other i2c buses ARM: dts: imx6: edmqmx6: Add PCIe support ARM: dts: imx25-pdk: Add USB OTG support ARM: dts: i.MX53: add aipstz nodes ARM: dts: mxs: Split M28EVK into SoM and EVK parts ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'keystone-dts' of ↵Olof Johansson6-4/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/dt Merge "Keystone DTS update for 3.17" from Santosh Shilimkar: Keystone DTS update for 3.17 - Ethernet clock tree fix. - MDIO device tree node. Respective driver update is already queued. - Ethernet phy node. Respective driver update is already queued. * tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-evm: add 1g ethernet phys nodes ARM: dts: keystone: add mdio devices entries ARM: dts: keystone: fix netcp's clocks definitions Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'omap-for-v3.17/dt-part1' of ↵Olof Johansson30-4230/+2084
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren: First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk * tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits) ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) ARM: DTS: omap5-uevm: Add node for twl6040 audio codec ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock ARM: dts: dra7: Add dt data for PCIe controller ARM: dts: dra7: Add dt data for PCIe PHY ARM: dts: dra7: Add dt data for PCIe PHY control module ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock ARM: dts: dra7-evm: Add regulator information to USB2 PHYs ARM: omap2plus_defconfig: enable TPS65218 configs ARM: dts: AM437x: Add TPS65218 device tree nodes ARM: dts: AM437x: Fix i2c nodes indentation ARM: dts: AM43x: Add TPS65218 device tree nodes ARM: dts: Add devicetree for Gumstix Pepper board ARM: dts: dra7: add crossbar device binding ARM: dts: dra7: add routable-irqs property for gic node ARM: OMAP24xx: clock: remove legacy clock data ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19Merge tag 'renesas-dt3-for-v3.17' of ↵Olof Johansson24-94/+468
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Merge "Third Round of Renesas ARM Based SoC DT Updates for v3.17" from Simon Horman: * Initialise SCI using DT when booting the kzm9g, armadillo800eva, ape6evm and bockw boards without legacy-C code. * tag 'renesas-dt3-for-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (24 commits) ARM: shmobile: kzm9g-reference: Initialise SCIF device using DT ARM: shmobile: sh73a0: Add SCIF nodes ARM: shmobile: armadillo800eva-reference: Initialise SCIF device using DT ARM: shmobile: r8a7740: Add SCIF nodes ARM: shmobile: ape6evm-reference: Initialise SCIF device using DT ARM: shmobile: r8a73a4: Add SCIF nodes ARM: shmobile: bockw-reference: Initialise SCIF device using DT ARM: shmobile: r8a7778: Add SCIF nodes ARM: shmobile: sh73a0: add SCI clock support for DT ARM: shmobile: r8a7740: correct SCI clock support for DT ARM: shmobile: r8a73a4: add SCI clock support for DT ARM: shmobile: r8a7778: add SCI clock support for DT ARM: shmobile: r8a7790: lager: use iic cores instead of i2c ARM: shmobile: Lager: Correct I2C bus for VDD MPU regulator ARM: shmobile: kzm9g-reference: Remove early_printk from command line ARM: shmobile: armadillo800eva-reference: Remove early_printk from command line ARM: shmobile: r8a7779: Consistently use tabs for indentation ARM: shmobile: henninger: Consistently use tabs for indentation ARM: shmobile: henninger: enable internal PCI ARM: shmobile: koelsch: enable internal PCI ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19ARM: dts: sun6i: Add Merrii A31 Hummingbird supportMaxime Ripard2-0/+120
This adds support for the A31 Hummingbird: http://www.merrii.com/en/pla_d.asp?id=172 The Merrii A31 Hummingbird is a development board based on the Allwinner A31 SoC with multiple USB ports through a USB hub chip, a uSD slot, a 10/100/1000M ethernet port, an AP6210 WiFi/BT chip, TV-in, HDMI, VGA, audio in/out ports, and LCD/CSI headers. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wens@csie.org: enable usbphy, ehci0, ohci0 for on-board usb hub; add pcf8563 rtc node; add comments for i2c0 and mmc0 pull-ups; correct ethernet phy address to 0x01; drop uart2 (BT chip has no power) and uart3 (no device); use proper commit message] Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2014-07-19ARM: dts: sun6i: Add ethernet alias for GMACChen-Yu Tsai1-0/+1
Alias GMAC as ethernet0 so U-boot can fill in the MAC address. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add A31 GMAC gigabit ethernet controller nodeChen-Yu Tsai1-0/+17
The A31 has the same GMAC found on the A20 SoC, except it has an extra reset control. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add GMAC clock node to the A31 dtsiChen-Yu Tsai1-0/+28
