summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-04-24drm/bridge: analogix_dp: Reset aux channel if an error occurredLin Huang1-4/+14
AUX errors are caused by many different reasons. We may not know what happened in aux channel on failure, so let's reset aux channel if some errors occurred. Cc: 征增 王 <wzz@rock-chips.com> Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-13-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Fix AUX_PD bit for Rockchipzain wang2-54/+65
There are some different bits between Rockchip and Exynos in register "AUX_PD". This patch fixes the incorrect operations about it. Cc: Douglas Anderson <dianders@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-12-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Check dpcd write/read statusLin Huang1-42/+127
We need to check the dpcd write/read return value to see whether the write/read was successful Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-11-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Fix incorrect usage of enhanced modezain wang1-4/+2
Enhanced mode is required by the eDP 1.2 specification, and not doing it early could result in a period of time where we have a link transmitting idle packets without it. Since there is no reason to disable it, we just enable it at the beginning of link training and then keep it on all the time. Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-10-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Extend hpd check time to 100msLin Huang1-1/+1
There was a 1ms delay to detect the hpd signal, which is too short to detect a short pulse. This patch extends this delay to 100ms. Cc: Stéphane Marchesin <marcheu@chromium.org> Cc: 征增 王 <wzz@rock-chips.com> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-9-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Ensure edp is disabled when shutting down the panelLin Huang1-0/+11
When panel is shut down, we should make sure edp can be disabled to avoid undefined behavior. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-8-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Set PD_INC_BG first when powering up edp phyzain wang2-2/+11
Following the correct power up sequence: dp_pd=ff => dp_pd=7f => wait 10us => dp_pd=00 Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-7-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Wait for HPD signal before configuring linkzain wang1-0/+11
According to DP spec v1.3 chap 3.5.1.2 Link Training, Link Policy Maker must first detect that the HPD signal is asserted high by the Downstream Device before establishing a link with it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-6-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Retry bridge enable when it failedzain wang3-17/+56
When we enable bridge failed, we have to retry it, otherwise we would get the abnormal display. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-5-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Don't use fast link training when panel just powered upzain wang2-5/+6
Panel would reset its setting when it powers down. It would forget the last succeeded link training setting. So we can't use the last successful link training setting to do fast link training. Let's reset fast_train_enable in analogix_dp_bridge_disable(); Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-4-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Check AUX_EN status when doing AUX transferLin Huang1-11/+14
We should check AUX_EN bit to confirm the AUX CH operation is completed. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-3-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Move enable video into config_video()Lin Huang1-6/+5
We need to enable video before analogix_dp_is_video_stream_on(), so we can get the right video stream status. We needed to increase the delay in the timeout loop because there is random "Timeout of video streamclk ok" message happen when debug edp panel, this time do not define in the spec. Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-2-enric.balletbo@collabora.com
2018-04-24powerpc/mce: Fix a bug where mce loops on memory UE.Mahesh Salgaonkar1-5/+2
