summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21pinctrl: remove ste u300 driverArnd Bergmann3-1118/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-6-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove coh901 driverArnd Bergmann5-798/+0
The ST-Ericsson U300 platform is getting removed, so this driver is no longer needed. Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-5-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove sirf atlas/prima driversArnd Bergmann10-9610/+0
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Barry Song <baohua@kernel.org> Link: https://lore.kernel.org/r/20210120132045.2127659-4-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-21pinctrl: remove zte zx driverArnd Bergmann8-1674/+0
The zte zx platform is getting removed, so this driver is no longer needed. Cc: Jun Nie <jun.nie@linaro.org> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120132045.2127659-3-arnd@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18dt-bindings: pinctrl: pinctrl-microchip-sgpio: Fix indentationJonathan Neuschäfer1-2/+2
yamllint warns: ./Documentation/devicetree/bindings/pinctrl/microchip,sparx5-sgpio.yaml 102:10 error wrong indentation: expected 10 but found 9 (indentation) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Link: https://lore.kernel.org/r/20210116015350.3501927-1-j.neuschaefer@gmx.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18pinctrl: bcm: Simplify bool comparisonJiapeng Zhong1-1/+1
Fix the follow coccicheck warnings: ./drivers/pinctrl/bcm/pinctrl-ns2-mux.c:856:29-38: WARNING: Comparison to bool. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Zhong <abaci-bugfix@linux.alibaba.com> Link: https://lore.kernel.org/r/1610705349-24310-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18pinctrl: ingenic: Only support SoCs enabled in configPaul Cercueil1-12/+48
Tested on a JZ4740 system (ARCH=mips make qi_lb60_defconfig), this saves about 14 KiB, by allowing the compiler to garbage-collect all the functions and tables that correspond to SoCs that were disabled in the config. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201213235447.138271-2-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18kconfig.h: Add IF_ENABLED() macroPaul Cercueil1-0/+6
IF_ENABLED(CONFIG_FOO, ptr) evaluates to (ptr) if CONFIG_FOO is set to 'y' or 'm', NULL otherwise. The (ptr) argument must be a pointer. The IF_ENABLED() macro can be very useful to help GCC drop dead code. For instance, consider the following: #ifdef CONFIG_FOO_SUSPEND static int foo_suspend(struct device *dev) { ... } #endif static struct pm_ops foo_ops = { #ifdef CONFIG_FOO_SUSPEND .suspend = foo_suspend, #endif }; While this works, the foo_suspend() macro is compiled conditionally, only when CONFIG_FOO_SUSPEND is set. This is problematic, as there could be a build bug in this function, we wouldn't have a way to know unless the config option is set. An alternative is to declare foo_suspend() always, but mark it as maybe unused: static int __maybe_unused foo_suspend(struct device *dev) { ... } static struct pm_ops foo_ops = { #ifdef CONFIG_FOO_SUSPEND .suspend = foo_suspend, #endif }; Again, this works, but the __maybe_unused attribute is required to instruct the compiler that the function may not be referenced anywhere, and is safe to remove without making a fuss about it. This makes the programmer responsible for tagging the functions that can be garbage-collected. With this patch, it is now possible to write the following: static int foo_suspend(struct device *dev) { ... } static struct pm_ops foo_ops = { .suspend = IF_ENABLED(CONFIG_FOO_SUSPEND, foo_suspend), }; The foo_suspend() function will now be automatically dropped by the compiler, and it does not require any specific attribute. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201213235447.138271-1-paul@crapouillou.net Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18Merge tag 'renesas-pinctrl-for-v5.12-tag1' of ↵Linus Walleij7-18/+4533
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: renesas: Updates for v5.12 - Restrict debug runtime-checks to Renesas platforms, - Initial support for the R-Car V3U SoC.
