summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-28bpf: sample: define aarch64 specific registersYang Shi1-0/+12
Define aarch64 specific registers for building bpf samples correctly. Signed-off-by: Yang Shi <yang.shi@linaro.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28amd-xgbe: Fix race between access of desc and desc indexLendacky, Thomas2-1/+5
During Tx cleanup it's still possible for the descriptor data to be read ahead of the descriptor index. A memory barrier is required between the read of the descriptor index and the start of the Tx cleanup loop. This allows a change to a lighter-weight barrier in the Tx transmit routine just before updating the current descriptor index. Since the memory barrier does result in extra overhead on arm64, keep the previous change to not chase the current descriptor value. This prevents the execution of the barrier for each loop performed. Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28RDS-TCP: Recover correctly from pskb_pull()/pksb_trim() failure in ↵Sowmini Varadhan1-2/+9
rds_tcp_data_recv Either of pskb_pull() or pskb_trim() may fail under low memory conditions. If rds_tcp_data_recv() ignores such failures, the application will receive corrupted data because the skb has not been correctly carved to the RDS datagram size. Avoid this by handling pskb_pull/pskb_trim failure in the same manner as the skb_clone failure: bail out of rds_tcp_data_recv(), and retry via the deferred call to rds_send_worker() that gets set up on ENOMEM from rds_tcp_read_sock() Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28forcedeth: fix unilateral interrupt disabling in netpoll pathNeil Horman1-13/+11
Forcedeth currently uses disable_irq_lockdep and enable_irq_lockdep, which in some configurations simply calls local_irq_disable. This causes errant warnings in the netpoll path as in netpoll_send_skb_on_dev, where we disable irqs using local_irq_save, leading to the following warning: WARNING: at net/core/netpoll.c:352 netpoll_send_skb_on_dev+0x243/0x250() (Not tainted) Hardware name: netpoll_send_skb_on_dev(): eth0 enabled interrupts in poll (nv_start_xmit_optimized+0x0/0x860 [forcedeth]) Modules linked in: netconsole(+) configfs ipv6 iptable_filter ip_tables ppdev parport_pc parport sg microcode serio_raw edac_core edac_mce_amd k8temp snd_hda_codec_realtek snd_hda_codec_generic forcedeth snd_hda_intel snd_hda_codec snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore snd_page_alloc i2c_nforce2 i2c_core shpchp ext4 jbd2 mbcache sr_mod cdrom sd_mod crc_t10dif pata_amd ata_generic pata_acpi sata_nv dm_mirror dm_region_hash dm_log dm_mod [last unloaded: scsi_wait_scan] Pid: 1940, comm: modprobe Not tainted 2.6.32-573.7.1.el6.x86_64.debug #1 Call Trace: [<ffffffff8107bbc1>] ? warn_slowpath_common+0x91/0xe0 [<ffffffff8107bcc6>] ? warn_slowpath_fmt+0x46/0x60 [<ffffffffa00fe5b0>] ? nv_start_xmit_optimized+0x0/0x860 [forcedeth] [<ffffffff814b3593>] ? netpoll_send_skb_on_dev+0x243/0x250 [<ffffffff814b37c9>] ? netpoll_send_udp+0x229/0x270 [<ffffffffa02e3299>] ? write_msg+0x39/0x110 [netconsole] [<ffffffffa02e331b>] ? write_msg+0xbb/0x110 [netconsole] [<ffffffff8107bd55>] ? __call_console_drivers+0x75/0x90 [<ffffffff8107bdba>] ? _call_console_drivers+0x4a/0x80 [<ffffffff8107c445>] ? release_console_sem+0xe5/0x250 [<ffffffff8107d200>] ? register_console+0x190/0x3e0 [<ffffffffa02e71a6>] ? init_netconsole+0x1a6/0x216 [netconsole] [<ffffffffa02e7000>] ? init_netconsole+0x0/0x216 [netconsole] [<ffffffff810020d0>] ? do_one_initcall+0xc0/0x280 [<ffffffff810d4933>] ? sys_init_module+0xe3/0x260 [<ffffffff8100b0d2>] ? system_call_fastpath+0x16/0x1b ---[ end trace f349c7af88e6a6d5 ]--- console [netcon0] enabled netconsole: network logging started Fix it by modifying the forcedeth code to use disable_irq_nosync_lockdep_irqsavedisable_irq_nosync_lockdep_irqsave instead, which saves and restores irq state properly. This also saves us a little code in the process Tested by the reporter, with successful restuls Patch applies to the head of the net tree Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: "David S. Miller" <davem@davemloft.net> Reported-by: Vasily Averin <vvs@sw.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28sfc: replace spinlocks with bit ops for busy poll lockingBert Kenward2-75/+58
This patch reduces the overhead of locking for busy poll. Previously the state was protected by a lock, whereas now it's manipulated solely with atomic operations. Signed-off-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28sock: don't enable netstamp for af_unix socketsHannes Frederic Sowa1-3/+17
