summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-10rtw88: coex: coding style adjustmentChing-Te Ku3-24/+30
Adjust space and comments, and fix "line over 80 characters" warnings reported by checkpatch. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201109085909.9143-5-pkshih@realtek.com
2020-11-10rtw88: coex: reduce magic numberChing-Te Ku3-40/+58
Use macro definition to replace magic number. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201109085909.9143-4-pkshih@realtek.com
2020-11-10rtw88: coex: update coex parameter to improve A2DP qualityChing-Te Ku4-50/+52
Update COEX parameters and logic to enhance WL/BT performance while WL_Busy + A2DP in a less interference environment. It can avoid the interference comes cross from each other and earned more performance. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201109085909.9143-3-pkshih@realtek.com
2020-11-10rtw88: coex: fixed some wrong register definition and settingChing-Te Ku6-17/+15
Some register definition and bit definition were incorrect. e.g. REG_BT_COEX_V2 should be word alignment to meet the coding style. e.g. set REG_BT_TDMA_TIME[5:0]=0x5, But the original is to set REG_BT_TDMA_TIME[7:0]=0x5. This will cause unexpected hardware behavior. Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201109085909.9143-2-pkshih@realtek.com
2020-11-10rtlwifi: fix spelling typo of workaroundWang Qing1-2/+2
workarould -> workaround Signed-off-by: Wang Qing <wangqing@vivo.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1604738439-24794-1-git-send-email-wangqing@vivo.com
2020-11-10rsi: Clean up loop in the interrupt handlerMarek Vasut1-63/+58
The inner do { ... } while loop is completely useless, all it does is iterate over a switch-case statement, one bit at a time. This can easily be replaced by simple if (status & bit) { ... } tests for each bit. No functional change. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-2-marex@denx.de
2020-11-10rsi: Move card interrupt handling to RX threadMarek Vasut3-51/+15
The interrupt handling of the RS911x is particularly heavy. For each RX packet, the card does three SDIO transactions, one to read interrupt status register, one to RX buffer length, one to read the RX packet(s). This translates to ~330 uS per one cycle of interrupt handler. In case there is more incoming traffic, this will be more. The drivers/mmc/core/sdio_irq.c has the following comment, quote "Just like traditional hard IRQ handlers, we expect SDIO IRQ handlers to be quick and to the point, so that the holding of the host lock does not cover too much work that doesn't require that lock to be held." The RS911x interrupt handler does not fit that. This patch therefore changes it such that the entire IRQ handler is moved to the RX thread instead, and the interrupt handler only wakes the RX thread. This is OK, because the interrupt handler only does things which can also be done in the RX thread, that is, it checks for firmware loading error(s), it checks buffer status, it checks whether a packet arrived and if so, reads out the packet and passes it to network stack. Moreover, this change permits removal of a code which allocated an skbuff only to get 4-byte-aligned buffer, read up to 8kiB of data into the skbuff, queue this skbuff into local private queue, then in RX thread, this buffer is dequeued, the data in the skbuff as passed to the RSI driver core, and the skbuff is deallocated. All this is replaced by directly calling the RSI driver core with local buffer. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Angus Ainslie <angus@akkea.ca> Cc: David S. Miller <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: Lee Jones <lee.jones@linaro.org> Cc: Martin Kepplinger <martink@posteo.de> Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Tested-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201103180941.443528-1-marex@denx.de
2020-11-10mwifiex: pcie: skip cancel_work_sync() on reset failure pathTsuchiya Yuto2-1/+19