2021-01-18pinctrl: sprd: Simplify bool comparisonYANG LI1-1/+1
Fix the following coccicheck warning: ./drivers/pinctrl/sprd/pinctrl-sprd.c:690:8-23: WARNING: Comparison to bool Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: YANG LI <abaci-bugfix@linux.alibaba.com> Reviewed-by: Baolin Wang <baolin.wang7@gmail.com> Link: https://lore.kernel.org/r/1610440080-68600-1-git-send-email-abaci-bugfix@linux.alibaba.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-18pinctrl: ti :iodelay: Fixed inconsistent indentingSouptick Joarder1-3/+2
Kernel test robot throws below warning -> smatch warnings: drivers/pinctrl/ti/pinctrl-ti-iodelay.c:708 ti_iodelay_pinconf_group_dbg_show() warn: inconsistent indenting Fixed the inconsistent indenting. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Link: https://lore.kernel.org/r/1610394585-4296-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-14pinctrl: renesas: r8a779a0: Add TPU pins, groups and functionsUlrich Hecht1-0/+44
Add pins, groups and functions for the 16-Bit Timer Pulse Unit outputs on the R-Car R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-13-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add TMU pins, groups and functionsUlrich Hecht1-0/+65
This patch adds TMU TCLK1-4 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-12-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add QSPI pins, groups, and functionsUlrich Hecht1-0/+72
Add the QSPI0-1 pins, groups and functions to the R8A779A0 (V3U) PFC driver. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-11-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add PWM pins, groups and functionsUlrich Hecht1-0/+77
This patch adds PWM0-4 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-10-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add MSIOF pins, groups and functionsUlrich Hecht1-0/+362
This patch adds MSIOF0-5 pins, groups and functions to R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-9-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add MMC pins, groups and functionsUlrich Hecht1-0/+79
This patch adds MMC pins, groups and functions to R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165929.31002-8-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add INTC-EX pins, groups and functionUlrich Hecht1-0/+62
Add pins, groups, and function for the Interrupt Controller for External Devices (INTC-EX) on the R-Car R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-7-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add HSCIF pins, groups and functionsUlrich Hecht1-0/+134
This patch adds HSCIF0-3 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165929.31002-6-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add DU pins, groups and functionUlrich Hecht1-0/+54
This patch adds DU pins, groups and function for the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-5-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add CANFD pins, groups and functionsUlrich Hecht1-0/+137
This patch adds CANFD 0-7 and CANFD clock pinmux support for the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165929.31002-4-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add EtherAVB pins, groups and functionsUlrich Hecht1-0/+595
This patch adds groups and function for AVB PHY, LINK, MAGIC, RGMII and PTP pins for the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165929.31002-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add I2C pins, groups and functionsUlrich Hecht1-0/+107
This patch adds I2C0-6 pins, groups and functions to the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165929.31002-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: r8a779a0: Add SCIF pins, groups and functionsUlrich Hecht1-0/+156
This patch adds SCIF0, 1, 3 and 4 pins, groups and functions for the R8A779A0 (V3U) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-6-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Initial R8A779A0 (V3U) PFC supportUlrich Hecht5-0/+2529
This patch adds initial pinctrl support for the R8A779A0 (V3U) SoC, including bias, drive strength and voltage control. Based on patch by LUU HOAI <hoai.luu.ub@renesas.com>. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-5-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Add PORT_GP_CFG_{2,31} macrosUlrich Hecht1-4/+12
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-4-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Add I/O voltage level flagUlrich Hecht2-2/+23
This patch adds config macros describing the voltage levels available on a pin. The current default (3.3V/1.8V) maps to zero to avoid having to change existing PFC implementations. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-3-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14pinctrl: renesas: Implement unlock register masksUlrich Hecht2-11/+19
The V3U SoC has several unlock registers, one per register group. They reside at offset zero in each 0x200 bytes-sized block. To avoid adding yet another table to the PFC implementation, this patch adds the option to specify an address mask instead of the fixed address in sh_pfc_soc_info::unlock_reg. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210112165912.30876-2-uli+renesas@fpond.eu Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-14dt-bindings: pinctrl: renesas,pfc: Document r8a779a0 PFC supportUlrich Hecht1-1/+2
Document PFC support for the R-Car V3U (R8A779A0) SoC. Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu> Link: https://lore.kernel.org/r/20210112165912.30876-7-uli+renesas@fpond.eu [geert: increase reg maxItems to 10] Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-01-12pinctrl: renesas: checker: Restrict checks to Renesas platformsGeert Uytterhoeven1-0/+4
When DEBUG is defined (e.g. if CONFIG_DEBUG_PINCTRL=y), the Renesas pin control driver runs sanity checks against the pin control tables. This may cause lots of output on the console, and can be annoying in ARM multi-platform kernels. Fix this by only running the checks when running on SuperH, or on a DT platform supported by the Renesas pin controller driver. Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210111165013.496897-1-geert+renesas@glider.be
2021-01-06pinctrl: sunxi: h6-r: Add s_rsb pin functionsSamuel Holland1-0/+2
As there is an RSB controller in the H6 SoC, there should be some pin configuration for it. While no such configuration is documented, the "s_i2c" pins are suspiciously on the "alternate" function 3, with no primary function 2 given. This suggests the primary function for these pins is actually RSB, and that is indeed the case. Add the "s_rsb" pin functions so the RSB controller can be used. Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20210103100007.32867-3-samuel@sholland.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-05pinctrl: remove empty lines in pinctrl subsystemZhaoyu Liu13-13/+0