netstamp_needed is toggled for all socket families if they request timestamping. But some protocols don't need the lower-layer timestamping code at all. This patch starts disabling it for af-unix. E.g. systemd enables timestamping during boot-up on the journald af-unix sockets, thus causing the system to globally enable timestamping in the lower networking stack. Still, it is very probable that timestamping gets activated, by e.g. dhclient or various NTP implementations. Reported-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28Merge branch 'qed-driver'David S. Miller34-0/+24086
Ariel Elior says: ==================== Add new drivers: qed & qede This series implements the driver set for Qlogic's new QL4xxx series. These are 10/20/25/40/50/100 Gig capable converged nics, supporting ethernet (obviously), iscsi, fcoe, roce and iwarp protocols. The overall driver design includes a common module ('qed') and protocol specific dependent modules for ethernet ('qede'), fcoe ('qedf'), iscsi ('qedi') and roce ('qedr'). The common module contains all of the common logic, e.g. initialization, cleanup, infrastructure for interrupt handling, link management, slowpath etc. as well as protocol agnostic features, and supplying an abstraction layer for other modules. The protocol specific modules can be compiled and operated independently of each other, with the exception of the rdma modules which are dependent on the ethernet module, in accordance with the kernel rdma stack design. This series only adds the core and ethernet modules, with basic L2 capabilities. Future series will add the rest of the modules and enhance the L2 functionality. Ths patch series is constructed of the following patches: qed: Add module with basic common support qed: Add basic L2 interface qede: Add basic Network driver qed: Add slowpath L2 support qede: Add basic network device support qede: Add classification configuration qed: Add link support qede: Add support for link qed: Add statistics support qede: Add basic ethtool support This project is a team effort, thanks go to Yuval Mintz, Dmitry Kravkov, Michal Kalderon, Tomer Tayar, Manish Chopra, Sudarsana Kalluru, Rajesh Borundia, Sony Chacko, Artum Zolotushko, Harish Patil, Rasesh Mody, Sergey Ukhterov and Elad Manela, as well as former team members, Eilon Greenstein and Shmulik Ravid. Changes from previos version: ----------------------------- From Version 7: - Various small fixes according to Dave's suggestions; Largest change [code-wise] - don't use tabs for indenting function arguments. From Version 6: - Reduced the number of arguments for functions with exceptionally high number of parameters. From Version 5: - Style change and fixes [mostly in 1, 4 and 7]. Thanks go to Francois Romieu, a mere mortal. ;-) From Version 4: - Drop dependency for x86_64. From Version 3: - Limit support of initial submission to x86_64. - Fix endian problems appearing via sparse [although no BE support yet]. - Fix small issues suggested by the kbuild test robot. From Version 2: - Removed U64_{HI,LO}; Using {upper,lower}_32_bits instead. - Use regular napi weight definition. - [We still use the __le variants for variables, since we didn't get a reply regarding the change into non-user API types]. From Version 1: - Removed private license file; Instead revised comments at source headers. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic ethtool supportSudarsana Kalluru4-2/+596
This adds basic ethtool operations to the qed driver, allowing support in: - Statistics gathering [ethtool -S] - Setting of debug level [ethtool -s <interface> msglvl] - Getting basic information [ethtool, ethtool -i] In addition it adds the ability to change the MTU. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qed: Add statistics supportManish Chopra6-1/+296
Device statistics can be gathered on-demand. This adds the qed support for reading the statistics [both function and port] from the device, and adds to the public API a method for requesting the current statistics. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add support for linkSudarsana Kalluru1-0/+47
This adds basic link functionality to qede - driver still doesn't provide users with an API to change any link property, but it does request qed to initialize the link using default configuration, and registers a callback that allows it to get link notifications. This patch adds the ability of the driver to set the carrier as active and to enable traffic as a result of async. link notifications. Following this patch, driver should be capable of running traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qed: Add link supportYuval Mintz8-5/+1102
