summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-14mac80211: extend __rate_control_send_low warningJohannes Berg1-1/+3
This appears to happen occasionally, and if it does we really want even more information than we have now. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: fill low rate even for HAS_RATE_CONTROLJohannes Berg1-2/+2
If HW advertises it has rate control, we skip all of the rate control assignments, but sometimes the data we have here is useful, especially so that we don't have to do the lookups again on which rates are configured and are supported. So do the low rate assignment anyway to help out drivers that might need it. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: use STA info in rate_control_send_low()Johannes Berg4-10/+56
Even if we have a station, we currently call rate_control_send_low() with the NULL station unless further rate control (driver, minstrel) has been initialized. Change this so we can use more information about the station to use a better rate. For example, when we associate with an AP, we will now use the lowest rate it advertised as supported (that we can) rather than the lowest mandatory rate. This aligns our behaviour with most other 802.11 implementations. To make this possible, we need to also ensure that we have non-zero rates at all times, so in case we really have *nothing* pre-fill the supp_rates bitmap with the very lowest mandatory bitmap (11b and 11a on 2.4 and 5 GHz respectively). Additionally, hostapd appears to be giving us an empty supported rates bitmap (it can and should do better, since the STA must have supported for at least the basic rates in the BSS), so ignore any such bitmaps that would actually zero out the supp_rates, and in that case just keep the pre-filled mandatory rates. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: call rate_control_send_low() internallyJohannes Berg10-57/+7
There's no rate control algorithm that *doesn't* want to call it internally, and calling it internally will let us modify its behaviour in the future. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14ieee80211: Add a missing extended capability flag definitionIlan Peer1-0/+7
Add the "OBSS Narrow Bandwidth RU In OFDMA Tolerance Support" flag definition to the definitions of the flags covered by the Extended Capability IE. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14cfg80211: Add a function to iterate all BSS entriesIlan Peer2-0/+41
Add a function that iterates over the BSS entries associated with a given wiphy and calls a callback for each iterated BSS. This can be used by drivers in various ways, e.g., to evaluate some property for all the BSSs in the medium. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: allow turning TWT responder support on and off via netlinkJohn Crispin5-1/+16
Allow the userland daemon to en/disable TWT support for an AP. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> [simplify parsing code] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: dynamically enable the TWT requester support on STA interfacesJohn Crispin2-2/+18
Turn TWT for STA interfaces when they associate and/or receive a beacon where the twt_responder bit has changed. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: require and validate vendor command policyJohannes Berg5-2/+69
Require that each vendor command give a policy of its sub-attributes in NL80211_ATTR_VENDOR_DATA, and then (stricly) check the contents, including the NLA_F_NESTED flag that we couldn't check on the outer layer because there we don't know yet. It is possible to use VENDOR_CMD_RAW_DATA for raw data, but then no nested data can be given (NLA_F_NESTED flag must be clear) and the data is just passed as is to the command. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14mac80211: add ieee80211_get_he_iftype_cap() helperJohn Crispin1-4/+18
This function is similar to ieee80211_get_he_sta_cap() but allows passing the iftype. Also make ieee80211_get_he_sta_cap() use the new helper rather than duplicating the code. Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: add support for SAE authentication offloadChung-Hsien Hsu4-0/+39
Let drivers advertise support for station-mode SAE authentication offload with a new NL80211_EXT_FEATURE_SAE_OFFLOAD flag. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: add WPA3 definition for SAE authenticationChung-Hsien Hsu2-1/+3
Add definition of WPA version 3 for SAE authentication. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14nl80211: add NL80211_ATTR_IFINDEX to port authorized eventChung-Hsien Hsu1-1/+3
