| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
ssh://gitolite.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull filesystem freezing updates from Darrick Wong:
New code for 6.6:
* Allow the kernel to initiate a freeze of a filesystem. The kernel
and userspace can both hold a freeze on a filesystem at the same
time; the freeze is not lifted until /both/ holders lift it. This
will enable us to fix a longstanding bug in XFS online fsck.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Message-Id: <20230822182604.GB11286@frogsfrogsfrogs>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
It's not necessary to use low-level locking helpers here. Use the
higher-level locking helpers and log if the superblock is dying. Since
the caller is assumed to already hold an active reference it isn't
possible to observe a dying superblock.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recent rework moved block device closing out of sb->put_super() and into
sb->kill_sb() to avoid deadlocks as s_umount is held in put_super() and
blkdev_put() can end up taking s_umount again.
That means we need to move the removal of the superblock from @fs_supers
out of generic_shutdown_super() and into deactivate_locked_super() to
ensure that concurrent mounters don't fail to open block devices that
are still in use because blkdev_put() in sb->kill_sb() hasn't been
called yet.
We can now do this as we can make iterators through @fs_super and
@super_blocks wait without holding s_umount. Concurrent mounts will wait
until a dying superblock is fully dead so until sb->kill_sb() has been
called and SB_DEAD been set. Concurrent iterators can already discard
any SB_DYING superblock.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-4-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Recent patches experiment with making it possible to allocate a new
superblock before opening the relevant block device. Naturally this has
intricate side-effects that we get to learn about while developing this.
Superblock allocators such as sget{_fc}() return with s_umount of the
new superblock held and lock ordering currently requires that block
level locks such as bdev_lock and open_mutex rank above s_umount.
Before aca740cecbe5 ("fs: open block device after superblock creation")
ordering was guaranteed to be correct as block devices were opened prior
to superblock allocation and thus s_umount wasn't held. But now s_umount
must be dropped before opening block devices to avoid locking
violations.
This has consequences. The main one being that iterators over
@super_blocks and @fs_supers that grab a temporary reference to the
superblock can now also grab s_umount before the caller has managed to
open block devices and called fill_super(). So whereas before such
iterators or concurrent mounts would have simply slept on s_umount until
SB_BORN was set or the superblock was discard due to initalization
failure they can now needlessly spin through sget{_fc}().
If the caller is sleeping on bdev_lock or open_mutex one caller waiting
on SB_BORN will always spin somewhere and potentially this can go on for
quite a while.
It should be possible to drop s_umount while allowing iterators to wait
on a nascent superblock to either be born or discarded. This patch
implements a wait_var_event() mechanism allowing iterators to sleep
until they are woken when the superblock is born or discarded.
This also allows us to avoid relooping through @fs_supers and
@super_blocks if a superblock isn't yet born or dying.
Link: aca740cecbe5 ("fs: open block device after superblock creation")
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Make the naming consistent with the earlier introduced
super_lock_{read,write}() helpers.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-2-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the open-coded {down,up}_{read,write}() calls with simple
wrappers. Follow-up patches will benefit from this as well.
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-1-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kill_dirty has always been true for a long time, so hard code it and
remove the unused return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-18-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
get_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-17-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BLKFLSBUF is a historic ioctl that is called on a file handle to a
block device and syncs either the file system mounted on that block
device if there is one, or otherwise the just the data on the block
device.
Replace the get_super based syncing with a holder operation to remove
the last usage of get_super, and to also support syncing the file system
if the block device is not the main block device stored in s_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-16-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Combine the newly merged bdev_mark_dead helper with the existing
mark_dead holder operation so that all operations that invalidate
a device that is dead or being removed now go through the holder
ops. This allows file systems to explicitly shutdown either ASAP
(for a surprise removal) or after writing back data (for an orderly
removal), and do so not only for the main device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-15-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This message isn't exactly helpful, and file systems already print way more
useful messages when shut down while active.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Don't just write out the data, but also invalidate all caches when setting
the device offline. Stop canceling the offlining when writeback fails
as there is no way to recover from that anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
FDFMTBEG is used by fdformat to calibrate before formatting a disk.