Physical link is handled by the management Firmware. This patch lays the infrastructure for attention handling in the driver, as link change notifications arrive via async. attentions, as well the handling of such notifications. This patch also extends the API with the protocol drivers by adding registered callbacks which the protocol driver passes to qed in order to be notified of async. events originating from the FW/HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: classification configurationSudarsana Kalluru2-0/+251
Add the ability to configure basic classification in driver by implementing ndo_set_mac_address() and ndo_set_rx_mode(). Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic network device supportYuval Mintz2-0/+1935
This patch includes the basic Rx/Tx support for the driver [although carrier will still never be turned on]. Following this patch the driver registers a network device, initializes it and prepares it for traffic. Signed-off-by: Sudarsana Kalluru <Sudarsana.Kalluru@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qed: Add slowpath L2 supportManish Chopra10-0/+2286
This patch adds to the qed the support to configure various L2 elements, such as channels and basic filtering conditions. It also enhances its public API to allow qede to later utilize this functionality. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qede: Add basic Network driverYuval Mintz5-0/+436
The Qlogic Everest Driver for Ethernet is the Ethernet specific module for QL4xxx ethernet products by Qlogic. This patch adds a very minimal PCI driver, one that doesn't yet register a network device, but one that does interact with qed and does a basic initialization of the HW. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qed: Add basic L2 interfaceYuval Mintz7-1/+482
This patch adds a public API for a network driver to work on top of QED. The interface itself is very minimal - it's mostly infrastructure, as the only content it has after this patch is a query for HW-based information required for the creation of a network interface [I.e., no actual protocol-specific configurations are supported]. Signed-off-by: Manish Chopra <Manish.Chopra@qlogic.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28qed: Add module with basic common supportYuval Mintz27-0/+16664
The Qlogic Everest Driver is the backend module for the QL4xxx ethernet products by Qlogic. This module serves two main purposes: 1. It's responsible to contain all the common code that will be shared between the various drivers that would be used with said line of products. Flows such as chip initialization and de-initialization fall under this category. 2. It would abstract the protocol-specific HW & FW components, allowing the protocol drivers to have a clean APIs which is detached in its slowpath configuration from the actual HSI. This adds a very basic module without any protocol-specific bits. I.e., this adds a basic implementation that almost entirely falls under the first category. Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: Ariel Elior <Ariel.Elior@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28openvswitch: Fix skb leak using IPv6 defragJoe Stringer1-0/+7
nf_ct_frag6_gather() makes a clone of each skb passed to it, and if the reassembly is successful, expects the caller to free all of the original skbs using nf_ct_frag6_consume_orig(). This call was previously missing, meaning that the original fragments were never freed (with the exception of the last fragment to arrive). Fix this by ensuring that all original fragments except for the last fragment are freed via nf_ct_frag6_consume_orig(). The last fragment will be morphed into the head, so it must not be freed yet. Furthermore, retain the ->next pointer for the head after skb_morph(). Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28ipv6: Export nf_ct_frag6_consume_orig()Joe Stringer1-0/+1
This is needed in openvswitch to fix an skb leak in the next patch. Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28openvswitch: Fix double-free on ip_defrag() errorsJoe Stringer3-6/+16
If ip_defrag() returns an error other than -EINPROGRESS, then the skb is freed. When handle_fragments() passes this back up to do_execute_actions(), it will be freed again. Prevent this double free by never freeing the skb in do_execute_actions() for errors returned by ovs_ct_execute. Always free it in ovs_ct_execute() error paths instead. Fixes: 7f8a436eaa2c ("openvswitch: Add conntrack action") Reported-by: Florian Westphal <fw@strlen.de> Signed-off-by: Joe Stringer <joestringer@nicira.com> Acked-by: Pravin B Shelar <pshelar@nicira.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28fib_trie: leaf_walk_rcu should not compute key if key is less than pn->keyAlexander Duyck1-1/+1