Add NL80211_ATTR_IFINDEX attribute to port authorized event to indicate the operating interface of the device. Also put NL80211_ATTR_WIPHY attribute in it to be consistent with the other MLME notifications. Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14gpu: ipu-v3: image-convert: Fix image downsize coefficientsSteve Longerbeam1-2/+4
The output of the IC downsizer unit in both dimensions must be <= 1024 before being passed to the IC resizer unit. This was causing corrupted images when: input_dim > 1024, and input_dim / 2 < output_dim < input_dim Some broken examples were 1920x1080 -> 1024x768 and 1920x1080 -> 1280x1080. Fixes: 70b9b6b3bcb21 ("gpu: ipu-v3: image-convert: calculate per-tile resize coefficients") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline for packed formatsSteve Longerbeam1-1/+3
The input bytesperline calculation for packed pixel formats was incorrect. The min/max clamping values must be multiplied by the packed bits-per-pixel. This was causing corrupted converted images when the input format was RGB4 (probably also other input packed formats). Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Reported-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Suggested-by: Harsha Manjula Mallikarjun <Harsha.ManjulaMallikarjun@in.bosch.com> Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14gpu: ipu-v3: image-convert: Fix input bytesperline width/height alignSteve Longerbeam1-11/+21
The output width and height alignment values were being used in the input bytesperline calculation. Fix by separating local vars w_align and h_align into w_align_in, h_align_in, w_align_out, and h_align_out. Fixes: d966e23d61a2c ("gpu: ipu-v3: image-convert: fix bytesperline adjustment") Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
2019-06-14mac80211: AMPDU handling for Extended Key IDAlexander Wetzel3-44/+61
IEEE 802.11 - 2016 forbids mixing MPDUs with different keyIDs in one A-MPDU. Drivers supporting A-MPDUs and Extended Key ID must actively enforce that requirement due to the available two unicast keyIDs. Allow driver to signal mac80211 that they will not check the keyID in MPDUs when aggregating them and that they expect mac80211 to stop Tx aggregation when rekeying a connection using Extended Key ID. Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-06-14thunderbolt: Implement CIO reset correctly for Titan RidgeMika Westerberg1-60/+74
When starting ICM firmware on Apple systems we need to perform CIO reset as part of the flow. However, it turns out that the reset register has changed to another location in Titan Ridge. Fix this by introducing ->cio_reset() callback with corresponding implementations for Alpine and Titan Ridge. Fixes: c4630d6ae6e3 ("thunderbolt: Start firmware on Titan Ridge Apple systems") Reported-by: Peter Bowen <pzb@amazon.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2019-06-14ARM: davinci: da8xx: specify dma_coherent_mask for lcdcBartosz Golaszewski1-0/+3
The lcdc device is missing the dma_coherent_mask definition causing the following warning on da850-evm: da8xx_lcdc da8xx_lcdc.0: found Sharp_LK043T1DG01 panel ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at kernel/dma/mapping.c:247 dma_alloc_attrs+0xc8/0x110 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 5.2.0-rc3-00077-g16d72dd4891f #18 Hardware name: DaVinci DA850/OMAP-L138/AM18x EVM [<c000fce8>] (unwind_backtrace) from [<c000d900>] (show_stack+0x10/0x14) [<c000d900>] (show_stack) from [<c001a4f8>] (__warn+0xec/0x114) [<c001a4f8>] (__warn) from [<c001a634>] (warn_slowpath_null+0x3c/0x48) [<c001a634>] (warn_slowpath_null) from [<c0065860>] (dma_alloc_attrs+0xc8/0x110) [<c0065860>] (dma_alloc_attrs) from [<c02820f8>] (fb_probe+0x228/0x5a8) [<c02820f8>] (fb_probe) from [<c02d3e9c>] (platform_drv_probe+0x48/0x9c) [<c02d3e9c>] (platform_drv_probe) from [<c02d221c>] (really_probe+0x1d8/0x2d4) [<c02d221c>] (really_probe) from [<c02d2474>] (driver_probe_device+0x5c/0x168) [<c02d2474>] (driver_probe_device) from [<c02d2728>] (device_driver_attach+0x58/0x60) [<c02d2728>] (device_driver_attach) from [<c02d27b0>] (__driver_attach+0x80/0xbc) [<c02d27b0>] (__driver_attach) from [<c02d047c>] (bus_for_each_dev+0x64/0xb4) [<c02d047c>] (bus_for_each_dev) from [<c02d1590>] (bus_add_driver+0xe4/0x1d8) [<c02d1590>] (bus_add_driver) from [<c02d301c>] (driver_register+0x78/0x10c) [<c02d301c>] (driver_register) from [<c000a5c0>] (do_one_initcall+0x48/0x1bc) [<c000a5c0>] (do_one_initcall) from [<c05cae6c>] (kernel_init_freeable+0x10c/0x1d8) [<c05cae6c>] (kernel_init_freeable) from [<c048a000>] (kernel_init+0x8/0xf4) [<c048a000>] (kernel_init) from [<c00090e0>] (ret_from_fork+0x14/0x34) Exception stack(0xc6837fb0 to 0xc6837ff8) 7fa0: 00000000 00000000 00000000 00000000 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ---[ end trace 8a8073511be81dd2 ]--- Add a 32-bit mask to the platform device's definition. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-14ARM: davinci: da850-evm: call regulator_has_full_constraints()Bartosz Golaszewski1-0/+2
