| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Set a specific source e-switch when setting a rule that matches on the
ingress port.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The source e-switch owner allows a vport on one e-switch port be associated
with a rule defined on the second port e-switch.
The role of the source eswitch owner valid bit in the flow group is to
allow the firmware fail driver attempts to wild card the source eswitch
match field. If this bit is not set, the firmware ignores the source
eswitch owner field totally.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Set a specific destination e-switch when setting a destination vport.
Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
The destination e-switch owner allows a rule in namespace of one e-switch
owner to point to a vport that is natively associated with another
e-switch owner.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When creating FTE, properly distinguish between destination being vport
or tir. The previous code just worked accidentally b/c of both dest being
in the same offset within a union.
Signed-off-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
When merged e-switch is supported, the per-port e-switch is logically
merged into one e-switch that spans both physical ports and all the VFs.
Under merged eswitch, both the matching on source vport and setting
destination vport can have a 2nd attribute which is the vhca id of the
eswitch owner.
For example:
esw0: {match: <src vport=1 owner=0> action: fwd to <dst vport=7, owner=1>}
is a flow set on eswitch0 matching on source vport=1 from his eswitch
and the action being fwd to dest vport=7 of eswitch1.
Signed-off-by: Roi Dayan <roid@mellanox.com>
Reviewed-by: Shahar Klein <shahark@mellanox.com>
Reviewed-by: Or Gerlitz Klein <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
Florian Fainelli says:
====================
net: Allow more drivers with COMPILE_TEST
This patch series includes more drivers to be build tested with COMPILE_TEST
enabled. This helps cover some of the issues I just ran into with missing
a driver *sigh*.
Chanves in v3:
- drop the TI Keystone NETCP driver from the COMPILE_TEST additions
Changes in v2:
- allow FEC to build outside of CONFIG_ARM/ARM64 by defining a layout of
registers, this is not meant to run, so this is not a real issue if we
are not matching the correct register layout
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Those drivers build just fine with COMPILE_TEST, so make that possible.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The Freescale FEC driver builds fine with COMPILE_TEST, so make that
possible.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Most of the TI drivers build just fine with COMPILE_TEST, cpmac (AR7) is
the exception because it uses a header file from
arch/mips/include/asm/mach-ar7/ar7.h and keystone netcp which requires
help from drivers/soc/ti/ for queue management helpers.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add informative messages for error paths related to adding a
VLAN to a device.
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch makes use of build_skb() throughout in driver's receieve
data path [HW gro flow and non HW gro flow]. With this, driver can
build skb directly from the page segments which are already mapped
to the hardware instead of allocating new SKB via netdev_alloc_skb()
and memcpy the data which is quite costly.
This really improves performance (keeping same or slight gain in rx
throughput) in terms of CPU utilization which is significantly reduced
[almost half] in non HW gro flow where for every incoming MTU sized
packet driver had to allocate skb, memcpy headers etc. Additionally
in that flow, it also gets rid of bunch of additional overheads
[eth_get_headlen() etc.] to split headers and data in the skb.
Tested with:
system: 2 sockets, 4 cores per socket, hyperthreading, 2x4x2=16 cores
iperf [server]: iperf -s
iperf [client]: iperf -c <server_ip> -t 500 -i 10 -P 32
HW GRO off – w/o build_skb(), throughput: 36.8 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.59 0.00 32.93 0.00 0.00 43.07 0.00 0.00 23.42
HW GRO off - with build_skb(), throughput: 36.9 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.70 0.00 31.70 0.00 0.00 25.68 0.00 0.00 41.92
HW GRO on - w/o build_skb(), throughput: 36.9 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.86 0.00 24.14 0.00 0.00 6.59 0.00 0.00 68.41
HW GRO on - with build_skb(), throughput: 37.5 Gbits/sec
Average: CPU %usr %nice %sys %iowait %irq %soft %steal %guest %idle
Average: all 0.87 0.00 23.75 0.00 0.00 6.19 0.00 0.00 69.19
Signed-off-by: Ariel Elior <ariel.elior@cavium.com>
Signed-off-by: Manish Chopra <manish.chopra@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Device features may change during transmission. In particular with
corking, a device may toggle scatter-gather in between allocating
and writing to an skb.
Do not unconditionally assume that !NETIF_F_SG at write time implies
that the same held at alloc time and thus the skb has sufficient
tailroom.
This issue predates git history.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
10GbE Intel Wired LAN Driver Updates 2018-05-17
This series contains updates to ixgbe, ixgbevf and ice drivers.
Cathy Zhou resolves sparse warnings by using the force attribute.
Mauro S M Rodrigues fixes a bug where IRQs were not freed if a PCI error
recovery system opts to remove the device which causes
ixgbe_io_error_detected() to return PCI_ERS_RESULT_DISCONNECT before
calling ixgbe_close_suspend() which results in IRQs not freed and
crashing when the remove handler calls pci_disable_device(). Resolved
this by calling ixgbe_close_suspend() before evaluating the PCI channel
state.