If a reset is performed, but even the reset fails for some reasons (e.g., on Surface devices, the fw reset requires another quirks), cancel_work_sync() hangs in mwifiex_cleanup_pcie(). # firmware went into a bad state [...] [ 1608.281690] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 1608.282724] mwifiex_pcie 0000:03:00.0: rx_pending=0, tx_pending=1, cmd_pending=0 [ 1608.292400] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 1608.292405] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed # reset performed after firmware went into a bad state [ 1609.394320] mwifiex_pcie 0000:03:00.0: WLAN FW already running! Skip FW dnld [ 1609.394335] mwifiex_pcie 0000:03:00.0: WLAN FW is active # but even the reset failed [ 1619.499049] mwifiex_pcie 0000:03:00.0: mwifiex_cmd_timeout_func: Timeout cmd id = 0xfa, act = 0xe000 [ 1619.499094] mwifiex_pcie 0000:03:00.0: num_data_h2c_failure = 0 [ 1619.499103] mwifiex_pcie 0000:03:00.0: num_cmd_h2c_failure = 0 [ 1619.499110] mwifiex_pcie 0000:03:00.0: is_cmd_timedout = 1 [ 1619.499117] mwifiex_pcie 0000:03:00.0: num_tx_timeout = 0 [ 1619.499124] mwifiex_pcie 0000:03:00.0: last_cmd_index = 0 [ 1619.499133] mwifiex_pcie 0000:03:00.0: last_cmd_id: fa 00 07 01 07 01 07 01 07 01 [ 1619.499140] mwifiex_pcie 0000:03:00.0: last_cmd_act: 00 e0 00 00 00 00 00 00 00 00 [ 1619.499147] mwifiex_pcie 0000:03:00.0: last_cmd_resp_index = 3 [ 1619.499155] mwifiex_pcie 0000:03:00.0: last_cmd_resp_id: 07 81 07 81 07 81 07 81 07 81 [ 1619.499162] mwifiex_pcie 0000:03:00.0: last_event_index = 2 [ 1619.499169] mwifiex_pcie 0000:03:00.0: last_event: 58 00 58 00 58 00 58 00 58 00 [ 1619.499177] mwifiex_pcie 0000:03:00.0: data_sent=0 cmd_sent=1 [ 1619.499185] mwifiex_pcie 0000:03:00.0: ps_mode=0 ps_state=0 [ 1619.499215] mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device # mwifiex_pcie_work hang happening [ 1823.233923] INFO: task kworker/3:1:44 blocked for more than 122 seconds. [ 1823.233932] Tainted: G WC OE 5.10.0-rc1-1-mainline #1 [ 1823.233935] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1823.233940] task:kworker/3:1 state:D stack: 0 pid: 44 ppid: 2 flags:0x00004000 [ 1823.233960] Workqueue: events mwifiex_pcie_work [mwifiex_pcie] [ 1823.233965] Call Trace: [ 1823.233981] __schedule+0x292/0x820 [ 1823.233990] schedule+0x45/0xe0 [ 1823.233995] schedule_timeout+0x11c/0x160 [ 1823.234003] wait_for_completion+0x9e/0x100 [ 1823.234012] __flush_work.isra.0+0x156/0x210 [ 1823.234018] ? flush_workqueue_prep_pwqs+0x130/0x130 [ 1823.234026] __cancel_work_timer+0x11e/0x1a0 [ 1823.234035] mwifiex_cleanup_pcie+0x28/0xd0 [mwifiex_pcie] [ 1823.234049] mwifiex_free_adapter+0x24/0xe0 [mwifiex] [ 1823.234060] _mwifiex_fw_dpc+0x294/0x560 [mwifiex] [ 1823.234074] mwifiex_reinit_sw+0x15d/0x300 [mwifiex] [ 1823.234080] mwifiex_pcie_reset_done+0x50/0x80 [mwifiex_pcie] [ 1823.234087] pci_try_reset_function+0x5c/0x90 [ 1823.234094] process_one_work+0x1d6/0x3a0 [ 1823.234100] worker_thread+0x4d/0x3d0 [ 1823.234107] ? rescuer_thread+0x410/0x410 [ 1823.234112] kthread+0x142/0x160 [ 1823.234117] ? __kthread_bind_mask+0x60/0x60 [ 1823.234124] ret_from_fork+0x22/0x30 [...] This is a deadlock caused by calling cancel_work_sync() in mwifiex_cleanup_pcie(): - Device resets are done via mwifiex_pcie_card_reset() - which schedules card->work to call mwifiex_pcie_card_reset_work() - which calls pci_try_reset_function(). - This leads to mwifiex_pcie_reset_done() be called on the same workqueue, which in turn calls - mwifiex_reinit_sw() and that calls - _mwifiex_fw_dpc(). The problem is now that _mwifiex_fw_dpc() calls mwifiex_free_adapter() in case firmware initialization fails. That ends up calling mwifiex_cleanup_pcie(). Note that all those calls are still running on the workqueue. So when mwifiex_cleanup_pcie() now calls cancel_work_sync(), it's really waiting on itself to complete, causing a deadlock. This commit fixes the deadlock by skipping cancel_work_sync() on a reset failure path. After this commit, when reset fails, the following output is expected to be shown: kernel: mwifiex_pcie 0000:03:00.0: info: _mwifiex_fw_dpc: unregister device kernel: mwifiex: Failed to bring up adapter: -5 kernel: mwifiex_pcie 0000:03:00.0: reinit failed: -5 To reproduce this issue, for example, try putting the root port of wifi into D3 (replace "00:1d.3" with your setup). # put into D3 (root port) sudo setpci -v -s 00:1d.3 CAP_PM+4.b=0b Cc: Maximilian Luz <luzmaximilian@gmail.com> Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142346.18355-1-kitakar@gmail.com
2020-11-10mwifiex: update comment for shutdown_sw()/reinit_sw() to reflect current stateTsuchiya Yuto1-2/+2
The functions mwifiex_shutdown_sw() and mwifiex_reinit_sw() can be used for more general purposes than the PCIe function level reset. Also, these are even not PCIe-specific. So, let's update the comments at the top of each function accordingly. Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142110.18144-3-kitakar@gmail.com
2020-11-10mwifiex: fix mwifiex_shutdown_sw() causing sw reset failureTsuchiya Yuto1-0/+2