The GMAC uses 1 of 2 sources for its transmit clock, depending on the PHY interface mode. Add both sources as dummy clocks, and as parents to the GMAC clock node. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-19ARM: dts: sun6i: Add pin muxing options for GMACChen-Yu Tsai1-0/+42
The A31 SoC has a GMAC gigabit ethernet controller supporting MII, GMII, RGMII modes. Add pin muxing options for these modes. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2014-07-18ARM: dts: Add I2S dt node for exynos3250Tomasz Figa1-0/+13
This patch add I2S (Inter-IC Sound) dt node which supports 1-port stereo (1 channels) IIS-bus for audio interface with DMA-based operation. Signed-off-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Inha Song <ideal.song@samsung.com> Tested-by: Inha Song <ideal.song@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: dts: Add cros_ec to exynos5420-peach-pit and exynos5800-peach-piDoug Anderson2-0/+290
This adds cros_ec to exynos5420-peach-pit and exynos5800-peach-pi, including: * The keyboard * The i2c tunnel * The tps65090 under the i2c tunnel * The battery under the i2c tunnel To add extra motivation, it should be noted that tps65090 is one of the things needed to get display-related FETs turned on for pit and pi. Signed-off-by: Doug Anderson <dianders@chromium.org> Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Tushar Behera <tushar.b@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: dts: clean up arm-pmu node for exynos4Chanho Park4-12/+10
This patch cleans a arm-pmu node up for exynos4. Only exynos4412 series boards have four pmu interrupts. Rest of exynos4 boards, except 4412, have only two pmu interrupts. Thus, we can define two interrupts in the exynos4.dtsi and extends the interrupts only exynos4412.dtsi. Cc: Chanwoo Choi <cw00.choi@samsung.com> Cc: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Tested-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-07-18ARM: zynq: DT: Migrate UART to Cadence bindingSoren Brinkmann1-4/+4
The Zynq UART is Cadence IP and the driver has been renamed accordingly. Migrate the DT to use the new binding for the UART driver. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-18tty: cadence: Document DT bindingSoren Brinkmann1-0/+20
Add binding documentation for the Cadence UART. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Rob Herring <robh@kernel.org> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2014-07-18ARM: dts: vf610: add FlexCAN nodeStefan Agner1-0/+23
Add FlexCAN node for the two FlexCAN IP instances in Vybrid. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: add initial Rex Basic board supportRobert Nelson2-0/+31
Add initial Rex Pro i.mx6dl board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6dl-rex-basic.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: add initial Rex Pro board supportRobert Nelson3-0/+392
Add initial Rex Pro i.mx6q board support. Ethernet, UART, USB, I2C, SPI, HDMI, Audio, and SDHC cards are working. Currently no mainline u-boot, so boot with cat zImage imx6q-rex-pro.dtb > zImage.dtb, then using mkimage create uImage Signed-off-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: mx5: Split M53EVK into SoM and EVK partsMarek Vasut2-108/+144
This patch splits the M53EVK device tree file into a common SoM part and an EVK part. This is needed to make it easier for users of the SoM to put it into different, non-reference baseboard. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: RIoTboard explicitly define pad settingsIain Paton1-16/+16
Instead of relying on defaults or bootloader settings, explicitly define all pad settings. This resolves reported issues of no analogue audio output. Signed-off-by: Iain Paton <ipaton0@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: vf610: fix length of eshdc1 register propertyStefan Agner1-1/+1
Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: Restructure imx6qdl-wandboard.dtsi for new rev C1 board.George Joseph8-23/+135
The rev C1 Wandboard uses the Broadcom 4330 for WiFi and Bluetooth instead of the 4329. This changes the PADS assigned for the control lines. Another side effect of the change is that on the rev C1 board, usdhc driver can't detect the chip presence correctly so usdhc2 now needs its 'non-removeable' property removed. So that rev B1 and earlier can continue to work, this patch splits the board-specific definitions from imx6qdl-wandboard.dtsi into imx6qdl-wandboard-revb1.dtsi and imx6qdl-wandboard-revc1.dtsi. The new files include the original base imx6qdl-wandboard.dtsi which retains the common definitions. The existing imx6dl-wandboard.dts includes imx6qdl-wandboard-revc1.dtsi and imx6dl-wandboard-revb1.dts (new) includes imx6qdl-wandboard-revb1.dtsi. This makes the rev C1 board the new default. The same pattern is used for imx6q-wandboard.dts. So, from U-Boot on a WB-Quad you use imxq-wandboard-revb1.dtb for the older B1 board and imxq-wandboard.dtb for the current rev C1 board. Signed-off-by: George Joseph <george.joseph@fairview5.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx53: correct clock-names of SATA nodeShawn Guo1-1/+1