Remove all empty lines at the end of functions in pinctrl subsystem, and make the code neat. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Zhaoyu Liu <zackaryliu@yeah.net> Link: https://lore.kernel.org/r/X98NP6NFK1Afzrgd@manjaro Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: fix '-Wmissing-prototypes' in init functionSergio Paracuellos1-1/+1
Kernel test robot reported the following warning: 'warning: no previous prototype for 'rt2880_pinmux_init''. This function is the entry point for the platform driver and it is private to this driver. Hence declare it 'static' which is the correct thing to do fixing also this warning. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Link: https://lore.kernel.org/r/20201228064727.30098-1-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: use 'PTR_ERR_OR_ZERO'Sergio Paracuellos1-3/+1
Avoid some boilerplate code using 'PTR_ERR_OR_ZERO' in probe function. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-8-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: preserve error codesSergio Paracuellos1-4/+8
Some paths in probe function are returning '-EINVAL' instead of preserve original code from called functions. Change them to preserve all of them. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-7-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: delete not needed error messageSergio Paracuellos1-3/+1
When '-ENOMEM' is returned there is not need at all to add custom error messages. Hence delete it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-6-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: add missing NULL checkSergio Paracuellos1-0/+2
Memory is being requested to the kernel but there is a missing check for NULL. Hence, add it. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-5-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: return proper error codeSergio Paracuellos1-1/+1
Check for NULL shall return '-ENOMEM' instead of '-1'. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-4-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ralink: rt2880: avoid double pointer to simplify codeSergio Paracuellos1-12/+9
Double pointer is being used and assigned in a bit dirty way to assign functions in pinctrl. Instead of doing this just avoid it and use directly 'p->func' instead. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-3-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04dt-bindings: pinctrl: rt2880: properly redo bindingsSergio Paracuellos1-34/+28
When this bindings where applied there weren't already reviewed and some old hacks was being used to properly pass the schemas checks. This commits fix them up: - Instead of using 'if-then' clause use '-pins$'. - 'groups' and 'function' are included inside a new '^(.*-)?pinmux$' node. - compatible string is not an 'enum' but a 'const'. - 'pinctrl-0' and 'pinctrl-names' removed since they are used in consumer nodes. Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com> Reviewed-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20201213161721.6514-2-sergio.paracuellos@gmail.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: ti-iodelay: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084902.2480-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: moore: convert comma to semicolonZheng Yongjun1-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084801.2425-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: mediatek: paris: convert comma to semicolonZheng Yongjun1-2/+2
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084717.2371-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-01-04pinctrl: at91: convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084541.2318-1-zhengyongjun3@huawei.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-12-28Linux 5.11-rc1Linus Torvalds1-2/+2
2020-12-27proc mountinfo: make splice available againLinus Torvalds1-3/+6
Since commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") we've required that file operation structures explicitly enable splice support, rather than falling back to the default handlers. Most /proc files use the indirect 'struct proc_ops' to describe their file operations, and were fixed up to support splice earlier in commits 40be821d627c..b24c30c67863, but the mountinfo files interact with the VFS directly using their own 'struct file_operations' and got missed as a result. This adds the necessary support for splice to work for /proc/*/mountinfo and friends. Reported-by: Joan Bruguera Micó <joanbrugueram@gmail.com> Reported-by: Jussi Kivilinna <jussi.kivilinna@iki.fi> Link: https://bugzilla.kernel.org/show_bug.cgi?id=209971 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-27Merge tag 'ntb-5.11' of git://github.com/jonmason/ntbLinus Torvalds4-3/+44
Pull NTB fixes from Jon Mason: "Bug fix for IDT NTB and Intel NTB LTR management support" * tag 'ntb-5.11' of git://github.com/jonmason/ntb: ntb: intel: add Intel NTB LTR vendor support for gen4 NTB ntb: idt: fix error check in ntb_hw_idt.c
2020-12-27Merge branch 'linus' of ↵Linus Torvalds2-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: "Fix a number of autobuild failures due to missing Kconfig dependencies" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: qat - add CRYPTO_AES to Kconfig dependencies crypto: keembay - Add dependency on HAS_IOMEM crypto: keembay - CRYPTO_DEV_KEEMBAY_OCS_AES_SM4 should depend on ARCH_KEEMBAY
2020-12-27Merge tag 'objtool-urgent-2020-12-27' of ↵Linus Torvalds4-26/+42
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Ingo Molnar: "Fix a segfault that occurs when built with Clang" * tag 'objtool-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix seg fault with Clang non-section symbols
2020-12-27Merge tag 'locking-urgent-2020-12-27' of ↵Linus Torvalds3-4/+22
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: "Misc fixes/updates: - Fix static keys usage in module __init sections - Add separate MAINTAINERS entry for static branches/calls - Fix lockdep splat with CONFIG_PREEMPTIRQ_EVENTS=y tracing" * tag 'locking-urgent-2020-12-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: softirq: Avoid bad tracing / lockdep interaction jump_label/static_call: Add MAINTAINERS jump_label: Fix usage in module __init
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 14:29:29 +0300