| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch fixes issues with stackframe unwinding and alignment in the
current stack layout for BPF programs on RV32.
In the current layout, RV32 fp points to the JIT scratch registers, rather
than to the callee-saved registers. This breaks stackframe unwinding,
which expects fp to point just above the saved ra and fp registers.
This patch fixes the issue by moving the callee-saved registers to be
stored on the top of the stack, pointed to by fp. This satisfies the
assumptions of stackframe unwinding.
This patch also fixes an issue with the old layout that the stack was
not aligned to 16 bytes.
Stacktrace from JITed code using the old stack layout:
[ 12.196249 ] [<c0402200>] walk_stackframe+0x0/0x96
Stacktrace using the new stack layout:
[ 13.062888 ] [<c0402200>] walk_stackframe+0x0/0x96
[ 13.063028 ] [<c04023c6>] show_stack+0x28/0x32
[ 13.063253 ] [<a403e778>] bpf_prog_82b916b2dfa00464+0x80/0x908
[ 13.063417 ] [<c09270b2>] bpf_test_run+0x124/0x39a
[ 13.063553 ] [<c09276c0>] bpf_prog_test_run_skb+0x234/0x448
[ 13.063704 ] [<c048510e>] __do_sys_bpf+0x766/0x13b4
[ 13.063840 ] [<c0485d82>] sys_bpf+0xc/0x14
[ 13.063961 ] [<c04010f0>] ret_from_syscall+0x0/0x2
The new code is also simpler to understand and includes an ASCII diagram
of the stack layout.
Tested on riscv32 QEMU virt machine.
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Xi Wang <xi.wang@gmail.com>
Link: https://lore.kernel.org/bpf/20200430005127.2205-1-luke.r.nels@gmail.com
|
|
Doug Berger says:
====================
net: bcmgenet: add support for Wake on Filter
Changes in v2:
Corrected Signed-off-by for commit 3/7.
This commit set adds support for waking from 'standby' using a
Rx Network Flow Classification filter specified with ethtool.
The first two commits are bug fixes that should be applied to the
stable branches, but are included in this patch set to reduce merge
conflicts that might occur if not applied before the other commits
in this set.
The next commit consolidates WoL clock managment as a part of the
overall WoL configuration.
The next commit restores a set of functions that were removed from
the driver just prior to the 4.9 kernel release.
The following commit relocates the functions in the file to prevent
the need for additional forward declarations.
Next, support for the Rx Network Flow Classification interface of
ethtool is added.
Finally, support for the WAKE_FILTER wol method is added.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit enables support for the WAKE_FILTER method of Wake on
LAN for the GENET driver. The method can be enabled by adding 'f'
to the interface 'wol' setting specified by ethtool.
Rx network flow rules can be specified using ethtool. Rules that
define a flow-type with the RX_CLS_FLOW_WAKE action (i.e. -2) can
wake the system from the 'standby' power state when the WAKE_FILTER
WoL method is enabled.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit enables driver support for ethtool commands of this form:
ethtool -N|-U|--config-nfc|--config-ntuple devname
flow-type ether|ip4
[src xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]]
[dst xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [proto N [m N]]
[src-ip x.x.x.x [m x.x.x.x]] [dst-ip x.x.x.x [m x.x.x.x]] [tos N [m N]]
[l4proto N [m N]] [src-port N [m N]] [dst-port N [m N]] [spi N [m N]]
[l4data N [m N]] [vlan-etype N [m N]] [vlan N [m N]]
[dst-mac xx:yy:zz:aa:bb:cc [m xx:yy:zz:aa:bb:cc]] [action 0] [loc N] |
delete N
Since there is only one Rx Ring in this implementation action 0 behaves no
differently from not specifying a rule.
The rules can be seen with ethtool commands of this form:
ethtool -n|-u|--show-nfc|--show-ntuple devname [rule N]
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Hardware Filter Block code will be used by ethtool functions
when defining flow types so this commit moves the functions in the
file to prevent the need for prototype declarations.
This is broken out to facilitate review.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit e2072600a24161b7ddcfb26814f69f5fbc8ef85a.
This commit restores the previous implementation of Hardware Filter
Block functions to the file for use in subsequent commits.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The GENET_POWER_WOL_MAGIC power up and power down code configures
the device for WoL when suspending and disables the WoL logic when
resuming. It makes sense that this code should also manage the WoL
clocking.
This commit consolidates the logic and moves it earlier in the
resume sequence.
Since the clock is now only enabled if WoL is successfully entered
the wol_active flag is introduced to track that state to keep the
clock enables and disables balanced in case a suspend is aborted.
