summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-22Bluetooth: Collect kcov coverage from hci_rx_workTamas Koczka1-1/+9
Annotate hci_rx_work() with kcov_remote_start() and kcov_remote_stop() calls, so remote KCOV coverage is collected while processing the rx_q queue which is the main incoming Bluetooth packet queue. Coverage is associated with the thread which created the packet skb. The collected extra coverage helps kernel fuzzing efforts in finding vulnerabilities. This change only has effect if the kernel is compiled with CONFIG_KCOV, otherwise kcov_ functions don't do anything. Signed-off-by: Tamas Koczka <poprdi@google.com> Tested-by: Aleksandr Nogikh <nogikh@google.com> Reviewed-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: hci_sync: Fix resuming scan after suspend resumeZhengping Jiang1-3/+2
After resuming, remove setting scanning_paused to false, because it is checked and set to false in hci_resume_scan_sync. Also move setting the value to false before updating passive scan, because the value is used when resuming passive scan. Fixes: 3b42055388c30 (Bluetooth: hci_sync: Fix attempting to suspend with unfiltered passive scan) Signed-off-by: Zhengping Jiang <jiangzp@google.com> Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: btmtksdio: Add in-band wakeup supportSean Wang1-0/+15
Commit ce64b3e94919 ("Bluetooth: mt7921s: Support wake on bluetooth") adds the wake on bluethooth via a dedicated GPIO. Extend the wake-on-bluetooth to use the SDIO DAT1 pin (in-band wakeup), when supported by the SDIO host driver. Co-developed-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Yake Yang <yake.yang@mediatek.com> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: mgmt: Fix refresh cached connection infoZhengping Jiang1-5/+5
Set the connection data before calling get_conn_info_sync, so it can be verified the connection is still connected, before refreshing cached values. Fixes: 47db6b42991e6 ("Bluetooth: hci_sync: Convert MGMT_OP_GET_CONN_INFO") Signed-off-by: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: HCI: Fix not always setting Scan Response/Advertising DataLuiz Augusto von Dentz3-43/+76
The scan response and advertising data needs to be tracked on a per instance (adv_info) since when these instaces are removed so are their data, to fix that new flags are introduced which is used to mark when the data changes and then checked to confirm when the data needs to be synced with the controller. Tested-by: Tedd Ho-Jeong An <tedd.an@intel.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: eir: Fix using strlen with hdev->{dev_name,short_name}Luiz Augusto von Dentz2-17/+28
Both dev_name and short_name are not guaranteed to be NULL terminated so this instead use strnlen and then attempt to determine if the resulting string needs to be truncated or not. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216018 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2022-07-22Bluetooth: use memset avoid memory leaksXiaohui Zhang1-0/+1
Similar to the handling of l2cap_ecred_connect in commit d3715b2333e9 ("Bluetooth: use memset avoid memory leaks"), we thought a patch might be needed here as well. Use memset to initialize structs to prevent memory leaks in l2cap_le_connect Signed-off-by: Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: fix an error code in hci_register_dev()Dan Carpenter1-1/+2
Preserve the error code from hci_register_suspend_notifier(). Don't return success. Fixes: d6bb2a91f95b ("Bluetooth: Unregister suspend with userchannel") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_bcm: Add BCM4349B1 variantAhmad Fatoum2-0/+3
The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Two subversions are added for the chip, because ROM firmware reports 002.002.013 (at least for the chips I have here), while depending on patchram firmware revision, either 002.002.013 or 002.002.014 is reported. Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22dt-bindings: bluetooth: broadcom: Add BCM4349B1 DT bindingAhmad Fatoum1-0/+1
The BCM4349B1, aka CYW/BCM89359, is a WiFi+BT chip and its Bluetooth portion can be controlled over serial. Extend the binding with its DT compatible. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: Unregister suspend with userchannelAbhishek Pandit-Subedi3-8/+30