When a PCIe function level reset (FLR) is performed but without fw reset for some reasons (e.g., on Microsoft Surface devices, fw reset requires other quirks), it fails to reset wifi properly. You can trigger the issue on such devices via debugfs entry for reset: $ echo 1 | sudo tee /sys/kernel/debug/mwifiex/mlan0/reset and the resulting dmesg log: [ 45.740508] mwifiex_pcie 0000:03:00.0: Resetting per request [ 45.742937] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 3 [ 45.744666] mwifiex_pcie 0000:03:00.0: info: shutdown mwifiex... [ 45.751530] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.751539] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771691] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771695] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771697] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771698] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771699] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771701] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771702] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771703] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771704] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771705] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 45.771707] mwifiex_pcie 0000:03:00.0: PREP_CMD: card is removed [ 45.771708] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 53.099343] mwifiex_pcie 0000:03:00.0: info: trying to associate to '[SSID]' bssid [BSSID] [ 53.241870] mwifiex_pcie 0000:03:00.0: info: associated to bssid [BSSID] successfully [ 75.377942] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 85.385491] mwifiex_pcie 0000:03:00.0: info: successfully disconnected from [BSSID]: reason code 15 [ 87.539408] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 87.539412] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 99.699917] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 99.699925] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [ 111.859802] mwifiex_pcie 0000:03:00.0: cmd_wait_q terminated: -110 [ 111.859808] mwifiex_pcie 0000:03:00.0: deleting the crypto keys [...] When comparing mwifiex_shutdown_sw() with mwifiex_pcie_remove(), it lacks mwifiex_init_shutdown_fw(). This commit fixes mwifiex_shutdown_sw() by adding the missing mwifiex_init_shutdown_fw(). Fixes: 4c5dae59d2e9 ("mwifiex: add PCIe function level reset support") Signed-off-by: Tsuchiya Yuto <kitakar@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201028142110.18144-2-kitakar@gmail.com
2020-11-07brcmfmac: Fix memory leak for unpaired brcmf_{alloc/free}Seung-Woo Kim2-2/+5
There are missig brcmf_free() for brcmf_alloc(). Fix memory leak by adding missed brcmf_free(). Reported-by: Jaehoon Chung <jh80.chung@samsung.com> Fixes: a1f5aac1765a ("brcmfmac: don't realloc wiphy during PCIe reset") Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603849967-22817-1-git-send-email-sw0312.kim@samsung.com
2020-11-07rtlwifi: rtl8821ae: Place braces around empty if() bodyLee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘_rtl8812ae_phy_get_txpower_limit’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:2453:3: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-35-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8821ae: phy: Remove a couple of unused variablesLee Jones1-3/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c: In function ‘rtl8821ae_phy_switch_wirelessband’: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:14: warning: variable ‘rxpath’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:597:6: warning: variable ‘txpath’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-34-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8723be: Remove set but unused variable 'cck_highpwr'Lee Jones1-3/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c: In function ‘_rtl8723be_query_rxphystatus’: drivers/net/wireless/realtek/rtlwifi/rtl8723be/trx.c:53:6: warning: variable ‘cck_highpwr’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-33-lee.jones@linaro.org
2020-11-07rtlwifi: halbtc8821a2ant: Remove a bunch of unused variablesLee Jones1-15/+12
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_bt_inquiry’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1451:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_wifi_idle_process’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:1519:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:2990:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c: In function ‘btc8821a2ant_action_hid_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a2ant.c:3277:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-31-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8188ee: Remove set but unused variable 'reg_ea4'Lee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c: In function ‘_rtl88e_phy_path_a_iqk’: drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c:1351:33: warning: variable ‘reg_ea4’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-30-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8723be: Remove set but unused variable 'lc_cal'Lee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c: In function ‘_rtl8723be_phy_lc_calibrate’: drivers/net/wireless/realtek/rtlwifi/rtl8723be/phy.c:2181:36: warning: variable ‘lc_cal’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-29-lee.jones@linaro.org