Pavel Tatashin releases the rtnl_lock during the call to
ixgbe_close_suspend() to allow scaling if device_shutdown() is
multi-threaded.
Emil modifies ixgbe to not validate the MAC address during a reset,
unless the MAC was set on the host so that the VF will get a new MAC
address every time it reloads. Also updates ixgbevf to set
hw->mac.perm_addr in order to retain the custom MAC on a reset.
Anirudh updates the ice NVM read/erase/update AQ commands to align with
the latest specification.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Petr Machata says:
====================
net: ip6_gre: Fixes in headroom handling
This series mends some problems in headroom management in ip6_gre
module. The current code base has the following three closely-related
problems:
- ip6gretap tunnels neglect to ensure there's enough writable headroom
before pushing GRE headers.
- ip6erspan does this, but assumes that dev->needed_headroom is primed.
But that doesn't happen until ip6_tnl_xmit() is called later. Thus for
the first packet, ip6erspan actually behaves like ip6gretap above.
- ip6erspan shares some of the code with ip6gretap, including
calculations of needed header length. While there is custom
ERSPAN-specific code for calculating the headroom, the computed
values are overwritten by the ip6gretap code.
The first two issues lead to a kernel panic in situations where a packet
is mirrored from a veth device to the device in question. They are
fixed, respectively, in patches #1 and #2, which include the full panic
trace and a reproducer.
The rest of the patchset deals with the last issue. In patches #3 to #6,
several functions are split up into reusable parts. Finally in patch #7
these blocks are used to compose ERSPAN-specific callbacks where
necessary to fix the hlen calculation.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Even though ip6erspan_tap_init() sets up hlen and tun_hlen according to
what ERSPAN needs, it goes ahead to call ip6gre_tnl_link_config() which
overwrites these settings with GRE-specific ones.
Similarly for changelink callbacks, which are handled by
ip6gre_changelink() calls ip6gre_tnl_change() calls
ip6gre_tnl_link_config() as well.
The difference ends up being 12 vs. 20 bytes, and this is generally not
a problem, because a 12-byte request likely ends up allocating more and
the extra 8 bytes are thus available. However correct it is not.
So replace the newlink and changelink callbacks with an ERSPAN-specific
ones, reusing the newly-introduced _common() functions.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract from ip6gre_changelink() a reusable function
ip6gre_changelink_common(). This will allow introduction of
ERSPAN-specific _changelink() function with not a lot of code
duplication.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Extract from ip6gre_newlink() a reusable function
ip6gre_newlink_common(). The ip6gre_tnl_link_config() call needs to be
made customizable for ERSPAN, thus reorder it with calls to
ip6_tnl_change_mtu() and dev_hold(), and extract the whole tail to the
caller, ip6gre_newlink(). Thus enable an ERSPAN-specific _newlink()
function without a lot of duplicity.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Split a reusable function ip6gre_tnl_copy_tnl_parm() from
ip6gre_tnl_change(). This will allow ERSPAN-specific code to
reuse the common parts while customizing the behavior for ERSPAN.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function ip6gre_tnl_link_config() is used for setting up
configuration of both ip6gretap and ip6erspan tunnels. Split the
function into the common part and the route-lookup part. The latter then
takes the calculated header length as an argument. This split will allow
the patches down the line to sneak in a custom header length computation
for the ERSPAN tunnel.
Fixes: 5a963eb61b7c ("ip6_gre: Add ERSPAN native tunnel support")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
dev->needed_headroom is not primed until ip6_tnl_xmit(), so it starts
out zero. Thus the call to skb_cow_head() fails to actually make sure
there's enough headroom to push the ERSPAN headers to. That can lead to
the panic cited below. (Reproducer below that).
Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.
[ 190.703567] kernel BUG at net/core/skbuff.c:104!