When HCI_USERCHANNEL is used, unregister the suspend notifier when binding and register when releasing. The userchannel socket should be left alone after open is completed. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: Fix index added after unregisterAbhishek Pandit-Subedi1-1/+7
When a userchannel socket is released, we should check whether the hdev is already unregistered before sending out an IndexAdded. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: When HCI work queue is drained, only queue chained workSchspa Shi3-3/+13
The HCI command, event, and data packet processing workqueue is drained to avoid deadlock in commit 76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state"). There is another delayed work, which will queue command to this drained workqueue. Which results in the following error report: Bluetooth: hci2: command 0x040f tx timeout WARNING: CPU: 1 PID: 18374 at kernel/workqueue.c:1438 __queue_work+0xdad/0x1140 Workqueue: events hci_cmd_timeout RIP: 0010:__queue_work+0xdad/0x1140 RSP: 0000:ffffc90002cffc60 EFLAGS: 00010093 RAX: 0000000000000000 RBX: ffff8880b9d3ec00 RCX: 0000000000000000 RDX: ffff888024ba0000 RSI: ffffffff814e048d RDI: ffff8880b9d3ec08 RBP: 0000000000000008 R08: 0000000000000000 R09: 00000000b9d39700 R10: ffffffff814f73c6 R11: 0000000000000000 R12: ffff88807cce4c60 R13: 0000000000000000 R14: ffff8880796d8800 R15: ffff8880796d8800 FS: 0000000000000000(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c0174b4000 CR3: 000000007cae9000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? queue_work_on+0xcb/0x110 ? lockdep_hardirqs_off+0x90/0xd0 queue_work_on+0xee/0x110 process_one_work+0x996/0x1610 ? pwq_dec_nr_in_flight+0x2a0/0x2a0 ? rwlock_bug.part.0+0x90/0x90 ? _raw_spin_lock_irq+0x41/0x50 worker_thread+0x665/0x1080 ? process_one_work+0x1610/0x1610 kthread+0x2e9/0x3a0 ? kthread_complete_and_exit+0x40/0x40 ret_from_fork+0x1f/0x30 </TASK> To fix this, we can add a new HCI_DRAIN_WQ flag, and don't queue the timeout workqueue while command workqueue is draining. Fixes: 76727c02c1e1 ("Bluetooth: Call drain_workqueue() before resetting state") Reported-by: syzbot+63bed493aebbf6872647@syzkaller.appspotmail.com Signed-off-by: Schspa Shi <schspa@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_intel: Add check for platform_driver_registerJiasheng Jiang1-1/+5
As platform_driver_register() could fail, it should be better to deal with the return value in order to maintain the code consisitency. Fixes: 1ab1f239bf17 ("Bluetooth: hci_intel: Add support for platform driver") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: clear the temporary linkkey in hci_conn_cleanupAlain Michaud2-2/+5
If a hardware error occurs and the connections are flushed without a disconnection_complete event being signaled, the temporary linkkeys are not flushed. This change ensures that any outstanding flushable linkkeys are flushed when the connection are flushed from the hash table. Additionally, this also makes use of test_and_clear_bit to avoid multiple attempts to delete the link key that's already been flushed. Signed-off-by: Alain Michaud <alainm@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_bcm: Add support for FW loading in autobaud modeHakan Jansson3-15/+40
Use the presence of a DT property, "brcm,requires-autobaud-mode", to enable startup in autobaud mode. If the property is present, the device is started in autobaud mode by asserting RTS (BT_UART_CTS_N) prior to powering on the device. Also prevent the use of unsupported commands for devices started in autobaud mode. Only a limited subset of HCI commands are supported in autobaud mode. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate in normal mode when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22dt-bindings: net: broadcom-bluetooth: Add property for autobaud modeHakan Jansson1-0/+7
Add property, "brcm,requires-autobaud-mode", to enable autobaud mode selection. Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. Autobaud mode can also be required on some boards where the controller device is using a non-standard baud rate when first powered on. Signed-off-by: Hakan Jansson <hakan.jansson@infineon.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: hci_qca: Return wakeup for qca_wakeupSai Teja Aluvala1-1/+1