2020-11-07rtlwifi: halbtc8821a1ant: Remove set but unused variable 'wifi_rssi_state'Lee Jones1-3/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c: In function ‘btc8821a1ant_run_coexist_mechanism’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8821a1ant.c:1904:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-28-lee.jones@linaro.org
2020-11-07rtlwifi: phy: Remove set but unused variable 'bbvalue'Lee Jones1-3/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c: In function ‘_rtl8723e_phy_iq_calibrate’: drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c:1150:6: warning: variable ‘bbvalue’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-27-lee.jones@linaro.org
2020-11-07rtlwifi: halbtc8723b2ant: Remove a bunch of set but unused variablesLee Jones1-24/+24
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_wifi_idle_process’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:40: warning: variable ‘bt_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:1631:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_sco’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2767:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2810:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2855:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_a2dp_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2929:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:2976:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_hs’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:22: warning: variable ‘wifi_rssi_state1’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3028:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3066:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_pan_edr_hid’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3121:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp_pan_edr’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3185:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c: In function ‘btc8723b2ant_action_hid_a2dp’: drivers/net/wireless/realtek/rtlwifi/btcoexist/halbtc8723b2ant.c:3244:5: warning: variable ‘wifi_rssi_state’ set but not used [-Wunused-but-set-variable] Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-26-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8192cu: trx: Demote clear abuse of kernel-doc formatLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:455: warning: Function parameter or member 'txdesc' not described in '_rtl_tx_desc_checksum' Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-6-lee.jones@linaro.org
2020-11-07rtlwifi: rtl8192cu: mac: Fix some missing/ill-documented function parametersLee Jones1-4/+3
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Function parameter or member 'hw' not described in 'rtl92c_llt_write' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:124: warning: Excess function parameter 'io' description in 'rtl92c_llt_write' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Function parameter or member 'hw' not described in 'rtl92c_init_llt_table' drivers/net/wireless/realtek/rtlwifi/rtl8192cu/mac.c:155: warning: Excess function parameter 'io' description in 'rtl92c_init_llt_table' Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Larry Finger <Larry.Finger@lwfinger.net> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-4-lee.jones@linaro.org
2020-11-07rtw88: rtw8822c: Remove unused variable 'corr_val'Lee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/realtek/rtw88/rtw8822c.c: In function ‘rtw8822c_dpk_dc_corr_check’: drivers/net/wireless/realtek/rtw88/rtw8822c.c:2445:5: warning: variable ‘corr_val’ set but not used [-Wunused-but-set-variable] Cc: Yan-Hsuan Chuang <yhchuang@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-39-lee.jones@linaro.org Link: https://lore.kernel.org/r/20201102112410.1049272-39-lee.jones@linaro.org
2020-11-07wlcore: spi: Demote a non-compliant function header, fix anotherLee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'child' not described in 'wl12xx_spi_set_block_size' drivers/net/wireless/ti/wlcore/spi.c:403: warning: Function parameter or member 'blksz' not described in 'wl12xx_spi_set_block_size' drivers/net/wireless/ti/wlcore/spi.c:440: warning: Excess function parameter 'res' description in 'wlcore_probe_of' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Luciano Coelho <luciano.coelho@nokia.com> Cc: Juuso Oikarinen <juuso.oikarinen@nokia.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-36-lee.jones@linaro.org Link: https://lore.kernel.org/r/20201102112410.1049272-37-lee.jones@linaro.org