[ 190.708384] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 190.714007] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[ 190.728975] CPU: 1 PID: 959 Comm: kworker/1:2 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[ 190.737647] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[ 190.747006] Workqueue: ipv6_addrconf addrconf_dad_work
[ 190.752222] RIP: 0010:skb_panic+0xc3/0x100
[ 190.756358] RSP: 0018:ffff8801d54072f0 EFLAGS: 00010282
[ 190.761629] RAX: 0000000000000085 RBX: ffff8801c1a8ecc0 RCX: 0000000000000000
[ 190.768830] RDX: 0000000000000085 RSI: dffffc0000000000 RDI: ffffed003aa80e54
[ 190.776025] RBP: ffff8801bd1ec5a0 R08: ffffed003aabce19 R09: ffffed003aabce19
[ 190.783226] R10: 0000000000000001 R11: ffffed003aabce18 R12: ffff8801bf695dbe
[ 190.790418] R13: 0000000000000084 R14: 00000000000006c0 R15: ffff8801bf695dc8
[ 190.797621] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[ 190.805786] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 190.811582] CR2: 000055fa929aced0 CR3: 0000000003228004 CR4: 00000000001606e0
[ 190.818790] Call Trace:
[ 190.821264] <IRQ>
[ 190.823314] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[ 190.828940] ? ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[ 190.834562] skb_push+0x78/0x90
[ 190.837749] ip6erspan_tunnel_xmit+0x5e4/0x1982 [ip6_gre]
[ 190.843219] ? ip6gre_tunnel_ioctl+0xd90/0xd90 [ip6_gre]
[ 190.848577] ? debug_check_no_locks_freed+0x210/0x210
[ 190.853679] ? debug_check_no_locks_freed+0x210/0x210
[ 190.858783] ? print_irqtrace_events+0x120/0x120
[ 190.863451] ? sched_clock_cpu+0x18/0x210
[ 190.867496] ? cyc2ns_read_end+0x10/0x10
[ 190.871474] ? skb_network_protocol+0x76/0x200
[ 190.875977] dev_hard_start_xmit+0x137/0x770
[ 190.880317] ? do_raw_spin_trylock+0x6d/0xa0
[ 190.884624] sch_direct_xmit+0x2ef/0x5d0
[ 190.888589] ? pfifo_fast_dequeue+0x3fa/0x670
[ 190.892994] ? pfifo_fast_change_tx_queue_len+0x810/0x810
[ 190.898455] ? __lock_is_held+0xa0/0x160
[ 190.902422] __qdisc_run+0x39e/0xfc0
[ 190.906041] ? _raw_spin_unlock+0x29/0x40
[ 190.910090] ? pfifo_fast_enqueue+0x24b/0x3e0
[ 190.914501] ? sch_direct_xmit+0x5d0/0x5d0
[ 190.918658] ? pfifo_fast_dequeue+0x670/0x670
[ 190.923047] ? __dev_queue_xmit+0x172/0x1770
[ 190.927365] ? preempt_count_sub+0xf/0xd0
[ 190.931421] __dev_queue_xmit+0x410/0x1770
[ 190.935553] ? ___slab_alloc+0x605/0x930
[ 190.939524] ? print_irqtrace_events+0x120/0x120
[ 190.944186] ? memcpy+0x34/0x50
[ 190.947364] ? netdev_pick_tx+0x1c0/0x1c0
[ 190.951428] ? __skb_clone+0x2fd/0x3d0
[ 190.955218] ? __copy_skb_header+0x270/0x270
[ 190.959537] ? rcu_read_lock_sched_held+0x93/0xa0
[ 190.964282] ? kmem_cache_alloc+0x344/0x4d0
[ 190.968520] ? cyc2ns_read_end+0x10/0x10
[ 190.972495] ? skb_clone+0x123/0x230
[ 190.976112] ? skb_split+0x820/0x820
[ 190.979747] ? tcf_mirred+0x554/0x930 [act_mirred]
[ 190.984582] tcf_mirred+0x554/0x930 [act_mirred]
[ 190.989252] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[ 190.996109] ? __lock_acquire+0x706/0x26e0
[ 191.000239] ? sched_clock_cpu+0x18/0x210
[ 191.004294] tcf_action_exec+0xcf/0x2a0
[ 191.008179] tcf_classify+0xfa/0x340
[ 191.011794] __netif_receive_skb_core+0x8e1/0x1c60
[ 191.016630] ? debug_check_no_locks_freed+0x210/0x210
[ 191.021732] ? nf_ingress+0x500/0x500
[ 191.025458] ? process_backlog+0x347/0x4b0
[ 191.029619] ? print_irqtrace_events+0x120/0x120
[ 191.034302] ? lock_acquire+0xd8/0x320
[ 191.038089] ? process_backlog+0x1b6/0x4b0
[ 191.042246] ? process_backlog+0xc2/0x4b0
[ 191.046303] process_backlog+0xc2/0x4b0
[ 191.050189] net_rx_action+0x5cc/0x980
[ 191.053991] ? napi_complete_done+0x2c0/0x2c0
