summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-27NFC: nfcmrvl: remove unneeded version definesVincent Cuissard2-9/+3
Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add support for proprietary commandsChristophe Ricard6-3/+437
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry as for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Replace st21nfcb by st_nci in makefileChristophe Ricard1-1/+1
Replace 1 missing st21nfcb by st_nci Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: remove duplicated skb dumpChristophe Ricard2-22/+0
Remove SPI_DUMP_SKB and I2C_DUMP_SKB as skb is already dumped in ndlc layer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Disable irq when powering the device upChristophe Ricard2-2/+14
Upon some conditions (timing, CLF errors, platform errors...), the irq might be already active when powering the device. Add irq_active variable as a guard to avoid kernel warning message Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add error messages for unexpected HCI eventsChristophe Ricard3-0/+7
Potentially an unexpected HCI event may occur because of a firmware bug. It could be transparent for the user but we should at least log it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Add few code style fixesChristophe Ricard3-3/+2
Add a minor code style fixes Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add few code style fixesChristophe Ricard3-3/+3
Add some few code style fixes. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add mode parameter to deactivate_target functionsChristophe Ricard10-14/+27
In order to manage in a better way the nci poll mode state machine, add mode parameter to deactivate_target functions. This way we can manage different target state. mode parameter make sense only in nci core. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st21nfca: Fix host_list verification after SEactivationChristophe Ricard1-2/+5
A secure element can be activated in different order. The host_list is updated keeping a fixed order: <terminal_host_id><uicc_id><ese_id>. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Fix host_list verification after SE activationChristophe Ricard1-2/+5
A secure element can be activated in different order. The host_list is updated keeping a fixed order: <terminal_host_id><uicc_id><ese_id>. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Increase delay between 2 secure element activationsChristophe Ricard1-1/+1
After internal discussion, it appears this timing should be increased to 20 ms for interoperability reason. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add ese-present/uicc-present dts propertiesChristophe Ricard10-46/+122
In order to align with st21nfca, dts configuration properties ese_present and uicc_present are made available in st-nci driver. So far, in early development firmware, because nci_nfcee_mode_set(DISABLE) was not supported we had to try to enable it during the secure element discovery phase. After several trials on commercial and qualified firmware it appears that nci_nfcee_mode_set(ENABLE) and nci_nfcee_mode_set(DISABLE) are properly supported. Such feature also help us to eventually save some time (~5ms) when only one secure element is connected. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: netlink: Add missing NFC_ATTR commentsChristophe Ricard1-0/+2
NFC_CMD_ACTIVATE_TARGET and NFC_ATTR_SE_PARAMS comments are missing. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add error messages when an unexpected HCI event occursChristophe Ricard1-0/+6
Potentially an unexpected HCI event may occur because of a firmware bug. It could be transparent for the user but we need to at least log it. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: st-nci: Add support for proprietary commandsChristophe Ricard6-10/+619
Add support for proprietary commands useful mainly for factory testings. Here is a list: - FACTORY_MODE: Allow to set the driver into a mode where no secure element are activated. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_CLEAR_ALL_PIPES: Allow to execute a HCI clear all pipes command. It does not consider any NFC_ATTR_VENDOR_DATA. - HCI_DM_PUT_DATA: Allow to configure specific CLF registry like for example RF trimmings or low level drivers configurations (I2C, SPI, SWP). - HCI_DM_UPDATE_AID: Allow to configure an AID routing into the CLF routing table following RF technology, CLF mode or protocol. - HCI_DM_GET_INFO: Allow to retrieve CLF information. - HCI_DM_GET_DATA: Allow to retrieve CLF configurable data such as low level drivers configurations or RF trimmings. - HCI_DM_DIRECT_LOAD: Allow to load a firmware into the CLF. A complete packet can be more than 8KB. - HCI_DM_RESET: Allow to run a CLF reset in order to "commit" CLF configuration changes without CLF power off. - HCI_GET_PARAM: Allow to retrieve an HCI CLF parameter (for example the white list). - HCI_DM_FIELD_GENERATOR: Allow to generate different kind of RF technology. When using this command to anti-collision is done. - HCI_LOOPBACK: Allow to echo a command and test the Dh to CLF connectivity. - HCI_DM_VDC_MEASUREMENT_VALUE: Allow to measure the field applied on the CLF antenna. A value between 0 and 0x0f is returned. 0 is maximum. - HCI_DM_FWUPD_START: Allow to put CLF into firmware update mode. It is a specific CLF command as there is no GPIO for this. - HCI_DM_FWUPD_END: Allow to complete firmware update. - HCI_DM_VDC_VALUE_COMPARISON: Allow to compare the field applied on the CLF antenna to a reference value. - MANUFACTURER_SPECIFIC: Allow to retrieve manufacturer specific data received during a NCI_CORE_INIT_CMD. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27Merge branch 'sh_eth-fixes'David S. Miller1-7/+7
Sergei Shtylyov says: ==================== sh_eth: RX buffer alignment fixes Here's a set of 2 patches against DaveM's 'net.git' repo which are the fixes to the RX buffer size calculation. [1/2] sh_eth: fix RX buffer size alignment [2/2] sh_eth: fix RX buffer size calculation ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27sh_eth: fix RX buffer size calculationSergei Shtylyov1-2/+2
The RX buffer size calulation failed to account for the length granularity (which is now 32 bytes)... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27sh_eth: fix RX buffer size alignmentSergei Shtylyov1-5/+5
Both Renesas R-Car and RZ/A1 manuals state that RX buffer length must be a multiple of 32 bytes, while the driver only uses 16 byte granularity... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: dsa: bcm_sf2: Unhardcode port numbersFlorian Fainelli2-11/+97
While the current driver mostly supports BCM7445 which has a hardcoded location for its MoCA port on port 7 and port 0 for its internal PHY, this is not necessarily true for all other chips out there such as BCM3390 for instance. Walk the list of ports from Device Tree, get their port number ("reg" property), and then parse the "phy-mode" property and initialize two internal variables: moca_port and a bitmask of internal PHYs. Since we use interrupts for the MoCA port, we introduce two helper functions to enable/disable interrupts and do this at the appropriate bank (INTRL2_0 or INTRL2_1). Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: dsa: bcm_sf2: Implement FDB operationsFlorian Fainelli3-0/+335
Add support for the FDB add, delete, and dump operations. The add and delete operations are implemented using directed ARL operations using the specified MAC address and consist in a read operation, write and readback operation. The dump operation consists in using the ARL search and software filtering entries which are not for the desired port. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27Input: alps - only the Dell Latitude D420/430/620/630 have separate stick ↵Hans de Goede1-6/+42
button bits commit 92bac83dd79e ("Input: alps - non interleaved V2 dualpoint has separate stick button bits") assumes that all alps v2 non-interleaved dual point setups have the separate stick button bits. Later we limited this to Dell laptops only because of reports that this broke things on non Dell laptops. Now it turns out that this breaks things on the Dell Latitude D600 too. So it seems that only the Dell Latitude D420/430/620/630, which all share the same touchpad / stick combo, have these separate bits. This patch limits the checking of the separate bits to only these models fixing regressions with other models. Reported-and-tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable@vger.kernel.org Tested-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-By: Pali Rohár <pali.rohar@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-10-27Merge tag 'iommu-fixes-v4.3-rc7' of ↵Linus Torvalds3-2/+10
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Two late fixes for the AMD IOMMU driver: - add an additional check to the io page-fault handler to avoid a BUG_ON being hit in handle_mm_fault() - fix a problem with devices writing to the system management area and were blocked by the IOMMU because the driver wrongly cleared out the DTE flags allowing that access" * tag 'iommu-fixes-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Don't clear DTE flags when modifying it iommu/amd: Fix BUG when faulting a PROT_NONE VMA