2020-11-07mwifiex: pcie: Remove a couple of unchecked 'ret'sLee Jones1-4/+2
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_pcie_remove’: drivers/net/wireless/marvell/mwifiex/pcie.c:432:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] drivers/net/wireless/marvell/mwifiex/pcie.c: In function ‘mwifiex_cleanup_pcie’: drivers/net/wireless/marvell/mwifiex/pcie.c:3142:6: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com> Cc: Xinming Hu <huxinming820@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-32-lee.jones@linaro.org
2020-11-07wl3501_cs: Fix misspelling and provide missing documentationLee Jones1-5/+3
Fixes the following W=1 kernel build warning(s): In file included from drivers/net/wireless/wl3501_cs.c:57: drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'reg_domain' not described in 'iw_valid_channel' drivers/net/wireless/wl3501_cs.c:143: warning: Excess function parameter 'reg_comain' description in 'iw_valid_channel' drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'data' not described in 'wl3501_send_pkt' drivers/net/wireless/wl3501_cs.c:469: warning: Function parameter or member 'len' not described in 'wl3501_send_pkt' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Fox Chen <mhchen@golf.ccl.itri.org.tw> Cc: de Melo <acme@conectiva.com.br> Cc: Gustavo Niemeyer <niemeyer@conectiva.com> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-25-lee.jones@linaro.org
2020-11-07prism54: isl_ioctl: Fix one function header and demote anotherLee Jones1-3/+2
Fixes the following W=1 kernel build warning(s): from drivers/net/wireless/intersil/prism54/isl_ioctl.c:22: inlined from ‘prism54_get_name’ at drivers/net/wireless/intersil/prism54/isl_ioctl.c:283:2: drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Function parameter or member 'priv' not described in 'prism54_mib_mode_helper' drivers/net/wireless/intersil/prism54/isl_ioctl.c:68: warning: Excess function parameter 'mib' description in 'prism54_mib_mode_helper' drivers/net/wireless/intersil/prism54/isl_ioctl.c:127: warning: Function parameter or member 'priv' not described in 'prism54_mib_init' Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Aurelien Alleaume <slts@free.fr> Cc: Valerio Riedel <hvr@gnu.org> Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-15-lee.jones@linaro.org
2020-11-07wl1251: cmd: Rename 'len' to 'buf_len' in the documentationLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Function parameter or member 'buf_len' not described in 'wl1251_cmd_test' drivers/net/wireless/ti/wl1251/cmd.c:70: warning: Excess function parameter 'len' description in 'wl1251_cmd_test' Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-10-lee.jones@linaro.org
2020-11-07brcmfmac: fweh: Add missing description for 'gfp'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c:394: warning: Function parameter or member 'gfp' not described in 'brcmf_fweh_process_event' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-19-lee.jones@linaro.org
2020-11-07brcmfmac: pcie: Provide description for missing function parameter 'devinfo'Lee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c:766: warning: Function parameter or member 'devinfo' not described in 'brcmf_pcie_bus_console_read' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: "Christian König" <christian.koenig@amd.com> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Cc: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linaro-mm-sig@lists.linaro.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-8-lee.jones@linaro.org
2020-11-07brcmfmac: bcmsdh: Fix description for function parameter 'pktlist'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Function parameter or member 'pktlist' not described in 'brcmf_sdiod_sglist_rw' drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c:380: warning: Excess function parameter 'pkt' description in 'brcmf_sdiod_sglist_rw' Cc: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: Franky Lin <franky.lin@broadcom.com> Cc: Hante Meuleman <hante.meuleman@broadcom.com> Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Cc: Wright Feng <wright.feng@cypress.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: brcm80211-dev-list.pdl@broadcom.com Cc: brcm80211-dev-list@cypress.com Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-7-lee.jones@linaro.org