We were computing the child index in cases where the key value we were looking for was actually less than the base key of the tnode. As a result we were getting incorrect index values that would cause us to skip over some children. To fix this I have added a test that will force us to use child index 0 if the key we are looking for is less than the key of the current tnode. Fixes: 8be33e955cb9 ("fib_trie: Fib walk rcu should take a tnode and key instead of a trie and a leaf") Reported-by: Brian Rak <brak@gameservers.com> Signed-off-by: Alexander Duyck <aduyck@mirantis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-28block: re-add discard_granularity and alignment checksMing Lin1-9/+22
In commit b49a087("block: remove split code in blkdev_issue_{discard,write_same}"), discard_granularity and alignment checks were removed. Ideally, with bio late splitting, the upper layers shouldn't need to depend on device's limits. Christoph reported a discard regression on the HGST Ultrastar SN100 NVMe device when mkfs.xfs. We have not found the root cause yet. This patch re-adds discard_granularity and alignment checks by reverting the related changes in commit b49a087. The good thing is now we can remove the 2G discard size cap and just use UINT_MAX to avoid bi_size overflow. Reviewed-by: Christoph Hellwig <hch@lst.de> Tested-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-28Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds3-5/+16
Pull ARM fixes from Russell King: "Two fixes for ARM and one for clkdev: - Fix another build issue with vdsomunge on non-glibc systems - Fix a randconfig build error caused by an invalid configuration - Fix a clkdev problem causing the Nokia n700 to no longer boot" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: clkdev: fix clk_add_alias() with a NULL alias device name ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h ARM: make RiscPC depend on MMU
2015-10-28Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds1-2/+2
Pull blkcg fix from Jens Axboe: "One final fix that should go into 4.3. It's a simple 2x1 liner, fixing a blkcg accounting issue. It was using the wrong bio member to look at the sync and write bits..." * 'for-linus' of git://git.kernel.dk/linux-block: blkcg: fix incorrect read/write sync/async stat accounting
2015-10-28Merge branch 'linus' of ↵Linus Torvalds4-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fix from Herbert Xu: "This fixes a problem in the Crypto API that may cause spurious errors when signals are received by the process that made the orignal system call into the kernel" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: api - Only abort operations on fatal signal
2015-10-28Merge tag 'fixes-for-linus' of ↵Linus Torvalds1-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull module preemption fix from Rusty Russell: "Turns out we should have always been disabling preemption here; someone finally caught it thanks to Peter Z's additional checks" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: module: Fix locking in symbol_put_addr()
2015-10-27bluetooth: 6lowpan: fix NOHZ: local_softirq_pendingAlexander Aring1-1/+1
Jukka reported about the following warning: "NOHZ: local_softirq_pending 08" I remember this warning and we had a similar issue when using workqueues and calling netif_rx. See commit 5ff3fec ("mac802154: fix NOHZ local_softirq_pending 08 warning"). This warning occurs when calling "netif_rx" inside the wrong context (non softirq context). The net core api offers "netif_rx_ni" to call netif_rx inside the correct softirq context. Reported-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Alexander Aring <alex.aring@gmail.com> Acked-by: Jukka Rissanen <jukka.rissanen@linux.intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-27blkcg: fix incorrect read/write sync/async stat accountingTejun Heo1-2/+2
While unifying how blkcg stats are collected, 77ea733884eb ("blkcg: move io_service_bytes and io_serviced stats into blkcg_gq") incorrectly used bio->flags instead of bio->rw to tell the IO type. This made IOs to be accounted as the wrong type. Fix it. Signed-off-by: Tejun Heo <tj@kernel.org> Fixes: 77ea733884eb ("blkcg: move io_service_bytes and io_serviced stats into blkcg_gq") Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-27net: tso: add support for IPv6emmanuel.grumbach@intel.com2-5/+14
Adding IPv6 for the TSO helper API is trivial: * Don't play with the id (which doesn't exist in IPv6) * Correctly update the payload_len (don't include the length of the IP header itself) Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27Merge tag 'arcnet-for-4.4-rc1' of git://git.pengutronix.de/git/mgr/linuxDavid S. Miller6-18/+277