The current code extracts the physical address for UE errors and then hooks it up into memory failure infrastructure. On successful extraction of physical address it wrongly sets "handled = 1" which means this UE error has been recovered. Since MCE handler gets return value as handled = 1, it assumes that error has been recovered and goes back to same NIP. This causes MCE interrupt again and again in a loop leading to hard lockup. Also, initialize phys_addr to ULONG_MAX so that we don't end up queuing undesired page to hwpoison. Without this patch we see: Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 ... Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 Severe Machine check interrupt [Recovered] NIP: [000000001002588c] PID: 7109 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffd2755940 Physical address: 000020181a080000 Memory failure: 0x20181a08: recovery action for dirty LRU page: Recovered Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned Memory failure: 0x20181a08: already hardware poisoned ... Watchdog CPU:38 Hard LOCKUP After this patch we see: Severe Machine check interrupt [Not recovered] NIP: [00007fffaae585f4] PID: 7168 Comm: find Initiator: CPU Error type: UE [Load/Store] Effective address: 00007fffaafe28ac Physical address: 00002017c0bd0000 find[7168]: unhandled signal 7 at 00007fffaae585f4 nip 00007fffaae585f4 lr 00007fffaae585e0 code 4 Memory failure: 0x2017c0bd: recovery action for dirty LRU page: Recovered Fixes: 01eaac2b0591 ("powerpc/mce: Hookup ierror (instruction) UE errors") Fixes: ba41e1e1ccb9 ("powerpc/mce: Hookup derror (load/store) UE errors") Cc: stable@vger.kernel.org # v4.15+ Signed-off-by: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24Merge branch 'amd-xgbe-fixes'David S. Miller7-23/+233
aTom Lendacky says: ==================== amd-xgbe: AMD XGBE driver fixes 2018-04-23 This patch series addresses some issues in the AMD XGBE driver. The following fixes are included in this driver update series: - Improve KR auto-negotiation and training (2 patches) - Add pre and post auto-negotiation hooks - Use the pre and post auto-negotiation hooks to disable CDR tracking during auto-negotiation page exchange in KR mode - Check for SFP tranceiver signal support and only use the signal if the SFP indicates that it is supported This patch series is based on net. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24amd-xgbe: Only use the SFP supported transceiver signalsTom Lendacky1-17/+54
The SFP eeprom indicates the transceiver signals (Rx LOS, Tx Fault, etc.) that it supports. Update the driver to include checking the eeprom data when deciding whether to use a transceiver signal. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24amd-xgbe: Improve KR auto-negotiation and trainingTom Lendacky7-4/+160
Update xgbe-phy-v2.c to make use of the auto-negotiation (AN) phy hooks to improve the ability to successfully complete Clause 73 AN when running at 10gbps. Hardware can sometimes have issues with CDR lock when the AN DME page exchange is being performed. The AN and KR training hooks are used as follows: - The pre AN hook is used to disable CDR tracking in the PHY so that the DME page exchange can be successfully and consistently completed. - The post KR training hook is used to re-enable the CDR tracking so that KR training can successfully complete. - The post AN hook is used to check for an unsuccessful AN which will increase a CDR tracking enablement delay (up to a maximum value). Add two debugfs entries to allow control over use of the CDR tracking workaround. The debugfs entries allow the CDR tracking workaround to be disabled and determine whether to re-enable CDR tracking before or after link training has been initiated. Also, with these changes the receiver reset cycle that is performed during the link status check can be performed less often. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24amd-xgbe: Add pre/post auto-negotiation phy hooksTom Lendacky2-2/+19
Add hooks to the driver auto-negotiation (AN) flow to allow the different phy implementations to perform any steps necessary to improve AN. Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24pppoe: check sockaddr length in pppoe_connect()Guillaume Nault1-0/+4
We must validate sockaddr_len, otherwise userspace can pass fewer data than we expect and we end up accessing invalid data. Fixes: 224cf5ad14c0 ("ppp: Move the PPP drivers") Reported-by: syzbot+4f03bdf92fdf9ef5ddab@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24l2tp: check sockaddr length in pppol2tp_connect()Guillaume Nault1-0/+7