2020-11-07rsi: rsi_91x_usb_ops: Source file headers are not good candidates for kernel-docLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb_ops.c:22: warning: Incorrect use of kernel-doc format: * rsi_usb_rx_thread() - This is a kernel thread to receive the packets from drivers/net/wireless/rsi/rsi_91x_usb_ops.c:29: warning: Function parameter or member 'common' not described in 'rsi_usb_rx_thread' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-5-lee.jones@linaro.org
2020-11-07rsi: rsi_91x_usb: Fix some basic kernel-doc issuesLee Jones1-2/+4
Fixes the following W=1 kernel build warning(s): drivers/net/wireless/rsi/rsi_91x_usb.c:26: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; ' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Function parameter or member 'endpoint' not described in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:88: warning: Excess function parameter 'addr' description in 'rsi_write_multiple' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'ep_num' not described in 'rsi_rx_urb_submit' drivers/net/wireless/rsi/rsi_91x_usb.c:320: warning: Function parameter or member 'mem_flags' not described in 'rsi_rx_urb_submit' Cc: Amitkumar Karwar <amitkarwar@gmail.com> Cc: Siva Rebbagondla <siva8118@gmail.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: linux-wireless@vger.kernel.org Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201102112410.1049272-3-lee.jones@linaro.org
2020-11-07rt2x00: save survey for every channel visitedMarkov Mikhail2-16/+56
rt2800 only gives you survey for current channel. Survey-based ACS algorithms are failing to perform their job when working with rt2800. Make rt2800 save survey for every channel visited and be able to give away that information. There is a bug registered https://dev.archive.openwrt.org/ticket/19081 and this patch solves the issue. Signed-off-by: Markov Mikhail <markov.mikhail@itmh.ru> sgruszka: remove unused variable Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201104142524.94375-1-stf_xl@wp.pl
2020-11-07rtlwifi: Remove in_interrupt() usage in halbtc_send_bt_mp_operation()Sebastian Andrzej Siewior1-3/+0
halbtc_send_bt_mp_operation() uses in_interrupt() to determine if it is safe to invoke wait_for_completion(). The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. Aside of that in_interrupt() is not correct as it does not catch preempt disabled regions which neither can sleep. halbtc_send_bt_mp_operation() is called from: rtl_watchdog_wq_callback() rtl_btc_periodical() halbtc_get() case BTC_GET_U4_BT_PATCH_VER: halbtc_get_bt_patch_version() which is preemtible context. rtl_c2h_content_parsing() btc_ops->btc_btinfo_notify() rtl_btc_btinfo_notify() exhalbtc_bt_info_notify() ex_btc8723b1ant_bt_info_notify() ex_btc8821a1ant_bt_info_notify() ex_btc8821a2ant_bt_info_notify() btcoexist->btc_set_bt_reg() halbtc_set_bt_reg() rtl_c2h_content_parsing() is in turn called from: rtl_c2hcmd_wq_callback() rtl_c2hcmd_launcher() which is preemptible context and from: _rtl_pci_rx_interrupt rtl_c2hcmd_enqueue() which is obviously not preemptible but limited to C2H_BT_MP commands which does invoke rtl_c2h_content_parsing(). Aside of that it can be reached from: halbtc_get() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() case BTC_GET_U4_BT_FORBIDDEN_SLOT_VAL: halbtc_get_bt_forbidden_slot_val() case BTC_GET_U4_BT_DEVICE_INFO: halbtc_get_bt_device_info() case BTC_GET_U4_SUPPORTED_VERSION: halbtc_get_bt_coex_supported_version() case BTC_GET_U4_SUPPORTED_FEATURE: halbtc_get_bt_coex_supported_feature() btcoexist->btc_get_bt_afh_map_from_bt() halbtc_get_bt_afh_map_from_bt() btcoexist->btc_get_ble_scan_para_from_bt() halbtc_get_ble_scan_para_from_bt() btcoexist->btc_get_ble_scan_type_from_bt() halbtc_get_ble_scan_type_from_bt() btcoexist->btc_get_ant_det_val_from_bt() halbtc_get_ant_det_val_from_bt() btcoexist->btc_get_bt_coex_supported_version() halbtc_get_bt_coex_supported_version() btcoexist->btc_get_bt_coex_supported_feature() halbtc_get_bt_coex_supported_feature() None of these have a caller. Welcome to the wonderful world of HALs and onion layers. Remove in_interrupt() check. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-9-bigeasy@linutronix.de
2020-11-07rtlwifi: Remove in_interrupt() usage in is_any_client_connect_to_ap().Sebastian Andrzej Siewior1-19/+6