[ 191.058386] ? mark_lock+0x13d/0xb40
[ 191.062001] ? clockevents_program_event+0x6b/0x1d0
[ 191.066922] ? print_irqtrace_events+0x120/0x120
[ 191.071593] ? __lock_is_held+0xa0/0x160
[ 191.075566] __do_softirq+0x1d4/0x9d2
[ 191.079282] ? ip6_finish_output2+0x524/0x1460
[ 191.083771] do_softirq_own_stack+0x2a/0x40
[ 191.087994] </IRQ>
[ 191.090130] do_softirq.part.13+0x38/0x40
[ 191.094178] __local_bh_enable_ip+0x135/0x190
[ 191.098591] ip6_finish_output2+0x54d/0x1460
[ 191.102916] ? ip6_forward_finish+0x2f0/0x2f0
[ 191.107314] ? ip6_mtu+0x3c/0x2c0
[ 191.110674] ? ip6_finish_output+0x2f8/0x650
[ 191.114992] ? ip6_output+0x12a/0x500
[ 191.118696] ip6_output+0x12a/0x500
[ 191.122223] ? ip6_route_dev_notify+0x5b0/0x5b0
[ 191.126807] ? ip6_finish_output+0x650/0x650
[ 191.131120] ? ip6_fragment+0x1a60/0x1a60
[ 191.135182] ? icmp6_dst_alloc+0x26e/0x470
[ 191.139317] mld_sendpack+0x672/0x830
[ 191.143021] ? igmp6_mcf_seq_next+0x2f0/0x2f0
[ 191.147429] ? __local_bh_enable_ip+0x77/0x190
[ 191.151913] ipv6_mc_dad_complete+0x47/0x90
[ 191.156144] addrconf_dad_completed+0x561/0x720
[ 191.160731] ? addrconf_rs_timer+0x3a0/0x3a0
[ 191.165036] ? mark_held_locks+0xc9/0x140
[ 191.169095] ? __local_bh_enable_ip+0x77/0x190
[ 191.173570] ? addrconf_dad_work+0x50d/0xa20
[ 191.177886] ? addrconf_dad_work+0x529/0xa20
[ 191.182194] addrconf_dad_work+0x529/0xa20
[ 191.186342] ? addrconf_dad_completed+0x720/0x720
[ 191.191088] ? __lock_is_held+0xa0/0x160
[ 191.195059] ? process_one_work+0x45d/0xe20
[ 191.199302] ? process_one_work+0x51e/0xe20
[ 191.203531] ? rcu_read_lock_sched_held+0x93/0xa0
[ 191.208279] process_one_work+0x51e/0xe20
[ 191.212340] ? pwq_dec_nr_in_flight+0x200/0x200
[ 191.216912] ? get_lock_stats+0x4b/0xf0
[ 191.220788] ? preempt_count_sub+0xf/0xd0
[ 191.224844] ? worker_thread+0x219/0x860
[ 191.228823] ? do_raw_spin_trylock+0x6d/0xa0
[ 191.233142] worker_thread+0xeb/0x860
[ 191.236848] ? process_one_work+0xe20/0xe20
[ 191.241095] kthread+0x206/0x300
[ 191.244352] ? process_one_work+0xe20/0xe20
[ 191.248587] ? kthread_stop+0x570/0x570
[ 191.252459] ret_from_fork+0x3a/0x50
[ 191.256082] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[ 191.275327] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d54072f0
[ 191.281024] ---[ end trace 7ea51094e099e006 ]---
[ 191.285724] Kernel panic - not syncing: Fatal exception in interrupt
[ 191.292168] Kernel Offset: disabled
[ 191.295697] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Reproducer:
ip link add h1 type veth peer name swp1
ip link add h3 type veth peer name swp3
ip link set dev h1 up
ip address add 192.0.2.1/28 dev h1
ip link add dev vh3 type vrf table 20
ip link set dev h3 master vh3
ip link set dev vh3 up
ip link set dev h3 up
ip link set dev swp3 up
ip address add dev swp3 2001:db8:2::1/64
ip link set dev swp1 up
tc qdisc add dev swp1 clsact
ip link add name gt6 type ip6erspan \
local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
ip link set dev gt6 up
sleep 1
tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
action mirred egress mirror dev gt6
ping -I h1 192.0.2.2
Fixes: e41c7c68ea77 ("ip6erspan: make sure enough headroom at xmit.")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__gre6_xmit() pushes GRE headers before handing over to ip6_tnl_xmit()
for generic IP-in-IP processing. However it doesn't make sure that there
is enough headroom to push the header to. That can lead to the panic
cited below. (Reproducer below that).
Fix by requesting either needed_headroom if already primed, or just the
bare minimum needed for the header otherwise.
[ 158.576725] kernel BUG at net/core/skbuff.c:104!