The MPD_EN hardware bit can't be used because it can be cleared
when the MAC is reset by a deep sleep.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Broadcom STB chips support a deep sleep mode where all register contents
are lost. Because we were stashing the MagicPacket password into some of
these registers a suspend into that deep sleep then a resumption would
not lead to being able to wake-up from MagicPacket with password again.
Fix this by keeping a software copy of the password and program it
during suspend.
Fixes: c51de7f3976b ("net: bcmgenet: add Wake-on-LAN support code")
Suggested-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This commit explicitly calls the bcmgenet_set_rx_mode() function when
the network interface is started. This function is normally called by
ndo_set_rx_mode when the flags are changed, but apparently not when
the driver is suspended and resumed.
This change ensures that address filtering or promiscuous mode are
properly restored by the driver after the MAC may have been reset.
Fixes: b6e978e50444 ("net: bcmgenet: add suspend/resume callbacks")
Signed-off-by: Doug Berger <opendmb@gmail.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Hiding the only using of bpf_link_type_strs[] in an #ifdef causes
an unused-variable warning:
kernel/bpf/syscall.c:2280:20: error: 'bpf_link_type_strs' defined but not used [-Werror=unused-variable]
2280 | static const char *bpf_link_type_strs[] = {
Move the definition into the same #ifdef.
Fixes: f2e10bff16a0 ("bpf: Add support for BPF_OBJ_GET_INFO_BY_FD for bpf_link")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200429132217.1294289-1-arnd@arndb.de
|
|
Update bpf_sk_assign test to fetch the server socket from SOCKMAP, now that
map lookup from BPF in SOCKMAP is enabled. This way the test TC BPF program
doesn't need to know what address server socket is bound to.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-4-jakub@cloudflare.com
|
|
Now that bpf_map_lookup_elem() is white-listed for SOCKMAP/SOCKHASH,
replace the tests which check that verifier prevents lookup on these map
types with ones that ensure that lookup operation is permitted, but only
with a release of acquired socket reference.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-3-jakub@cloudflare.com
|
|
White-list map lookup for SOCKMAP/SOCKHASH from BPF. Lookup returns a
pointer to a full socket and acquires a reference if necessary.
To support it we need to extend the verifier to know that:
(1) register storing the lookup result holds a pointer to socket, if
lookup was done on SOCKMAP/SOCKHASH, and that
(2) map lookup on SOCKMAP/SOCKHASH is a reference acquiring operation,
which needs a corresponding reference release with bpf_sk_release.
On sock_map side, lookup handlers exposed via bpf_map_ops now bump
sk_refcnt if socket is reference counted. In turn, bpf_sk_select_reuseport,
the only in-kernel user of SOCKMAP/SOCKHASH ops->map_lookup_elem, was
updated to release the reference.
Sockets fetched from a map can be used in the same way as ones returned by
BPF socket lookup helpers, such as bpf_sk_lookup_tcp. In particular, they
can be used with bpf_sk_assign to direct packets toward a socket on TC
ingress path.
Suggested-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429181154.479310-2-jakub@cloudflare.com
|
|
The new libcap dependency is not used for an essential feature of
bpftool, and we could imagine building the tool without checks on
CAP_SYS_ADMIN by disabling probing features as an unprivileged users.
Make it so, in order to avoid a hard dependency on libcap, and to ease
packaging/embedding of bpftool.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-4-quentin@isovalent.com
|
|
There is demand for a way to identify what BPF helper functions are
available to unprivileged users. To do so, allow unprivileged users to
run "bpftool feature probe" to list BPF-related features. This will only
show features accessible to those users, and may not reflect the full
list of features available (to administrators) on the system.
To avoid the case where bpftool is inadvertently run as non-root and
would list only a subset of the features supported by the system when it
would be expected to list all of them, running as unprivileged is gated
behind the "unprivileged" keyword passed to the command line. When used
by a privileged user, this keyword allows to drop the CAP_SYS_ADMIN and
to list the features available to unprivileged users. Note that this
addsd a dependency on libpcap for compiling bpftool.
Note that there is no particular reason why the probes were restricted
to root, other than the fact I did not need them for unprivileged and
did not bother with the additional checks at the time probes were added.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-3-quentin@isovalent.com
|
|
The "full_mode" variable used for switching between full or partial
feature probing (i.e. with or without probing helpers that will log
warnings in kernel logs) was piped from the main do_probe() function
down to probe_helpers_for_progtype(), where it is needed.
Define it as a global variable: the calls will be more readable, and if
other similar flags were to be used in the future, we could use global
variables as well instead of extending again the list of arguments with
new flags.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20200429144506.8999-2-quentin@isovalent.com
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for nf-next:
1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.