Check sockaddr_len before dereferencing sp->sa_protocol, to ensure that it actually points to valid data. Fixes: fd558d186df2 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Reported-by: syzbot+a70ac890b23b1bf29f5c@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24net: phy: marvell: clear wol event before setting itJingju Hou1-0/+9
If WOL event happened once, the LED[2] interrupt pin will not be cleared unless we read the CSISR register. If interrupts are in use, the normal interrupt handling will clear the WOL event. Let's clear the WOL event before enabling it if !phy_interrupt_is_valid(). Signed-off-by: Jingju Hou <Jingju.Hou@synaptics.com> Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24powerpc/powernv/npu: Do a PID GPU TLB flush when invalidating a large ↵Alistair Popple1-4/+19
address range The NPU has a limited number of address translation shootdown (ATSD) registers and the GPU has limited bandwidth to process ATSDs. This can result in contention of ATSD registers leading to soft lockups on some threads, particularly when invalidating a large address range in pnv_npu2_mn_invalidate_range(). At some threshold it becomes more efficient to flush the entire GPU TLB for the given MM context (PID) than individually flushing each address in the range. This patch will result in ranges greater than 2MB being converted from 32+ ATSDs into a single ATSD which will flush the TLB for the given PID on each GPU. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alistair Popple <alistair@popple.id.au> Acked-by: Balbir Singh <bsingharora@gmail.com> Tested-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24powerpc/powernv/npu: Prevent overwriting of pnv_npu2_init_contex() callback ↵Alistair Popple2-4/+14
parameters There is a single npu context per set of callback parameters. Callers should be prevented from overwriting existing callback values so instead return an error if different parameters are passed. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alistair Popple <alistair@popple.id.au> Reviewed-by: Mark Hairgrove <mhairgrove@nvidia.com> Tested-by: Mark Hairgrove <mhairgrove@nvidia.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24powerpc/powernv/npu: Add lock to prevent race in concurrent context init/destroyAlistair Popple1-9/+42
The pnv_npu2_init_context() and pnv_npu2_destroy_context() functions are used to allocate/free contexts to allow address translation and shootdown by the NPU on a particular GPU. Context initialisation is implicitly safe as it is protected by the requirement mmap_sem be held in write mode, however pnv_npu2_destroy_context() does not require mmap_sem to be held and it is not safe to call with a concurrent initialisation for a different GPU. It was assumed the driver would ensure destruction was not called concurrently with initialisation. However the driver may be simplified by allowing concurrent initialisation and destruction for different GPUs. As npu context creation/destruction is not a performance critical path and the critical section is not large a single spinlock is used for simplicity. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alistair Popple <alistair@popple.id.au> Reviewed-by: Mark Hairgrove <mhairgrove@nvidia.com> Tested-by: Mark Hairgrove <mhairgrove@nvidia.com> Reviewed-by: Balbir Singh <bsingharora@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24powerpc/powernv/memtrace: Let the arch hotunplug code flush cacheBalbir Singh1-17/+0
Don't do this via custom code, instead now that we have support in the arch hotplug/hotunplug code, rely on those routines to do the right thing. The existing flush doesn't work because it uses ppc64_caches.l1d.size instead of ppc64_caches.l1d.line_size. Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing") Signed-off-by: Balbir Singh <bsingharora@gmail.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24powerpc/mm: Flush cache on memory hot(un)plugBalbir Singh1-0/+2