[ 158.581510] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[ 158.587174] Modules linked in: act_mirred cls_matchall ip6_gre ip6_tunnel tunnel6 gre sch_ingress vrf veth x86_pkg_temp_thermal mlx_platform nfsd e1000e leds_mlxcpld
[ 158.602268] CPU: 1 PID: 16 Comm: ksoftirqd/1 Not tainted 4.17.0-rc4-net_master-custom-139 #10
[ 158.610938] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016
[ 158.620426] RIP: 0010:skb_panic+0xc3/0x100
[ 158.624586] RSP: 0018:ffff8801d3f27110 EFLAGS: 00010286
[ 158.629882] RAX: 0000000000000082 RBX: ffff8801c02cc040 RCX: 0000000000000000
[ 158.637127] RDX: 0000000000000082 RSI: dffffc0000000000 RDI: ffffed003a7e4e18
[ 158.644366] RBP: ffff8801bfec8020 R08: ffffed003aabce19 R09: ffffed003aabce19
[ 158.651574] R10: 000000000000000b R11: ffffed003aabce18 R12: ffff8801c364de66
[ 158.658786] R13: 000000000000002c R14: 00000000000000c0 R15: ffff8801c364de68
[ 158.666007] FS: 0000000000000000(0000) GS:ffff8801d5400000(0000) knlGS:0000000000000000
[ 158.674212] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 158.680036] CR2: 00007f4b3702dcd0 CR3: 0000000003228002 CR4: 00000000001606e0
[ 158.687228] Call Trace:
[ 158.689752] ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[ 158.694475] ? __gre6_xmit+0x246/0xd80 [ip6_gre]
[ 158.699141] skb_push+0x78/0x90
[ 158.702344] __gre6_xmit+0x246/0xd80 [ip6_gre]
[ 158.706872] ip6gre_tunnel_xmit+0x3bc/0x610 [ip6_gre]
[ 158.711992] ? __gre6_xmit+0xd80/0xd80 [ip6_gre]
[ 158.716668] ? debug_check_no_locks_freed+0x210/0x210
[ 158.721761] ? print_irqtrace_events+0x120/0x120
[ 158.726461] ? sched_clock_cpu+0x18/0x210
[ 158.730572] ? sched_clock_cpu+0x18/0x210
[ 158.734692] ? cyc2ns_read_end+0x10/0x10
[ 158.738705] ? skb_network_protocol+0x76/0x200
[ 158.743216] ? netif_skb_features+0x1b2/0x550
[ 158.747648] dev_hard_start_xmit+0x137/0x770
[ 158.752010] sch_direct_xmit+0x2ef/0x5d0
[ 158.755992] ? pfifo_fast_dequeue+0x3fa/0x670
[ 158.760460] ? pfifo_fast_change_tx_queue_len+0x810/0x810
[ 158.765975] ? __lock_is_held+0xa0/0x160
[ 158.770002] __qdisc_run+0x39e/0xfc0
[ 158.773673] ? _raw_spin_unlock+0x29/0x40
[ 158.777781] ? pfifo_fast_enqueue+0x24b/0x3e0
[ 158.782191] ? sch_direct_xmit+0x5d0/0x5d0
[ 158.786372] ? pfifo_fast_dequeue+0x670/0x670
[ 158.790818] ? __dev_queue_xmit+0x172/0x1770
[ 158.795195] ? preempt_count_sub+0xf/0xd0
[ 158.799313] __dev_queue_xmit+0x410/0x1770
[ 158.803512] ? ___slab_alloc+0x605/0x930
[ 158.807525] ? ___slab_alloc+0x605/0x930
[ 158.811540] ? memcpy+0x34/0x50
[ 158.814768] ? netdev_pick_tx+0x1c0/0x1c0
[ 158.818895] ? __skb_clone+0x2fd/0x3d0
[ 158.822712] ? __copy_skb_header+0x270/0x270
[ 158.827079] ? rcu_read_lock_sched_held+0x93/0xa0
[ 158.831903] ? kmem_cache_alloc+0x344/0x4d0
[ 158.836199] ? skb_clone+0x123/0x230
[ 158.839869] ? skb_split+0x820/0x820
[ 158.843521] ? tcf_mirred+0x554/0x930 [act_mirred]
[ 158.848407] tcf_mirred+0x554/0x930 [act_mirred]
[ 158.853104] ? tcf_mirred_act_wants_ingress.part.2+0x10/0x10 [act_mirred]
[ 158.860005] ? __lock_acquire+0x706/0x26e0
[ 158.864162] ? mark_lock+0x13d/0xb40
[ 158.867832] tcf_action_exec+0xcf/0x2a0
[ 158.871736] tcf_classify+0xfa/0x340
[ 158.875402] __netif_receive_skb_core+0x8e1/0x1c60
[ 158.880334] ? nf_ingress+0x500/0x500
[ 158.884059] ? process_backlog+0x347/0x4b0
[ 158.888241] ? lock_acquire+0xd8/0x320
[ 158.892050] ? process_backlog+0x1b6/0x4b0
[ 158.896228] ? process_backlog+0xc2/0x4b0
[ 158.900291] process_backlog+0xc2/0x4b0
[ 158.904210] net_rx_action+0x5cc/0x980
[ 158.908047] ? napi_complete_done+0x2c0/0x2c0
[ 158.912525] ? rcu_read_unlock+0x80/0x80
[ 158.916534] ? __lock_is_held+0x34/0x160
[ 158.920541] __do_softirq+0x1d4/0x9d2
[ 158.924308] ? trace_event_raw_event_irq_handler_exit+0x140/0x140
[ 158.930515] run_ksoftirqd+0x1d/0x40
[ 158.934152] smpboot_thread_fn+0x32b/0x690
[ 158.938299] ? sort_range+0x20/0x20
[ 158.941842] ? preempt_count_sub+0xf/0xd0
[ 158.945940] ? schedule+0x5b/0x140
[ 158.949412] kthread+0x206/0x300
[ 158.952689] ? sort_range+0x20/0x20
[ 158.956249] ? kthread_stop+0x570/0x570
[ 158.960164] ret_from_fork+0x3a/0x50
[ 158.963823] Code: 14 3e ff 8b 4b 78 55 4d 89 f9 41 56 41 55 48 c7 c7 a0 cf db 82 41 54 44 8b 44 24 2c 48 8b 54 24 30 48 8b 74 24 20 e8 16 94 13 ff <0f> 0b 48 c7 c7 60 8e 1f 85 48 83 c4 20 e8 55 ef a6 ff 89 74 24
