summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-10-13igb: avoid unnecessarily creating a local copy of the q_vectorAlexander Duyck1-29/+17
This is mostly a drop of unnecessary pointer defines for q_vector when we don't have issues with line width and don't have multiple references to the pointer. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-13ixgbe: Correct check for change in FCoE priorityMark Rustad1-2/+10
Correct a check for change in FCoE priority when IEEE mode DCB is in use. In IEEE mode a different function has to be used to get the FCoE priority mask. Also, the check for the mask assumed that only one priority was set. In case there should be more than one, check just the bit. These changes help avoid link flapping issues that can come up when IEEE DCB is in use. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-13ixgbe: Add FCoE DDP allocation failure counters to ethtool stats.Amir Hanania5-11/+56
Add 2 new counters to ethtool: 1. Count DDP allocation failure since we max the number of buffers allowed in one DDP context. 2. Count DDP allocation failure since we max the number of buffers allowed in one DDP context when we alloc an extra buffer. Signed-off-by: Amir Hanania <amir.hanania@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-13ixgbe: Add protection from VF invalid target DMAGreg Rose2-1/+175
It is possible for a VF to set an invalid target DMA address in its Tx/Rx descriptor buffer pointers. The workarounds in this patch will guard against such an event and issue a VFLR to the VF in response. The VFLR will shut down the VF until an administrator can take action to investigate the event and correct the problem. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-13net-netlink: Add a new attribute to expose TOS values via netlinkMurali Raja2-1/+7
This patch exposes the tos value for the TCP sockets when the TOS flag is requested in the ext_flags for the inet_diag request. This would mainly be used to expose TOS values for both for TCP and UDP sockets. Currently it is supported for TCP. When netlink support for UDP would be added the support to expose the TOS values would alse be done. For IPV4 tos value is exposed and for IPV6 tclass value is exposed. Signed-off-by: Murali Raja <muralira@google.com> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-13Smack: fix for /smack/access output, use string instead of byteJarkko Sakkinen1-2/+5
Small fix for the output of access SmackFS file. Use string is instead of byte. Makes it easier to extend API if it is needed. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
2011-10-13Smack: domain transition protections (v3)Jarkko Sakkinen1-11/+42
Protections for domain transition: - BPRM unsafe flags - Secureexec - Clear unsafe personality bits. - Clear parent death signal Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com>
2011-10-13Smack: Provide information for UDS getsockopt(SO_PEERCRED)Casey Schaufler1-0/+9
This patch is targeted for the smack-next tree. This patch takes advantage of the recent changes for performance and points the packet labels on UDS connect at the output label of the far side. This makes getsockopt(...SO_PEERCRED...) function properly. Without this change the getsockopt does not provide any information. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2011-10-13Smack: Clean up commentsCasey Schaufler3-12/+10
There are a number of comments in the Smack code that are either malformed or include code. This patch cleans them up. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2011-10-13Smack: Repair processing of fcntlCasey Schaufler1-25/+42
Al Viro pointed out that the processing of fcntl done by Smack appeared poorly designed. He was right. There are three things that required change. Most obviously, the list of commands that really imply writing is limited to those involving file locking and signal handling. The initialization if the file security blob was incomplete, requiring use of a heretofore unused LSM hook. Finally, the audit information coming from a helper masked the identity of the LSM hook. This patch corrects all three of these defects. This is targeted for the smack-next tree pending comments. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2011-10-13Smack: Rule list lookup performanceCasey Schaufler4-121/+220