Neither the atari nor PC floppy driver sync data, which also seems
a bit pointless for a disk hat is about to get formatted.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
While changing the format of a floppy isn't strictly speaking a media
change, the effects are the same in that the content of the media
changes and the diskseq should be increased and uevent should be
sent. Switch from calling __invalidate_device to
disk_force_media_change to do so.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
nbd_clear_sock_ioctl kills the socket and with that the block
device. Instead of just invalidating file system buffers,
mark the device as dead, which will also invalidate the buffers
as part of the proper shutdown sequence. This also includes
invalidating partitions if there are any.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic fs_holder_ops to shut down the file system when the
log or RT device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the xfs log and RT devices to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230802154131.2221419-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic fs_holder_ops to shut down the file system when the
log device goes away instead of duplicating the logic.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230802154131.2221419-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Just like get_tree_bdev needs to drop s_umount when opening the main
device, we need to do the same for the ext4 log device to avoid a
potential lock order reversal with s_unmount for the mark_dead path.
It might be preferable to just drop s_umount over ->fill_super entirely,
but that will require a fairly massive audit first, so we'll do the easy
version here first.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export fs_holder_ops so that file systems that open additional block
devices can use it as well.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
fs_mark_dead currently uses get_super to find the superblock for the
block device that is going away. This means it is limited to the
main device stored in sb->s_dev, leading to a lot of code duplication
for file systems that can use multiple block devices.
Now that the holder for all block devices used by file systems is set
to the super_block, we can instead look at that holder and then check
if the file system is born and active, so do that instead.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The file system type is not a very useful holder as it doesn't allow us
to go back to the actual file system instance. Pass the super_block instead
which is useful when passed back to the file system driver.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Check for sb->s_type which is the right place to look at the file system
type, not the holder, which is just an implementation detail in the VFS
helpers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use the generic setup_bdev_super helper to open the main block device
and do various bits of superblock setup instead of duplicating the
logic. This includes moving to the new scheme implemented in common
code that only opens the block device after the superblock has allocated.
It does not yet convert nilfs2 to the new mount API, but doing so will
become a bit simpler after this first step.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Message-Id: <20230802154131.2221419-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We'll want to use setup_bdev_super instead of duplicating it in nilfs2.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230802154131.2221419-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently get_tree_bdev and mount_bdev open the block device before
committing to allocating a super block. That creates problems for
restricting the number of writers to a device, and also leads to a
unusual and not very helpful holder (the fs_type).
Reorganize the super block code to first look whether the superblock for
a particular device does already exist and open the block device only if
it doesn't.
[hch: port to before the bdev_handle changes,
duplicate the bdev read-only check from blkdev_get_by_path,
extend the fsfree_mutex coverage to protect against freezes,
fix an open bdev leak when the bdev is frozen,
use the bdev local variable more,
rename the s variable to sb to be more descriptive]
[brauner: remove references to mounts as they're mostly irrelevant]
[brauner & hch: fold fixes for romfs and cramfs for
syzbot+2faac0423fdc9692822b@syzkaller.appspotmail.com]
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230724175145.201318-1-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an ntfs3-specific kill_sb method to do
that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
kill_block_super will call sync_blockdev just a tad later already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-13-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
put_ntfs is a rather unconventional name for a function that frees the
sbi and associated resources. Give it a more descriptive name and drop
the duplicate name in the top of the function comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230809220545.1308228-12-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement an exfat-specific kill_sb method to do
that and share the code with the mount contex free helper for the
mount error handling case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-11-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There are no RCU critical sections for accessing any information in the
sbi, so drop the call_rcu indirection for freeing the sbi.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-10-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the external journal device
into ->kill_sb to archive that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230809220545.1308228-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Copy and paste the commit message from Darrick into a comment to explain