Michael Grzeschik says: ==================== This series includes code simplifaction. The main changes are the correct xceiver handling (enable/disable) of the com20020 cards. The driver now handles link status change detection. The EAE PCI-ARCNET cards now make use of the rotary encoded subdevice indexing and got support for led triggers on transmit and reconnection events. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27Merge branch 'net_of_node_put'David S. Miller6-4/+16
Julia Lawall says: ==================== add missing of_node_put The various for_each device_node iterators performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. The complete semantic patch that fixes this problem is (http://coccinelle.lip6.fr): // <smpl> @r@ local idexpression n; expression e1,e2; iterator name for_each_node_by_name, for_each_node_by_type, for_each_compatible_node, for_each_matching_node, for_each_matching_node_and_match, for_each_child_of_node, for_each_available_child_of_node, for_each_node_with_property; iterator i; statement S; expression list [n1] es; @@ ( ( for_each_node_by_name(n,e1) S | for_each_node_by_type(n,e1) S | for_each_compatible_node(n,e1,e2) S | for_each_matching_node(n,e1) S | for_each_matching_node_and_match(n,e1,e2) S | for_each_child_of_node(e1,n) S | for_each_available_child_of_node(e1,n) S | for_each_node_with_property(n,e1) S ) & i(es,n,...) S ) @@ local idexpression r.n; iterator r.i; expression e; expression list [r.n1] es; @@ i(es,n,...) { ... ( of_node_put(n); | e = n | return n; | + of_node_put(n); ? return ...; ) ... } @@ local idexpression r.n; iterator r.i; expression e; expression list [r.n1] es; @@ i(es,n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n @@ local idexpression r.n; iterator r.i; expression e; identifier l; expression list [r.n1] es; @@ i(es,n,...) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? goto l; ) ... } ... l: ... when != n// </smpl> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: mv643xx_eth: add missing of_node_putJulia Lawall1-1/+3
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27ath6kl: add missing of_node_putJulia Lawall1-0/+1
for_each_compatible_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression e; local idexpression n; @@ for_each_compatible_node(n,...) { ... when != of_node_put(n) when != e = n ( return n; | + of_node_put(n); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: phy: mdio: add missing of_node_putJulia Lawall1-0/+2
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; @@ for_each_available_child_of_node(root, child) { ... when != of_node_put(child) when != e = child ( return child; | + of_node_put(child); ? return ...; ) ... } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27netdev/phy: add missing of_node_putJulia Lawall1-0/+1
for_each_available_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_available_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: netcp: add missing of_node_putJulia Lawall1-2/+6
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27net: thunderx: add missing of_node_putJulia Lawall1-1/+3
for_each_child_of_node performs an of_node_get on each iteration, so a break out of the loop requires an of_node_put. A simplified version of the semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ local idexpression r.n; expression r,e; @@ for_each_child_of_node(r,n) { ... ( of_node_put(n); | e = n | + of_node_put(n); ? break; ) ... } ... when != n // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27ipv6: gre: support SIT encapsulationEric Dumazet1-1/+2
gre_gso_segment() chokes if SIT frames were aggregated by GRO engine. Fixes: 61c1db7fae21e ("ipv6: sit: add GSO/TSO support") Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27Bluetooth: Fix crash on fast disconnect of SCOKuba Pawlak1-0/+5
Fix a crash that may happen when a connection is closed before it was fully established. Mapping conn->hcon was released by shutdown function, but it is still referenced in (not yet finished) connection established handling function. [ 4635.254073] BUG: unable to handle kernel NULL pointer dereference at 00000013 [ 4635.262058] IP: [<c11659f0>] memcmp+0xe/0x25 [ 4635.266835] *pdpt = 0000000024190001 *pde = 0000000000000000 [ 4635.273261] Oops: 0000 [#1] PREEMPT SMP [ 4635.277652] Modules linked in: evdev ecb vfat fat libcomposite usb2380 isofs zlib_inflate rfcomm(O) udc_core bnep(O) btusb(O) btbcm(O) btintel(O) bluetooth(O) cdc_acm arc4 uinput hid_mule [ 4635.321761] Pid: 363, comm: kworker/u:2H Tainted: G O 3.8.0-119.1-plk-adaptation-byt-ivi-brd #1 [ 4635.332642] EIP: 0060:[<c11659f0>] EFLAGS: 00010206 CPU: 0 [ 4635.338767] EIP is at memcmp+0xe/0x25 [ 4635.342852] EAX: e4720678 EBX: 00000000 ECX: 00000006 EDX: 00000013 [ 4635.349849] ESI: 00000000 EDI: fb85366c EBP: e40c7dc0 ESP: e40c7db4 [ 4635.356846] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [ 4635.362873] CR0: 8005003b CR2: 00000013 CR3: 24191000 CR4: 001007f0 [ 4635.369869] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 