This fixes the return value of qca_wakeup(), since .wakeup work inversely with original .prevent_wake. Fixes: 4539ca67fe8ed (Bluetooth: Rename driver .prevent_wake to .wakeup) Signed-off-by: Sai Teja Aluvala <quic_saluvala@quicinc.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22Bluetooth: btusb: Add support of IMC Networks PID 0x3568Aaron Ma1-0/+3
It is 13d3:3568 for MediaTek MT7922 USB Bluetooth chip. T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=13d3 ProdID=3568 Rev=01.00 S: Manufacturer=MediaTek Inc. S: Product=Wireless_Device S: SerialNumber=... C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=125us E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 2 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=(none) E: Ad=0a(O) Atr=03(Int.) MxPS= 64 Ivl=125us E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=125us Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2022-07-22net: ipa: fix buildPaolo Abeni6-24/+24
After commit 2c7b9b936bdc ("net: ipa: move configuration data files into a subdirectory"), build of the ipa driver fails with the following error: drivers/net/ipa/data/ipa_data-v3.1.c:9:10: fatal error: gsi.h: No such file or directory After the mentioned commit, all the file included by the configuration are in the parent directory. Fix the issue updating the include path. Fixes: 2c7b9b936bdc ("net: ipa: move configuration data files into a subdirectory") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/7105112c38cfe0642a2d9e1779bf784a7aa63d16.1658411666.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22bpf, docs: Use SPDX license identifier in bpf_doc.pyAlejandro Colomar1-21/+1
The Linux man-pages project now uses SPDX tags, instead of the full license text. Signed-off-by: Alejandro Colomar <alx.manpages@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://www.kernel.org/doc/man-pages/licenses.html Link: https://spdx.org/licenses/Linux-man-pages-copyleft.html Link: https://lore.kernel.org/bpf/20220721110821.8240-1-alx.manpages@gmail.com
2022-07-22bpf, arm64: Fix compile error in dummy_tramp()Xu Kuohai1-2/+2
dummy_tramp() uses "lr" to refer to the x30 register, but some assembler does not recognize "lr" and reports a build failure: /tmp/cc52xO0c.s: Assembler messages: /tmp/cc52xO0c.s:8: Error: operand 1 should be an integer register -- `mov lr,x9' /tmp/cc52xO0c.s:7: Error: undefined symbol lr used as an immediate value make[2]: *** [scripts/Makefile.build:250: arch/arm64/net/bpf_jit_comp.o] Error 1 make[1]: *** [scripts/Makefile.build:525: arch/arm64/net] Error 2 So replace "lr" with "x30" to fix it. Fixes: b2ad54e1533e ("bpf, arm64: Implement bpf_arch_text_poke() for arm64") Reported-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Xu Kuohai <xukuohai@huawei.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Link: https://lore.kernel.org/bpf/20220721121319.2999259-1-xukuohai@huaweicloud.com
2022-07-21ice: add write functionality for GNSS TTYKarol Kolacinski4-31/+254
Add the possibility to write raw bytes to the GNSS module through the first TTY device. This allows user to configure the module. Create a second read-only TTY device. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski267-1713/+2621
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21riscv: add as-options for modules with assembly compontentsBen Dooks1-0/+1
When trying to load modules built for RISC-V which include assembly files the kernel loader errors with "unexpected relocation type 'R_RISCV_ALIGN'" due to R_RISCV_ALIGN relocations being generated by the assembler. The R_RISCV_ALIGN relocations can be removed at the expense of code space by adding -mno-relax to gcc and as. In commit 7a8e7da42250138 ("RISC-V: Fixes to module loading") -mno-relax is added to the build variable KBUILD_CFLAGS_MODULE. See [1] for more info. The issue is that when kbuild builds a .S file, it invokes gcc with the -mno-relax flag, but this is not being passed through to the assembler. Adding -Wa,-mno-relax to KBUILD_AFLAGS_MODULE ensures that the assembler is invoked correctly. This may have now been fixed in gcc[2] and this addition should not stop newer gcc and as from working. [1] https://github.com/riscv/riscv-elf-psabi-doc/issues/183 [2] https://github.com/gcc-mirror/gcc/commit/3b0a7d624e64eeb81e4d5e8c62c46d86ef521857 Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Link: https://lore.kernel.org/r/20220529152200.609809-1-ben.dooks@codethink.co.uk Fixes: ab1ef68e5401 ("RISC-V: Add sections of PLT and GOT for kernel module") Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2022-07-21Merge tag 'mtd/fixes-for-5.19-final' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD fix from Richard Weinberger: "A aingle NAND controller fix: - gpmi: Fix busy timeout setting (wrong calculation, yes again)" * tag 'mtd/fixes-for-5.19-final' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times