This patch is targeted for the smack-next tree. Smack access checks suffer from two significant performance issues. In cases where there are large numbers of rules the search of the single list of rules is wasteful. Comparing the string values of the smack labels is less efficient than a numeric comparison would. These changes take advantage of the Smack label list, which maintains the mapping of Smack labels to secids and optional CIPSO labels. Because the labels are kept perpetually, an access check can be done strictly based on the address of the label in the list without ever looking at the label itself. Rather than keeping one global list of rules the rules with a particular subject label can be based off of that label list entry. The access check need never look at entries that do not use the current subject label. This requires that packets coming off the network with CIPSO direct Smack labels that have never been seen before be treated carefully. The only case where they could be delivered is where the receiving socket has an IPIN star label, so that case is explicitly addressed. On a system with 39,800 rules (200 labels in all permutations) a system with this patch runs an access speed test in 5% of the time of the old version. That should be a best case improvement. If all of the rules are associated with the same subject label and all of the accesses are for processes with that label (unlikely) the improvement is about 30%. Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
2011-10-13Smack: check permissions from user space (v2)Jarkko Sakkinen1-63/+117
Adds a new file into SmackFS called 'access'. Wanted Smack permission is written into /smack/access. After that result can be read from the opened file. If access applies result contains 1 and otherwise 0. File access is protected from race conditions by using simple_transaction_get()/set() API. Fixes from the previous version: - Removed smack.h changes, refactoring left-over from previous version. - Removed #include <linux/smack.h>, refactoring left-over from previous version. Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@intel.com> Signed-off-by: Casey Schaufler <cschaufler@cschaufler-intel.(none)>
2011-10-12sparc: Avoid calling sigprocmask()David S. Miller3-3/+3
Use set_current_blocked() instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-12sparc: Use set_current_blocked()Matt Fleming3-49/+30
As described in e6fa16ab ("signal: sigprocmask() should do retarget_shared_pending()") the modification of current->blocked is incorrect as we need to check whether the signal we're about to block is pending in the shared queue. Cc: Oleg Nesterov <oleg@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-12net: wireless: brcm80211: replace ndo_set_multicast_list with ndo_set_rx_modeStephen Rothwell1-1/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mwifiex: add support for Marvell pcie8766 chipsetAmitkumar Karwar18-37/+2284
This patch supports 88W8766P chipset with a PCIe interface. The corresponding firmware image file is located at: "mrvl/pcie8766_uapsta.bin" Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Ramesh Radhakrishnan <rramesh@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12IPVS netns shutdown/startup dead-lockHans Schillstrom3-51/+87
ip_vs_mutext is used by both netns shutdown code and startup and both implicit uses sk_lock-AF_INET mutex. cleanup CPU-1 startup CPU-2 ip_vs_dst_event() ip_vs_genl_set_cmd() sk_lock-AF_INET __ip_vs_mutex sk_lock-AF_INET __ip_vs_mutex * DEAD LOCK * A new mutex placed in ip_vs netns struct called sync_mutex is added. Comments from Julian and Simon added. This patch has been running for more than 3 month now and it seems to work. Ver. 3 IP_VS_SO_GET_DAEMON in do_ip_vs_get_ctl protected by sync_mutex instead of __ip_vs_mutex as sugested by Julian. Signed-off-by: Hans Schillstrom <hans@schillstrom.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2011-10-12nfs: fix bug about IPv6 address scope checkingMi Jinlong1-3/+4
The result from ipv6_addr_scope() is a set of flags, not a single value, so we can't just compare the result with IPV6_ADDR_SCOPE_LINKLOCAL. This patch fixs the problem, and checks for unequal addresses before scope_id. Signed-off-by: Mi Jinlong <mijinlong@cn.fujitsu.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2011-10-12TOMOYO: Fix quota and garbage collector.Tetsuo Handa2-0/+18
Commit 059d84db "TOMOYO: Add socket operation restriction support" and commit 731d37aa "TOMOYO: Allow domain transition without execve()." forgot to update tomoyo_domain_quota_is_ok() and tomoyo_del_acl() which results in incorrect quota counting and memory leak. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2011-10-12TOMOYO: Remove redundant tasklist_lock.Tetsuo Handa1-4/+0
rcu_read_lock() is sufficient for calling find_task_by_pid_ns()/find_task_by_vpid(). Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: James Morris <jmorris@namei.org>
2011-10-12cipso: remove an unneeded NULL check in cipso_v4_doi_add()Dan Carpenter1-1/+1
We dereference doi_def on the line before the NULL check. It has been this way since 2008. I checked all the callers and doi_def is always non-NULL here. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-12ath9k: only send FCS-fail packets to mac80211 if requestedFelix Fietkau1-1/+2
