| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
PMK8350 is shipped on SID6 with some SoCs, for example with SM6375.
Add some preprocessor logic to allow changing the SID in cases like
this.
While I am not in favour of adding #if's into the device tree, this
is the least messy way to handle this. If one isn't specified, it
will default to 0 (as it has been previously).
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221115152727.9736-3-konrad.dybcio@linaro.org
|
|
Add device node and required pinctrl settings (as well as a fixup for
an existing one, whoops!) to support the Samsung Electronics
touchscreen on Nagara devices.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-4-konrad.dybcio@linaro.org
|
|
Add a device tree for the Xperia 5 IV (pdx224). It's literally the 1 IV
with a smaller body, different panel, one camera lens (not sensor afaict)
swapped out and no 3D iToF sensor, hence the device-specific DT is tiny.
Be sure to follow the vbmeta disablement steps (detailed in pdx223
introduction commit message), otherwise your phone will not boot and
will reject anything and everything with just a non-descriptive
"Your device is corrupted" followed by a sad reboot. This should not
be the case, as vbmeta should be plainly ignored in unlocked state,
but what can we do..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-3-konrad.dybcio@linaro.org
|
|
Turns out 1 IV is not the only Nagara device, reflect that in the DTS.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114095654.34561-2-konrad.dybcio@linaro.org
|
|
Add coresight components for sm8250. STM/ETM are added.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221114091251.13939-1-quic_jinlmao@quicinc.com
|
|
New device support - Xiaomi Mi6 phone
What works:
- storage
- usb
- power regulators
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Konrad Dybcio <konra.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221112203300.536010-3-dsankouski@gmail.com
|
|
This adds support for the Sony Xperia Loire/SmartLoire platform
with a base configuration that is common across all of the
devices that are based on this project.
Also adds a base DT configuration for the Xperia X and Xperia
X Compact (respectively, Suzu and Kugo) which is valid for both
their RoW (single-sim), DSDS (dual-sim) and other regional
variants of these two smartphones, that makes us able to boot
to a UART console.
Please note that, currently, the APC0/1 (cluster 0/1) vregs
are set to a safe voltage in order to ensure boot stability
until a proper solution for CPU DVFS scaling lands.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-12-angelogioacchino.delregno@collabora.com
|
|
This commit adds device trees for MSM8956 and MSM8976 SoCs.
They are *almost* identical, with minor differences, such as
MSM8956 having two A72 cores less.
However, there is a bug in Sony Loire bootloader that requires presence
of all 8 cores in the cpu{} node, so these will not be deleted.
Co-developed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-11-angelogioacchino.delregno@collabora.com
|
|
The PMI8950 features integrated peripherals like ADC, GPIO controller,
MPPs and others.
[luca@z3ntu.xyz: remove pm8950, style changes for 2022 standards, add wled]
Signed-off-by: AngeloGioacchino Del Regno <kholk11@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221101161801.1058969-2-luca@z3ntu.xyz
|
|
The PM8950 features integrated peripherals like ADC, GPIO controller,
MPPs, PON keys and others.
Add them to DT files that will be imported on boards having this PMIC
combo (or one of them, anyways).
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Co-developed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111120156.48040-10-angelogioacchino.delregno@collabora.com
|
|
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 5aa0d1becd5b ("arm64: dts: qcom: sm8250: switch usb1 qmp phy to USB3+DP mode")
Cc: stable@vger.kernel.org # 5.13
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-3-johan+linaro@kernel.org
|
|
When adding support for the DisplayPort part of the QMP PHY the binding
(and devicetree parser) for the (USB) child node was simply reused and
this has lead to some confusion.
The third DP register region is really the DP_PHY region, not "PCS" as
the binding claims, and lie at offset 0x2a00 (not 0x2c00).
Similarly, there likely are no "RX", "RX2" or "PCS_MISC" regions as
there are for the USB part of the PHY (and in any case the Linux driver
does not use them).
Note that the sixth "PCS_MISC" region is not even in the binding.
Fixes: 23737b9557fe ("arm64: dts: qcom: sm6350: Add USB1 nodes")
Cc: stable@vger.kernel.org # 5.16
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111094729.11842-2-johan+linaro@kernel.org
|
|
The source clock for the reference clock should not be described by the
devicetree binding and instead this relationship should be modelled in
the clock driver.