This patch adds support for flushing potentially dirty cache lines when memory is hot-plugged/hot-un-plugged. The support is currently limited to 64 bit systems. The bug was exposed when mappings for a device were actually hot-unplugged and plugged in back later. A similar issue was observed during the development of memtrace, but memtrace does it's own flushing of region via a custom routine. These patches do a flush both on hotplug/unplug to clear any stale data in the cache w.r.t mappings, there is a small race window where a clean cache line may be created again just prior to tearing down the mapping. The patches were tested by disabling the flush routines in memtrace and doing I/O on the trace file. The system immediately checkstops (quite reliablly if prior to the hot-unplug of the memtrace region, we memset the regions we are about to hot unplug). After these patches no custom flushing is needed in the memtrace code. Fixes: 9d5171a8f248 ("powerpc/powernv: Enable removal of memory for in memory tracing") Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Balbir Singh <bsingharora@gmail.com> Acked-by: Reza Arbab <arbab@linux.ibm.com> Reviewed-by: Rashmica Gupta <rashmica.g@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-24drm/i915/kbl: Add KBL GT2 skuMatt Atwood1-0/+1
Adding a missing GT2 sku discovered off hardware. Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Clint Taylor <clinton.a.taylor@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1524522483-19987-1-git-send-email-matthew.s.atwood@intel.com
2018-04-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller10-171/+200
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for your net tree, they are: 1) Fix SIP conntrack with phones sending session descriptions for different media types but same port numbers, from Florian Westphal. 2) Fix incorrect rtnl_lock mutex logic from IPVS sync thread, from Julian Anastasov. 3) Skip compat array allocation in ebtables if there is no entries, also from Florian. 4) Do not lose left/right bits when shifting marks from xt_connmark, from Jack Ma. 5) Silence false positive memleak in conntrack extensions, from Cong Wang. 6) Fix CONFIG_NF_REJECT_IPV6=m link problems, from Arnd Bergmann. 7) Cannot kfree rule that is already in list in nf_tables, switch order so this error handling is not required, from Florian Westphal. 8) Release set name in error path, from Florian. 9) include kmemleak.h in nf_conntrack_extend.c, from Stepheh Rothwell. 10) NAT chain and extensions depend on NF_TABLES. 11) Out of bound access when renaming chains, from Taehee Yoo. 12) Incorrect casting in xt_connmark leads to wrong bitshifting. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23mtd: spi-nor: cadence-quadspi: Fix page fault kernel panicThor Thayer1-2/+17
The current Cadence QSPI driver caused a kernel panic when loading a Root Filesystem from QSPI. The problem was caused by reading more bytes than needed because the QSPI operated on 4 bytes at a time. <snip> [ 7.947754] spi_nor_read[1048]:from 0x037cad74, len 1 [bfe07fff] [ 7.956247] cqspi_read[910]:offset 0x58502516, buffer=bfe07fff [ 7.956247] [ 7.966046] Unable to handle kernel paging request at virtual address bfe08002 [ 7.973239] pgd = eebfc000 [ 7.975931] [bfe08002] *pgd=2fffb811, *pte=00000000, *ppte=00000000 </snip> Notice above how only 1 byte needed to be read but by reading 4 bytes into the end of a mapped page, an unrecoverable page fault occurred. This patch uses a temporary buffer to hold the 4 bytes read and then copies only the bytes required into the buffer. A min() function is used to limit the length to prevent buffer overflows. Request testing of this patch on other platforms. This was tested on the Intel Arria10 SoCFPGA DevKit. Fixes: 0cf1725676a97fc8 ("mtd: spi-nor: cqspi: Fix build on arches missing readsl/writesl") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-04-23drm/vc4: Add CTM registers to debugfsStefan Schake1-0/+4
Now that we set the OLED* registers to do CTM, it's helpful to have them in the register dump. Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180420122545.40014-2-stschake@gmail.com
2018-04-23drm/vc4: Add CTM supportStefan Schake4-1/+215
The hardware has a single block for applying a CTM prior to gamma lut. It can be fed with pixels from one of our CRTC at a time and uses a matrix with S0.9 scalars. Use private atomic state to reject attempts from userland to apply CTM for more than one CRTC at a time and reject matrices with scalars that we can't approximate without integer bits. Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/218067/
2018-04-23drm/vc4: Add support for plane alphaStefan Schake2-4/+18
The HVS supports mixing fixed alpha with per-pixel alpha or setting a fixed plane alpha in case there is no per-pixel information. This allows us to support the generic DRM plane alpha property. Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180421000954.18936-1-stschake@gmail.com