Prevents lots of broken frames from showing up on monitor interfaces by default. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k_hw: fix a regression in key miss handlingFelix Fietkau4-17/+19
The commit "ath9k_hw: Fix incorrect key_miss handling" changed the code to only report key miss errors if a MIC error wasn't reported. When checking the flags in that order in the MAC code, it might miss some real events, because the value of the MIC error flag is undefined under some conditions. The primary issue addressed by the previous commit is making sure that MIC errors are properly reported on the STA side. This can be fixed in a better way by adding a separate rx status flag for key miss and ignoring it for multicast frames. This fix slightly improves stability in AP mode on some older hardware, like AR9132. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k_hw: remove EEP_REG_1Felix Fietkau5-9/+0
It was previously used for current_rd_ext Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath: remove ath_regulatory::current_rd_extFelix Fietkau3-7/+0
It is unused since the previous dead code that was using it had been removed earlier. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k_hw: clean up tx power handlingFelix Fietkau13-176/+85
The code for handling various restrictions concerning regulatory limits, antenna gain, etc. is very convoluted and duplicated across various EEPROM parsing implementations, making it hard to review. This patch partially cleans up the mess by unifying regulatory limit handling in one function and simplifying handling of antenna gain. It also removes unused transmit power scaling arrays from the EEPROM code, which belonged to an unimplemented API that isn't supposed to be in the driver anyway. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k_hw: make ath9k_hw_set_interrupts use ah->imask by defaultFelix Fietkau6-17/+17
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: disable unnecessary PHY error reportingFelix Fietkau2-9/+1
PHY errors relevant for ANI are always tracked by hardware counters, the bits that allow them to pass through the rx filter are independent of that. Enabling PHY errors in the rx filter often creates lots of useless DMA traffic and might be responsible for some of the rx dma stop failure warnings. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Cc: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12b43: trivial: do not report any link quality instead of invalid oneRafał Miłecki1-5/+7
We don't want to report random quality info (new PHYs are affected). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12rtlwifi: Change debug parameter to apply to individual driversLarry Finger6-6/+25
The current debug parameter is applied to rtlwifi, which means that all loaded drivers have the same level of debugging applied. In addition, the previous method requires a two-step load process to enable debugging. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: dont orphan TX skbJohannes Berg1-5/+0
This was another workaround for truesize "bugs". The reason we did this was that when we orphaned the SKB it wouldn't be truesize-checked later. Now that the check is gone (and we just charge the former smaller size to the socket) there's no longer a reason to orphan the skb here. Keep the skb charged to the socket until it is really freed (or orphaned in TX status). This helps flow control and allows us to get at the socket later for other purposes. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: dont adjust truesizeJohannes Berg1-3/+0
There's no need to adjust truesize. The history of this was that we always ran into skb_truesize_bug (via skb_truesize_check) which has since been removed in commit 92a0acce186cd. skb_truesize_check() checked that truesize was bigger or equal to the actual allocation, which would trigger in mac80211 due to header adding. The check no longer exists and we shouldn't be messing with the truesize anwyay. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: parse radiotap header earlierJohannes Berg2-116/+89
We can now move the radiotap header parsing into ieee80211_monitor_start_xmit(). This moves it out of the hotpath, and also helps the code since now the radiotap header will no longer be present in ieee80211_xmit() etc. which is easier to understand. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: move fragment flag to info flag as dont-fragmentJohannes Berg4-27/+20
The purpose of this is two-fold: 1) by moving it out of tx_data.flags, we can in another patch move the radiotap parsing so it no longer is in the hotpath 2) if a device implements fragmentation but can optionally skip it, the radiotap request for not doing fragmentation may be honoured Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: remove tx_data ethertypeJohannes Berg2-7/+1