2) Remove 128-bit limit on the set element data area, rise it
to 64 bytes.
3) Report EOPNOTSUPP for unsupported NAT types and flags.
4) Set up nft_nat flags from the control plane path.
5) Add helper functions to set up the nf_nat_range2 structure.
6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Karsten Graul says:
====================
net/smc: preparations for SMC-R link failover
This patch series prepares the SMC code for the implementation of SMC-R link
failover capabilities which are still missing to reach full compliance with
RFC 7609.
The code changes are separated into 65 patches which together form the new
functionality. I tried to create meaningful patches which allow to follow the
implementation.
Question: how to handle the remaining 52 patches? All of them are needed for
link failover to work and should make it into the same merge window.
Can I send them all together?
The SMC-R implementation will transparently make use of the link failover
feature when matching RoCE devices are available, no special setup is required.
All RoCE devices with the same PNET ID as the TCP device (hardware-defined or
user-defined via the smc_pnet tool) are candidates to get used to form a link
in a link group. When at least 2 RoCE devices are available on both
communication endpoints then a symmetric link group is formed, meaning the link
group has 2 independent links. If one RoCE device goes down then all connections
on this link are moved to the surviving link. Upon recovery of the failing
device or availability of a new one, the symmetric link group will be restored.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce smc_llc_lgr_init() and smc_llc_lgr_clear() to implement all
llc layer specific initialization and cleanup in module smc_llc.c.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The locks for sndbufs and rmbs are never used from atomic context. Using
a mutex for these locks will allow to nest locks with other mutexes.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When llc responses are received then possible waiters for this response
are to be notified. This can be done in tasklet context, without to
use a work in the llc work queue. Move all code that handles llc
responses into smc_llc_rx_response().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Incoming llc messages are processed in irq tasklet context, and
a worker is used to send outgoing messages. The worker is needed
because getting a send buffer could result in a wait for a free buffer.
To make sure all incoming llc messages are processed in a serialized way
introduce an event queue and create a new queue entry for each message
which is queued to this event queue. A new worker processes the event
queue entries in order.
And remove the use of a separate worker to send outgoing llc messages
because the messages are processed in worker context already.
With this event queue the serialized llc_wq work queue is obsolete,
remove it.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cancel the testlink worker during link clear processing and remove the
extra function smc_llc_link_inactive().
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The testlink work waits for a response to the testlink request and
blocks the single threaded llc_wq. This type of work does not have to be
serialized and can be moved to the system work queue.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Before a link can be reused it must have been cleared. Lowest current
link state is INACTIVE, which does not mean that the link is already
cleared.
Add a new state UNUSED that is set when the link is cleared and can be
reused.
Add helper smc_llc_usable_link() to find an active link in a link group,
and smc_link_usable() to determine if a link is usable.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extend smc_rmb_rtoken_handling() and smc_rtoken_delete() to support
multiple links.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a preparation for the support of multiple links remove the usage of
a static link id (SMC_SINGLE_LINK) and allow dynamic link ids.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As a preparation for the support of multiple links remove the usage of
a static link id (SMC_SINGLE_LINK) and allow dynamic link ids.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The link_id is the index of the link in the array of the link group.
When a link in the array is reused for a new link, a different unique
link_id should be used, otherwise the index in the array could collide
with the previous link at this array position.
Use a new variable link_idx as array index, and make link_id an
increasing unique id value.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the initialization of a new link into its own function, separate
from smc_lgr_create, to allow more than one link per link group.
Do an extra check if the IB device initialization was successful, and
reset the link state if any error occurs during smcr_link_init().
And rename two existing functions to use the prefix smcr_ to indicate
that they belong to the SMC-R code path.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The pnet table stored pnet ids in the smc device structures. When a
device is going down its smc device structure is freed, and when the
device is brought online again it no longer has a pnet id set.
Rework the pnet table implementation to store the device name with their
assigned pnet id and apply the pnet id to devices when they are
registered.
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Reviewed-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 790ab249b55d75fdb427b92f81964cd7cb525eec.
This change needs more work.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no callers in-tree anymore since commit 84287bb32856 ("ila: add
checksum neutral map auto").
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There's no callers in-tree anymore.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The method ndo_start_xmit() returns a value of type netdev_tx_t. Fix
the ndo function to use the correct type.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use the helper function that wraps the calls to platform_get_resource()
and devm_ioremap_resource() together.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds support for reading the optical module eeprom
info via "ethtool -m".
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrii Nakryiko says:
====================
Add necessary infra to build selftests with ASAN (or any other sanitizer). Fix
a bunch of found memory leaks and other memory access issues.
v1->v2:
- don't add ASAN flavor, but allow extra flags for build (Alexei);
- fix few more found issues, which somehow were missed first time.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
With recent changes, runqslower is being copied into selftests/bpf root
directory. So add it into .gitignore.