2015-10-27Merge tag 'md/4.3-rc6-fixes' of git://neil.brown.name/mdLinus Torvalds2-11/+41
Pull md fixes from Neil Brown: "Some raid1/raid10 fixes. I meant to get this to you before -rc7, but what with all the travel plans.. Two fixes for bugs that are in both raid1 and raid10. Both related to bad-block-lists and at least one needs to be back ported to 3.1. Also a revision for the "new" layout in raid10. This "new" code (which aims to improve robustness) actually reduces robustness in some cases. It probably isn't in use at all as not public user-space code makes use of these new layouts. However just in case someone has their own code, it would be good to get the WARNing out for them sooner" * tag 'md/4.3-rc6-fixes' of git://neil.brown.name/md: md/raid10: fix the 'new' raid10 layout to work correctly. md/raid10: don't clear bitmap bit when bad-block-list write fails. md/raid1: don't clear bitmap bit when bad-block-list write fails. md/raid10: submit_bio_wait() returns 0 on success md/raid1: submit_bio_wait() returns 0 on success
2015-10-27Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-32/+48
Pull drm fixes from Dave Airlie: "Last fixes from me: one amdgpu/radeon suspend resume and one leak fix, along with one vmware fix for some issues when command submission fails" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/amdgpu: don't try to recreate sysfs entries on resume drm/radeon: don't try to recreate sysfs entries on resume drm/amdgpu: stop leaking page flip fence drm/vmwgfx: Stabilize the command buffer submission code
2015-10-26rtl8xxxu: fix unused rtl8192cu_fops compiler warningKalle Valo1-0/+16
kbuild reported: rtl8xxxu.c:5786:32: warning: ‘rtl8192cu_fops’ defined but not used [-Wunused-variable] Fix it by adding temporary ifdefs around the static functions. Fixes: 033695bdf6d7 ("rtl8xxxu: move devices supported by rtlwifi under UNTESTED config") Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-10-26arcnet: add netif_carrier_on/off for reconnectMichael Grzeschik2-0/+27
The arcnet device has no interrupt to detect if the link has changed from disconnected to connected. This patch adds an timer to toggle the link detection. The timer will get retriggered as long as the reconnection interrupts accure. If the recon interrupts hold off for >1s we define the connection stable again. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26arcnet: com20020-pci: add led trigger supportMichael Grzeschik5-0/+181
The EAE PLX-PCI card has special leds on the the main io pci resource bar. This patch adds support to trigger the conflict and data leds with the packages. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26arcnet: com20020-pci: add rotary index supportMichael Grzeschik2-0/+37
The EAE PLX-PCI card has a special rotary encoder to configure the address of every card individually. We take this information for the initial setup of the cards dev_id. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26arcnet: com20020-pci: set dev_port to the subdevice indexMichael Grzeschik1-0/+1
This patch sets the dev_port according to the index of the card. This can be used by udev to name the ports in userspace. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26arcnet: com20020: add enable and disable device on open/closeMichael Grzeschik1-10/+29
This patch changes the driver to properly work with the linux netif interface. The controller gets enabled on open and disabled on close. Therefor it removes every bogus start of the xceiver. It only gets enabled on com20020_open and disabled on com20020_close. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26arcnet: move dev_free_skb to its only userMichael Grzeschik1-8/+2
The call for dev_free_skb is done only once. This patch moves its call to its only user and removes the obsolete condition variable. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
2015-10-26Bluetooth: Fix some obvious coding style issues in the SCO moduleMarcel Holtmann1-11/+19
Lets fix this obvious coding style issues in the SCO module and bring it in line with the rest of the Bluetooth subsystem. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Replace hci_notify with hci_sock_dev_eventMarcel Holtmann1-16/+9
There is no point in wrapping hci_sock_dev_event around hci_notify. It is an empty wrapper which adds no value. So remove it. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Rename bt_cb()->req into bt_cb()->hciMarcel Holtmann5-24/+24