2022-07-21ice: add i2c write commandKarol Kolacinski3-4/+54
Add the possibility to write to connected i2c devices using the AQ command. FW may reject the write if the device is not on allowlist. Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-21Merge tag 'net-5.19-rc8' of ↵Linus Torvalds93-592/+1117
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can. Still no major regressions, most of the changes are still due to data races fixes, plus the usual bunch of drivers fixes. Previous releases - regressions: - tcp/udp: make early_demux back namespacified. - dsa: fix issues with vlan_filtering_is_global Previous releases - always broken: - ip: fix data-races around ipv4_net_table (round 2, 3 & 4) - amt: fix validation and synchronization bugs - can: fix detection of mcp251863 - eth: iavf: fix handling of dummy receive descriptors - eth: lan966x: fix issues with MAC table - eth: stmmac: dwmac-mediatek: fix clock issue Misc: - dsa: update documentation" * tag 'net-5.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (107 commits) mlxsw: spectrum_router: Fix IPv4 nexthop gateway indication net/sched: cls_api: Fix flow action initialization tcp: Fix data-races around sysctl_tcp_max_reordering. tcp: Fix a data-race around sysctl_tcp_abort_on_overflow. tcp: Fix a data-race around sysctl_tcp_rfc1337. tcp: Fix a data-race around sysctl_tcp_stdurg. tcp: Fix a data-race around sysctl_tcp_retrans_collapse. tcp: Fix data-races around sysctl_tcp_slow_start_after_idle. tcp: Fix a data-race around sysctl_tcp_thin_linear_timeouts. tcp: Fix data-races around sysctl_tcp_recovery. tcp: Fix a data-race around sysctl_tcp_early_retrans. tcp: Fix data-races around sysctl knobs related to SYN option. udp: Fix a data-race around sysctl_udp_l3mdev_accept. ip: Fix data-races around sysctl_ip_prot_sock. ipv4: Fix data-races around sysctl_fib_multipath_hash_fields. ipv4: Fix data-races around sysctl_fib_multipath_hash_policy. ipv4: Fix a data-race around sysctl_fib_multipath_use_neigh. can: rcar_canfd: Add missing of_node_put() in rcar_canfd_probe() can: mcp251xfd: fix detection of mcp251863 Documentation: fix udp_wmem_min in ip-sysctl.rst ...
2022-07-21s390/archrandom: prevent CPACF trng invocations in interrupt contextHarald Freudenberger1-3/+6
This patch slightly reworks the s390 arch_get_random_seed_{int,long} implementation: Make sure the CPACF trng instruction is never called in any interrupt context. This is done by adding an additional condition in_task(). Justification: There are some constrains to satisfy for the invocation of the arch_get_random_seed_{int,long}() functions: - They should provide good random data during kernel initialization. - They should not be called in interrupt context as the TRNG instruction is relatively heavy weight and may for example make some network loads cause to timeout and buck. However, it was not clear what kind of interrupt context is exactly encountered during kernel init or network traffic eventually calling arch_get_random_seed_long(). After some days of investigations it is clear that the s390 start_kernel function is not running in any interrupt context and so the trng is called: Jul 11 18:33:39 t35lp54 kernel: [<00000001064e90ca>] arch_get_random_seed_long.part.0+0x32/0x70 Jul 11 18:33:39 t35lp54 kernel: [<000000010715f246>] random_init+0xf6/0x238 Jul 11 18:33:39 t35lp54 kernel: [<000000010712545c>] start_kernel+0x4a4/0x628 Jul 11 18:33:39 t35lp54 kernel: [<000000010590402a>] startup_continue+0x2a/0x40 The condition in_task() is true and the CPACF trng provides random data during kernel startup. The network traffic however, is more difficult. A typical call stack looks like this: Jul 06 17:37:07 t35lp54 kernel: [<000000008b5600fc>] extract_entropy.constprop.0+0x23c/0x240 Jul 06 17:37:07 t35lp54 kernel: [<000000008b560136>] crng_reseed+0x36/0xd8 