2018-04-23gpu: drm: vc4: simplify getting .drvdataWolfram Sang1-2/+1
We should get drvdata from struct device directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20180419140641.27926-17-wsa+renesas@sang-engineering.com
2018-04-23dt-bindings: drm/bridge: Document Cadence DSI bridge bindingsBoris Brezillon1-0/+133
Document the bindings used for the Cadence DSI bridge. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-2-boris.brezillon@bootlin.com
2018-04-23drm/bridge: Add Cadence DSI driverBoris Brezillon3-0/+1634
Add a driver for Cadence DPI -> DSI bridge. This driver only support a subset of Cadence DSI bridge capabilities. This driver has been tested/debugged in a simulated environment which explains why some of the features are missing. Here is a non-exhaustive list of missing features: * burst mode * DPHY init/configuration steps * support for additional input interfaces (SDI input) DSI commands and non-burst video mode have been tested. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Acked-by: Eric Anholt <eric@anholt.net> Reviewed-by: Archit Taneja <architt@codeaurora.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180421070846.10330-1-boris.brezillon@bootlin.com
2018-04-23arm64: add sentinel to kpti_safe_listMark Rutland1-0/+1
We're missing a sentinel entry in kpti_safe_list. Thus is_midr_in_range_list() can walk past the end of kpti_safe_list. Depending on the contents of memory, this could erroneously match a CPU's MIDR, cause a data abort, or other bad outcomes. Add the sentinel entry to avoid this. Fixes: be5b299830c63ed7 ("arm64: capabilities: Add support for checks based on a list of MIDRs") Signed-off-by: Mark Rutland <mark.rutland@arm.com> Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Tested-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-04-23ipv6: add RTA_TABLE and RTA_PREFSRC to rtm_ipv6_policyEric Dumazet1-0/+2
KMSAN reported use of uninit-value that I tracked to lack of proper size check on RTA_TABLE attribute. I also believe RTA_PREFSRC lacks a similar check. Fixes: 86872cb57925 ("[IPv6] route: FIB6 configuration using struct fib6_config") Fixes: c3968a857a6b ("ipv6: RTA_PREFSRC support for ipv6 route source address selection") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23bonding: do not set slave_dev npinfo before slave_enable_netpoll in bond_enslaveXin Long1-2/+1
After Commit 8a8efa22f51b ("bonding: sync netpoll code with bridge"), it would set slave_dev npinfo in slave_enable_netpoll when enslaving a dev if bond->dev->npinfo was set. However now slave_dev npinfo is set with bond->dev->npinfo before calling slave_enable_netpoll. With slave_dev npinfo set, __netpoll_setup called in slave_enable_netpoll will not call slave dev's .ndo_netpoll_setup(). It causes that the lower dev of this slave dev can't set its npinfo. One way to reproduce it: # modprobe bonding # brctl addbr br0 # brctl addif br0 eth1 # ifconfig bond0 192.168.122.1/24 up # ifenslave bond0 eth2 # systemctl restart netconsole # ifenslave bond0 br0 # ifconfig eth2 down # systemctl restart netconsole The netpoll won't really work. This patch is to remove that slave_dev npinfo setting in bond_enslave(). Fixes: 8a8efa22f51b ("bonding: sync netpoll code with bridge") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-23ceph: check if mds create snaprealm when setting quotaYan, Zheng1-3/+25
If mds does not, return -EOPNOTSUPP. Link: http://tracker.ceph.com/issues/23491 Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2018-04-23perf record: Fix s390 undefined record__auxtrace_init() return valueThomas Richter1-0/+1
Command 'perf record' calls: cmd_report() record__auxtrace_init() auxtrace_record__init() On s390 function auxtrace_record__init() returns random return value due to missing initialization. This sometime causes 'perf record' to exit immediately without error message and creating a perf.data file. Fix this by setting error the return code to zero before returning from platform specific functions which may not set the error code in call cases. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423142940.21143-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf mem: Document incorrect and missing optionsSangwon Hong1-12/+29