It's set, but never used, so kill it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: optimise monitor xmitJohannes Berg1-59/+49
Since the only way the interface can be a monitor interface in ieee80211_xmit() is because the frame came from ieee80211_monitor_start_xmit() we can move all the code there. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: Update injection documentationHelmut Schaa1-0/+4
Add documentation about NOACK tx flag usage. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: fix retry counting / BAR handling during queue flushFelix Fietkau2-2/+8
When tx is suspended temporarily and the queue is flushed, do not increase the retry count or attempt to send out BAR frames. Instead simply retry the affected subframes normally after the reset. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: improve PS filter clearing and retry counting for A-MPDUFelix Fietkau1-7/+6
Do not increment the retry counter if packets to a sleeping station were not sent because of tx failure, instead of only checking the filter flag. Clear the PS filter only after an A-MPDU was reported as filtered, otherwise the hardware might do some unnecessary extra retransmissions. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: keep track of what's triggering hardware resetsFelix Fietkau4-5/+47
Export how many times each of the reset triggers has fired through debugfs. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: indicate which queues are blocked when stopping tx failsFelix Fietkau1-3/+5
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: Fix regression that allowed mpaths between non-peers.Javier Cardona1-0/+9
Mesh paths should only exist over established peer links. Signed-off-by: Javier Cardona <javier@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mwifiex: fix smatch errorsYogesh Ashok Powar3-2/+7
drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: potential null derefence 'priv'. drivers/net/wireless/mwifiex/main.c +828 mwifiex_remove_card(52) error: we previously assumed 'priv' could be null (see line 820) drivers/net/wireless/mwifiex/txrx.c +90 mwifiex_process_tx(24) error: potential null derefence 'local_tx_pd'. drivers/net/wireless/mwifiex/sta_ioctl.c +766 mwifiex_rate_ioctl_set_rate_value(30) error: buffer overflow 'rate' 14 <= 14 Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath9k: remove some bogus error handling codeDan Carpenter1-7/+0
If "axq_qnum >= ARRAY_SIZE(sc->tx.txq)", then the call to ath9k_hw_releasetxqueue() would read beyond the end of the ah->txq[] array and possibly corrupt memory. Fortunately, ath9k_hw_setuptxqueue() doesn't return high values of "axq_qnum" and this code can be removed. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12ath5k: remove some unneeded error handling codeDan Carpenter1-6/+0
th5k_hw_setup_tx_queue() returns a valid offset into the ah->ah_txq[] array. The ah->ah_txq[] and the ah->txqs[] array are the same size. Both have AR5K_NUM_TX_QUEUES elements. So this error handling code will never trigger. Also it's wrong. The call to ath5k_hw_release_tx_queue() with a qnum of AR5K_NUM_TX_QUEUES or more will just trigger a WARN_ON() and return. Or if it missed the WARN_ON(), it would just corrupt some memory and return. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: fix offchannel TX cookie matchingJohannes Berg4-3/+4
When I introduced in-kernel off-channel TX I introduced a bug -- the work can't be canceled again because the code clear the skb pointer. Fix this by keeping track separately of whether TX status has already been reported. Cc: stable@kernel.org [2.6.38+] Reported-by: Jouni Malinen <j@w1.fi> Tested-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12iwlagn: separate init calib and rt calibWey-Yi Guy2-1/+11
My previous patch for init calib cfg disable a set of calibration for both init and runtime which cause performance issue, Fix it Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-12mac80211: pass no-CCK flag through to HW scanJohannes Berg1-0/+1
This is needed so that offloaded scan can do the right thing. Without this patch, the no_cck flag contains random values from the kernel heap. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-11Merge branch 'for-linville' of git://github.com/lucacoelho/wl12xxJohn W. Linville9-24/+158
2011-10-11net: wireless: add brcm80211 driversArend van Spriel81-3/+97056
Add the brcm80211 tree to drivers/net/wireless, and disable the version that's in drivers/staging. This version includes the sources currently in staging, plus any changes that have been sent out for review. Sources in staging will be deleted in a followup patch. Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 14:31:58 +0300