is_any_client_connect_to_ap() is using in_interrupt() to determine whether it should acquire the lock prior accessing the list. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The function is called from: - halbtc_get() - halbtc_get() halbtc_get_wifi_link_status() - halbtc_display_dbg_msg() halbtc_display_wifi_status() halbtc_get_wifi_link_status() All top level callers are part of the btc_coexist callback inferface and are never invoked from a context which can hold the lock already. The contexts which hold the lock are either protecting list add/del operations or list walks which never call into any of the btc_coexist interfaces. In fact the conditional is outright dangerous because if this function would be invoked from a BH disabled context the check would avoid taking the lock while on another CPU the list could be manipulated under the lock. Remove the in_interrupt() check and always acquire the lock. To simplify the code further use list_empty() instead of walking the list and counting the entries just to check the count for > 0 at the end. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ping-Ke Shih <pkshih@realtek.com> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-8-bigeasy@linutronix.de
2020-11-07zd1211rw: Remove in_atomic() usage.Sebastian Andrzej Siewior1-15/+0
The usage of in_atomic() in driver code is deprecated as it can not always detect all states where it is not allowed to sleep. All callers are in premptible thread context and all functions invoke core functions which have checks for invalid calling contexts already. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Ulrich Kunitz <kune@deine-taler.de> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-7-bigeasy@linutronix.de
2020-11-07hostap: Remove in_atomic() check.Sebastian Andrzej Siewior1-13/+2
hostap_get_wireless_stats() is the iw_handler_if::get_wireless_stats() callback of this driver. This callback was not allowed to sleep until commit a160ee69c6a46 ("wext: let get_wireless_stats() sleep") in v2.6.32. Remove the therefore pointless in_atomic() check. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Jouni Malinen <j@w1.fi> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-6-bigeasy@linutronix.de
2020-11-07airo: Replace in_atomic() usage.Sebastian Andrzej Siewior1-39/+47
issuecommand() is using in_atomic() to decide if it is safe to invoke schedule() while waiting for the command to be accepted. Usage of in_atomic() for this is only half correct as it can not detect all condition where it is not allowed to schedule(). Also Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. Add an may_sleep argument to issuecommand() indicating when it is save to sleep and change schedule() to cond_resched() because it's pointless to invoke schedule() if there is no request to reschedule. Pass the may_sleep condition through the various call chains leading to issuecommand(). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-5-bigeasy@linutronix.de
2020-11-07airo: Always use JOB_STATS and JOB_EVENTSebastian Andrzej Siewior1-11/+5
issuecommand() is using in_atomic() to decide if it is safe to invoke schedule() while waiting for the command to be accepted. Usage of in_atomic() for this is only half correct as it can not detect all condition where it is not allowed to schedule(). Also Linus clearly requested that code which changes behaviour depending on context should either be seperated or the context be conveyed in an argument passed by the caller, which usually knows the context. Chasing the call chains leading up to issuecommand() is straight forward, but airo_link() and airo_get_stats() would require to pass the context through a quite large amount of functions. As this is ancient hardware, avoid the churn and enforce the invocation of those functions through the JOB machinery. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-4-bigeasy@linutronix.de
2020-11-07airo: Invoke airo_read_wireless_stats() directlySebastian Andrzej Siewior1-17/+5
airo_get_wireless_stats() is the iw_handler_if::get_wireless_stats() callback of this driver. This callback was not allowed to sleep until commit a160ee69c6a46 ("wext: let get_wireless_stats() sleep") in v2.6.32. airo still delegates the readout to a thread, which is not longer necessary. Invoke airo_read_wireless_stats() directly from the callback and remove the now unused JOB_WSTATS handling. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-3-bigeasy@linutronix.de
2020-11-07orinoco: Remove BUG_ON(in_interrupt/irq())Sebastian Andrzej Siewior1-4/+0
The usage of in_irq()/in_interrupt() in drivers is phased out and the BUG_ON()'s based on those are not covering all contexts in which these functions cannot be called. Aside of that BUG_ON() should only be used as last resort, which is clearly not the case here. A broad variety of checks in the invoked functions (always enabled or debug option dependent) cover these conditions already, so the BUG_ON()'s do not really provide additional value. Just remove them. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101211536.2966644-2-bigeasy@linutronix.de