[ 158.983235] RIP: skb_panic+0xc3/0x100 RSP: ffff8801d3f27110
[ 158.988935] ---[ end trace 5af56ee845aa6cc8 ]---
[ 158.993641] Kernel panic - not syncing: Fatal exception in interrupt
[ 159.000176] Kernel Offset: disabled
[ 159.003767] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
Reproducer:
ip link add h1 type veth peer name swp1
ip link add h3 type veth peer name swp3
ip link set dev h1 up
ip address add 192.0.2.1/28 dev h1
ip link add dev vh3 type vrf table 20
ip link set dev h3 master vh3
ip link set dev vh3 up
ip link set dev h3 up
ip link set dev swp3 up
ip address add dev swp3 2001:db8:2::1/64
ip link set dev swp1 up
tc qdisc add dev swp1 clsact
ip link add name gt6 type ip6gretap \
local 2001:db8:2::1 remote 2001:db8:2::2
ip link set dev gt6 up
sleep 1
tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
action mirred egress mirror dev gt6
ping -I h1 192.0.2.2
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Reported-by: Vlad Buslov <vladbu@mellanox.com>
Reported-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We recently refactored this code and introduced a static checker
warning. Smatch complains that if cmd->index is zero then we would
underflow the arrays. That's obviously true.
The question is whether we prevent cmd->index from being zero at a
different level. I've looked at the code and I don't immediately see
a check for that.
Fixes: 062b3e1b6d4f ("net/ncsi: Refactor MAC, VLAN filters")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzkaller found that following program crashes the host :
{
int fd = socket(AF_SMC, SOCK_STREAM, 0);
int val = 1;
listen(fd, 0);
shutdown(fd, SHUT_RDWR);
setsockopt(fd, 6, TCP_NODELAY, &val, 4);
}
Simply initialize conn.tx_work & conn.send_lock at socket creation,
rather than deeper in the stack.
ODEBUG: assert_init not available (active state 0) object type: timer_list hint: (null)
WARNING: CPU: 1 PID: 13988 at lib/debugobjects.c:329 debug_print_object+0x16a/0x210 lib/debugobjects.c:326
Kernel panic - not syncing: panic_on_warn set ...
CPU: 1 PID: 13988 Comm: syz-executor0 Not tainted 4.17.0-rc4+ #46
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1b9/0x294 lib/dump_stack.c:113
panic+0x22f/0x4de kernel/panic.c:184
__warn.cold.8+0x163/0x1b3 kernel/panic.c:536
report_bug+0x252/0x2d0 lib/bug.c:186
fixup_bug arch/x86/kernel/traps.c:178 [inline]
do_error_trap+0x1de/0x490 arch/x86/kernel/traps.c:296
do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315
invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992
RIP: 0010:debug_print_object+0x16a/0x210 lib/debugobjects.c:326
RSP: 0018:ffff880197a37880 EFLAGS: 00010086
RAX: 0000000000000061 RBX: 0000000000000005 RCX: ffffc90001ed0000
RDX: 0000000000004aaf RSI: ffffffff8160f6f1 RDI: 0000000000000001
RBP: ffff880197a378c0 R08: ffff8801aa7a0080 R09: ffffed003b5e3eb2
R10: ffffed003b5e3eb2 R11: ffff8801daf1f597 R12: 0000000000000001
R13: ffffffff88d96980 R14: ffffffff87fa19a0 R15: ffffffff81666ec0
debug_object_assert_init+0x309/0x500 lib/debugobjects.c:692
debug_timer_assert_init kernel/time/timer.c:724 [inline]
debug_assert_init kernel/time/timer.c:776 [inline]
del_timer+0x74/0x140 kernel/time/timer.c:1198
try_to_grab_pending+0x439/0x9a0 kernel/workqueue.c:1223
mod_delayed_work_on+0x91/0x250 kernel/workqueue.c:1592
mod_delayed_work include/linux/workqueue.h:541 [inline]
smc_setsockopt+0x387/0x6d0 net/smc/af_smc.c:1367
__sys_setsockopt+0x1bd/0x390 net/socket.c:1903
__do_sys_setsockopt net/socket.c:1914 [inline]
__se_sys_setsockopt net/socket.c:1911 [inline]
__x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911
do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x49/0xbe
Fixes: 01d2f7e2cdd3 ("net/smc: sockopts TCP_NODELAY and TCP_CORK")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ursula Braun <ubraun@linux.ibm.com>
Cc: linux-s390@vger.kernel.org
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Don't store repr pointer to reprs array until the representor is
successfully created. This avoids message about "representor
destruction" even when it was never created. Also it cleans-up the flow.