The BB expander at 0x21 i2c bus 1 fails to probe on da850-evm because the board doesn't set has_full_constraints to true in the regulator API. Call regulator_has_full_constraints() at the end of board registration just like we do in da850-lcdk and da830-evm. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2019-06-14timekeeping: Repair ktime_get_coarse*() granularityThomas Gleixner1-2/+3
Jason reported that the coarse ktime based time getters advance only once per second and not once per tick as advertised. The code reads only the monotonic base time, which advances once per second. The nanoseconds are accumulated on every tick in xtime_nsec up to a second and the regular time getters take this nanoseconds offset into account, but the ktime_get_coarse*() implementation fails to do so. Add the accumulated xtime_nsec value to the monotonic base time to get the proper per tick advancing coarse tinme. Fixes: b9ff604cff11 ("timekeeping: Add ktime_get_coarse_with_offset") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Clemens Ladisch <clemens@ladisch.de> Cc: Sultan Alsawaf <sultan@kerneltoast.com> Cc: Waiman Long <longman@redhat.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1906132136280.1791@nanos.tec.linutronix.de
2019-06-14Merge tag 'drm-misc-fixes-2019-06-13' of ↵Daniel Vetter11-21/+121
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Sean writes: meson: A few G12A fixes across the driver (Neil) quirks: A couple quirks for GPD devices (Hans) gem_shmem: Use writecombine when vmapping non-dmabuf BOs (Boris) panfrost: A couple tweaks to requiring devfreq (Neil & Ezequiel) edid: Ensure we return the override mode when ddc probe fails (Jani) Cc: Hans de Goede <hdegoede@redhat.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Ezequiel Garcia <ezequiel@collabora.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Sean Paul <sean@poorly.run> Link: https://patchwork.freedesktop.org/patch/msgid/20190613143946.GA24233@art_vandelay
2019-06-14Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops"Hui Wang1-11/+5
This reverts commit 9cb40eb184c4220d244a532bd940c6345ad9dbd9. This patch introduces noise and headphone playback issue after rebooting or suspending/resuming. Let us revert it. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=203831 Fixes: 9cb40eb184c4 ("ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops") Cc: <stable@vger.kernel.org> Signed-off-by: Hui Wang <hui.wang@canonical.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-14r8169: improve rtl_coalesce_infoHeiner Kallweit1-15/+6
tp->coalesce_info is used in rtl_coalesce_info() only, so we can remove this member. In addition replace phy_ethtool_get_link_ksettings with a direct access to tp->phydev->speed. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14r8169: let mdio read functions return -ETIMEDOUTHeiner Kallweit1-4/+4
In case of a timeout currently ~0 is returned. Callers often just check whether a certain bit is set and therefore may behave incorrectly. So let's return -ETIMEDOUT in case of a timeout. r8168_phy_ocp_read is used in r8168g_mdio_read only, therefore we can apply the same change. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: dsa: tag_sja1105: Select CONFIG_PACKINGVladimir Oltean1-0/+1
The packing facility is needed to decode Ethernet meta frames containing source port and RX timestamping information. The DSA driver selects CONFIG_PACKING, but the tagger did not, and since taggers can be now compiled as modules independently from the drivers themselves, this is an issue now, as CONFIG_PACKING is disabled by default on all architectures. Fixes: e53e18a6fe4d ("net: dsa: sja1105: Receive and decode meta frames") Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14net: axienet: move use of resource after validity checkRobert Hancock1-1/+1
We were accessing the pointer returned from platform_get_resource before checking if it was valid, causing an oops if it was not. Move this access after the call to devm_ioremap_resource which does the validity check. Signed-off-by: Robert Hancock <hancock@sedsystems.ca> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge branch 's390-qeth-next'David S. Miller5-416/+351