Jul 06 17:37:07 t35lp54 kernel: [<000000008b5604b8>] crng_make_state+0x78/0x340 Jul 06 17:37:07 t35lp54 kernel: [<000000008b5607e0>] _get_random_bytes+0x60/0xf8 Jul 06 17:37:07 t35lp54 kernel: [<000000008b56108a>] get_random_u32+0xda/0x248 Jul 06 17:37:07 t35lp54 kernel: [<000000008aefe7a8>] kfence_guarded_alloc+0x48/0x4b8 Jul 06 17:37:07 t35lp54 kernel: [<000000008aeff35e>] __kfence_alloc+0x18e/0x1b8 Jul 06 17:37:07 t35lp54 kernel: [<000000008aef7f10>] __kmalloc_node_track_caller+0x368/0x4d8 Jul 06 17:37:07 t35lp54 kernel: [<000000008b611eac>] kmalloc_reserve+0x44/0xa0 Jul 06 17:37:07 t35lp54 kernel: [<000000008b611f98>] __alloc_skb+0x90/0x178 Jul 06 17:37:07 t35lp54 kernel: [<000000008b6120dc>] __napi_alloc_skb+0x5c/0x118 Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f06b4>] qeth_extract_skb+0x13c/0x680 Jul 06 17:37:07 t35lp54 kernel: [<000000008b8f6526>] qeth_poll+0x256/0x3f8 Jul 06 17:37:07 t35lp54 kernel: [<000000008b63d76e>] __napi_poll.constprop.0+0x46/0x2f8 Jul 06 17:37:07 t35lp54 kernel: [<000000008b63dbec>] net_rx_action+0x1cc/0x408 Jul 06 17:37:07 t35lp54 kernel: [<000000008b937302>] __do_softirq+0x132/0x6b0 Jul 06 17:37:07 t35lp54 kernel: [<000000008abf46ce>] __irq_exit_rcu+0x13e/0x170 Jul 06 17:37:07 t35lp54 kernel: [<000000008abf531a>] irq_exit_rcu+0x22/0x50 Jul 06 17:37:07 t35lp54 kernel: [<000000008b922506>] do_io_irq+0xe6/0x198 Jul 06 17:37:07 t35lp54 kernel: [<000000008b935826>] io_int_handler+0xd6/0x110 Jul 06 17:37:07 t35lp54 kernel: [<000000008b9358a6>] psw_idle_exit+0x0/0xa Jul 06 17:37:07 t35lp54 kernel: ([<000000008ab9c59a>] arch_cpu_idle+0x52/0xe0) Jul 06 17:37:07 t35lp54 kernel: [<000000008b933cfe>] default_idle_call+0x6e/0xd0 Jul 06 17:37:07 t35lp54 kernel: [<000000008ac59f4e>] do_idle+0xf6/0x1b0 Jul 06 17:37:07 t35lp54 kernel: [<000000008ac5a28e>] cpu_startup_entry+0x36/0x40 Jul 06 17:37:07 t35lp54 kernel: [<000000008abb0d90>] smp_start_secondary+0x148/0x158 Jul 06 17:37:07 t35lp54 kernel: [<000000008b935b9e>] restart_int_handler+0x6e/0x90 which confirms that the call is in softirq context. So in_task() covers exactly the cases where we want to have CPACF trng called: not in nmi, not in hard irq, not in soft irq but in normal task context and during kernel init. Signed-off-by: Harald Freudenberger <freude@linux.ibm.com> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Juergen Christ <jchrist@linux.ibm.com> Link: https://lore.kernel.org/r/20220713131721.257907-1-freude@linux.ibm.com Fixes: e4f74400308c ("s390/archrandom: simplify back to earlier design and initialize earlier") [agordeev@linux.ibm.com changed desc, added Fixes and Link, removed -stable] Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
2022-07-21mmu_gather: Force tlb-flush VM_PFNMAP vmasPeter Zijlstra1-16/+17
Jann reported a race between munmap() and unmap_mapping_range(), where unmap_mapping_range() will no-op once unmap_vmas() has unlinked the VMA; however munmap() will not yet have invalidated the TLBs. Therefore unmap_mapping_range() will complete while there are still (stale) TLB entries for the specified range. Mitigate this by force flushing TLBs for VM_PFNMAP ranges. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21mmu_gather: Let there be one tlb_{start,end}_vma() implementationPeter Zijlstra1-13/+2
Now that architectures are no longer allowed to override tlb_{start,end}_vma() re-arrange code so that there is only one implementation for each of these functions. This much simplifies trying to figure out what they actually do. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21csky/tlb: Remove tlb_flush() definePeter Zijlstra1-2/+0
The previous patch removed the tlb_flush_end() implementation which used tlb_flush_range(). This means: - csky did double invalidates, a range invalidate per vma and a full invalidate at the end - csky actually has range invalidates and as such the generic tlb_flush implementation is more efficient for it. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Tested-by: Guo Ren <guoren@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21mmu_gather: Remove per arch tlb_{start,end}_vma()Peter Zijlstra13-35/+32