Also, check return value after port alloc.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Antoine Tenart says:
====================
net: mvpp2: small improvements
Those 3 patches are small improvements to the Marvell PPv2 driver. The
series does not conflict with the one sent about phylink and
1000/2500baseX support, so the two series can live in parallel.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prevent flood of RX error prints during heavy traffic with weak signal
in link by checking net_ratelimit() before using netdev_err().
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: small rework, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove special stop/start handling from the set_mac_address callback.
All this special care is not needed, and can be removed. It also
simplifies the up/down status in the driver and helps avoiding possible
link status mismatch issues.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Avoid repeating the check for free aggregated descriptors when it
already failed at the beginning of the function.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled")
forgot to check return value of fopen.
This caused some confusion, when running test_verifier (from
tools/testing/selftests/bpf/) on an older kernel (< v4.4) as it will
simply seqfault.
This fix avoids the segfault and prints an error, but allow program to
continue. Given the sysctl was introduced in 1be7f75d1668 ("bpf:
enable non-root eBPF programs"), we know that the running kernel
cannot support unpriv, thus continue with unpriv_disabled = true.
Fixes: 0a6748740368 ("selftests/bpf: Only run tests if !bpf_disabled")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
Antoine Tenart says:
====================
net: mvpp2: phylink conversion
This series convert the Marvell PPv2 driver to phylink (models the MAC
to PHY link).
One important point is the PPv2 driver supports two probe modes: device
tree and ACPI. This series only brings phylink support for the device
tree mode, as the ACPI one will need further work. Still, the driver
should be working as before when using ACPI. This split should be
temporary, and was discussed with Marcin (in Cc.) who added ACPI support
to the driver.
Also as the SFP cages on both DB boards can be considered as non-wired.
We thus chose not to describe those SFP cages and we use fixed-link.
The rest of the series uses phylink to add support for 1000BaseX and
2500BaseX modes in the PPv2 driver. To do this, two patches are needed
in the common PHY framework (patches 3 and 4). The last 4 patches modify
the device tree to use the new PPv2 functionalities.
The series has been tested for the device tree mode on the 7040-db,
8040-db and 8040-mcbin boards, to ensure all the interface where working
as expected.
@Dave: patches 7 to 10 should go through the mvebu tree (Gregory in
Cc.) to avoid any conflict with the other mvebu dt patches taken during
this cycle.
The series is based on today's net-next.
Since v2:
- Removed the SFP description from the DB boards, as their SFP cages
are wired properly. We now use fixed-link.
- Because of this rework, split the series in two, so that the SFP
part is reviewed separately.
- Small fixes in the phylink patch.
- Rebased on the latest net-next branch.
Since v1:
- Chose a different approach to the SFP changes, as the previous ones
weren't valid and reworked both BD boards device trees.
- Misc fixes.
- Added Kishon's acked-by on one patch.
- Rebaed on latest net-next branch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the 2500Base-X PHY mode support in the Marvell PPv2
driver. 2500Base-X is quite close to 1000Base-X and SGMII modes and uses
nearly the same code path.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the 1000Base-X PHY mode support in the Marvell PPv2
driver. 1000Base-X is quite close the SGMII and uses nearly the same
code path.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch allow the CP110 comphy to configure some lanes in the
2.5G SGMII mode. This mode is quite close to SGMII and uses nearly the
same code path.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds one more generic PHY mode to the phy_mode enum, to allow
configuring generic PHYs to the 2.5G SGMII mode by using the set_mode
callback.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Convert the PPv2 driver to implement phylink helpers, and use phylink in
DT mode. The other mode supported is ACPI, which will need further work
in order to be entirely compatible with phylink.
The MAC and GoP configuration functions were completely moved to fit
into the phylink helpers. When a PHY is always present between the MAC
and the physical port, phylink only is used, but when this is not the
case (the MAC directly is connected to the physical port) the link IRQ
is used to detect changes in the link state and call phylink_mac_change.
The ACPI mode do not uses phylink as of now, and the changes shouldn't
impact its use.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Cosmetic patch to align the ethtool functions to ops definitions. This
patch does not change in any way the driver's behaviour.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.18
The first pull request for 4.18. As usual new features and bug fixes
but nothing really special.
I also merged wireless-drivers due to an iwlwifi patch dependency.
Major changes:
iwlwifi
* implement Traffic Condition Monitor and use it for scan, BT coex and
to detect when the AP doesn't support UAPSD properly
* some more work for the 22000 family of devices;
* introduce AMSDU rate control offload
qtnfmac
* DFS offload support
rsi
* roaming enhancements
* increase max supported aggregation subframes
* don't advertise 5 GHz support if the device doesn't support it
brcmfmac
* add support for BCM4366E chipset
* add support for bcm43364 wireless chipset
ath10k
* enable temperature reads for QCA6174 and QCA9377
* add firmware memory dump support for QCA9984
* continue adding WCN3990 support via SNOC bus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As documented in Documentation/timers/timers-howto.txt,
replace msleep(1) with usleep_range().