Julian Wiedmann says: ==================== s390/qeth: updates 2019-06-11 please apply the following patch series for qeth to net-next. This brings all sorts of cleanups and minor improvements, primarily for the control IO path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: allocate a single cmd on read channelJulian Wiedmann4-24/+39
We statically allocate 8 cmd buffers on the read channel, when the only IO left that's still using them is the long-running READ. Replace this with a single allocated cmd, that gets restarted whenever the READ completed. This introduces refcounting for allocated cmds, so that the READ cmd can survive the IO completion. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: command-chain the IDX sequenceJulian Wiedmann1-44/+14
The current IDX sequence first sends one WRITE cmd to activate the device, and then sends a second cmd that READs the response. Using qeth_alloc_cmd(), we can combine this into a single IO with two command-chained CCWs. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: convert RCD code to common IO infrastructureJulian Wiedmann3-90/+46
The RCD code is the last remaining IO path that doesn't use the qeth_send_control_data() infrastructure. Doing so allows us to remove all sorts of custom state machinery and logic in the IRQ handler. Instead of introducing statically allocated cmd buffers for this single IO on the data channel, use the new qeth_alloc_cmd() helper. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: add support for dynamically allocated cmdsJulian Wiedmann2-9/+56
qeth currently uses a fixed set of statically allocated cmd buffers for the read and write IO channels. This (1) doesn't play well with the single RCD cmd we need to issue on the data channel, (2) doesn't provide the necessary flexibility for certain IDX improvements, and (3) is also rather wasteful since the buffers are idle most of the time. Add a new type of cmd buffer that is dynamically allocated, and keeps its ccw chain in the DMA data area. Since this touches most callers of qeth_setup_ccw(), also add a new CCW flags parameter for future usage. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: remove 'channel' parameter from callbacksJulian Wiedmann3-27/+21
Each cmd buffer maintains a pointer to the IO channel that it was/will be issued on. So when dealing with cmd buffers, we don't need to pass around a separate channel pointer. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: convert device-specific trace entriesJulian Wiedmann3-137/+122
The vast majority of SETUP-classified trace entries can be moved to their device-specific trace file. This reduces pollution of the global SETUP file, and provides a consistent trace view of all activity on the device. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: remove OSN-specific IO codeJulian Wiedmann3-37/+10
OSN currently provides a custom code path to submit IPA cmds, without waiting for the cmd response. Replace it with qeth_send_ipa_cmd(), which uses the common qeth_send_control_data() IO infrastructure. By setting a custom iob->callback, we can now provide feedback to the caller about whether the cmd has been successfully submitted to HW. Since the callback then immediately wakes up the reply-waiter object, we maintain the old behaviour of returning early without waiting for the response. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: remove qeth_wait_for_buffer()Julian Wiedmann3-28/+37
The basic MPC initialization sequence is strictly sequential, and waiting for an available cmd buffer should never be necessary. So this change only affects the OSN path, where dangling waiters on an unbounded wait_event() are not desirable. Switch to qeth_get_buffers(), and let OSN callers deal with -ENOMEM. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: clean up setting of BLKT defaultsJulian Wiedmann2-5/+7
When called from qeth_core_probe_device(), qeth_determine_capabilities() initializes the device's BLKT defaults. From all other callers, the ccw_device has already been set online and the BLKT setting is skipped. Clean this up by extracting the BLKT setting into a separate helper that gets called from the right place. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: restart pending READ cmd from callbackJulian Wiedmann1-3/+1