Scattered across the archs are 3 basic forms of tlb_{start,end}_vma(). Provide two new MMU_GATHER_knobs to enumerate them and remove the per arch tlb_{start,end}_vma() implementations. - MMU_GATHER_NO_FLUSH_CACHE indicates the arch has flush_cache_range() but does *NOT* want to call it for each VMA. - MMU_GATHER_MERGE_VMAS indicates the arch wants to merge the invalidate across multiple VMAs if possible. With these it is possible to capture the three forms: 1) empty stubs; select MMU_GATHER_NO_FLUSH_CACHE and MMU_GATHER_MERGE_VMAS 2) start: flush_cache_range(), end: empty; select MMU_GATHER_MERGE_VMAS 3) start: flush_cache_range(), end: flush_tlb_range(); default Obviously, if the architecture does not have flush_cache_range() then it also doesn't need to select MMU_GATHER_NO_FLUSH_CACHE. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Will Deacon <will@kernel.org> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21scripts/gdb: Fix gdb 'lx-symbols' commandKhalid Masum1-1/+1
Currently the command 'lx-symbols' in gdb exits with the error`Function "do_init_module" not defined in "kernel/module.c"`. This occurs because the file kernel/module.c was moved to kernel/module/main.c. Fix this breakage by changing the path to "kernel/module/main.c" in LoadModuleBreakpoint. Signed-off-by: Khalid Masum <khalid.masum.92@gmail.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Fixes: cfc1d277891e ("module: Move all into module/") Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-07-21watch-queue: remove spurious double semicolonLinus Torvalds1-1/+1
Sedat Dilek noticed that I had an extraneous semicolon at the end of a line in the previous patch. It's harmless, but unintentional, and while compilers just treat it as an extra empty statement, for all I know some other tooling might warn about it. So clean it up before other people notice too ;) Fixes: 353f7988dd84 ("watchqueue: make sure to serialize 'wqueue->defunct' properly") Reported-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
2022-07-21spi: spi-rspi: Fix PIO fallback on RZ platformsBiju Das1-0/+4
RSPI IP on RZ/{A, G2L} SoC's has the same signal for both interrupt and DMA transfer request. Setting DMARS register for DMA transfer makes the signal to work as a DMA transfer request signal and subsequent interrupt requests to the interrupt controller are masked. PIO fallback does not work as interrupt signal is disabled. This patch fixes this issue by re-enabling the interrupts by calling dmaengine_synchronize(). Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20220721143449.879257-1-biju.das.jz@bp.renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-07-21can: pch_can: pch_can_error(): initialize errc before using itVincent Mailhol1-1/+1
After commit 3a5c7e4611dd, the variable errc is accessed before being initialized, c.f. below W=2 warning: | In function 'pch_can_error', | inlined from 'pch_can_poll' at drivers/net/can/pch_can.c:739:4: | drivers/net/can/pch_can.c:501:29: warning: 'errc' may be used uninitialized [-Wmaybe-uninitialized] | 501 | cf->data[6] = errc & PCH_TEC; | | ^ | drivers/net/can/pch_can.c: In function 'pch_can_poll': | drivers/net/can/pch_can.c:484:13: note: 'errc' was declared here | 484 | u32 errc, lec; | | ^~~~ Moving errc initialization up solves this issue. Fixes: 3a5c7e4611dd ("can: pch_can: do not report txerr and rxerr during bus-off") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/all/20220721160032.9348-1-mailhol.vincent@wanadoo.fr Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-21io_uring: do not recycle buffer in READVDylan Yudaken1-0/+8
READV cannot recycle buffers as it would lose some of the data required to reimport that buffer. Reported-by: Ammar Faizi <ammarfaizi2@gnuweeb.org> Fixes: b66e65f41426 ("io_uring: never call io_buffer_select() for a buffer re-select") Signed-off-by: Dylan Yudaken <dylany@fb.com> Link: https://lore.kernel.org/r/20220721131325.624788-1-dylany@fb.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21io_uring: fix free of unallocated buffer listDylan Yudaken1-3/+3
in the error path of io_register_pbuf_ring, only free bl if it was allocated. Reported-by: Dipanjan Das <mail.dipanjan.das@gmail.com> Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Dylan Yudaken <dylany@fb.com> Reviewed-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/all/CANX2M5bXKw1NaHdHNVqssUUaBCs8aBpmzRNVEYEvV0n44P7ioA@mail.gmail.com/ Link: https://lore.kernel.org/all/CANX2M5YiZBXU3L6iwnaLs-HHJXRvrxM8mhPDiMDF9Y9sAvOHUA@mail.gmail.com/ Signed-off-by: Jens Axboe <axboe@kernel.dk>