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce an new common helper to avoid redundancy.
Signed-off-by: Tonghao Zhang <xiangxia.m.yue@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
ERSPAN only support version 1 and 2. When packets send to an
erspan device which does not have proper version number set,
drop the packet. In real case, we observe multicast packets
sent to the erspan pernet device, erspan0, which does not have
erspan version configured.
Reported-by: Greg Rose <gvrose8192@gmail.com>
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Yuchung Cheng says:
====================
tcp: default RACK loss recovery
This patch set implements the features correspond to the
draft-ietf-tcpm-rack-03 version of the RACK draft.
https://datatracker.ietf.org/meeting/101/materials/slides-101-tcpm-update-on-tcp-rack-00
1. SACK: implement equivalent DUPACK threshold heuristic in RACK to
replace existing RFC6675 recovery (tcp_mark_head_lost).
2. Non-SACK: simplify RFC6582 NewReno implementation
3. RTO: apply RACK's time-based approach to avoid spuriouly
marking very recently sent packets lost.
4. with (1)(2)(3), make RACK the exclusive fast recovery mechanism to
mark losses based on time on S/ACK. Tail loss probe and F-RTO remain
enabled by default as complementary mechanisms to send probes in
CA_Open and CA_Loss states. The probes would solicit S/ACKs to trigger
RACK time-based loss detection.
All Google web and internal servers have been running RACK-only mode
(4) for a while now. a/b experiments indicate RACK/TLP on average
reduces recovery latency by 10% compared to RFC6675. RFC6675
is default-off now but can be enabled by disabling RACK (sysctl
net.ipv4.tcp_recovery=0) for unseen issues.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
An RTO event indicates the head has not been acked for a long time
after its last (re)transmission. But the other packets are not
necessarily lost if they have been only sent recently (for example
due to application limit). This patch would prohibit marking packets
sent within an RTT to be lost on RTO event, using similar logic in
TCP RACK detection.
Normally the head (SND.UNA) would be marked lost since RTO should
fire strictly after the head was sent. An exception is when the
most recent RACK RTT measurement is larger than the (previous)
RTO. To address this exception the head is always marked lost.
Congestion control interaction: since we may not mark every packet
lost, the congestion window may be more than 1 (inflight plus 1).
But only one packet will be retransmitted after RTO, since
tcp_retransmit_timer() calls tcp_retransmit_skb(...,segs=1). The
connection still performs slow start from one packet (with Cubic
congestion control).
This commit was tested in an A/B test with Google web servers,
and showed a reduction of 2% in (spurious) retransmits post
timeout (SlowStartRetrans), and correspondingly reduced DSACKs
(DSACKIgnoredOld) by 7%.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Create and export a new helper tcp_rack_skb_timeout and move tcp_is_rack
to prepare the final RTO change.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously when TCP times out, it first updates cwnd and ssthresh,
marks packets lost, and then updates congestion state again. This
was fine because everything not yet delivered is marked lost,
so the inflight is always 0 and cwnd can be safely set to 1 to
retransmit one packet on timeout.
But the inflight may not always be 0 on timeout if TCP changes to
mark packets lost based on packet sent time. Therefore we must
first mark the packet lost, then set the cwnd based on the
(updated) inflight.
This is not a pure refactor. Congestion control may potentially
break if it uses (not yet updated) inflight to compute ssthresh.
Fortunately all existing congestion control modules does not do that.
Also it changes the inflight when CA_LOSS_EVENT is called, and only
westwood processes such an event but does not use inflight.
This change has two other minor side benefits:
1) consistent with Fast Recovery s.t. the inflight is updated
first before tcp_enter_recovery flips state to CA_Recovery.
2) avoid intertwining loss marking with state update, making the
code more readable.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Refactor using a new helper, tcp_timeout_mark_loss(), that marks packets
lost upon RTO.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The previous approach for the lost and retransmit bits was to
wipe the slate clean: zero all the lost and retransmit bits,
correspondingly zero the lost_out and retrans_out counters, and
then add back the lost bits (and correspondingly increment lost_out).
The new approach is to treat this very much like marking packets
lost in fast recovery. We don’t wipe the slate clean. We just say
that for all packets that were not yet marked sacked or lost, we now
mark them as lost in exactly the same way we do for fast recovery.
This fixes the lost retransmit accounting at RTO time and greatly
simplifies the RTO code by sharing much of the logic with Fast
Recovery.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This is a rewrite of NewReno loss recovery implementation that is
simpler and standalone for readability and better performance by
using less states.
Note that NewReno refers to RFC6582 as a modification to the fast
recovery algorithm. It is used only if the connection does not
support SACK in Linux. It should not to be confused with the Reno
(AIMD) congestion control.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch disables RFC6675 loss detection and make sysctl
net.ipv4.tcp_recovery = 1 controls a binary choice between RACK
(1) or RFC6675 (0).
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