Update the USB PHY nodes to match the fixed binding.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111093857.11360-4-johan+linaro@kernel.org
|
|
Add the two bwmon instances and define votes for CPU -> LLCC and LLCC ->
DDR, with bandwidth values based on the downstream DeviceTree.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-11-quic_bjorande@quicinc.com
|
|
Add the L3 interconnect path to all CPUs and define the bandwidth
requirements for all opp entries across sc8280xp and sa8540p.
The values are based on the tables reported by the hardware, distributed
such that each value is the largest value, lower than the cluster
frequency.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-9-quic_bjorande@quicinc.com
|
|
Add a device node for the EPSS L3 frequency domain.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-8-quic_bjorande@quicinc.com
|
|
Update all references to OSM or EPSS L3 compatibles, to include the
generic compatible, as defined by the updated binding.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Tested-by: Steev Klimaszewski <steev@kali.org>
Reviewed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221111032515.3460-7-quic_bjorande@quicinc.com
|
|
Update the UFS PHY nodes to match the new binding.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221104092045.17410-3-johan+linaro@kernel.org
|
|
This is not a fix on its own but more a cleanup. Phy qmp pcie driver
currently have a workaround to handle pcs_misc not declared and add
0x400 offset to the pcs reg if pcs_misc is not declared.
Correctly declare pcs_misc reg and reduce PCS size to the common value
of 0x1f0 as done for every other qmp based pcie phy device.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221103212125.17156-2-ansuelsmth@gmail.com
|
|
These devicetrees override a rt5682 node to use the rt5682s compatible,
however, unlike rt5682, rt5682s doesn't have a VBAT supply. Remove the
inexistent supply in the rt5682s nodes.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-9-nfraprado@collabora.com
|
|
The DBVDD and LDO1-IN supplies for rt5682 are required but are missing.
They are supplied by the same power rail as AVDD. Add them.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221102182002.255282-8-nfraprado@collabora.com
|
|
The first PM8540 PMIC has an available RTC block, describe this in the
SA8295P ADP. Mark it as wakeup-source to allow waking the system from
sleep.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221205174309.16733-1-quic_bjorande@quicinc.com
|
|
It is not allowed to call kfree_skb() from hardware interrupt
context or with interrupts being disabled. So remove kfree_skb()
from the spin_lock_irqsave() section and use the already existing
"drop" label in xenvif_start_xmit() for dropping the SKB. At the
same time replace the dev_kfree_skb() call there with a call of
dev_kfree_skb_any(), as xenvif_start_xmit() can be called with
disabled interrupts.
This is XSA-424 / CVE-2022-42328 / CVE-2022-42329.
Fixes: be81992f9086 ("xen/netback: don't queue unlimited number of packages")
Reported-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In some cases, the frontend may send a packet where the protocol headers
are spread across multiple slots. This would result in netback creating
an skb where the protocol headers spill over into the non-linear area.
Some drivers and NICs don't handle this properly resulting in an
interface reset or worse.
This issue was introduced by the removal of an unconditional skb pull in
the tx path to improve performance. Fix this without reintroducing the
pull by setting up grant copy ops for as many slots as needed to reach
the XEN_NETBACK_TX_COPY_LEN size. Adjust the rest of the code to handle
multiple copy operations per skb.
This is XSA-423 / CVE-2022-3643.
Fixes: 7e5d7753956b ("xen-netback: remove unconditional __pskb_pull_tail() in guest Tx path")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Fix the potential risk of OOB if skb_linearize() fails in
tipc_link_proto_rcv().
Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.
Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is warning report about of_node refcount leak
while probing mdio device:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@710700c0/ethernet@4
In of_mdiobus_register_device(), we increase fwnode refcount
by fwnode_handle_get() before associating the of_node with
mdio device, but it has never been decreased in normal path.
Since that, in mdio_device_release(), it needs to call
fwnode_handle_put() in addition instead of calling kfree()
directly.
After above, just calling mdio_device_free() in the error handle
path of of_mdiobus_register_device() is enough to keep the
refcount balanced.
Fixes: a9049e0c513c ("mdio: Add support for mdio drivers.")
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20221203073441.3885317-1-zengheng4@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after
calling this, dereferencing skb may trigger use-after-free.
Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver")
Signed-off-by: Liu Jian <liujian56@huawei.com>
Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The nicvf_probe() won't destroy workqueue when register_netdev()
failed. Add destroy_workqueue err handle case to fix this issue.
Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.")
Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The skb is delivered to napi_gro_receive() which may free it, after calling this,
dereferencing skb may trigger use-after-free.