Per the binding doc imx-sata.txt, the first entry of clock-names should be "sata" than anything else. Correct it for imx53 SATA node. It works for now only because SATA driver gets clock by index so far. Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: imx6: Align ssi nodes between mx6 variantsFabio Estevam3-15/+9
Since commit 98ea6ad2edd2 (ARM: dts: imx6: use imx51-ssi) the mx6 ssi is compatible with imx51, so align all the mx6 variant ssi compatible strings as: compatible = "fsl,<imx6-soc>-ssi", "fsl,imx51-ssi"; Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: i.MX27 clk: dts: Use clock defines in DTS filesAlexander Shiyan4-44/+77
Use clock definitions in i.MX27 DTS files. Additional changes included in this patch (imx27.dtsi): - Fix IPG clock for UART6. - Use EMI_AHB_GATE clock for WEIM. - Added GPIO_IPG_GATE clock for GPIO nodes. Currently this clock is not used by the driver, but it can be added in the future. Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx: correct sdma compatbile for imx6sl and imx6sxShawn Guo2-2/+2
The SDMA on imx6sl and imx6sx is more compatible with imx6q one than imx35. Let's use "fsl,imx6q-sdma" instead of "fsl,imx35-sdma", so that SDMA ROM script on imx6sl and imx6sx can work for audio driver just like the case of imx6q. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Acked-by: Robin Gong <yibin.gong@freescale.com>
2014-07-18ARM: dts: imx6sx-sdb: Add audio supportFabio Estevam1-0/+72
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sx: Pass the fsl,fifo-depth propertyFabio Estevam1-0/+3
Like the other mx6 variants, we need to pass fsl,fifo-depth property in dtsi. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6sx: Fix sdma nodeFabio Estevam1-1/+3
Use the correct compatible string for sdma and also provide the sdma firmware path. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add can busSilvio Fricke1-0/+13
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add two other i2c busesSilvio Fricke1-0/+28
Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx6: edmqmx6: Add PCIe supportSilvio Fricke1-0/+13
Add support for the PCI express bus available on MX6 Data Modul edm-qmx6 board. Signed-off-by: Silvio Fricke <silvio.fricke@gmail.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: imx25-pdk: Add USB OTG supportFabio Estevam1-0/+7
Tested by loading the g_ether module and doing a ping between mx25pdk and the host PC via USB. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: i.MX53: add aipstz nodesSteffen Trumtrar1-0/+10
The AHB to IP bridges (AIPSTZ) allow fine grained access rights management. Add both bridges to the DT. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: mxs: Split M28EVK into SoM and EVK partsMarek Vasut2-61/+88
This patch splits the M28EVK device tree file into a common SoM part and an EVK part. This is needed to make it easier for users of the SoM to put it into different, non-reference baseboard. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: i.MX25: Fix gpt timers clocks.Denis Carikli1-4/+4
Without that fix, the board freeze during boot. This appeared after the following commit: 496f065 ARM: i.MX: Use of_clk_get_by_name() for timer clocks for DT case. Signed-off-by: Denis Carikli <denis@eukrea.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: mx6: Disable the keypad in the dtsi filesFabio Estevam3-0/+3
When booting a board that does not have a keypad (such as imx6q-sabresd) the following error is seen on boot: imx-keypad 20b8000.kpp: OF: linux,keymap property not defined in /soc/aips-bus@02000000/kpp@020b8000 imx-keypad 20b8000.kpp: failed to build keymap imx-keypad: probe of 20b8000.kpp failed with error -2 Let's disable the keypad functionality in the dtsi files and let each board dts enable it when needed. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
2014-07-18ARM: dts: cubox-i: disable spread-spectrum for Cubox-i eSATARussell King1-0/+1
Spread-spectrum doesn't work with Cubox-i hardware. eSATA devices are detected, but then fail on normal IO. Therefore, disable this feature. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-24 19:07:55 +0300