4635.376865] DR6: ffff0ff0 DR7: 00000400 [ 4635.381143] Process kworker/u:2H (pid: 363, ti=e40c6000 task=e40c5510 task.ti=e40c6000) [ 4635.390080] Stack: [ 4635.392319] e4720400 00000000 fb85366c e40c7df4 fb842285 e40c7de2 fb853200 00000013 [ 4635.401003] e3f101c4 e4720678 e3f101c0 e403be0a e40c7dfc e416a000 e403be0a fb85366c [ 4635.409692] e40c7e1c fb820186 020f6c00 e47c49ac e47c4008 00000000 e416a000 e47c402c [ 4635.418380] Call Trace: [ 4635.421153] [<fb842285>] sco_connect_cfm+0xff/0x236 [bluetooth] [ 4635.427893] [<fb820186>] hci_sync_conn_complete_evt.clone.101+0x227/0x268 [bluetooth] [ 4635.436758] [<fb82370f>] hci_event_packet+0x1caa/0x21d3 [bluetooth] [ 4635.443859] [<c106231f>] ? trace_hardirqs_on+0xb/0xd [ 4635.449502] [<c1375b8a>] ? _raw_spin_unlock_irqrestore+0x42/0x59 [ 4635.456340] [<fb814b67>] hci_rx_work+0xb9/0x350 [bluetooth] [ 4635.462663] [<c1039f1e>] ? process_one_work+0x17b/0x2e6 [ 4635.468596] [<c1039f77>] process_one_work+0x1d4/0x2e6 [ 4635.474333] [<c1039f1e>] ? process_one_work+0x17b/0x2e6 [ 4635.480294] [<fb814aae>] ? hci_cmd_work+0xda/0xda [bluetooth] [ 4635.486810] [<c103a3fa>] worker_thread+0x171/0x20f [ 4635.492257] [<c10456c5>] ? complete+0x34/0x3e [ 4635.497219] [<c103ea06>] kthread+0x90/0x95 [ 4635.501888] [<c103a289>] ? manage_workers+0x1df/0x1df [ 4635.507628] [<c1376537>] ret_from_kernel_thread+0x1b/0x28 [ 4635.513755] [<c103e976>] ? __init_kthread_worker+0x42/0x42 [ 4635.519975] Code: 74 0d 3c 79 74 04 3c 59 75 0c c6 02 01 eb 03 c6 02 00 31 c0 eb 05 b8 ea ff ff ff 5d c3 55 89 e5 57 56 53 31 db eb 0e 0f b6 34 18 <0f> b6 3c 1a 43 29 fe 75 07 49 85 c9 7f [ 4635.541264] EIP: [<c11659f0>] memcmp+0xe/0x25 SS:ESP 0068:e40c7db4 [ 4635.548166] CR2: 0000000000000013 [ 4635.552177] ---[ end trace e05ce9b8ce6182f6 ]--- Signed-off-by: Kuba Pawlak <kubax.t.pawlak@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2015-10-27ipv6: icmp: include addresses in debug messagesBjørn Mork1-4/+8
Messages like "icmp6_send: no reply to icmp error" are close to useless. Adding source and destination addresses to provide some more clue. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27bpf: make tracing helpers gpl onlyAlexei Starovoitov1-2/+2
exported perf symbols are GPL only, mark eBPF helper functions used in tracing as GPL only as well. Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27bpf: fix bpf_perf_event_read() helperAlexei Starovoitov3-11/+22
Fix safety checks for bpf_perf_event_read(): - only non-inherited events can be added to perf_event_array map (do this check statically at map insertion time) - dynamically check that event is local and !pmu->count Otherwise buggy bpf program can cause kernel splat. Also fix error path after perf_event_attrs() and remove redundant 'extern'. Fixes: 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Wang Nan <wangnan0@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-27NFC: nfcmrvl: update device tree bindings for Marvell NFCVincent Cuissard4-11/+15
Align NFC bindgins to use marvell instead of mrvl. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add spi driverVincent Cuissard5-1/+271
This driver adds the support of SPI-based Marvell NFC controller. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: allow spi driver to choose transfer clockVincent Cuissard2-1/+12
In some cases low level drivers might want to update the SPI transfer clock (e.g. during firmware download). This patch adds this support. Without any modification the driver will use the default SPI clock (from pdata or device tree). Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: move generic spi driver to a moduleVincent Cuissard3-2/+7
SPI driver should be a module. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add i2c driverVincent Cuissard8-5/+353
This driver adds the support of I2C-based Marvell NFC controller. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: configure head/tail room values per low level driversVincent Cuissard4-9/+14
Low-level drivers may need to add some data before and/or after NCI packet. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: nfcmrvl: add firmware download supportVincent Cuissard7-10/+718
Implement firmware download protocol for Marvell NFC controllers. This protocol is based on NCI frames that's why parts of its implementation use some NCI generic functions. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27NFC: NCI: export nci_send_frame and nci_send_cmd functionVincent Cuissard2-1/+4
Export nci_send_frame and nci_send_cmd symbols to allow drivers to use it. This is needed for example if NCI is used during firmware download phase. Signed-off-by: Vincent Cuissard <cuissard@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 22:37:46 +0300