2020-11-07rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devicesTokunori Ikegami1-0/+3
Buffalo WI-U3-866D is supported by the rtl8812au driver. Also RTL8812AU software supports the product RTL8192EU also. So add Buffalo WI-U3-866D with the RTL8192EU driver info. Signed-off-by: Tokunori Ikegami <ikegami.t@gmail.com> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201101173236.7851-1-ikegami.t@gmail.com
2020-11-07rtw88: decide lps deep mode from firmware feature.Chin-Yen Lee7-17/+48
This patch checks the supported lps deep mode from firmware feature, and allows different firmware have different deep power mode. Original module parameter rtw_fw_lps_deep_mode is replaced with rtw_disable_lps_deep_mode for user to disable lps deep mode. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030084826.9034-5-tehuang@realtek.com
2020-11-07rtw88: add C2H response for checking firmware leave lpsChin-Yen Lee6-5/+54
Originally driver checks if firmware has left lps via reading the setting of REG_TCR register. But this way may fail when firmware is frequently changing power state. Therefore, firmware provides a safer option for driver. When firmware leaves lps successfully, it sends a C2H response to inform driver. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030084826.9034-4-tehuang@realtek.com
2020-11-07rtw88: store firmware feature in firmware headerChin-Yen Lee3-1/+23
Some functions need the support of firmware with special version. In order to get the feature of current firmware, we store the information in firmware header and parse after firmware is loaded. The current feature list in firmware header includes checking leave lps via C2H and supported lps deep mode. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030084826.9034-3-tehuang@realtek.com
2020-11-07rtw88: sync the power state between driver and firmwareChin-Yen Lee1-39/+30
In current flow, driver issues power requests to firmware for entering or leaving deep power mode. But driver does not wait for an ack from firmware via reading CPWM register when driver requests to enter deep power mode. The behavior will lead to unsynchronized state between firmware and driver. Furthermore, consecutive same power requests may confuse firmware and leads to unexpected value of CPWM register. This patch ensures that the power request will wait for an ack from firmware and only send one power request each time. Signed-off-by: Chin-Yen Lee <timlee@realtek.com> Signed-off-by: Tzu-En Huang <tehuang@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030084826.9034-2-tehuang@realtek.com
2020-11-07rtw88: coex: separate BLE HID profile from BLE profileChing-Te Ku5-9/+42
BT firmware will report BLE-HID and BLE-RCU in different profile. We can distinguish the two profile from BT info now. Add the coexistence for BLE-HID coexistence, it can make BLE HID work more smoothly. BLE-HID need to Tx/Rx packet more frequently to respond user operation, but RCU doesn't. In the case of RCU coexistence, it will make Wi-Fi have a higher priority to earn more Wi-Fi throughput. If BLE-HID go for the same case, it will make user feel mouse is lagging. Desired BT firmware BT-COEX version: 0x1c Desired WL firmware version: 9.9 Signed-off-by: Ching-Te Ku <ku920601@realtek.com> Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201030055506.6560-1-pkshih@realtek.com
2020-11-07rtlwifi: Fix non-canonical address access issuesWeitaoWangoc1-1/+0
During realtek USB wireless NIC initialization, it's unexpected disconnection will cause urb sumbmit fail. On the one hand, _rtl_usb_cleanup_rx will be called to clean up rx stuff, especially for rtl_wq. On the other hand, disconnection will cause rtl_usb_disconnect and _rtl_usb_cleanup_rx to be called. So, rtl_wq will be flush/destroy twice, which will cause non-canonical address 0xdead000000000122 access and general protection fault. Fixed this issue by remove _rtl_usb_cleanup_rx when urb sumbmit fail. Signed-off-by: WeitaoWangoc <WeitaoWang-oc@zhaoxin.com> Acked-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1603768580-2798-1-git-send-email-WeitaoWang-oc@zhaoxin.com
2020-11-07brcmfmac: fix SDIO access for big-endian hostRemi Depommier1-4/+4
These full-mac chips use little-endian byte ordering. This patch adds a few missing conversions to/from little-endian so that the driver may be used with a big-endian host. Signed-off-by: Remi Depommier <rde@setrix.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20201020174639.28892-1-rde@setrix.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 23:19:18 +0300