the seemingly odd invalidate_bdev in xfs_shutdown_devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-8-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
blkdev_put must not be called under sb->s_umount to avoid a lock order
reversal with disk->open_mutex. Move closing the buftargs into ->kill_sb
to archive that. Note that the flushing of the disk caches and
block device mapping invalidated needs to stay in ->put_super as the main
block device is closed in kill_block_super already.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-7-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Closing the block devices logically belongs into xfs_free_buftarg, So
instead of open coding it in the caller move it there and add a check
for the s_bdev so that the main device isn't close as that's done by the
VFS helper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-6-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
There isn't much use for this trivial wrapper, especially as the NULL
check is only needed in a single call site.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
As a rule of thumb everything allocated to the fs_context and moved into
the super_block should be freed by ->kill_sb so that the teardown
handling doesn't need to be duplicated between the fill_super error
path and put_super. Implement a XFS-specific kill_sb method to do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
->put_super is only called when sb->s_root is set, and thus when
fill_super succeeds. Thus drop the NULL check that can't happen in
xfs_fs_put_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The xfs_fs_free prototype formatting is a weird mix of the classic XFS
style and the Linux style. Fix it up to be consistent.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Message-Id: <20230809220545.1308228-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Message-Id: <20230807112625.652089-5-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All ocfs2 journal error handling and logging is based on buffer_heads,
and the owning inode and thus super_block can be retrieved through
bh->b_assoc_map->host. Switch to using that to remove the last users
of bdev->bd_super.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Message-Id: <20230807112625.652089-4-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
__ext4_journal_get_write_access already has a super_block available,
and there is no need to go from that to the bdev to go back to the
owning super_block.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-3-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
bdev->bd_super is a somewhat awkward backpointer from a block device to
an owning file system with unclear rules.
For the buffer_head code we already have a good backpointer for the
inode that the buffer_head is associated with, even if it lives on the
block device mapping: b_assoc_map. It is used track dirty buffers
associated with an inode but living on the block device mapping like
directory buffers in ext4.
mark_buffer_write_io_error already uses it for the call to
mapping_set_error, and should be doing the same for the per-sb error
sequence.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230807112625.652089-2-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Jan Kara suggested that when one thread is in the middle of freezing a
filesystem, another thread trying to freeze the same fs but with a
different freeze_holder should wait until the freezer reaches either end
state (UNFROZEN or COMPLETE) instead of returning EBUSY immediately.
Neither caller can do anything sensible with this race other than retry
but they cannot really distinguish EBUSY as in "some other holder of the
same type has the sb already frozen" from "freezing raced with holder of
a different type".
Plumb in the extra code needed to wait for the fs freezer to reach an
end state and try the freeze again.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
Userspace can freeze a filesystem using the FIFREEZE ioctl or by
suspending the block device; this state persists until userspace thaws
the filesystem with the FITHAW ioctl or resuming the block device.
Since commit 18e9e5104fcd ("Introduce freeze_super and thaw_super for
the fsfreeze ioctl") we only allow the first freeze command to succeed.
The kernel may decide that it is necessary to freeze a filesystem for
its own internal purposes, such as suspends in progress, filesystem fsck
activities, or quiescing a device prior to removal. Userspace thaw
commands must never break a kernel freeze, and kernel thaw commands
shouldn't undo userspace's freeze command.
Introduce a couple of freeze holder flags and wire it into the
sb_writers state. One kernel and one userspace freeze are allowed to
coexist at the same time; the filesystem will not thaw until both are
lifted.
I wonder if the f2fs/gfs2 code should be using a kernel freeze here, but
for now we'll use FREEZE_HOLDER_USERSPACE to preserve existing
behaviors.
Cc: mcgrof@kernel.org
Cc: jack@suse.cz
Cc: hch@infradead.org
Cc: ruansy.fnst@fujitsu.com
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Jan Kara <jack@suse.cz>
|
|
|
|
Pull xtensa fixes from Max Filippov:
- fix interaction between unaligned exception handler and load/store
exception handler
- fix parsing ISS network interface specification string
- add comment about etherdev freeing to ISS network driver
* tag 'xtensa-20230716' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: fix unaligned and load/store configuration interaction
xtensa: ISS: fix call to split_if_spec
xtensa: ISS: add comment about etherdev freeing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Fix a lockdep warning when the event given is the first one, no event
group exists yet but the code still goes and iterates over event
siblings
* tag 'perf_urgent_for_v6.5_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86: Fix lockdep warning in for_each_sibling_event() on SPR
|