Fixes: b26d1e2b6028 ("selftests/bpf: Copy runqslower to OUTPUT directory")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Veronika Kabatova <vkabatov@redhat.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-12-andriin@fb.com
|
|
If condition is inverted, but it's also just not necessary.
Fixes: 1c1052e0140a ("tools/testing/selftests/bpf: Add self-tests for new helper bpf_get_ns_current_pid_tgid.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Carlos Neira <cneirabustos@gmail.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-11-andriin@fb.com
|
|
AddressSanitizer assumes that all memory dereferences are done against memory
allocated by sanitizer's malloc()/free() code and not touched by anyone else.
Seems like this doesn't hold for perf buffer memory. Disable instrumentation
on perf buffer callback function.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-10-andriin@fb.com
|
|
BTF object wasn't freed.
Fixes: a6ed02cac690 ("libbpf: Load btf_vmlinux only once per object.")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-9-andriin@fb.com
|
|
Another one found by AddressSanitizer. input_len is bigger than actually
initialized data size.
Fixes: c7566a69695c ("selftests/bpf: Add field existence CO-RE relocs tests")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-8-andriin@fb.com
|
|
getline() allocates string, which has to be freed.
Fixes: 81f77fd0deeb ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.com
|
|
Free test selector substrings, which were strdup()'ed.
Fixes: b65053cd94f4 ("selftests/bpf: Add whitelist/blacklist of test names to test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-6-andriin@fb.com
|
|
Fix memory leak in hashmap_clear() not freeing hashmap_entry structs for each
of the remaining entries. Also NULL-out bucket list to prevent possible
double-free between hashmap__clear() and hashmap__free().
Running test_progs-asan flavor clearly showed this problem.
Reported-by: Alston Tang <alston64@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-5-andriin@fb.com
|
|
Fold stand-alone test_hashmap test into test_progs.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-4-andriin@fb.com
|
|
Add ability to specify extra compiler flags with SAN_CFLAGS for compilation of
all user-space C files. This allows to build all of selftest programs with,
e.g., custom sanitizer flags, without requiring support for such sanitizers
from anyone compiling selftest/bpf.
As an example, to compile everything with AddressSanitizer, one would do:
$ make clean && make SAN_CFLAGS="-fsanitize=address"
For AddressSanitizer to work, one needs appropriate libasan shared library
installed in the system, with version of libasan matching what GCC links
against. E.g., GCC8 needs libasan5, while GCC7 uses libasan4.
For CentOS 7, to build everything successfully one would need to:
$ sudo yum install devtoolset-8-gcc devtoolset-libasan-devel
$ scl enable devtoolset-8 bash # set up environment
For Arch Linux to run selftests, one would need to install gcc-libs package to
get libasan.so.5:
$ sudo pacman -S gcc-libs
N.B. EXTRA_CFLAGS name wasn't used, because it's also used by libbpf's
Makefile and this causes few issues:
1. default "-g -Wall" flags are overriden;
2. compiling shared library with AddressSanitizer generates a bunch of symbols
like: "_GLOBAL__sub_D_00099_0_btf_dump.c", "_GLOBAL__sub_D_00099_0_bpf.c",
etc, which screws up versioned symbols check.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Julia Kartseva <hex@fb.com>
Link: https://lore.kernel.org/bpf/20200429012111.277390-3-andriin@fb.com
|
|
Ensure that test runner flavors include their own skeletons from <flavor>/
directory. Previously, skeletons generated for no-flavor test_progs were used.
Apart from fixing correctness, this also makes it possible to compile only
flavors individually:
$ make clean && make test_progs-no_alu32
... now succeeds ...
Fixes: 74b5a5968fe8 ("selftests/bpf: Replace test_progs and test_maps w/ general rule")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429012111.277390-2-andriin@fb.com
|
|
Andrii Nakryiko says:
====================
This patch set teaches libbpf how to declare and initialize ARRAY_OF_MAPS and
HASH_OF_MAPS maps. See patch #3 for all the details.
Patch #1 refactors parsing BTF definition of map to re-use it cleanly for
inner map definition parsing.
Patch #2 refactors map creation and destruction logic for reuse. It also fixes
existing bug with not closing successfully created maps when bpf_object map
creation overall fails.
Patch #3 adds support for an extension of BTF-defined map syntax, as well as
parsing, recording, and use of relocations to allow declaratively initialize
outer maps with references to inner maps.
v1->v2:
- rename __inner to __array (Alexei).
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