Fixes: 1c59eb678cbd ("ravb: Fillup ravb_rx_gbeth() stub")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20221203092941.10880-1-yuehaibing@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
* for-next/undef-traps:
arm64: armv8_deprecated: fix unused-function error
arm64: armv8_deprecated: rework deprected instruction handling
arm64: armv8_deprecated: move aarch32 helper earlier
arm64: armv8_deprecated move emulation functions
arm64: armv8_deprecated: fold ops into insn_emulation
arm64: rework EL0 MRS emulation
arm64: factor insn read out of call_undef_hook()
arm64: factor out EL1 SSBS emulation hook
arm64: split EL0/EL1 UNDEF handlers
arm64: allow kprobes on EL0 handlers
|
|
* for-next/trivial:
arm64: alternatives: add __init/__initconst to some functions/variables
arm64/asm: Remove unused assembler DAIF save/restore macros
arm64/kpti: Move DAIF masking to C code
Revert "arm64/mm: Drop redundant BUG_ON(!pgtable_alloc)"
arm64/mm: Drop unused restore_ttbr1
arm64: alternatives: make apply_alternatives_vdso() static
arm64/mm: Drop idmap_pg_end[] declaration
arm64/mm: Drop redundant BUG_ON(!pgtable_alloc)
arm64: make is_ttbrX_addr() noinstr-safe
arm64/signal: Document our convention for choosing magic numbers
arm64: atomics: lse: remove stale dependency on JUMP_LABEL
arm64: paravirt: remove conduit check in has_pv_steal_clock
arm64: entry: Fix typo
arm64/booting: Add missing colon to FA64 entry
arm64/mm: Drop ARM64_KERNEL_USES_PMD_MAPS
arm64/asm: Remove unused enable_da macro
|
|
* for-next/sysregs: (39 commits)
arm64/sysreg: Remove duplicate definitions from asm/sysreg.h
arm64/sysreg: Convert ID_DFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_DFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_AFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR5_EL1 to automatic generation
arm64/sysreg: Convert MVFR2_EL1 to automatic generation
arm64/sysreg: Convert MVFR1_EL1 to automatic generation
arm64/sysreg: Convert MVFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR2_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR1_EL1 to automatic generation
arm64/sysreg: Convert ID_PFR0_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR6_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR5_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR4_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR3_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR2_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR1_EL1 to automatic generation
arm64/sysreg: Convert ID_ISAR0_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR4_EL1 to automatic generation
arm64/sysreg: Convert ID_MMFR3_EL1 to automatic generation
...
|
|
* for-next/sve-state:
arm64/fp: Use a struct to pass data to fpsimd_bind_state_to_cpu()
arm64/sve: Leave SVE enabled on syscall if we don't context switch
arm64/fpsimd: SME no longer requires SVE register state
arm64/fpsimd: Load FP state based on recorded data type
arm64/fpsimd: Stop using TIF_SVE to manage register saving in KVM
arm64/fpsimd: Have KVM explicitly say which FP registers to save
arm64/fpsimd: Track the saved FPSIMD state type separately to TIF_SVE
KVM: arm64: Discard any SVE state when entering KVM guests
|
|
* for-next/stacks:
arm64: move on_thread_stack() to <asm/stacktrace.h>
arm64: remove current_top_of_stack()
|
|
* for-next/selftests:
kselftest/arm64: Allow epoll_wait() to return more than one result
kselftest/arm64: Don't drain output while spawning children
kselftest/arm64: Hold fp-stress children until they're all spawned
kselftest/arm64: Set test names prior to starting children
kselftest/arm64: Use preferred form for predicate load/stores
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: fix array_size.cocci warning
kselftest/arm64: Print ASCII version of unknown signal frame magic values
kselftest/arm64: Remove validation of extra_context from TODO
kselftest/arm64: Provide progress messages when signalling children
kselftest/arm64: Check that all children are producing output in fp-stress
|
|
* for-next/perf: (21 commits)
arm_pmu: Drop redundant armpmu->map_event() in armpmu_event_init()
drivers/perf: hisi: Add TLP filter support
Documentation: perf: Indent filter options list of hisi-pcie-pmu
docs: perf: Fix PMU instance name of hisi-pcie-pmu
drivers/perf: hisi: Fix some event id for hisi-pcie-pmu
arm64/perf: Replace PMU version number '0' with ID_AA64DFR0_EL1_PMUVer_NI
perf/amlogic: Remove unused header inclusions of <linux/version.h>
perf/amlogic: Fix build error for x86_64 allmodconfig
dt-binding: perf: Add Amlogic DDR PMU
docs/perf: Add documentation for the Amlogic G12 DDR PMU
perf/amlogic: Add support for Amlogic meson G12 SoC DDR PMU driver
MAINTAINERS: Update HiSilicon PMU maintainers
perf: arm_cspmu: Fix module cyclic dependency
perf: arm_cspmu: Fix build failure on x86_64
perf: arm_cspmu: Fix modular builds due to missing MODULE_LICENSE()s
perf: arm_cspmu: Add support for NVIDIA SCF and MCF attribute
perf: arm_cspmu: Add support for ARM CoreSight PMU driver
perf/smmuv3: Fix hotplug callback leak in arm_smmu_pmu_init()
perf/arm_dmc620: Fix hotplug callback leak in dmc620_pmu_init()
drivers: perf: marvell_cn10k: Fix hotplug callback leak in tad_pmu_init()
...