The completion of a pending READ cmd is processed via qeth_issue_next_read_cb(). Let this callback also start the next READ cmd, instead of hardcoding that step into the IRQ handler. While at it remove the check of the channel state, __qeth_issue_next_read() already does this. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: simplify DOWN state handlingJulian Wiedmann2-10/+4
When the tear down sequence in qeth_l?_stop_card() has finished, the card is guaranteed to be in DOWN state and we don't have to check for it again. With this insight we can also remove the redundant setting of card->state in qeth_l?_set_online()'s error path. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: use mm helpersJulian Wiedmann1-17/+16
Slightly reduce the complexity of the core xmit path, by replacing some open-coded logic with the corresponding helpers. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14s390/qeth: don't mask TX errors on IQD devicesJulian Wiedmann1-7/+0
Current code suppresses debug entries when an TX buffer completes in ERROR state with no error indication set in SBALF15. This was introduced back with commit 58490f18071d ("qeth: HiperSockets SIGA retry support on CC=2."). But qeth no longer retries after CC=2, and this sort of suppression make no sense anymore. Remove it. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14Merge branch 'mlxsw-Add-support-for-physical-hardware-clock'David S. Miller15-2/+697
Ido Schimmel says: ==================== mlxsw: Add support for physical hardware clock Shalom says: This patchset adds support for physical hardware clock for Spectrum-1 ASIC only. Patches #1, #2 and #3 add the ability to query the free running clock PCI address. Patches #4 and #5 add two new register, the Management UTC Register and the Management Pulse Per Second Register. Patch #6 publishes scaled_ppm_to_ppb() to allow drivers to use it. Patch #7 adds the physical hardware clock operations. Patch #8 initializes the physical hardware clock. Patch #9 adds a selftest for testing the PTP physical hardware clock. v2 (Richard): * s/ptp_clock_scaled_ppm_to_ppb/scaled_ppm_to_ppb/ * imply PTP_1588_CLOCK in mlxsw Kconfig * s/mlxsw_sp1_ptp_update_phc_settime/mlxsw_sp1_ptp_phc_settime/ * s/mlxsw_sp1_ptp_update_phc_adjfreq/mlxsw_sp1_ptp_phc_adjfreq/ ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14selftests: ptp: Add Physical Hardware Clock testShalom Toledo1-0/+166
Test the PTP Physical Hardware Clock functionality using the "phc_ctl" (a part of "linuxptp"). The test contains three sub-tests: * "settime" test * "adjtime" test * "adjfreq" test "settime" test: * set the PHC time to 0 seconds. * wait for 120.5 seconds. * check if PHC time equal to 120.XX seconds. "adjtime" test: * set the PHC time to 0 seconds. * adjust the time by 10 seconds. * check if PHC time equal to 10.XX seconds. "adjfreq" test: * adjust the PHC frequency to be 1% faster. * set the PHC time to 0 seconds. * wait for 100.5 seconds. * check if PHC time equal to 101.XX seconds. Usage: $ ./phc.sh /dev/ptp<X> It is possible to run a subset of the tests, for example: * To run only the "settime" test: $ TESTS="settime" ./phc.sh /dev/ptp<X> Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: spectrum: PTP physical hardware clock initializationShalom Toledo2-0/+39
Initialize the PTP physical hardware clock. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: spectrum_ptp: Add implementation for physical hardware clock operationsShalom Toledo4-0/+313
Implement physical hardware clock operations. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14ptp: ptp_clock: Publish scaled_ppm_to_ppbShalom Toledo2-1/+10
Publish scaled_ppm_to_ppb to allow drivers to use it. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: reg: Add Management Pulse Per Second RegisterShalom Toledo1-0/+58
The MTPPS register provides the device PPS capabilities, configure the PPS in and out modules and holds the PPS in time stamp. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: reg: Add Management UTC RegisterShalom Toledo1-0/+45
The MTUTC register configures the HW UTC counter. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: pci: Query free running clock PCI BAR and offsetsShalom Toledo2-0/+35
Query free running clock PCI BAR and offsets during the pci_init. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-14mlxsw: core: Add a new interface for reading the hardware free running clockShalom Toledo2-1/+19
Add two new bus operations for reading the hardware free running clock. Signed-off-by: Shalom Toledo <shalomt@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Reviewed-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 22:38:57 +0300