Several options were incorrectly described, some lacked describing required arguments while others were simply not documented, fix it. Signed-off-by: Sangwon Hong <qpakzk@gmail.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Taeung Song <treeze.taeung@gmail.com> Link: http://lkml.kernel.org/r/1524382146-19609-1-git-send-email-qpakzk@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf evsel: Disable write_backward for leader sampling group eventsJiri Olsa2-2/+8
.. and other related fields that do not need to be enabled for events that have sampling leader. It fixes the perf top usage Ingo reported broken: # perf top -e '{cycles,msr/aperf/}:S' The 'msr/aperf/' event is configured for write_back sampling, which is not allowed by the MSR PMU, so it fails to create the event. Adjusting related attr test. Reported-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-6-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23ALSA: usb-audio: Fix forgotten conversion of control query functionsTakashi Iwai1-1/+2
The recent code refactoring made the argument for some helper functions to be the explicit UAC_CS_* and UAC2_CS_* value instead of 0-based offset. However, there was one place left forgotten, and it caused a regression on some devices appearing as the inconsistent mixer setup. This patch corrects the forgotten conversion. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199449 Fixes: 21e9b3e931f7 ("ALSA: usb-audio: fix uac control query argument") Tested-by: Nazar Mokrynskyi <nazar@mokrynskyi.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23ALSA: control: Fix missing __user annotationTakashi Iwai1-1/+1
There is one place missing __user annotation to the pointer used by the recent code refactoring. Reported by sparse. Fixes: 450296f305f1 ("ALSA: control: code refactoring TLV ioctl handler") Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-23perf pmu: Fix pmu events parsing ruleJiri Olsa1-4/+4
Currently all the event parsing fails end up in the event_pmu rule, and display misleading help like: $ perf stat -e inst kill event syntax error: 'inst' \___ Cannot find PMU `inst'. Missing kernel support? ... The reason is that the event_pmu is too strong and match also single string. Changing it to force the '/' separators to be part of the rule, and getting the proper error now: $ perf stat -e inst kill event syntax error: 'inst' \___ parser error Run 'perf list' for a list of valid events ... Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reported-by: Ingo Molnar <mingo@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-5-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf stat: Keep the / modifier separator in fallbackJiri Olsa1-1/+7
The 'perf stat' fallback for EACCES error sets the exclude_kernel perf_event_attr and tries perf_event_open() again with it. In addition, it also changes the name of the event to reflect that change by adding the 'u' modifier. But it does not take into account the '/' separator, so the event name can end up mangled, like: (note the '/:' characters) $ perf stat -e cpu/cpu-cycles/ kill ... 386,832 cpu/cpu-cycles/:u Adding the code to check on the '/' separator and set the following correct event name: $ perf stat -e cpu/cpu-cycles/ kill ... 388,548 cpu/cpu-cycles/u Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20180423090823.32309-4-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf test: Adapt test case record+probe_libc_inet_pton.sh for s390Thomas Richter1-4/+2
perf test case 58 (record+probe_libc_inet_pton.sh) executed on s390x using kernel 4.16.0rc3 displays this result: # perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1 probe_libc:inet_pton: (3ffa0240448) __GI___inet_pton (/usr/lib64/libc-2.26.so) gaih_inet (inlined) __GI_getaddrinfo (inlined) main (/usr/bin/ping) __libc_start_main (/usr/lib64/libc-2.26.so) _start (/usr/bin/ping) After I installed kernel 4.16.0 the same tests uses commands: # perf record -e probe_libc:inet_pton/call-graph=dwarf/ -o /tmp/perf.data.abc ping -6 -c 1 ::1 # perf script -i /tmp/perf.data.abc and displays: ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) Nothing else changed including glibc elfutils and other libraries picked up by the build. The entries for __libc_start_main and _start are missing. I bisected missing __libc_start_main and _start to commit Fixes: 3d20c6246690 ("perf unwind: Unwind with libdw doesn't take symfs into account") When I undo this commit I get this call stack on s390: [root@s35lp76 perf]# ./perf script -i /tmp/perf.data.abc ping 39048 [006] 84230.381198: probe_libc:inet_pton: (3ffa0240448) 140448 __GI___inet_pton (/usr/lib64/libc-2.26.so) fbde1 gaih_inet (inlined) fe2b9 __GI_getaddrinfo (inlined) 398d main (/usr/bin/ping) 22fbd __libc_start_main (/usr/lib64/libc-2.26.so) 457b _start (/usr/bin/ping) Looks like dwarf functions dwfl_xxx create different call back stack trace when using file /usr/lib/debug/usr/bin/ping-20161105-7.fc27.s390x.debug instead of file /usr/bin/ping. Fix this test case on s390 and do not expect any call back stack entry after the main() function. Also be more robust and accept a leading __GI_ prefix in front of getaddrinfo. On x86 this test case shows the same call stack using both kernel versions 4.16.0rc3 and 4.16.0 and also stops at main: [root@f27 perf]# ./perf script -i /tmp/perf.data.tmr ping 4446 [000] 172.027088: probe_libc:inet_pton: (7fdfa08c93c0) 1393c0 __GI___inet_pton (/usr/lib64/libc-2.26.so) fe60d getaddrinfo (/usr/lib64/libc-2.26.so) 2f40 main (/usr/bin/ping) [root@f27 perf]# Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Martin Vuille <jpmv27@aim.com> Link: http://lkml.kernel.org/r/20180423082428.7930-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23perf list: Remove s390 specific strcmp_cpuid_cmp functionThomas Richter3-24/+6
Make the type field in pmu-events/arch/s390/mapfile.cvs more generic to match the created cpuid string for s390. The pattern also checks for the counter first version number and counter second version number ([13]\.[1-5]) and the authorization field which follows. These numbers do not exist in the cpuid identification string when perf commands are executed on a z/VM environment (which does not support CPU counter measurement facility). CPUID string for LPAR: cpuid : IBM,3906,704,M03,3.5,002f CPUID string for z/VM: cpuid : IBM,2964,702,N96 This allows the removal of s390 specific cpuid compare code and uses the common compare function with its regular expression matching algorithm. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Link: http://lkml.kernel.org/r/20180423081745.3672-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-23USB: musb: dsps: drop duplicate phy initialisationJohan Hovold1-2/+0
Since commit 39cee200c23e ("usb: musb: core: call init and shutdown for the usb phy") the musb USB phy is initialised by musb_core, but the original initialisation in the dsps-glue init callback was left in place resulting in two calls to phy init during probe (and similarly, two shutdowns on remove). Drop the duplicate phy init and shutdown calls from the dsps glue in favour of the ones in musb core, which other glue drivers rely on. Note however that any generic phy is still initialised in the glue init callback (just as for the other drivers). Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23USB: musb: host: prevent core phy initialisationJohan Hovold1-0/+1
Set the new HCD flag which prevents USB core from trying to manage our phys. This is needed to be able to associate the controller platform device with the glue device device-tree node on the BBB which uses legacy USB phys. Otherwise, the generic phy lookup in usb_phy_roothub_init() and thus HCD registration fails repeatedly with -EPROBE_DEFER (see commit 178a0bce05cb ("usb: core: hcd: integrate the PHY wrapper into the HCD core")). Note that a related phy-lookup issue was recently worked around in the phy core by commit b7563e2796f8 ("phy: work around 'phys' references to usb-nop-xceiv devices"). Something similar may now be needed for other USB phys, and in particular if we eventually want to let USB core manage musb generic phys. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23staging: wilc1000: fix NULL pointer exception in ↵Ajay Singh1-1/+1
host_int_parse_assoc_resp_info() Commit fe014d4e6b55 (staging: wilc1000: free memory allocated for general info message from firmware) introduced a bug by using wrong source address in kmemdup(). 'conn_info.req_ies' is used for source address in kempdup() instead of 'hif_drv->usr_conn_req.ies'. This commit fixes the NULL pointer dereference issue in host_int_parse_assoc_resp_info() by using the correct source address in kmemdup(). Fixes: fe014d4e6b55 (staging: wilc1000: free memory allocated for general info message from firmware) Signed-off-by: Ajay Singh <ajay.kathat@microchip.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 09:53:40 +0300