The SKB context buffer for HCI request is really not just for requests, information in their are preserved for the whole HCI layer. So it makes more sense to actually rename it into bt_cb()->hci and also call it then struct hci_ctrl. In addition that allows moving the decoded opcode for outgoing packets into that struct. So far it was just consuming valuable space from the main shared items. And opcode are not valid for L2CAP packets. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26Bluetooth: Remove unneeded parenthesis around MSG_OOBMarcel Holtmann2-2/+2
There are two checks that are still using (MSG_OOB) instead of just MSG_OOB and so lets just fix them. Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
2015-10-26NFC: st21nfca: Fix st21nfca_gates offsetChristophe Ricard1-3/+4
It is useless to start from index 0 when looking for a gate because only dynamic pipes are retrieved with ST21NFCA_DM_GETINFO(ST21NFCA_DM_GETINFO_PIPE_LIST). The first dynamic pipe is present at index 3. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Fix st_nci_gates offsetChristophe Ricard1-1/+1
It is useless to start from index 0 when looking for a gate because only dynamic pipes are retrieved with ST_NCI_DM_GETINFO(ST_NCI_DM_GETINFO_PIPE_LIST). The first dynamic pipe is present at index 3. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Add support for NCI_HCI_IDENTITY_MGMT_GATEChristophe Ricard2-0/+4
NCI_HCI_IDENTITY_MGMT_GATE might be useful to get information about hardware or firmware version. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: initialize gate_count in st_nci_hci_network_initChristophe Ricard1-0/+1
When initializing ndev->hci_dev->init_data, only gates field was set. gate_count needs to be initialized as well. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st21nfca: Keep st21nfca_gates unchanged in load_sessionChristophe Ricard1-6/+6
We need to keep initial st_nci_gates values in order for nfc_hci_dev_connect_gates to create and open pipe when necessary. For example after a firmware update CLF pipes are cleared. Changing pipe values in st21nfca_gates was causing nfc_hci_dev_connect_gates not using accurate pipes value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Keep st_nci_gates unchanged in load_sessionChristophe Ricard1-4/+4
We need to keep initial st_nci_gates values in order for nci_hci_dev_connect_gates to create and open pipe when necessary. For example after a firmware update CLF pipes are cleared. Changing pipe values in st_nci_gates was causing nci_hci_dev_connect_gates not using accurate pipes value. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st21nfca: Open NFC_HCI_LINK_MGMT_PIPEChristophe Ricard1-14/+5
NFC_HCI_LINK_MGMT_PIPE was never opened in nfc_hci_load_session. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Open NCI_HCI_LINK_MGMT_PIPEChristophe Ricard1-0/+8
NCI_HCI_LINK_MGMT_PIPE was never opened in st_nci_hci_load_session. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st21nfca: Remove HCI gates initialization in load_sessionChristophe Ricard1-1/+0
hdev->init_data.gates is already initialized in st21nfca_hci_probe. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: st-nci: Remove HCI init_data.gates initialization in load_sessionChristophe Ricard1-3/+0
ndev->hci_dev->init_data.gates is already initialized in st_nci_hci_network. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Create pipe on specific gate in nci_hci_connect_gateChristophe Ricard1-1/+55
Some gates might need to have their pipes explicitly created. Add a call to nci_hci_create_pipe in nci_hci_connect_gate for every gate that is different than NCI_HCI_LINK_MGMT_GATE or NCI_HCI_ADMIN_GATE. In case of an error when opening a pipe, like in hci layer, delete the pipe if it was created. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: Call nci_hci_clear_all_pipes at HCI initial activation.Christophe Ricard1-0/+4
When session_id is filled to 0xff, the pipe configuration is probably incorrect and needs to be cleared. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: add nci_hci_clear_all_pipes functionsChristophe Ricard2-0/+16
nci_hci_clear_all_pipes might be use full in some cases for example after a firmware update. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-26NFC: nci: extract pipe value using NCI_HCP_MSG_GET_PIPEChristophe Ricard1-2/+2
When receiving data in nci_hci_msg_rx_work, extract pipe value using NCI_HCP_MSG_GET_PIPE macro. Cc: stable@vger.kernel.org Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 01:47:18 +0300