2022-07-21bpf: Check attach_func_proto more carefully in check_helper_callStanislav Fomichev1-1/+3
Syzkaller found a problem similar to d1a6edecc1fd ("bpf: Check attach_func_proto more carefully in check_return_code") where attach_func_proto might be NULL: RIP: 0010:check_helper_call+0x3dcb/0x8d50 kernel/bpf/verifier.c:7330 do_check kernel/bpf/verifier.c:12302 [inline] do_check_common+0x6e1e/0xb980 kernel/bpf/verifier.c:14610 do_check_main kernel/bpf/verifier.c:14673 [inline] bpf_check+0x661e/0xc520 kernel/bpf/verifier.c:15243 bpf_prog_load+0x11ae/0x1f80 kernel/bpf/syscall.c:2620 With the following reproducer: bpf$BPF_PROG_RAW_TRACEPOINT_LOAD(0x5, &(0x7f0000000780)={0xf, 0x4, &(0x7f0000000040)=@framed={{}, [@call={0x85, 0x0, 0x0, 0xbb}]}, &(0x7f0000000000)='GPL\x00', 0x0, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, 0x2b, 0xffffffffffffffff, 0x8, 0x0, 0x0, 0x10, 0x0}, 0x80) Let's do the same here, only check attach_func_proto for the prog types where we are certain that attach_func_proto is defined. Fixes: 69fd337a975c ("bpf: per-cgroup lsm flavor") Reported-by: syzbot+0f8d989b1fba1addc5e0@syzkaller.appspotmail.com Signed-off-by: Stanislav Fomichev <sdf@google.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20220720164729.147544-1-sdf@google.com
2022-07-21Merge tag 'at91-fixes-5.19-3' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/fixes AT91 fixes for 5.19 #3 It contains one fix for LAN966 based SoCs fixing the frequency of sys_clk. sys_clk is feeding different IPs so having proper frequency for it in DT is necessary for proper working of different drivers. * tag 'at91-fixes-5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: lan966x: fix sys_clk frequency Link: https://lore.kernel.org/r/20220721075705.1739915-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2022-07-21libbpf: Fix str_has_sfx()'s return valueDan Carpenter1-3/+3
The return from strcmp() is inverted so it wrongly returns true instead of false and vice versa. Fixes: a1c9d61b19cb ("libbpf: Improve library identification for uprobe binary path resolution") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Cc: Alan Maguire <alan.maguire@oracle.com> Link: https://lore.kernel.org/bpf/YtZ+/dAA195d99ak@kili
2022-07-21libbpf: Fix sign expansion bug in btf_dump_get_enum_value()Dan Carpenter1-1/+1
The code here is supposed to take a signed int and store it in a signed long long. Unfortunately, the way that the type promotion works with this conditional statement is that it takes a signed int, type promotes it to a __u32, and then stores that as a signed long long. The result is never negative. This is from static analysis, but I made a little test program just to test it before I sent the patch: #include <stdio.h> int main(void) { unsigned long long src = -1ULL; signed long long dst1, dst2; int is_signed = 1; dst1 = is_signed ? *(int *)&src : *(unsigned int *)0; dst2 = is_signed ? (signed long long)*(int *)&src : *(unsigned int *)0; printf("%lld\n", dst1); printf("%lld\n", dst2); return 0; } Fixes: d90ec262b35b ("libbpf: Add enum64 support for btf_dump") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/YtZ+LpgPADm7BeEd@kili
2022-07-21net/cdc_ncm: Increase NTB max RX/TX values to 64kbŁukasz Spintzyk1-2/+2
DisplayLink ethernet devices require NTB buffers larger then 32kb in order to run with highest performance. This patch is changing upper limit of the rx and tx buffers. Those buffers are initialized with CDC_NCM_NTB_DEF_SIZE_RX and CDC_NCM_NTB_DEF_SIZE_TX which is 16kb so by default no device is affected by increased limit. Rx and tx buffer is increased under two conditions: - Device need to advertise that it supports higher buffer size in dwNtbMaxInMaxSize and dwNtbMaxOutMaxSize. - cdc_ncm/rx_max and cdc_ncm/tx_max driver parameters must be adjusted with udev rule or ethtool. Summary of testing and performance results: Tests were performed on following devices: - DisplayLink DL-3xxx family device - DisplayLink DL-6xxx family device - ASUS USB-C2500 2.5G USB3 ethernet adapter - Plugable USB3 1G USB3 ethernet adapter - EDIMAX EU-4307 USB-C ethernet adapter - Dell DBQBCBC064 USB-C ethernet adapter Performance measurements were done with: - iperf3 between two linux boxes - http://openspeedtest.com/ instance running on local test machine Insights