|
|
* for-next/mm:
arm64: booting: Require placement within 48-bit addressable memory
arm64: mm: kfence: only handle translation faults
arm64/mm: Simplify and document pte_to_phys() for 52 bit addresses
|
|
* for-next/kprobes:
arm64: kprobes: Return DBG_HOOK_ERROR if kprobes can not handle a BRK
arm64: kprobes: Let arch do_page_fault() fix up page fault in user handler
arm64: Prohibit instrumentation on arch_stack_walk()
|
|
* for-next/kdump:
arm64: kdump: Support crashkernel=X fall back to reserve region above DMA zones
arm64: kdump: Provide default size when crashkernel=Y,low is not specified
|
|
* for-next/kbuild:
arm64: remove special treatment for the link order of head.o
|
|
* for-next/insn:
arm64:uprobe fix the uprobe SWBP_INSN in big-endian
arm64: insn: always inline hint generation
arm64: insn: simplify insn group identification
arm64: insn: always inline predicates
arm64: insn: remove aarch64_insn_gen_prefetch()
|
|
* for-next/ftrace:
ftrace: arm64: remove static ftrace
ftrace: arm64: move from REGS to ARGS
ftrace: abstract DYNAMIC_FTRACE_WITH_ARGS accesses
ftrace: rename ftrace_instruction_pointer_set() -> ftrace_regs_set_instruction_pointer()
ftrace: pass fregs to arch_ftrace_set_direct_caller()
|
|
* for-next/fpsimd:
arm64/fpsimd: Make kernel_neon_ API _GPL
|
|
* for-next/ffa:
firmware: arm_ffa: Move comment before the field it is documenting
firmware: arm_ffa: Move constants to header file
|
|
* for-next/errata:
arm64: errata: Workaround possible Cortex-A715 [ESR|FAR]_ELx corruption
arm64: Add Cortex-715 CPU part definition
|
|
* for-next/dynamic-scs:
arm64: implement dynamic shadow call stack for Clang
scs: add support for dynamic shadow call stacks
arm64: unwind: add asynchronous unwind tables to kernel and modules
|
|
The mchp_sparx5_probe() won't destroy workqueue created by
create_singlethread_workqueue() in sparx5_start() when later
inits failed. Add destroy_workqueue in the cleanup_ports case,
also add it in mchp_sparx5_remove()
Fixes: b37a1bae742f ("net: sparx5: add mactable support")
Signed-off-by: Qiheng Lin <linqiheng@huawei.com>
Link: https://lore.kernel.org/r/20221203070259.19560-1-linqiheng@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Although the type I ERSPAN is based on the barebones IP + GRE
encapsulation and no extra ERSPAN header. Report erspan version on GRE
interface looks unreasonable. Fix this by separating the erspan and gre
fill info.
IPv6 GRE does not have this info as IPv6 only supports erspan version
1 and 2.
Reported-by: Jianlin Shi <jishi@redhat.com>
Fixes: f989d546a2d5 ("erspan: Add type I version 0 support.")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: William Tu <u9012063@gmail.com>
Link: https://lore.kernel.org/r/20221203032858.3130339-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
* for-next/cpufeature:
kselftest/arm64: Add SVE 2.1 to hwcap test
arm64/hwcap: Add support for SVE 2.1
kselftest/arm64: Add FEAT_RPRFM to the hwcap test
arm64/hwcap: Add support for FEAT_RPRFM
kselftest/arm64: Add FEAT_CSSC to the hwcap selftest
arm64/hwcap: Add support for FEAT_CSSC
arm64: Enable data independent timing (DIT) in the kernel
|