from tests results: - All except one from third party usb adapters were not affected by increased buffer size to their advertised dwNtbOutMaxSize and dwNtbInMaxSize. Devices were generally reaching 912-940Mbps both download and upload. Only EDIMAX adapter experienced decreased download size from 929Mbps to 827Mbps with iper3, with openspeedtest decrease was from 968Mbps to 886Mbps. - DisplayLink DL-3xxx family devices experienced performance increase with iperf3 download from 300Mbps to 870Mbps and upload from 782Mbps to 844Mbps. With openspeedtest download increased from 556Mbps to 873Mbps and upload from 727Mbps to 973Mbps - DiplayLink DL-6xxx family devices are not affected by increased buffer size. Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220720060518.541-2-lukasz.spintzyk@synaptics.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-21net/cdc_ncm: Enable ZLP for DisplayLink ethernet devicesDominik Czerwik1-1/+24
This improves performance and stability of DL-3xxx/DL-5xxx/DL-6xxx device series. Specifically prevents device from temporary network dropouts when playing video from the web and network traffic going through is high. Signed-off-by: Dominik Czerwik <dominik.czerwik@synaptics.com> Signed-off-by: Łukasz Spintzyk <lukasz.spintzyk@synaptics.com> Link: https://lore.kernel.org/r/20220720060518.541-1-lukasz.spintzyk@synaptics.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-07-21sched/deadline: Fix BUG_ON condition for deboosted tasksJuri Lelli1-1/+4
Tasks the are being deboosted from SCHED_DEADLINE might enter enqueue_task_dl() one last time and hit an erroneous BUG_ON condition: since they are not boosted anymore, the if (is_dl_boosted()) branch is not taken, but the else if (!dl_prio) is and inside this one we BUG_ON(!is_dl_boosted), which is of course false (BUG_ON triggered) otherwise we had entered the if branch above. Long story short, the current condition doesn't make sense and always leads to triggering of a BUG. Fix this by only checking enqueue flags, properly: ENQUEUE_REPLENISH has to be present, but additional flags are not a problem. Fixes: 64be6f1f5f71 ("sched/deadline: Don't replenish from a !SCHED_DEADLINE entity") Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20220714151908.533052-1-juri.lelli@redhat.com
2022-07-21Merge branch 'net-ipa-move-configuration-data-files'Jakub Kicinski7-3/+7
Alex Elder says: ==================== net: ipa: move configuration data files This series moves the "ipa_data-vX.Y.c" files into a subdirectory. The first patch adds a Makefile variable containing the list of supported IPA versions, and uses it to simplify the way these files are specified. ==================== Link: https://lore.kernel.org/r/20220719150827.295248-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: move configuration data files into a subdirectoryAlex Elder7-1/+1
Reduce the clutter in the main IPA source directory by creating a new "data" subdirectory, and locating all of the configuration data files in there. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21net: ipa: list supported IPA versions in the MakefileAlex Elder1-3/+7
Create a variable in the Makefile listing the IPA versions supported by the driver. Use that to create the list of configuration data object files used (rather than listing them all individually). Add a SPDX license comment. Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-21Merge branch 'net-ipa-small-transaction-updates'Jakub Kicinski4-38/+66
Alex Elder says: ==================== net: ipa: small transaction updates Version 2 of this series corrects a misspelling of "outstanding" pointed out by the netdev test bots. (For some reason I don't see that when I run "checkpatch".) I found and fixed a second instance of that word being misspelled as well. This series includes three changes to the transaction code. The first adds a new transaction list that represents a distinct state that has not been maintained. The second moves a field in the transaction information structure, and reorders its initialization a bit. The third skips a function call when it is known not to be necessary. The last two are very small "leftover" patches. ==================== Link: https://lore.kernel.org/r/20220719181020.372697-1-elder@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 07:46:38 +0300